Harbor Freight Pressure Pot for Resin Casting, Questions Answered!

Рет қаралды 19,823

3 жыл бұрын

I did a video on how to convert a Harbor Freight pressure pot for resin casting about 2 years ago. There have been lots of questions on that video that I have answered a few times. So I decided to make another Harbor Freight pressure pot Video answering all of those questions. Resin casting is lots of fun and I hope to take the intimidation out of making your first cast.
Here's The Original Video. • Converting a Harbor Fr...
Here's The Big Pressure Pot Video : • How to convert ANY Pai...
Tcp Global 2.5 Gallon Pot: www.amazon.com/gp/product/B00...
California Air tools 5 Gallon Pot: www.amazon.com/gp/product/B01...
New Seal for the Harbor Freight Lid www.amazon.com/gp/product/B00...
AFFILIATES... Enjoy discounts from the companies that support our channel!
ALUMILITE... Jake10
Jake10 at Checkout: www.p3hfsftrk.com/JAKE10/
MAS Epoxies .. JakeT10
JakeT10 at Checkout: www.p3hfsftrk.com/JakeT10/
EYE CANDY PIGMENTS... Jake15
Jake15 at Checkout: eyecandypigments.com/Northsid...
EPIDEMIC SOUND... Copyright Free Music.
Click here for Copyright Free Music: www.epidemicsound.com/referra...
Please Support My Channel
Patreon Support : / jakethompson
Woodworking Plans: jayscustomcreations.com/produ...
Northside Shirts : teespring.com/stores/northsid...
Follow Me on Instagram : / jake_thompson670

Пікірлер: 279

@stevebak6664 2 жыл бұрын

Say Jake. First off, thanks for your first video on how to covert Harbor Freight tanks. You detailed the process so well that I had no issue accomplishing it. Secondly, out of the gates my tank leaks air like a sieve, and as your noted, it leaks around the lid.. I appreciate your solution to the problem, but I have a better way to attack it. I removed the ridiculous gasket that comes with the tank, then I mixed a batch of silicone rubber and poured it into the channel where the gasket once sat. It works like a charm, without extra clamps like you had to do. I am able to hold air up to 60 lbs. I just give the clamps a good twist with a wrench and it’s good to go. The silicone that I used is Smooth On brand. Thanks again.

@JakeThompson 2 жыл бұрын

I ended up just buying a better gasket from Amazon but your solution sounds awesome

@stevebak6664 2 жыл бұрын

If anyone tries pouring a new gasket like I did, I have one tip. You might want to run a bead of calk around the channel wall that is welded in place. That metal lip is poorly welded and silicone leaks under it. It didnt leak a ton but it was a little annoying.

@wlh5926 3 жыл бұрын

thanks for taking the time to explain how to use this in detail! :) it's incredibly helpful for first time users!

@JakeThompson 3 жыл бұрын

Very welcome.. I’m glad I can help. 👍👍

@shaunfelton2046 3 жыл бұрын

I’m always learning because you’re always teaching! Thank you, Jake.

@JakeThompson 3 жыл бұрын

Thank you Shaun!! That’s what it’s all about!! 👍👍

@lauramuraro637 Жыл бұрын

Thanks. I am a beginner on all turning, but have discovered I am pretty good and what a great way to meditate! I am getting my first pressure pot and was intimidated. Your video released lots of the anxiety I had.

@JakeThompson Жыл бұрын

Turning is very relaxing.. I’m glad I found it too!! These harbor freight pots are good to start with but if you have a few extra bucks to spare, there are some already ready to go amzn.to/3SvCidR

@TurningsbyTurner 3 жыл бұрын

I took the plunge a while back and set up my HF pot. Still need to do some casting. I tested mine and it went from 51 to 47 in a 12hr period. I’m sure if I use it a lot, I won’t be so lucky. Lol. Your pressure pot video will always be gold in the KZfaq videos! 👍

@JakeThompson 3 жыл бұрын

Awesome!! I only have to leave it over night when I use liquid diamonds. But I leave it hooked up to air.. I appreciate you Sir!!👍👍👊

@SteveC38 3 жыл бұрын

I think you always do a really great job explaining things as you go and I appreciate it Brother👍

@JakeThompson 3 жыл бұрын

Thank you Steve.. I appreciate your consistent support!!👍👍👊

@JakeThompson 3 жыл бұрын

Thank you for watching the video, if you enjoyed it, or learned something, please hit the like button!👍👍👍 Here is a link to the new seal for this pot. It works great. www.amazon.com/gp/product/B00KHY3U9W/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=jakethom-20&creative=9325&linkCode=as2&creativeASIN=B00KHY3U9W&linkId=8c12b24732aad3928f57bcbbffd8320a

@nickkumba5454 2 жыл бұрын

You have helped me more than you know. Couldn’t figure out the relief valve for the life of me!

