Hand Engraving side Air Cleaner cover for Harley Davidson

Рет қаралды 43,127

5 жыл бұрын

Here is a start to finish hand engraving video of how I lay out my style engraving scroll design. Please enjoy, share & don't forget to subscribe to my channel.
Thank you,
Hernan "Engrave It"

Пікірлер: 99

@tedbundy8087 2 жыл бұрын

Beautiful work friend, one Master class thanks friend thanks thanks

@chikowhitey Жыл бұрын

great video mate, thanks for sharing

@davesleyer9393 4 жыл бұрын

Best video I’ve found on engraving so far! Thanks for making this.

@engraveit5811 4 жыл бұрын

Dave Sleyer very happy to hear this. Thank you

@davesleyer9393 4 жыл бұрын

Engrave It any advice on what to equipment to buy getting started? Long story short I’m a biker and tattoo artist but was in an accident last year and severely injured my right arm. It doesn’t bend good enough to tattoo anymore and I think engraving is my best bet to keep the creativity going. Thanks for the reply

@engraveit5811 4 жыл бұрын

Dave Sleyer I would GRS tools is the ticket. Now is it the arm you would wright with?

@davesleyer9393 4 жыл бұрын

Engrave It yeah it’s my writing arm I can still tattoo and even work out with it. The problem is it locks up when I’m tattooing and I can’t reach back and forth from my canvas to my ink cups. It sucks for me but it’s worse for my canvas because I’m slow as hell now. I just got my tax return and I’m planning on getting a vice and an engraver ASAP!

@tedbundy8087 2 жыл бұрын

Beautiful work brother

@chrisgerber6281 4 жыл бұрын

Stunning job. I had my reservations at the start by you nailed it.

@engraveit5811 4 жыл бұрын

chris gerber thank you

@chrisgerber6281 4 жыл бұрын

Engrave It Just for interest sake. How expensive is it to have say similar covers engraved. It is such bad ass custom look. Seems quite popular in the US. Not that common in Europe.

@engraveit5811 4 жыл бұрын

chris gerber prices vary they start at around $250.00 US and up. If you’d like you can email for exact price sales@engraveitinc.com

@kingallsup4 5 жыл бұрын

Aye the art on your walls ARE ALL BADASSS I just started engraving and I think I'm pressing too hard the tip of my finger is been going numb lol. Much props bro

@engraveit5811 5 жыл бұрын

e allstar you should have to press that hard. Thank you

@user-nq9js8oh5g 8 ай бұрын

How is it going now, my friend? Are you still carving?

@marcberg1762 3 жыл бұрын

Great job love your work 👌🏼 Iam still playing and testing with my Dremel and GRS set to see how I can work with these. Now Iam looking for different chisels or how to make them myself. TC 👊🏼

@engraveit5811 3 жыл бұрын

Thank you 👊🏻😎👍🏻

@justinturner4850 2 жыл бұрын

Awesome:) I’ve always loved seeing engravings on motorcycles. I finally had the courage to paint my bike and it came out great. Next I wanna take a shot at engraving my rocker boxes, derby cover etc. How much money should I expect to throw down to buy everything I’d need? I have a compressor already but what’s a good direction to go for an entry level setup?? Thank you! Happy holidays from Maui.

@joselacera8716 4 жыл бұрын

WOW

@liammcdonnell2504 3 жыл бұрын

I'm also pretty decent at making chisels from W1 tool steel ... Was thinking bout making some and trying hammer end chisel ... Probably be ok for aluminum

@edwardcoronado4729 10 күн бұрын

What is the best engraving machine to get or use

@MR-io4um Жыл бұрын

Hello, nice work!!! Wich engtaver are you using, because mine is damaged and looking for a new one..

@FRDSautomotive 11 ай бұрын

hello friend, I'm from Indonesia, I want to ask what tool you use

@seandompe7300 2 жыл бұрын

Wow your a bad ass i wish i had the skills and attention

@engraveit5811 2 жыл бұрын

Thank you

@davemcaferty6347 6 ай бұрын

Great video. Where would I get an ingraver like the one you are using

@tonosk842 Жыл бұрын

Excúseme what kind of machine di you use for this?

