🤔 What's so special about Nissan SR20DET

🤔 What's so special about Nissan SR20DET | TECHNICALLY SPEAKING

Рет қаралды 209,910

Күн бұрын

#nissan #SR20DET #haltech
If you're a JDM fan you'll probably agree that the 1990s was the golden age for Japanese performance engines. We got the 2JZ, the RB, the 4G63 as well as the Honda K-series. All over-engineered, and all capable of producing power well above their factory spec. But there’s another engine that we haven’t covered yet and one that definitely belongs in that group - Nissan’s SR20.
Note: this is a fairly long video so if you want to skip to the engine teardown, use the Chapter markers below. Enjoy:)
-----------------------------------------------------------
00:00 Introduction
00:36 SR20 history
02:01 SR20 good for big horsepower?
03:05 SR20DET generations
04:52 Best SR20DET to get
05:13 Things to watch out when buying a used SR20
06:21 SR20DET Mods
09:09 Learn how to build an SR20
09:24 Engine teardown
----------------------------------------------------------
Like this video? Here are more like it:
- What's So Special About Subaru EJ: • 🤔 What's so special ab...
- What's So Special About Mitsubishi 4G63: • 🤔 What's so special ab...
- What's So Special About Honda K-series: • 🤔 What's so special ab...
- What's So Special about Toyota 2JZ: • 🤔 What's So Special Ab...
- What's So Special About Nissan RB: • 🤔 What's so special ab...
- What's So Special About GM LS: • 🤔 What's so special ab...
- What's So Special About Ford Barra: • 🤔 What's so special ab...
------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~

Пікірлер: 366

@haltech Жыл бұрын

A quick note: this is a fairly long video so if you want to skip to the engine teardown, use this link: kzfaq.info/get/bejne/ldNlf8qdq7CRZH0.html If you're a JDM fan you'll probably agree that the 1990s was the golden age for Japanese performance engines. We got the 2JZ, the RB, the 4G63 as well as the Honda K-series. All over-engineered, and all capable of producing power well above their factory spec. But there’s another engine that we haven’t covered yet and one that definitely belongs in that group - Nissan’s SR20. ... ---------------------------------------------------------- Like this video? Here are more like it: - What's So Special About Subaru EJ: kzfaq.info/get/bejne/aK91nKRnyMjYc5s.html - What's So Special About Mitsubishi 4G63: kzfaq.info/get/bejne/gJ2bbJiklbGRe5c.html - What's So Special About Honda K-series: kzfaq.info/get/bejne/pLBjp8982LbKfJs.html - What's So Special about Toyota 2JZ: kzfaq.info/get/bejne/hbOgh7iY0KfHn3U.html - What's So Special About Nissan RB: kzfaq.info/get/bejne/irljmal9zJi1lok.html - What's So Special About GM LS: kzfaq.info/get/bejne/rbOKepqfq96RYoE.html - What's So Special About Ford Barra: kzfaq.info/get/bejne/nrBmgpSi07PRkZ8.html --------------------------------------------------------

@F4Insight-uq6nt Жыл бұрын

Just talking 4 Cylinders and 2 Liters which is best overall. K20 or SR20?

@hpa101 Жыл бұрын

9:11 - Thanks for the great, detail-packed video and cheers for the engine building course mention team! - Taz.

@haltech Жыл бұрын

^^ Can confirm it's well worth doing:)

@nicoxis Жыл бұрын

thoughts on rocker arm stoppers?

@rcm57238 Жыл бұрын

i remember that hpa mentions the sr20 a lot in their courses as being really sensitive on the limiter. if you're using rpm limit launch control strategies, you can use fuel cut instead of ignition cut. i guess maybe the boost build up at launch won't be as good (depending on the turbo size and boost aims) but destroying the engines also isn't very pleasing

@aksfactory Жыл бұрын

Rocker Arm Stoppers are a pretty controversial topic. I would much rather suggest looking into dual guide mod first. It really helps with the rocker issue.