@JakeThompson 2 жыл бұрын

Awesome!! Glad I could help ya out!! 👍👍

@charlesregensburg8366 3 жыл бұрын

Great video!!!! I've been in commercial construction for years. Retired at 48 - project manager/eng. I think I'm 53 now??? And want to start all kind of things. One is with expoxy pours.... I'll keep watching you and try to learn !!!

@JakeThompson 3 жыл бұрын

Awesome!! You got this.. it’s lots of fun.

@protect.your.digits.creations 3 жыл бұрын

Great video Jake . I remember the instruction video of the Harbor Freight pressure pot , then the better 5 gallon. Stay well to your family and you my friend

@JakeThompson 3 жыл бұрын

Thank you for watching Gregg.. I appreciate it. 👍👍

@BradsWorkbench 3 жыл бұрын

Great video bud. I even remember asking how to adjust the pop off. I was doin it right but that thing just wouldn't budge lol. I just bought a new one. Only a few bucks anyhow. This channel along with ur friends definitely got me started down the road of resin. Thank you!

@JakeThompson 3 жыл бұрын

Lol.. I got tons of questions on that pop off valve.. I would have made a video just for that!! I’m glad I could help get you into resin casting.. That’s what it’s all about!! 👍👍

@omarrivero818 3 жыл бұрын

That real honest video. Thank you so much

@JakeThompson 3 жыл бұрын

Thank you Omar!👍

@tompuskar4426 3 жыл бұрын

I used rubber shelf liner from Harbor Freight to make a "gasket" for the top. added additional cushion to fix leaks--and cheap!

@JakeThompson 3 жыл бұрын

Super cool!! 👍👍

@mpace58 3 жыл бұрын

Haven't yet gotten into casting, but know that I will want to in the near future. Thanks for videos on setting up the HF pressure pot.

@JakeThompson 3 жыл бұрын

Mark Pace you will have lots of fun.. Thanks for watching Mark!

@armadilloforge 3 жыл бұрын

Got the Harbor Freight one A few months back. Never did get it to seal well. Sent that little hummer back and got A 5 gallon one like your 10 gallon pot. Super happy with the bigger pot, holds like a champ!

@JakeThompson 3 жыл бұрын

Lol awesome!!! They are pretty nice to have!!👍👍😂

@johnwallace4408 3 жыл бұрын

Gr8 video Jake, you have given some ideas how to solve the leaks in my pot! TKS

@JakeThompson 3 жыл бұрын

John Wallace Awesome John!! Glad I could help!👍

@robkerf 3 жыл бұрын

I had such an issue with mine after 2 days, i returned it, and got another as a replacement. the toughest part is evenly tightening the lamps on the pot, seemed to make a huge difference in holding pressure consistently. so i do like if you were tightening lug nuts on a wheel....1/2 turn one side, 1/2 turn opposing side and so on. I had more of an issue with the gunk near the relief valve, had to gob some teflon tape there. Thanks for posting Jake, i really thought i was the only one having an issue holding pressure and the leak issues!

@JakeThompson 3 жыл бұрын

Rob Kerfoot Thank you for watching Rob.. I figured people would think mine just works perfectly all the time.. I also figured if I was having issues then so were others..

@ConnieConnie824 3 жыл бұрын

👋 Great update to the original video. I used your first video on this to build my Harbor Frieght Pressure Tank. Been using it for almost a year now and still works great. I actually got it to a point where it hasn't leaked in over 6 months. I've been casting so much lately, I am considering getting a second one.

@JakeThompson 3 жыл бұрын

Awesome Connie!! The very next cast didn’t leak at all.. lol that’s how it goes. Your castings are amazing!!

@ConnieConnie824 3 жыл бұрын

@@JakeThompson Thank you 😊

@daveb.misc.2589 3 жыл бұрын

Good video jake....very informative! Im still unsure if i want to do resin. (Ive got so much wood to turn, i dont know when id have time!) But, i might in the future! I still learn something new every time i watch one of your videos!

