GY6 Ultimate CVT Transmission Kit - ART MEETS FUNCTIONALITY

No video

GY6 Ultimate CVT Transmission Kit - ART MEETS FUNCTIONALITY

Рет қаралды 12,710

Күн бұрын

BUY IT NOW:
www.rollingwre...
If you are looking for hands down the best CVT transmission kit money can buy, this is the kit. Comes with a Reveno clutch, ProBld variator, Kevlar belt, and forged pulley. This is the lightest and best performance kit on the market.

Пікірлер: 60

@jerbysantiago4911 Жыл бұрын

We Filipino used 13.5 degree variator or what we called pulley.were using also 2 way cam 6 hole torque drive and regrooved bell with dust hole and longer clutch lining for better performance.coz here in Philippines there's no reveno CVT set available. nice content❤

@RollingWrench Жыл бұрын

Very cool! You guys over there do some impressive stuff

@usererror1969 Жыл бұрын

love your stuff.

@mrbrowfromthehole 6 ай бұрын

Who's is the guy with the boxing glove hands,wow recovery..

@bradensmith888 6 ай бұрын

Why does this kit use rollers instead of sliders?

@brownslappy3479 Жыл бұрын

I wish you had 250cc parts. The ruckus can go as fast as me when its upgraded

@scarface4581 Жыл бұрын

Beautiful 😍

@dokesz530 6 ай бұрын

Looks fancy only wait until u drive it in the rain or hit a piece of rock.What make sense to drive with open cvt cover? Cooling is not an issue but what about air ressistant?

@RollingWrench 6 ай бұрын

This isn’t anything new. We have been running these open drives for 10+ years no issues

@bumwithakeyboard1360 Жыл бұрын

@Rolling Wrench, got a video on how to install the lower race over the triple tree to seat it properly? I bought your pro build triple tree not realizing I needed to install a lower race and it's got about a half centimeter to go before its seated all the way down and I cant get it to budge further down.

@nomarencarnacion6732 4 ай бұрын

Does fit in a yamaha zuma 2023?

@sheng_xin6620 Жыл бұрын

台灣之光，連我都在用reveno👌

@RollingWrench Жыл бұрын

Good stuff!!

@tonggarwin1838 Жыл бұрын

add on power booster👍😂

@patrickfargie1146 5 ай бұрын

I wonder if the Reveno variator would bolt up to the Navi

@RollingWrench 5 ай бұрын

No, since the Navi isn’t a gy6

@arrykusumo 9 ай бұрын

Question. How to tune the 2.0 clutch that need more rpm to engage? I like my clutch engage at low rpm just slight throttle twist, easier to ride in stop and go condition

@RollingWrench 9 ай бұрын

If you want more rpm put a heavier contra spring in. That’s step 1

@SmoothNobody Жыл бұрын

need clarification. what do you mean 1.0 is more aggressive? whats so great about the forged pulley? is it just weight? how much weight?

@RollingWrench Жыл бұрын

1.0 clutch Engagement is later in the rpm range resulting in a more aggressive take off. Forged pulley is nice a true and super light. I’ll have another video that goes more in depth this week. I have been working on the edit.

@PatrickMcLarn-df6mb Жыл бұрын

How much for this complete cvt with belt for 150cc scooter

@shorejiggingreunion6893 Жыл бұрын

This is an awesome stuff bro!! My gy6 need all 🛵, do you send réunion Island ?

@RollingWrench Жыл бұрын

I’m not sure where that is. Email us

@TheNewHights Жыл бұрын

Live tonight?

@LONGBLACKMOTO 8 ай бұрын

Sir question, is it possible that gy6 engine with stock ECU can be remap ? Is it possible?

@RollingWrench 8 ай бұрын

No unfortunately

@LONGBLACKMOTO 8 ай бұрын

@@RollingWrench thank you sir.

