I watch a lot of car repair channels (it's relaxing). Eric O. is top-tier. Evidence: 1. Superb structure to the video content (generally an intro. where he sets the problem or project up, the actual body of the work, and then a solid conclusion) 2. Superb lighting and sound, with multiple angles. 3. Places the viewer right next to him as if you were being trained by him. 4. His temperament and personality fit extremely well with video work. He not only is able to teach but is teachable. 5. His stream of consciousness type dialogue is always interesting, and at times breaks into outright hilarious. Combine this with his family interactions and he is unstoppably funny with quick wit. 6. Extremely persistent when most individuals would have melted down. 7. Pays incredible attention to detail--in diagnostics, routine brake jobs, as well as large jobs. He seems to have an inner aversion to cutting corners or doing anything that reeks of "hack" work. 8. The fellow is one hard worker.

At least Kilmer didn't pop out of the trunk when you opened it.

Hi, my name is Jackie West. I am Ford Master Certified,ASE Master Tec. Until 2014 when I got paralyzed my wife and I had our own business. I don’t see any problems with your work. Sometimes you take the long road to diagnose a problem,but not every follows the same path. Customer satisfaction and no comeback is most important. Thanks 👍

She's lucky to have a great mechanic and a great friend👍

You are an amazing man. You missed your calling, should have been a shop teacher. Your patience and understanding of electronic processes is uncanny. Having been a Cadillac tech for years, and before complicated electronics, we had more vacuum controllers,and had to chase a lot of lines like you do with wiring. I so enjoy watching your thought process as it's spot on. Also showing your family on videos makes it like stopping in at a local shop that a friend owns. Thanks so much for taking the time and sharing your knowledge.

I fell in love with Hannah when he said she was stranded and took out the fuel pump fuse and actually got the car started. Her boyfriend was probably standing behind her holding the flashlight and her purse.

Years ago I had a some mid size GM with no fuel pressure maybe a Malibu I can't remember. I replaced the fuel pump - lasted 3 months came back on a hook. I tested for power at the fuel pump grey wire, both sides of the connector. tested good. I had power so I replaced the fuel pump again warranty. (mechanics are one of the only professions your not paid when you make a mistake) This happened again (I'm a little dense). I removed the pins from the fuel pump connector near the fuel tank harness side and crimped them tighter - problem solved. Eric you have great diagnostic skills. I've worked as a diagnostic tech my whole life. "If you can do it others can too" No! many cant perform at your level. I worked for a few dealers and hate their money grubbing dishonesty. I run an honest shop and the Lord provides all my needs without dishonesty. Nothing has been more satisfying in my life to tell big dealer managers my toolbox has wheels and I was looking for a job when I found this one when I was working for the man. I enjoy your videos. You're a good teacher.

The way Hannah looks at you and smiles is priceless great job

Dude,, your charisma is outstanding, you could make a "How to watch paint dry" video entertaining.

Man, you are lucky having such a nice and smart shop asistant.

You’ve got to give Hannah credit for checking the FP relay.

There's an old saying that says I like work and I can watch people work all day long" For some reason watching Eric work relaxes me.

Soooo, Hannah was the one who actually diagnosed the problem. Way to go Hannah!!! Great job. Eric, you should have staggered those soldered joints Ha ha.

I'm a 78 year old retired geezer that doesn't work on his own cars and holds his breath every time he needs one of his vehicles repaired. I am hoping that the mechanic shares your honesty and dedication. What I do share with you is a love of shooting. I go to my range almost weekly with friends and we have a great time shooting. I keep waiting for another of your range days.

Its great to have a trustworthy mechanic a woman can trust, bravo Eric...😂

'If I could do it, You could do it!' Is sooo encouraging! Your a sensation.

Once again Dr. O has found the bad connection. A little minor surgery and all is well. Thanks for taking care of Hannah, she is truly an asset to SMA.

You do the repair and Hanna does the cleanup sounds like a win win, now that is what I call team work.

You are definitely one of the best on electrical problems. Really appreciate you.

I have an 2007 Malibu. I am glad to watch any instructional videos for that model and year. A year or so ago I had a start, no start issue. The battery & alternator were good. I thought it was the starter so I bought one and put it in. Still, same problem. I had it towed to Firestone and they wanted $1500.00 to fix it. Another you tube video helped me figure it out that it was the starter relay. I got a new relay and it has been running good ever since. Eric, I was about to say there is not relay box like that in my trunk. So I paused the video and went outside to see. Yep, it is back there. I plan to watch this video more than once. My Malibu is my daily. I need. to keep it working.