@JakeThompson 3 жыл бұрын

Awesome Dave!! Keep turning that wood... that’s super fun too... 👍👍👊

@jarhead3002 3 жыл бұрын

Thank you for another great video just starting to cast just got my Harbor Fright pot today nice timing great minds think alike Semper Fi Jarhead

@JakeThompson 3 жыл бұрын

Thank you Jody HooRah 💪💪

@CrossCutCreations 3 жыл бұрын

Good work, Jake. The HF pot is a solid starter unit. It's a great economical way to get into the game.

@JakeThompson 3 жыл бұрын

Absolutely Robert.. we both know that’s right.. lol 👍👍👊

@radiationroom 2 жыл бұрын

Thanks! This is useful info.

@JakeThompson 2 жыл бұрын

Very welcome. 👍👍

@michaelthomas3616 3 жыл бұрын

Hey. Michael. Can't wait to try this.

@JakeThompson 3 жыл бұрын

Hello Michael! Thanks for watching!!👍👍

@NoComplyDistribution Жыл бұрын

I have an older Craftsman paint pot I got at a rummage sale for 2 bucks I converted. It gave me some leaking issues and I thought about the way to put a wheel/tire on a vehicle. You alternate the tightening pattern. Previously I would just randomly tighten the wingnuts in any order. As I began to alternate tightening the wingnuts angled, like putting on a wheel, it became easier to get the lid tighter and eliminate leaks.

@JakeThompson Жыл бұрын

👍👍

@kelleysanders282 3 жыл бұрын

Good job Jake!

@JakeThompson 3 жыл бұрын

Thank you Kelley!! I’m glad you enjoyed it!👍

@thomasstaggs6649 3 жыл бұрын

Enjoy your video's , After some thinking I found that all you need for fittings is a the reducer one T, safety valve direct fit also with no regulator works , still working on the leaks

@JakeThompson 3 жыл бұрын

Very true.. I leave the regulator on because of the leaks.. I just leave the air on and it stays at the right pressure. I’m glad you enjoy the videos. 👍👊

@thomasstaggs6649 3 жыл бұрын

Used and old trick on my harbor freight pot , took a small pump sprayer added some soap , squirted it all around and found a leak where the safety valve is welded in , you wouldn't think it would leak , I put some JB weld on it and so far it is holding pressure , thanks for the reply appreciate it

@DeadriseWoodCrafts 3 жыл бұрын

Such a great video!

@JakeThompson 3 жыл бұрын

Thank you Brother!! 👍👍👊

@eddiehall5644 3 жыл бұрын

Thanks for the info Jake

@JakeThompson 3 жыл бұрын

Very welcome Eddie!! Thank you for watching!!👍👍

@texanasimmons1761 3 жыл бұрын

Hi, Im not a turner or caster, I just like this stuff. This was a very informative video and if I was to do casting, your tool videos would be a great help. Thank you.

@JakeThompson 3 жыл бұрын

Texana Simmons That is a huge compliment.. nothing wrong with just liking something. I like lots of stuff I just watch.. 😄😄

@minervamatues3246 3 жыл бұрын

Thank you! I'll have to buy another valve since I ate through mine trying to turn it which seemed impossible.

@JakeThompson 3 жыл бұрын

Very welcome!! 😀👍

@ChillyJack 3 жыл бұрын

Petroleum jelly softens dry rubber gaskets so they can form a better seal. We use it on refrigerator gaskets where I work. It does eventually wear the gasket away little by little though, so I wouldn't use it on gaskets that aren't already old and dry or you'll probably have to replace them sooner.

@JakeThompson 3 жыл бұрын

Thank you for watching.. I appreciate it!👍👍

@spawn00x 3 жыл бұрын

Great video great info

@JakeThompson 3 жыл бұрын

👍👍👍

@JakeThompson 3 жыл бұрын

👍👍👍

@MuffinMan0521 3 жыл бұрын

So I noticed that it's very important to tighten the clamps down simultaneously. Opposing sides a little bit at a time, then use the wrench a bit. If it leaks around 50 psi identify where and try to tighten the clamp down by hand or with the wrench a bit.