@griplimit Жыл бұрын

Exactly, dual guide mod, stronger valve springs, and a softer fuel cut limiter, as well solid lifters don’t hurt either. Rocker arm stoppers do not stop rocker arms from falling off and when they do… it does damage!

@supers0nic77 Жыл бұрын

Or do the neo vvl head swap

@ryantweddle3167 Жыл бұрын

Ask Okichan from Yashio factory in Japan if he recommends rocker stoppers😂. Answer is no and he's the Sr God.

@wrx2hot4u Жыл бұрын

Rocker stoppers …. errrrrr NO, they are such a joke. If you look at the engineering and how the valve trains works they cant do shit :/ they dont actively hold the rockers in place. If a rocker wants to jump off, it will and most cases the “stopper” simply jams the rocker arm cause it to smash or bend a valve.

@therig1339 Жыл бұрын

@@ryantweddle3167 facts

@mattyallwood Жыл бұрын

Great episode. Nice work team

@feenyx6394 Жыл бұрын

Love these teardowns, I learn so much! Great shots, great editing, and fantastic explanations

@aviatorix8805 Жыл бұрын

I've been looking forward to an episode covering the SR20 and I'm stoked it's here

@headchef5680 Жыл бұрын

Sr20's are fantastic. They can take a lot of abuse, especially at stock or close to stock power levels. When people start pushing them at power levels they were never designed for they have issues. I have a black top sr20det and a sr20de, the only thing ive had "fail" is a timing chain tensioner on the sr20de that wouldnt hold oil over night so the chain would slap on startup. I think people have to remember they arent new engines anymore.

@peppylafew116 4 ай бұрын

It just sucks now because parts are taxed up the ass and as an American (who btw loves this motor) it’s really hard to justify spending 5k (low end for notchtop prices in North America) on motor and 5k more to build it only to reach

@SR22VET-S15 Ай бұрын

Correct, with bolt ons and 360whp they will take alot of abuse as long as a soft cut limiter is used and the rpms are kept around 7500, the valve train is notorious for having issues but its easy enough to solve the issue with dual guide mod and correctly shimming them. As far as built motors go, 650whp is about the limit before you start to have issues with things like main caps cracking, crankwalk and would have to start looking at things like sleeves, billet main caps and billet girdles to tie the bottom end in. At 600whp or so they will still do well plenty of time attack and pro drift cars go well with that amount, the 7-8-900hp motors turning into more drag motors and needing far more more work to hold together. People forget the s chassis that these engines were intended for a so small and light they dont need a heap of power to get good performance from, whether with 360whp for beginners all the way up to 600whp for the pros and thats about as much as it was ever intended for when you pull the motor apart and see what they look like from the inside.

@CoreysZ32 Жыл бұрын

Great video!! Thanks for all the detail

@bretwilkey3903 10 ай бұрын

Love the knowledge and insight in these videos. 22 years of S15 joy 🤩 and loving every minute

@hammertimee777 Жыл бұрын

I bought my first SR20 in 2004. It was already fairly old back then. Mine had various oil leaks and gasket issues. I cannot believe people are still running them 20 years later!

@fantastic1921 Жыл бұрын

Fantastic engine when looked after.

@AnonyDave Жыл бұрын

Because the one I'm running today was only nearing on two years old then

@johnma807 Жыл бұрын

Same. I havnt looked at car stuff in a decade. Surprised an SR20 is still talked about. From what I understand ppl are swapping Honda K20s now since there are so many to salvage from domestically, and are better designed.

@pierreherpeto3712 Жыл бұрын

I still daily drive my 308k km (approx 191k miles) SR20 wich is covered by oil (rust prevention?)👍

@charlesbronson7618 10 ай бұрын

I have a forged black top with 1200 miles on it in an s13 disco, love it.

@JakeTheBear1 Жыл бұрын

Hooray new engine review! ❤️

@seandavey7085 28 күн бұрын

Thanks for another great informative video.

@libmananchannel Жыл бұрын

Hello ”Haltech”! Thank you for showing us such a wonderful video! I feel so happy! I'm looking forward to your next work! Have a nice day!