@Snakekeeper243100 Жыл бұрын

May as well ask you because I can't find the info! I need to get a total build manuel for my scooter mainly the GY6 engine / drive train. Do you have one or know where I can get one ASAP

@RollingWrench Жыл бұрын

Become a diy library member I have those detailed video in there

@MarkCombs-cb3sv Жыл бұрын

Does this fit a yamaha riva 125

@CokieZip Жыл бұрын

Hey. i have a question. i have a 50cc gy6 that im planning on completely rebuilding and tuning to 90cc. if i do so is there a higher risk of blowing it up? as it currently sits its very illegal so it blowing up on the road would be a big problem.

@RollingWrench Жыл бұрын

Anytime you increase the performance you decrease the reliability. With that said they are pretty dang reliable

@CokieZip Жыл бұрын

@@RollingWrench is there a certain break in period i should worry about? or can i just gun it the second i install it

@MindKontrolleProject Жыл бұрын

Have you ever used a racing oil such as AMSOIL DOMINATOR 10W-30 in a 49cc stock"ish" scooter? 49cc's seem to always be running at high RPM's do to their limited horse power. Not sure if it's OK. Will the high temp viscosity of 30 and the anti-wear additives cause issues? Thanks 🛵

@haruyoshida5417 Жыл бұрын

How long reveno will last on a bore up engine like 195cc? I really wanna buy 1 for my aerox 155 and my engine is a 195cc..

@RollingWrench Жыл бұрын

Yes it will. I have had one in my 232cc for 3 years

@kennethsimbapuppyeyes6857 Ай бұрын

How much for this with the clutch and pully

@RollingWrench Ай бұрын

www.rollingwrenchdenver.com/products/gy6-cvt-kit-reveno-clutch?keyword=reveno%20gy6

@AC-jh3pn 9 ай бұрын

Will these fit on a Honda Navi?

@RollingWrench 9 ай бұрын

No, but this will: www.rollingwrenchdenver.com/products/honda-navi-reveno-cvt-kit?_pos=1&_sid=02f03027b&_ss=r&variant=43253416919269

@julioreyes4360 Жыл бұрын

Do they have the 2.0 for Honda Dio AF18?

@RollingWrench Жыл бұрын

Ya, we should have more in 3 weeks www.rollingwrenchdenver.com/products/copy-of-gy6-reveno-clutch?ToPasteboard

@polized123 Жыл бұрын

Hi is that Kit Compatible with Honda Beat FI V2 2019

@RollingWrench Жыл бұрын

Not that kit but this one is: www.rollingwrenchdenver.com/products/the-ultimate-honda-ruckus-50-cvt-kit-reveno-clutch?ToPasteboard

@richardcung8634 Жыл бұрын

will it work on a stock maddog 150cc??

@RollingWrench Жыл бұрын

Yes

@lomtiptak9519 Жыл бұрын

How is the wear on the Reveno clutch disks?

@RollingWrench Жыл бұрын

I’m still running the same clutch from 3 years ago in my 232cc gy6. They last along time

@lomtiptak9519 Жыл бұрын

@@RollingWrench good to know. Definitely want to try them out.

@iamjeromeflores611 Жыл бұрын

Is this for 50cc or the 150cc?

@RollingWrench Жыл бұрын

150cc-232cc

@agipu Жыл бұрын

我是台灣人，看到台灣的改裝品牌在這裡，我真開心但是您的皮帶安裝反了，字面要朝向自己才是正確的。

@RollingWrench Жыл бұрын

This belt is Bi directional. Belts that are one way will show a arrow.

@BattShytKuhraezy Жыл бұрын

😎 🆒️

@dashobie Жыл бұрын

Dork minibike,get a real bike if you can handle it get a harley

@RollingWrench Жыл бұрын

Don’t be dumb lol I have a Harley too.

@synoptic1047 Жыл бұрын

Slammed🤣🤣.

@dashobie Жыл бұрын

It's a Toy,get a real motorcycle.

@RollingWrench Жыл бұрын

I know your breed. If I had to guess you have a Harley right? One of the basic human needs is the need to feel significant. I’m pretty sure that’s the case here

@polized123 Жыл бұрын

A big man's toy btw. Its much more fun making a small scooter to be faster and better. Having. Big bike that is already fast seems boring. There is no excitement to be expected since it is already expected fast.