Hannah seems like a really nice young lady. Nice work.

Thanks Hannah, my Daughter did her brakes today after watching this last week! It it wasn't for you she would have never done it.

You are just plain Awesome! Your attitude, knowledge, the quality of all your videos but most importantly is how you always take into consideration all of us that don't have a fully equipped shop. Thanks for all you do and the time you take to help us all out in this "Real World" of ours. Hello from Albertville Alabama. Maybe someday I will drive up there and buy you lunch.

Years ago an old timer showed me the trick of keeping some electrical tape wrapped around a small screw or bolt in order to work in a tight spot like you did. I like to keep a few loaded bolts in the tool box for this reason. Keep 'em coming Eric - you're running a clean show! 👍

Don't listen to the folks who have their panties in a wad. The truth is, for every 1 person who has a negative comment, there are 9 people who are perfectly happy with the job you do (mechanic and video editor) but just don't say anything because they are too busy enjoying the content and keeping an eye out for current issues. LOL. Keep up the good work.

Eric"O", good looking out taking care of Hannah's car troubles, she is lucky to have you as a friend and boss. Good luck to you Miss Hannah on your future schooling. God bless.

Man, you are a REALLY good and honest mechanic!!! Wish there were more like u. Dealerships included!!! I just subscribed!!!!!

And another awesome video! Thank you for taking us along. You are hands down my FAVORITE mechanic!

That's a good fix on Hannah's car she don't need to be broke down on side of the road these days and times.

As a general rule,I always keep the old parts and show the customer what went wrong. Even if they dont ask for them back,I still save them to show them what was wrong. You are right,most people dont want the old parts or ask for them back. At that point, whatever it is that is yours to do what you want. I sometimes save certain things,depending if its got other usable parts on it. I sometime can pass that on to the next guy if it happends to be a part if I can use a used part. Swapping parts that are not specific to the right model can always lead to more headaches than when you started. Especial when the sales counter dude tells you" Yeah,it will work on that model" And it freekin dont,reguardless of what you try. Then you want to take it back and beat him with it till he cant walk right but by now its so hacked up you cant take it back,so you end up getting OEM when you ahould have in the first place but thought you might save a few bucks( yeah right!). Anyways. Its always best to ask if a customer wants the old parts unless its obvious they wont.

Really enjoy this channel. Thanks for not just being a parts changer. Inspired me to start testing and diagnosing. Tested a clutch safety lockout, ignition switch etc. Turned out to be a hot soak on my starter 88 Sierra 350 sb. Saved a bunch not just throwing parts at her.

Great patience and determination to find the bad connectors. Hannah is as fabulous apprentice and would be a great addition to your videos, i enjoy the fun talk between you both.

I had a similar issue. A guy called me to come look at his jag xjr. He had left it sitting for 3 months and all of a sudden it would crank and start but not run unless you gave it the beans on the gas pedal. It had spark, maf was good, and throttle body was good and so was egr. It had momentary fuel pressure at initial prime then pressure would drop. To make a long story short, the vehicle has an primary and secondary pump. At initial prime both are supposed to fire up, then the primary takes over but in this case only the secondary was working. He was told he needed 2 new pumps which would cost 3000 dollars. I checked the relay and sure enough there was no control side signal to the primary pump. Jumped the load side and boom heard it prime and car ran!!! Ended up a mouse ate through the signal wire. Weird part is it had no codes!!!! Saved this guy a boatload of cash.

Glad to see you helping her out. She seems like a real good person and very helpful.👍🏼

You've saved me so much fing money. You rock. My 3.8l GP now runs like a champ. Turns out I had intermittent issues with the icm and the crank sensor simultaneously. Never would have bothered even looking into it if it was not for your videos. Now I just watch your videos for the fun of it since you fixed all my issues..

Great to finally see the repair done correctly I give you an A+ expertly done

Trick a good friend of mine taught me is to use a socket on a cordless and run the amount of tape you want on it. The socket turns into your roll of tape. Hope it helps. As always, great videos. Thank you

Eric O for boss of the year. I have watched every video you have put out and every repair you have made looks very professional. You should see the crap the shops do around here, which is why I am a DIY'er. The only thing I bring my cars in for is tires and alignments. After the last alignment I had done, my steering wheel was pointing at 2:00. I ended up redoing it myself with a string. Please don't let a few negative comments get you down. Most of us appreciate your hard work. Also thought your jokes were funny.