@ethansmith8241 Жыл бұрын

awesome stuff really good video and heaps of detail

@haltech Жыл бұрын

Glad you've enjoyed it.

@richlee4847 11 ай бұрын

love these videos mate , very good job

@o0bananaman0o Жыл бұрын

thanks for the video. Learnt more about my motor in 26mins than all my years trolling forums

@TrackSol 5 ай бұрын

Excellent video. Thanks for the tips.

@5chum1 Жыл бұрын

Great video and thank you for the in-depth tear down. I’ve owned my SR for coming up to 15 years now and it’s not missed a beat and is always a joy to drive, though seeing another one on the road is getting rarer.

@AnonyDave Жыл бұрын

I think I've had mine for about that long too. One engine, neve missed a beat. Probably helps that I kept it stock, but even like that it's still a tonne of fun for something that only gets driven fairly rarely

@5chum1 Жыл бұрын

@@AnonyDave I've got mine running Stage 1a at just about 270bhp and for a daily use it is perfectly adequate. At the time of the upgrade I thought about going Stage 2 but couldn't really justify all the extra upgrades required.

@doriftuh7331 Жыл бұрын

Love haltech you guys rock!! Once I get my money up im having my car tuned with all your products!

@gotsauss Жыл бұрын

This is fantastic!!! So detailed! Thank you!! 🎉

@paullewiso7870 Жыл бұрын

Great video, about a year a ago I picked up a 1996 200sx se-r and even though she's at 250,000 miles still runs strong. Only thing I've done to her is a water pump and timing kit. Getting ready to start playing more inside that engine, and this has been a pretty comprehensive video for me to work off of. Thanks!

@ryano8613 Жыл бұрын

Rad little car!!

@imsim6064 Жыл бұрын

Great video Scott. Crazy to thing we might see new SR20 long motors available again :D

@richardclarke207 Жыл бұрын

Here in the uk, we call the s14/s15 Sr20det a “bent-cam” and the s13 180sx “straight-cam” 👍🏻

@allturbo9 8 ай бұрын

Great video! Sr20 is a diamond I’ve boosted my front wheel drive Sentra from na to built internals and bigger turbo over the years and she puts a smile on my face every time , she’s a keeper. I still own it today 👍

@JuicyJLee 2 ай бұрын

Are you from South Africa? We love fitting the VE into the Sentra

@milldinho Жыл бұрын

Finally. What I’ve been waiting for

@01FozzyS Жыл бұрын

I nerd out on Tuning Fork's videos.

@haltech Жыл бұрын

Hehe, don't we all...

@ke1tecX Жыл бұрын

The first time i ever saw the SR20 it was in an E30 & I'll never forget it

@POVShotgun 4 ай бұрын

weee i got one

@ChrisDavis333 3 ай бұрын

I seen one in an old Nissan hardbody truck.. I’m not sure what year but it was sweet, probably early/mid 90’s, it was slammed and had big chunky tires with the right amount of camber, and it had wide body fenders. It was stancey but still functional if that makes sense.

@elliot8264 Жыл бұрын

The SR in the GTI-R was unique because it had quad throttle bodies

@beachforestmountain4269 Жыл бұрын

In the video he said that early SR20DET engines had a t25 turbo, but that's not accurate because in the GTI-R it used a t28 turbo.

@haltech Жыл бұрын

He was referring to the S13 engine, in the context of the front engine - rear wheel drive config. But yes, you are correct the GTiR used a number of different components in the engine, turbo being one of them.

@beachforestmountain4269 Жыл бұрын

@@haltech That turbo worked very well in the GTI-R. It spooled quicker than the smaller t25 in the rps13 setup. Do you know why that would be? Is it because the GTI-R had a shorter charge pipe from having a top-mount intercooler, wheres the rps13 has a side-mount intercooler with a longer charge pipe?