@eight-dg3oz Жыл бұрын

What hand piece are you using for engraving

@colinjeffrey8787 4 жыл бұрын

hi. how come the cutting tool only cuts the surface and not deeper..is it the angle you use.. or does the tool only cut a certain depth.. please excuse my ignorance..p.s. great video such an inspiration to budding followers. .many thanks from the uk..cheers best regards

@engraveit5811 4 жыл бұрын

colin jeffrey don’t think the video shows how deep this is compared to a typical metal engraving done for car and motorcycle. This is deep engraving without having to remove all the back ground. We triple chrome parts after we done with a good amount of copper and nickel, chrome and it does not cover the engraving.

@MR-io4um 10 ай бұрын

What kind of sjissel you use?

@jasonjones531 2 жыл бұрын

hi, great instructional video. Can i ask what geometry you use on the graver? Flat or v shaped?

@engraveit5811 2 жыл бұрын

Thank you V shape

@KingSaltine615 5 жыл бұрын

What is the best graver/bits to start with, with out spending thousands off the rip

@engraveit5811 5 жыл бұрын

RevolutionStudio615 unfortunately average cost to get a quality engraving setup is between $2,500-3,000.00

@ReelCatcheeeHi 3 жыл бұрын

@@engraveit5811 what type of ingraver are you using

@engraveit5811 3 жыл бұрын

Grs

@Estudillo860 2 ай бұрын

Como le sacas filo a tus puntas

@edmondsarvarian3749 3 жыл бұрын

Nice work. Where can I buy that carving tool?

@jcarloshernandez3259 3 жыл бұрын

Eres un Chingon mis respectos

@engraveit5811 3 жыл бұрын

Gracias

@1crafter2another 4 жыл бұрын

Which machine are you using, Lindsey? GRS? Do you recommend stripping the chrome before engraving?

@engraveit5811 4 жыл бұрын

Andrea Hanson grs and yes strip the chrome

@wilmesllc 2 жыл бұрын

Question: how do you smooth out the etches after engraving? Do you polish it? That's the part I am curious about?

@engraveit5811 2 жыл бұрын

I always polish over my engraving to avoid any existing metal burrs. Only if engraving is deep enough etc

@hesse13 3 жыл бұрын

Great job!!! What kind of engraving knife is that? Looks very powerful.

@engraveit5811 3 жыл бұрын

Hand held air chisel

@hesse13 3 жыл бұрын

@@engraveit5811 Thank you for your response. Is it hand made or you bought it somewhere (link, please)? Thank you in advance!

@OwenPrescott 4 жыл бұрын

Are Pneumatic engravers suitable for fine detailed work? For example engraving coins?

@engraveit5811 4 жыл бұрын

Yes they are fine for that.

@ericsotelo211 4 жыл бұрын

Very good just need a nice fine point and you can get all sorts of cuts and detail in tiny spaces

@erikbartolo8436 5 жыл бұрын

What kind of graver do you used i can find the right one v graver or the o graver

@engraveit5811 5 жыл бұрын

Erik Bartolo I make my own style chisels out of GRS blanks

@erikbartolo8436 5 жыл бұрын

That amazing your work is amazing what degree do you use

@luisrodriguez7762 4 жыл бұрын

Hi my brother what is the name of the machine your using been looking for one please let me know thanks

@engraveit5811 4 жыл бұрын

luis rodriguez Pneumatic air engraver

@joseb1700 4 жыл бұрын

Is ur hand shaking on purpose or just the strain of pushing?

@engraveit5811 4 жыл бұрын

Jose B my hands always shake it’s just my movement I think.

@johnhayes6414 8 ай бұрын

Please do a demo on if you can produce by hand same methods that a rose machine can do. Not just circles

@alexlumpe4342 4 жыл бұрын

I'm thinking of starting engraving as a hobby. Could you please give me some advice, such as what tools and machines should I look for?

@engraveit5811 4 жыл бұрын

alex lumpe really depends what you really want to work on.

@alexlumpe4342 4 жыл бұрын

@@engraveit5811 I would like to work some part of my ride

@raulvargas8837 4 жыл бұрын

How much would it be for a set of big rig wheels.

@engraveit5811 4 жыл бұрын

Raul Vargas please email: sales@engraveitinc.com or call the shop for any pricing (909)947-4590

@brendamciver1320 2 жыл бұрын

Hello and thank you for sharing, my name is Bam and I need to make my engraving Stan larger can you help me

@charlesdunn7936 3 жыл бұрын

From GRS, equipment cost would be in neighborhood of $6,000 to get started.