Just stumbled on to your channel! Most don’t have a boss like you so so Hannah is lucky. Thank you for the service you are providing here. Won’t bore you with accolades as I’m sure you are probably bored with them by now. Your content is informative and entertaining. Keep it up I’m sure you will cover something I need.

Well, it has been 19 yrs since I was a certified mechanic and I miss it. Your videos make me want to go back. (can’t afford to go back). I then spent the next 13.5 yrs working on 50 yr old industrial gas compression equipment. I miss this too. For the last 6 yrs I am supporting the entire company in staying in compliance with regulating agencies. Thanks for your content. It’s good to see a professional at work. Admitting mistakes when and if they happen. Good diagnostic skills and solid Enginuity. Keep it up. Other than my own and family vehicles, I get my fix right here!

Stripper references was hilarious! They don't come home with glitter on them!

Not for a good reason, but glad to see Hanna star in her own video before she leaves, she'll be missed

Great job! I know Miss Hannah appreciated it. Who gives a rip what other people think about your work…you’re a top notch mechanic/technician combo.

At 22:18 he says "the best thing about these strippers is they don't cost you a dollar & you don't come home with glitter on you". Hanna..............................crickets. Classic!

To make taping easier, I always wrap a couple of feet of tape around a deep well 1/4 inch socket. It is much easier to spin the socket around the bundle than a large roll of tape.

I subbed after watching my 2nd vid, the 1st was the tow ride to pick up the dairy farm truck. I have been binge watching since then to catch up! This one was (as Tony the Tiger says ) GRRrrrrrrrreat! Absolutely loved the 2 where your wife changed her tires and fixed the wiper motor. So far your day in the shop was my favorite. Love watching you and your beautiful family at the shop. Take care and thanks for the enjoyment you give to all who watch. Forget the troll that clicks thumbs down on all the vids.....Scotty, you know who you are, so do we!

Again, I am commenting from a professional view having spent over 50 years as a mechanic. This man is good, actually great. My question is who are these total idiots who have down voted him? Not one of them could have even known where to start fixing this car. This reminds me of what a friend used to say "Creeps are a dime a dozen".

Lucky to have Hanna to help even with her own car!!! I remembering the other times she was in the background handing you the tools!!! I think she is glad she did now cause your helping her out now!!!

It’s amazing to watch you work. I am surprised though that with all the mechanical problems that you work through, not one swear word is uttered. I watch a lot of other videos of lesser quality, and talent and the mechanics swear like sailors. Thanks for keeping it clean!

I was "shocked" at the "current pun " it was reVOLTing... love watching you troubleshoot. Keep it up and thanks!

how can anyone not like your videos. you and Mrs. O remind me our mechanic and his wife (JB and Jessica). He is thorough and wants the job done right the first time. Mrs. H takes care of the front, taking calls, money and making appointments, AND Making Sure the Customer is Satisfied with Their Vehicle. Even tho this is an older video, i still enjoy watching and learning! Thank You Sir

Love watching these videos. I watch them when I am warming up on my trumpet. I have the sound on a low volume and I turn on the closed captioning. There is nothing funnier than reading the words that CC claims you are saying while playing long tones. Thanks for making the videos!!!

She's Beautiful ♡

Eric, I watched the whole fix as I find it more interesting than TV shows. Showing the complete fix gives a clear understanding of just how involved a job is before I have to consider the time doing that job myself.

no wonder some mechanics do not like diagnosing electrical faults. great job

You're one of the few people that could endorse a product and I would listen. I respect your opinions.

This was such a great video for so many reasons. Not only did Eric O. do a top quality repair as always but this time he got to do it for Hannah who works at the shop with him. Call me weird but it made me feel so good to see him helping out someone that is close to him and she'll know the repair was done right when she is away at college! Also i think it's worth mentioning that i really like how Eric O. addresses concerns in previous videos that viewers may have about his procedure. He doen't bad mouth them but rather gives them the reasons for his decisions. I read the comments and i can understand how people were were concerned about giving the customer the choice to get his old fuse box returned in the last Buick video. But would you expect Eric O. To not do the right thing??? As he stated he gave the customer the old fuse box, he looked at it, and then threw it away. So no harm no foul for him to take the fuses and relays for himself after the customer showed that he no longer wanted the item. I know ALL KZfaq channels get some negative feedback but the SMA channel offers the highest quality repairs and greatest respect for its customers. I always spread positive feedback about this channel because the truth of the matter is, there is NONE better. This video is a prime example showcasing Hannah needing help with her own personal vehicle. It makes me proud to see Eric O. stepping up(which i knew he would) and helping others without the thought of financial gain. He wanted to make sure her car was fixed right so she wouldn't have any further issues with that fuse box. I'm proud to be a part of this channel and all that it stands for. Great job Eric O.