@JakeThompson 3 жыл бұрын

MuffinMan0521 👍👍👍

@FigmentsMade 3 жыл бұрын

Thanks for all the answers! I'm Sharon and so far I've only experimented with resin. I hope to do more soon!

@JakeThompson 3 жыл бұрын

Thank you for watching Sharon!! I just started following you on Instagram.. cool stuff!!

@FigmentsMade 3 жыл бұрын

@@JakeThompson Thank you so much! I appreciate it!!

@JakeThompson 3 жыл бұрын

Figments Made 👍👍

@PHIL_S 3 жыл бұрын

I just bought some HF pressure pot handles from Kim Tipton - these are printed to fit the HF pot

@JakeThompson 3 жыл бұрын

Awesome..you will have some fun now..

@markdrexler382 3 жыл бұрын

Very good video , I learned a lot from it. Thank you. I’m new to this and the video helped immensely. Question, if I use a silicone mold and pour my epoxy resin into my mold and put the mold in the pressure pot , will the air pressure distort my silicone mold at all ?

@JakeThompson 3 жыл бұрын

If your silicone mold has air in it and you put it in a pressure pot, it will deform.. depending on how much air is in it, will determine how much deformation

@OregonDARRYL 2 жыл бұрын

Sand the top of the pot smooth. Silicone glue the gasket into the lid, so it has to seal on only one side, and always put the lid on in exactly the same spot. Mark it and match it. Lubricate the the threads on the clamps, and where the clamps dig into the lid to make tightening them easier. Seal your joints well... and stay under 50 PSI. At least ... this is what I'm doing. Thanks for all your advice!

@JakeThompson 2 жыл бұрын

👍👍

@bryangoboom 2 жыл бұрын

Sooooo my HF pot is creaking on initial testing plus the gasket leak. Is that normal for a "break in" period

@OregonDARRYL 2 жыл бұрын

@@bryangoboom Did you glue the gasket in the lid? Are you tightening the screws two at a time opposing corners back and forth until nice and tight? What pressure?

@bryangoboom 2 жыл бұрын

@Darryl Edington glued it in last night and yea I was doing that. I took a wrench and was able to get it to seal better. Waiting for the silicon seal to cure then will test again tomorrow

@bryangoboom 2 жыл бұрын

@Darryl Edington so it looks like everything is working well. Now there is a slow leak that might be a pain to fix, 5 psi like every 30 minutes or so

@kellygreco483 Жыл бұрын

there should be a gasket around the top channel this helps with sealing when you tighten the the lid down. I have a binks for spraying contact cement and you can also get liners. Baer supply

@JakeThompson Жыл бұрын

After this video, I replaced the gasket with an upgraded one from Amazon. I think I put a link in the description or the pinned comment

@WoodcraftSupply 3 жыл бұрын

Why not get some rubber gasket material or Flex Seal to put in the lid groove?

@JakeThompson 3 жыл бұрын

Sounds like a great idea, I have also thought about making a silicone gasket myself. 👍👍

@Farroutman1 3 жыл бұрын

Great info. Now I’m just going to buy a pressure pot that is already made for resin. Seems like there is a lot less stress involved.

@JakeThompson 3 жыл бұрын

Here’s the one already set up that I have. kzfaq.info/get/bejne/iZykqbOktautgWQ.html

@robvail3894 3 жыл бұрын

Another informative video. Question...I'm going to start with making pen blanks. What are the best molds to buy if I only want to do three or four at a time and use in the HF pot? Thanks again for all the great advice.

@JakeThompson 3 жыл бұрын

I just bought a silicone pen mold from P-Town Subbie... it fits right in the pot. Or you can make your own from HDPE plastic.

@sarini6626 3 жыл бұрын

Do you need the elbow fitting? Also could you please make a video about which air compressor and hose to get? Thank you so much for the great content!!

@JakeThompson 3 жыл бұрын

People have done this many ways.. with and without a regulator.. and such.. if you see a way to do it without the elbow.. go for it. You don’t need a big compressor to fill this pot.. a small compressor will do just fine.