@Sigfader180 Жыл бұрын

@@beachforestmountain4269 GTiR variant had a surprisingly large amount of differences. It runs lower static compression (same pistons, but no quench pad on the combustion chamber), solid lifters / different cam profile, and runs different base ignition timing, as well as the ITB setup. Would be hard to say how each change contributes to performance

@beachforestmountain4269 Жыл бұрын

@@Sigfader180 Thanks. My old mate got the first GTI-R that arrived in New Zealand, he imported it himself before anyone had even heard of them. It was super fast back in those days. It had an exhaust and air filter, but not sure what boost it was running. I think they ran 12 psi standard, if I remember correctly. Whereas the sr20det in my rps13 180sx was running about 6 to 7 psi standard.

@futurecat Жыл бұрын

I had two of these, and i agree. Lovely pull, lovely exhaust note.

@juanc5149 Жыл бұрын

Wow, this man here doubled down on the rocker arm stoppers. Wow, just wow.

@2loudspeakers 8 ай бұрын

great video!

@djbrooksy05 Жыл бұрын

When you said In the bin at the end, I was waiting for Marty's face to pop up 😂😂

@nolesy34 Жыл бұрын

TOASTIE!

@mii3000 Жыл бұрын

This content is really cool it would be nice to talk about other JDM brands too

@haltech Жыл бұрын

- What's So Special About Subaru EJ: kzfaq.info/get/bejne/aK91nKRnyMjYc5s.html - What's So Special About Mitsubishi 4G63: kzfaq.info/get/bejne/gJ2bbJiklbGRe5c.html - What's So Special About Honda K-series: kzfaq.info/get/bejne/pLBjp8982LbKfJs.html - What's So Special about Toyota 2JZ: kzfaq.info/get/bejne/hbOgh7iY0KfHn3U.html - What's So Special About Nissan RB: kzfaq.info/get/bejne/irljmal9zJi1lok.html

@HotSneks 4 ай бұрын

This was awesome! Do the GOAT'ed supersonic trumpet VQ Engine next please. 😁😁🎺🎺

@NissanR33Ztune Жыл бұрын

Lucky enough I have a Nismo tuned ECU in mine and it’s got a soft limiter setting that has been awesome. Definitely does feel like it has a fuel cut within that setting buts it’s more or less rocket proofed the SR, it’s just nice hits the limiter your feel a very soft bounce and then you feel like you’ve lost power if you don’t shift. Guess they knew of the issue and addressed it with the ECU.

@elijahtheprophet963 9 ай бұрын

A video on the Fj20det is a must now that youve done a sr20det video.

@bakihanma7247 5 ай бұрын

What are those?

@MiguelAntonioCastillo Жыл бұрын

My first engine. My first car Sentra SE-R. How I judge all the engines in the cars I drive after that. Thanks for the video!

@Randy-lg1qo Жыл бұрын

VW/Audi 1.8T from the same era was awesome - so much power so easily. Above the Japanese 2.0’s and Aussie V8’s of the day. Had one for 20 years, running 27psi and never had an oil leak or any issue

@_YahMez 8 ай бұрын

Love your k series video and showed my friend who loves the srt-4 dodge neon, if you’d be interested in doing one for those! Much love!

@FlowerPowerNZ Жыл бұрын

It was a good engine for its time and I had 2 cars with 1.8 and 2L variations. I now have a newer model with the HR-series and its quite an upgrade tech wise.

@hotworksfab Жыл бұрын

Very much recommend not to use rocker arm stoppers and to correctly measure your intake shim heights to level the rockers (precision shims make different height guides if you feel the need to do dual guide shims) and fit a new spring oe spring or aftermarket upgraded spring. Ideally, new lifters as well but these in conjunction with a soft ignition cut should help avoid breaking any arms.

@BriZee33 Жыл бұрын

Rocker arms stoppers have only ever broken more stuff when the arm DOES try to fling loose compared to when it just pops out usually.

@LePedant Жыл бұрын

Here in the US, we only got the FWD SR20DE. It only came in two cars, the Sentra SE-R and Infiniti G20(A rebadged Primera GT). :(

@Fredrick656 Жыл бұрын

Sucks to be American 🤣

@Chukijay Жыл бұрын

There’s also another engine that’s STILL not on anybody’s radar; the venerable KA24E/DE. Monster engines when you dig into them.