Keep up the great work!!!! Videos I mean..... It's great to see good-natured people having fun with each other while they're getting the job done right!!!

Been watching many of your diagnostic and repair videos without ever commenting but I have to. I have few words for you sir: Do what you do as usual and don't bother with picky comments even if they were correct. No one is perfect but you are close to perfection. Taking the viewer in your stream of thoughts is very great tool you use. Thank you for taking the time to educated us. Glad the beautiful young Hanna got her hotrod back. Thanks again.

This is only the second video of yours I've watched. You and Hannah work well enough together I can't tell if she's family, employee, or both. And that's honestly great.

Typical GM wiring harnesses. At least Hannah took it to the best shop in the United States to get it properly fixed.. oh yea what's it called, South Main Auto...lol. Great video as usual Eric. Have a great and safe weekend...👍🤘

"Taping it up like it's gonna run" There's no pt2. I knew it would run too! 😁💪💪👍👍👍

Another great repair! Love the extra steps you take to show us the repair.

I've watched a lot of your videos, and I don't know why I just thought about this now.... You have twice the knowledge in your head of most mechanics. I have never met a mechanic or auto electrician here in Australia that can do both... It's either take it to a mechanic, or take it to an auto electrician..... But no matter what the issue is, either mechanical or electrical, you have an understanding on to where to find a solution. I guess in the US, this is why you guys call yourselves "technicians", rather than just mechanical or electrical. Even in the heavy vehicle business here (and in a major city too), we do not have any one workshop that deals with both electrical, and mechanical within one shop (except dealer services of course). You are somewhat of a mastermind. Good on you for building yourself to that level.

Loved the video. Instantly hooked and subscribed. My 06 Malibu Maxx SS is doing the same thing. I'll be checking for burnt wires on the fuse box next. Thanks.

Good job, excellent diagnostics, and nice to see today's youth willing to learn ... and not protesting !!! As you get older, Hannah, you will look back and realize that you were taught that you can do anything - - just put your mind to it !!!!! Eric is a fine teacher - he doesn't yell at anyone !!!

Eric, I have 30 years of electronics technician & some 20 years in fixing cars, and still you teach me something every time I watch your videos, if not at least a good lol .sincerely Thanks..

I'm a below-average DYIer with desires to do more despite my lack of formal training and a small toolbox. I draw great comfort watching you struggle with certain tasks, just as I do. Thanks for the encouragement!

The thing about having a mechanic as a dad is he'll never just buy you a new car lol

Good job Hannah ! I see you had to coach the boss the entire time. I did get the current joke. Lol. That one in a row. Loved the video and dialogue!

Electrical Gremlins require a man of patience and persistence something I don't have, great diagnosis and repair for your daughter, Hanna you have such a great Dad.

Hannah is Rock Star! I Love your videos with her. She is so eager to help and learn. Great Videos!

I like your play on words "Current issues"

Good Video And Professional Fix As Always, bet Hannah is happy now, nix worse than not being able to trust ones car to go from A to B and back.

Lovely seeing Hannah again. She has such a lovely, attractive smile. As for that fuse-box, I would add it to a whole rack of strange bits in my workshop, for that unknown rainy day.

This Channel has to be the best Automotive Repair Channel out there

Hanna, good on you for even knowing what a fuel pump relay is or located. You already have the knowledge that 1/2 of men don't have a clue.

lovve watching this Auto Tech, funny , definitely loves what he does as i do, therefore enjoy listening and watching you Mike keep on keeping on!!!

Excellent repair, even better diagnostic skills. Respect!

Eric, loved video, liked the way you diagnose the problem and learned so much from you. You have great sense of humor!!