@chadvoller 3 жыл бұрын

Anyone who buys one, make sure to check if you get one that has NPT and compression style fittings. Mine did, don't put an NPT where there was a compression fitting. I shouldn't have to say that but there's some tutorials on KZfaq for this tank that you will end up doing that if you follow them, theirs might have had all NPT, or they just didn't know better. Pull the gasket out of the lid, and check for weld splatter. I had huge ones that had to be knocked out, that's where my initial leaks came from. Also, the lid is thin. Over tightening the clamps will actually warp the lid, and possibly make it harder to get a seal next time. 4 star pattern, 1/4 turn at a time, hand tighten should be all you need to get a seal if you have smooth surfaces and a good gasket. In 24 hours, my tank will go from 60 to 55PSI. Which is mostly from my safety valve according to a bubble test with soapy water.

@JakeThompson 3 жыл бұрын

Chad Voller good stuff!!

@deadwoodcastingturning 3 жыл бұрын

hey Jake, very informative i just recently got my pressure pot i haven't set it up yet, but I do have one of Doug's stickers on it, lol

@JakeThompson 3 жыл бұрын

That’s a good sticker to have on it.. yours will probably never leak!😄😄

@deadwoodcastingturning 3 жыл бұрын

@@JakeThompson hopefully it wont but if it does, now i know how to fix it.

@taylorwatson5791 3 жыл бұрын

Does anyone know if this would work for cement in molds??

@randallappleton4193 3 жыл бұрын

I use vise grips in between hold downs

@JakeThompson 3 жыл бұрын

That works too

@JOE_GOMEZ777 3 жыл бұрын

I JUST TOOK SOME BOLTS AND EVERY TIME I TIGHTEN THEM I SIMPLY USE MY IMPACT DRIVER AND IT NEVER LEAKS BEEN DOING HER FOR 3 YEARS THAT WAY NOW AND SHE DONT LEAK 🤣

@JakeThompson 3 жыл бұрын

👍👍

@shalenaross5779 Жыл бұрын

did you need to get a quick connect hose adapter for the threaded fittings on this pressure pot? Guess I'm headed back to the hardware store.

@JakeThompson Жыл бұрын

Here’s the first video and the parts I had to buy.. kzfaq.info/get/bejne/a9B_p9eYsbfaoHU.html I did have to buy the air hose fittings.

@jptazzairbrushingjprice7250 3 жыл бұрын

Good video very informative. Just getting started in resign could use all the info I can get. I follow Kim and Pohl Barn, I will follow you know.

@JakeThompson 3 жыл бұрын

Awesome!!! You will be there in no time 👍👍

@markbolick4178 3 жыл бұрын

Can you use the same pressure pot to put a vacuum pump on to use to stabilize wood? I would think so but I'm new to this

@JakeThompson 3 жыл бұрын

It will work, but you wouldn’t be able to see in the pot when you are using vacuum..

@shalenaross5779 Жыл бұрын

I've had my HF tank in box for over 3 years because I'm too nervous to use it, but I'm genuinely tired of not leveling up my resin quality. These tiny bubbles upset me. Thank you for another video. I did watch the first one you made but still wasnt comfortable.

@JakeThompson Жыл бұрын

You got this…!

@UrbanAnubis 3 жыл бұрын

also, do the molds that you use in one of these have to be degassed molds? thanks

@JakeThompson 3 жыл бұрын

It’s always better to degas silicone.. but for penblanks it’s not as big of deal because I make them oversized and cut them down

@Kultixt 3 жыл бұрын

Would the Mold Star Slow 15 silicone work well in a pressure pot or do you have any recommendation for a suitable mold making silicone/rubber? Since I’ve heard you’re not supposed to put a soft silicone in a pressure pot. Thank you! I just made this pressure pot and it works great! :)

@JakeThompson 3 жыл бұрын

You can use whatever kind of silicone you want in a pressure pot, as long as you degas it first with a vacuum chamber. I have used fast setting silicone that doesn’t need degassed and it works fine in the pressure pot.

@bartgiles1068 3 жыл бұрын

Thanks for sharing Jake I thought vacuum would be simpler didn’t consider the time factor glad I didn’t waist my money on a v pump 👍

@JakeThompson 3 жыл бұрын

Bart Giles Thank you for watching, I’m glad I could help ya out!! 👍👍

@DKarkarov 3 жыл бұрын

Vacuum pumps are great for two scenarios. 1: It isn't a burning inferno where you are, 2: long pot life silicon/resin. Degassing and pressure potting will return results that are just about perfect every time and removes almost all risk. Reason I mention weather is potlife goes down in heat, and the vacuum can create some serious heat especially if it is already hot to begin with.