@x808drifter Жыл бұрын

Often laughed at as being a "truck motor'. But those who know, know. Would rather have a KA24DET than a spun bearing. XD

@batman3698 Жыл бұрын

Oh wow, for a brief moment I thought this was one of those videos which just reads the wikipedia page of said engine, because of the thumbnail. But it was actually an interesting video from haltec with tuning fork

@KrGsMrNKusinagi0 Жыл бұрын

had a redtop.. really didnt see anything better than the 3sgte and i loved that motor still have it in my FWD AE92 converted

@menace2society00 5 ай бұрын

AE92's are so slept on, body style gives me big Rx7 FC vibes

@ChrisDavis333 3 ай бұрын

Man this brings me back to high school where me and my friends had all these plans with these engines

@lukealadeen7836 2 ай бұрын

We're you gonna go to Race Wars?

@max-zo5ew Жыл бұрын

Thank you Im new Sub :)

@nathanpeachs2704 Жыл бұрын

First witnessed this beauty's power in my buddy's GTI-r wow😂😮

@ianyates8483 11 ай бұрын

I ran a n/a roller rocker sr20de in a n15 chassis up to 192whp. 8.5k redline. Awesome.

@thecloud1432 Жыл бұрын

the K series wasnt debuted until 2001. but we still had the legendary B18C and F20C from honda in the 90s

@andreasmikoleiczik6120 Жыл бұрын

Rocker arm stoppers are the worst. Back in 1998 i came up with the dual grooved shimmed setup. You will need to machine the rocker arm to get this setup done. The best way to stabilize the SR head setup is. High pressure VE oil pump this keeps the lifters less likelyto colapsr, 98 and newer roller rocker SR hydraulic lifters which have the larger oil inlet hole and smaller top exit hole, aftermarket springs and the dual guide rocker arm setup. Nice youtube video. I have been working on SRs since 1992.

@conradsealy9603 Жыл бұрын

Forget rocket arm stoppers. By now most people should know about the dual guide shim mod.

@nolesy34 Жыл бұрын

Shimmy shimmy yay shimmy yay gimme the Mic so I can take it away

@conradsealy9603 Жыл бұрын

@@nolesy34 😆😆

@asdowo111 Жыл бұрын

The Nissan Silvia's heart

@thatopendiffdude9109 Жыл бұрын

A video about the CA18DET would be great

@areid1440 Жыл бұрын

I've been waiting...

@damienelsworthy4720 Жыл бұрын

So my built S15 did make 474kw@wheels on 32 pound. Was a great car

@johnjays13 5 ай бұрын

I had a built red top with a normal oil pan and had oil pickup issue….luckily my buddy new right away after first start up and no damage was done😅

@rd.3696 Жыл бұрын

Had a sr20det 1992 bluebird U13 manual.Torquey engine,went well.

@ca9968 Жыл бұрын

The Opel C20XE was another monster of an engine from the 90`s...

@nzuncovered1845 Жыл бұрын

What do you guys think about converting the rocker arm bolts to studs? I heard they do this in Japan

@KiranSingh-lf5zk Жыл бұрын

I got the most basic and neutered version of this engine and it still amazes me to this day

@griplimit Жыл бұрын

I do not recommend using “Rocker Arm Stoppers”. If you throw an arm it will do more harm!

@cherrrry40 Жыл бұрын

Completely agree, It completely destroyed my head when I threw rockers with the stoppers on. Took them off and it just pops out, no biggie

@michaelgough9256 Жыл бұрын

What about the early sr20’s NA’s in the SSS pulsars. ?😊

@JJKdat Жыл бұрын

Rather than a fuel cut rev limit, can the Haltech do a soft limit with a DBW throttle body instead?

@PainIs4ThaWeak85 Жыл бұрын

Uhh, Honda's K series engines came to market in the 2000's. Not the 90's.