@engraveit5811 3 жыл бұрын

Charles Dunn correct if you want a decent setup yes. Some people can get away with about $3k to start off

@iLLnATioN702 2 жыл бұрын

When it comes to your price .. do you charge per hour or per piece.. or does it depend?

@engraveit5811 2 жыл бұрын

I myself charge per piece, work area, design detail etc

@iLLnATioN702 2 жыл бұрын

@@engraveit5811 thanks for the reply . That's makes sense .. I'm starting my own journey with this..beginning level but I'm starting to understand. Every piece is different angles, levels, shapes... regardless of size .. sometimes smaller pieces have to be a little more creative.. big piece's it's all about filling space and patterns. I got the tools and I'm down to put in hours of cutting.. but I suck at drawing no patience.. I try and freehand everything it looks OK but to me deep inside it sucks lol.. that sharpie set up you have would definitely help me . Thanks for this video very useful information.. I know some don't like to show their set ups and techniques but trust me you can show every one everything.. but unless they put those hours and hours .. and hours of practice. RESPECT ✊ . Definitely an art.

@azarelthecreator7098 11 ай бұрын

@@iLLnATioN702 You will learn that the smaller you go the more time it takes because you have to work slower and with a lot more can and planning to ensure you dont mess up the piece. When it comes to stuff like this its kind of like tattooing. There are times when smaller tattoos take more work than it would if it were larger.

@bone3069 4 жыл бұрын

What’s the name of the engraver he is using ?

@engraveit5811 4 жыл бұрын

Harlow Grant grs tools

@junajuna7638 4 жыл бұрын

bisa di beli dimana ya alat nya

@liammcdonnell2504 3 жыл бұрын

What kind of handpiece is that ... I have a foredom hammer hand piece that accepts their engraving adapter ... Would that be a waste of time?

@liammcdonnell2504 3 жыл бұрын

Nm its a grs ... I was praying there was a cheaper alternative lol

@engraveit5811 3 жыл бұрын

I’ve never tried engraving with a foredom just to do back ground removal. Grs is what recommend.

@VictorOrtiz-hk8dn 5 жыл бұрын

How much for 87 regal door handles

@engraveit5811 5 жыл бұрын

Victor Ortiz vary from $180 to $300. Call the shop (909)947-4590

@iyoyz 3 жыл бұрын

Ukuran mesin n ukir nya tolong di perlihatkan

@hendrakurniawan6114 3 жыл бұрын

what tool name ?

@engraveit5811 3 жыл бұрын

Grs

@koreakim7551 4 жыл бұрын

good !!!!! how to buy tool ???

@engraveit5811 4 жыл бұрын

korea kim grs

@burn1down249 Жыл бұрын

does your finger hurt man?

@engraveit5811 Жыл бұрын

No they do not. Rule number take care of your body and your body will take care of you

@georgesaralidze5393 3 жыл бұрын

How can i contact you for classes?

@engraveit5811 3 жыл бұрын

Sales@EngraveItInc.com or call the shop (909)947-4590 Thank you, Hernán

@adamstarzmann7931 2 жыл бұрын

How do I find you on Instagram and Facebook

@engraveit5811 2 жыл бұрын

IG is @Engrave_It

@p.s8950 3 жыл бұрын

Very good instruction and video style (no heavy metal background music or standup comedy) but Damn... that's ugly.

@engraveit5811 3 жыл бұрын

Not sure how to take this but thank you for watching

@warwickandrews Жыл бұрын

I think it’s beautiful but you can’t please everyone

@coryj8374 Жыл бұрын

Why not put the design on transfer paper and then stamp it on there? Save some time and you still would have created it by hand.

@denisberezin642 Жыл бұрын

Качество отвратительное

@MASTURBIKER Жыл бұрын

I'm not that talented I'd have to take a rubbing of the design then using carbon paper trace it onto the cover ... how do you know how deep to go with the engraving or does that just come with experience?

@engraveit5811 Жыл бұрын

In my opinion come with experience.

@brendamciver1320 2 жыл бұрын

Hello and thank you for sharing, my name is Bam and I need to make my engraving Stan larger can you help me

@engraveit5811 2 жыл бұрын

Email me more information. Sales@EngraveItInc.com