@JakeThompson 3 жыл бұрын

Karkarov 👍👍

@gregjohnson8486 Жыл бұрын

I've been tempted to do this but am concerned about it leaking. Almost all videos I've seen that convert a Harbor Freight paint pressure pot to a resin casting pressure pot say that it WILL leak. It seems in your demo the leak was primarily the lid. Can a better gasket be added to fix that problem? Can a bead of 100% silicone around the lid create a better seal? I can clamp it to my bench like you did but would like to have it so it just doesn't leak at all and is mobile. Thanks for sharing your video! 👍🏾

@JakeThompson Жыл бұрын

Thank you Greg.. After this video I bought a better seal for the lid. It’s linked in the first comment.. as far as leaking .. if you fill it to 55 and overnight it’s at 50.. I wouldn’t consider that a big deal.. as long as it stays over 45 psi until the resin becomes solidified. The new seal was a night and day difference from the original.. it was way better.

@sonyhk3824 3 жыл бұрын

Great. 👍

@JakeThompson 3 жыл бұрын

Thanks Buddy!!👍👍

@debbeneman9792 3 жыл бұрын

I'm new to resin & do have problems with air bubbles even though I torch or heat gun. Sometimes I want to cast & sometimes I just need to coat a painting I use KS resin. Does it matter what resin you use & how do you know how long to have the resin in the pot before it starts to set up when you want to pour it instead of casting?

@JakeThompson 3 жыл бұрын

Hello Deb., a pressure pot helps with any kind of resin. If you have something you are coating and it won’t fit in a pot.. you have to use a torch. If you have problems with bubbles.. make sure you are stirring the epoxy gently and not introducing air bubbles yourself. When you use a pressure pot, there’s always a demold time on the instructions you use. Keep it in the pot for that long.. I hope this helps.

@UrbanAnubis 3 жыл бұрын

how much vertical space is there inside? a have a small statue mold that's about 8 inches tall. would that fit?

@JakeThompson 3 жыл бұрын

There is about 9 inches top to bottom in the pot.

@delurquhart7324 3 жыл бұрын

Have you ever casted any thing in resin for which reason that you did not put in a pressure pot because I tried into a without a pressure pot at all you can’t see the bubbles because of the pigment I put in I think there are still bubbles underneath because as I started to turn it on my lathe I ended up with chips out of the resin I was wondering if you ever experienced that

@JakeThompson 3 жыл бұрын

del urquhart I use the pressure pot for everything unless I’m using liquid diamonds epoxy, it does pretty good without a pressure pot.

@knottypenshop1346 3 жыл бұрын

Hi I use my Harbor Freight pressure pot for pain links leaks all the time

@JakeThompson 3 жыл бұрын

Lol.. mine sure does.. lol

@AdamSouder Жыл бұрын

I've tried using an electric car tire pump to pressurize it and it seems to put pressure in, but it leaks from the large black pressure valve through the part you turn to let more air in. Seems like the valve might be bad? Can I get away without using the valve if I'm using a tire pump?

@JakeThompson Жыл бұрын

I’ve never used a tire pump and I recommend using a air compressor with a tank the size of the pot to fill the pressure pot effectively.. some people run the pot without a regulator. You fill to your desired psi and shut the inlet valve.. I use the regulator.

@bug5344 10 ай бұрын

I know this video was made a while ago, but would you ever consider doing a video on safety with these pots?

@JakeThompson 10 ай бұрын

Thank you for watching the video.. The max pressure is on the tank and there’s a regulator and pop off valve on the unit. I show how to adjust both on this video and I say to go 10psi below the max.. I’m not quite sure what else I could say about safety.. plz let me know if I’m missing something?

@efreets14 3 жыл бұрын

Hi! Maybe a dumb question but is it bad to release air pressure through the ball valve area?

@JakeThompson 3 жыл бұрын

You can release air from the ball valve.. but it’s slower than using the pop off valve.

@ChillyJack 3 жыл бұрын

Really glad I watched this before I went out to buy the pot from Harbor Freight. Rather not spend $100 on something with a bunch of headaches when I can spend a couple to a few hundred on a better pot actually made for resin, and made in the US instead of China.