@robertneak8613 Жыл бұрын

Wow they made it so easy now a day with plug and play ECU then back in the day when i put in my first sr20 in my s13 like 20 years ago it was tough back then but now it seem easier now a day.

@Drunken_Hamster 2 ай бұрын

Is there any video comparing all the modern/semi-modern inline 4s? As in, taking into account all aspects. Stock internals, stock head efficiency, ported head efficiency, aftermarket parts availability for beefier stuff, stock block limits, sleeving cost, engine weight, junkyard pull-ability, ease of converting say, a high compression hybrid/Atkinson variant into a high-performance variant, engine swap kit availability for various chassis and transmissions, etc? I'd really like to see a deep dive on K series vs Ecotec vs Duratec vs SR vs 4G vs 2AR, etc. And TBH same for V6s, too. We need more V6 builds and good V6s in the world. Not every engine bay can fit an inline 6 (especially of substantial displacement) and not everybody can accept the limits of a 4-cylinder nor does that same crowd necessarily want the liability, complexity, and either excess power or underutilization of boost that an 8-cylinder provides. Not to mention, the inline 6s of old are heavy iron ordeals that are legit worse than an LS engine, and the modern inline 6s? Expensive and rare. Except for the Vortec 4200 or OM606, but then we're back to the "too long" part.

@hondaCivic_hatch 7 ай бұрын

Planning to put a sr20det in my Nissan avenir🙏

@nigelmcclure6440 Жыл бұрын

What exactly is the website for the SR20DET Creat Engine that you guys talked about on this video

@TURBOTRISTO Жыл бұрын

K series came out in 2001 not quite the 90s but close enough ❤❤❤

@14dose Жыл бұрын

Was planning on stripping my motor back and changing the timing chain, will this require the motor to come out as stated the pan and lower sump needs to come off is this true? Or will I be able to change it in the vehicle

@nickpreston7187 Жыл бұрын

So, is there any difference between the actual blocks from s13/14 to s15? If I got an s13 block could I just put s15 parts in it?

@harrynelson9203 Жыл бұрын

I was half way through writing that quote till it came up 🤣🤣🇬🇧🇬🇧

@martykath4427 Жыл бұрын

What? no comment on the main bearing cap girdle? Then again it's not like it's a k motor. Can oil squirters be easily fitted to an N A engine? I have a Serena van one with rear distributor and rear facing throttle body . Will that work in a longitudinal application?

@benjaminbenjamin4597 Жыл бұрын

Let’s see a comparison to the earlier FJ20et engine. 😁

@nolesy34 Жыл бұрын

A jet engine?

@user-wv6mx8dr1f 11 ай бұрын

We got the SR20DE altima here in the Philippines, the US got also the SR20DE on the B13 and the B13 GT-S got the SR18DE.. which was a shame, i wished for the SR powered B13 here in the Philippines but we got a GA13DS, GA14DS, GA15DE, and GA16DE B13/B14

@ohyeahyeah562 Жыл бұрын

So is the sr20det the same motor as the N/A Version that was found in the sentra and some infinitis?

@Hachiae Жыл бұрын

i would love one of these for the 16v 4AGE

@nolesy34 Жыл бұрын

YES supercharged little rockets

@REPOMAN24722 Жыл бұрын

Mine had had 500k on it before I sold it, didn't burn a drop and a smooth torque curve, went hard for a NA stock. n15 sss

@bluboy484 Жыл бұрын

We need a what's so special on the Honda B - series

@sam-ib7xm Жыл бұрын

Rocker stoppers do such a good job at keeping the rocker arm in place the arm breaks because they are fragile. You cant stop it from spitting rocker arms its fair easier to fix with out rockers stoppers. If it spits and arm worth out a stoppers its rare is breaks and cant be fixed easy. Stoppers will nearly 100% of the time break a broken arm when it happens. Taper the torque curve at the top of the rpm, soft limiter and 2 step or antilag if you got the time to be re fitting the rocker arms. If you are building making both shims locater shims makes a better difference then stoppers. Thats my 2 cents

@hotworksfab Жыл бұрын

Correct valve springs and correctly shimmed to keep the rocker flat on the cam is also going to massively help stop throwing rockers.