New subscriber. I am humbled by your talent/art/humor! Thx

Well, I've been watching you off and on for awhile now and determined you're not a fly-by-night, back yard vehicle mechanic. So, I subscribed with bell on. So far you've fixed 3 of issues with my 2007 siverado and you've got my vote for best on-line experience to follow. Please, keep your channel going. Also, the commentary/sarcasm is awesome. Thanks from Waco, TX.

I really love the work you do, i believe that you are a smart mechanic you know exactly what you are doing, we really need more good mechanic like you , keep up the good work grate job

I enjoyed the diagnostic journey completely. You started with some excellent info to start. I have heard people ask, "Why do you ask all the questions?" My favorite is when the husband drops off the wife's car and has no idea when, what, where, or temp. I have called the driver to probe for additional info. As a retired ASE Master tech who started in the 70's, you left little to be desired for the hard work good techs face every day. With the cavities melted some in the connector segment, just changing the terminal would not last. If I go to the bone yard, I make a point of taking side cutters to grab extra terminals and perhaps a popular connector. Folks who don't work on vehicles just believe the tools & box belong to the company or dealer. They don't. Soldering is "Best Practice" and shrink tubing to me is so important that I have a 3M roll of 3/16" on a 50-foot reel. You are right about some who throw a fit when they see smoke and you are not inside a "Hazmat Suit" being feed external HEPA filtered air, when it's just the rosin in electrical solder melting, not lead. Of course, a cigar, burning leaves or a Colorado high is ok! For a tech tip, a dap or black weatherstrip adhesive holds the cut end of electrical tape when wrapping but it's not seen here. I am a firm believer in dielectric grease and have 6 tubes of the $5 stuff everywhere. Few would use a lab scope and fused jumper wire to test a running fuel pumps wave form. As you pointed out, folks need to know, this allows you to see the electrical activity in the component and tells you about its health in waveform as the brushes slide from commutator plate to the next and the amps. I have seen hundreds ask in comments what the amperage should be? Well, test a lot of them and you will develop a sense for the correct reading. Too high, filter plugged, too low, the pumps worn, and the pattern will not be smooth. People ask to check the vehicle for trips, look at the brakes and stuff. Dude, you use the brakes 3 times more driving to work each week than an 800-mile trip to grandma's house...scope the fuel pump! Great job Eric.

Hannah says "keep the POCKET screwdriver in your POCKET" Priceless!

You are a good boss and a gifted tech!

Watching you solder and heat shrink is very satisfying.

You are definitely an expert troubleshooter. Good Job.

Very smart girl how many girls Would of even thought to tap on the gas tank she even Knew where the really was She has Learned a lot from you she has been pain attention My hat is off to her 🙂🙂😎

Thank u for being the first dad teaching your daughters how to work on cars, I think that's wonderfull, never send know other mechanics do that before.

Coming from a guy that started a mechanical career in 78 and specialized in electrical and drivability you do nice work.

Amazed at this fellows knowledge at diagnosing, clear camera shots and excellent narrating...I agree make a video on how grass grows, id probably watch it.. probably not, but I've made my point..also kudo to you Hannah for pulling the nob, I mean the fuse..

Eric O. I have only 1 complaint. You and your family should be on ABC, CBS, NBC, or Fox. I can watch, learn, and really enjoy myself way better than any show on cable or TV. You should be paid 2-3 times better than any of the actors on TV. Totally entertaining! Thank you!

What an awesome boss. Another great vidja Eric. Keep up thd gòod work. Cheers!

Hi Eric. I like your channel. In my younger days i was a car mechanic and then trucks and highway coaches. I can certainly relate to the tape roll problem. When you work under a dash board it aint easy as well. An old mechanic at the time showed me his trick and been using it ever since. Roll a couple of feet of tape around an AG fuse. It makes the most convenient roll of tape ever. Hope this trick helps. Continue the great work.

Automotive electronics are boring and confusing and I can't believe myself actually watched this whole video with all the what not and what have you. Thank you Hannah for getting a good start on the diagnosis. If I was there when you were stranded I would have held the flashlight for you. Good job Eric and Hannah.

As always educating and entertaining rolled into one video. Keep up the great videos.

She picked a nice color 👍 Nice job now no excuses for being late to work 😂😂

Top Notch Eric, as usual, you truly investigate and more so understand every step of your thought process, many kudos to you Sir.

Wonder if this problem required Hanna to go walkin in her maliboots? This fix was above and beyond what even a dealer would likely have done, GREAT WORK!