@hotshtsr20 Жыл бұрын

Campaigned an SR20 and later SR20DET for nearly a decade in wheel to wheel, and have run one for decades in Offroad stuff. Made 462whp in a street car, revved the racecar to 8,000rpm, etc. Only time I ever chucked a rocker arm was when my buddy misshifted from 3rd to 2nd. Quality valve springs and matching cam (I only run JWT) and you’ll be fine.

@lobotomyy Жыл бұрын

My rocker arms still broke even tho i had no rocker arm stopper. But if i had one it wouldve probably jammed the valves open and bent a valve . New rocker arm was 60-70bucks and an hour of work . Ditch those rocker arm stoppers they really make it worse 👍🏾

@ShineRTLni 6 ай бұрын

11:30 Funfact, the CA18ET out of the S12 had sensor there, they went cheap for the S13 onwards....

@not12listen Жыл бұрын

Prior to this video, I knew very little about the SR20, beyond the basics - 2.0L, dual overhead cam, etc. This has been really enlightening! Any chance of doing a similar video for the 3SGE/3SGTE? :)

@andersjjensen Жыл бұрын

A cammy SR20 also happen to sound really good.

@omardrifts2410 Жыл бұрын

Could you guys do one on the Mercedes M104

@Enderkilla101 Жыл бұрын

I swapped an sr20det into my 89 sentra. If it had wings it would've taken flight. Super fast lil car after the swap

@TheGoodMedicine Жыл бұрын

TBH I never liked to drive my car until I got an aftermarket ecu, 350z coils and ID850cc injectors. I hated the maf and its problems.

@haltech Жыл бұрын

That applies to just about any car though; modded car > stock car:)

@TheGoodMedicine Жыл бұрын

@@haltech I had a 2jz S13 but that's sums it up, maf car with apexi done me great.

@juanc5149 Жыл бұрын

@7:23 Rocker Arm stoppers are a bad idea. They won’t stop rocker arms for falling. But it will guarantee that the rocker arms get wedged between the camshaft lifters, shredding them into pieces. Where without rocker arm stoppers there is a small chance the rocker arm just falls off.

@Hashtagsixty6 Жыл бұрын

Will a vvt head fit on a straight cam block?

@Grainsauce Жыл бұрын

Any links to that Haltech engine plug in play ecu and harness?

@haltech Жыл бұрын

www.haltech.com/product-category/nissan/

@tomjom4865 6 ай бұрын

can you use the fwd version in a rwd application

@boostedmaniac Жыл бұрын

I wish the USA got a 240SX bodied SR with turbo. Instead we got stuck with that passenger 2.4L that was shared with the Stanza.

@GONER013 Жыл бұрын

i had a sentra ser with a sr20 na super fun

@otis3500 Жыл бұрын

Hey, how much horsepower can the sr20vet safely handle and can it be made with the stock turbo or will a bigger turbo be necessary?

@wouldntyouliketokno1631 8 ай бұрын

500 all day with lots of upgrades and bigger turbo

@drewski5730 Жыл бұрын

For the next episode do a rotary plz and tnx.

@haltech Жыл бұрын

Oooh, yeah. We'll keep that in mind!

@justinphillabaum4245 10 ай бұрын

Still have my redtop, but needs a tune to get running

@eVoLewis 4 ай бұрын

thought i spun a bearing in my sr but it was the lifters dried out due to sitting to long

@Za3DoRzX Жыл бұрын

Is the main difference between FWD / RWD is the configuration of piping for the chassis? Could theoretically put the FWD engine in a RWD application?

@blackgazex5873 Жыл бұрын

Nope, not even close to working

@Ryan-hf9qz Жыл бұрын

Engine mounts are different too, the whole block is different

@carllourenznaidoo2470 Жыл бұрын

Sr20det 4 Life