@JakeThompson 3 жыл бұрын

I feel the same way. But lots of folks want to do it the cheapest way possible.. I try to show both ways.. 👍👍👍

@bellabell01 3 жыл бұрын

Good video, what pressure pot do you use now? Thanks, I’m looking to buy one. Probably worth spending the extra money and get a pressure pot for casting resin

@JakeThompson 3 жыл бұрын

I have this one now and I love it.. kzfaq.info/get/bejne/iZykqbOktautgWQ.html

@BearCreekWoodworking 3 жыл бұрын

My name is Carl, and I made it to the end...lol.

@JakeThompson 3 жыл бұрын

Bear Creek Woodworking Hi Carl!! 👋👋 Thank you!!

@barbaraharmer7353 3 жыл бұрын

OK from a beginner who has never used a pressure pot, but really wants to use one, where is the air coming from? Do I need to purchase an air compressor too???

@JakeThompson 3 жыл бұрын

Thank you for watching Barbara.. yes.. you need an air compressor to fill the pressure pot.

@Doomblade403x 3 жыл бұрын

Thank you sir. the pop off valve was a pain in my ass

@JakeThompson 3 жыл бұрын

Very welcome.. lol

@Doomblade403x 3 жыл бұрын

I have a leak just pop up from the regulator. There is a little hole there that just hisses air out at a slow level. On the internet I got intel that said the diaphragm is bag and needs replaced. I've been looking for a video on how to change it to no avail.

@JakeThompson 3 жыл бұрын

Normally people will just replace the regulated if something is wrong with it.

@debbeneman9792 3 жыл бұрын

Can't you buy a pressure pot all ready to use with out having to buy other parts & assemble or change all those things?

@JakeThompson 3 жыл бұрын

Deb Beneman You can.. but it’s lots more expensive so this is just a cheaper option.

@lieutenanthoss4069 3 жыл бұрын

Hey Jake! I’m having issuers with the Teflon top sealing in one spot. Any recommendations? I’ve done it about 4-5 times with varying amounts of Teflon top and to no avail.

@JakeThompson 3 жыл бұрын

Look for liquid Teflon .. works good for me. 👍

@lieutenanthoss4069 3 жыл бұрын

@@JakeThompson appreciate it! I’ll try that 🤙

@thurow37 Жыл бұрын

Could you add another silicon washer to prevent the leaking? Or will it not help due to pressure out?

@thurow37 Жыл бұрын

NVM....someone already asked 😅

@JakeThompson Жыл бұрын

😀👍👍👍

@robvail3894 3 жыл бұрын

I just completed the transformation of the HF pot to a casting pot per your video. Everything seems fine but there is one air leak I can't get fixed. It's at the regulator valve. If tightened it as much as I can, both on top of the pot as well as the nut under it. I've taken it off and retaped it and still it leaks. I out 50 lbs of air in and in about a half hour it has dropped to 20 pounds. Do think caulking on the top of the valve would help? Thanks for any advice you might have.

@JakeThompson 3 жыл бұрын

There’s some stuff called liquid Teflon, it works pretty good.. but I would leave the air hooked up so if it leaks the regulator will keep it at 50 psi

@robvail3894 3 жыл бұрын

@@JakeThompson Thanks. I'll try that.

@manicmaker52 3 жыл бұрын

My name is Gene, anything I can put in resin kinda like Peter Brown...Great video.. Cant wait for you to check out my pressure pot I'm building..lol

@JakeThompson 3 жыл бұрын

Awesome Gene!! Peter brown is awesome!!👍👍 I cant wait to see it!! 👍👍

@nestoroarce 3 жыл бұрын

I just got my harbor freight pot because of how you made it look so simple to convert in your video!...Question however.... the regulator T screw where you let in air ....does it normally leak air out of there also?....I'm having that .....from a small existing hole right above the T crew area of the regulator ....I'm trying to figure out the best position on it to keep it at at least 50psi...and the Manuel just says clockwise for more and counter clock for less....I'm trying for just above 50..like 55 but it wont let me

@JakeThompson 3 жыл бұрын

Thank you for watching the videos.. of you have that to where it regulates to 50psi or so and the hole in the regulator leaks.. the regulator is faulty.. you will need to take the entire thing back and exchange it or buy a new regulator.

@nestoroarce 3 жыл бұрын

Dang it....I figured that was the case.....thanks for the reply! 👍👍

@gman6648 3 жыл бұрын

How long does it take while it is in the pressure pot? I'm sure one factor is how much is inside the pot, but what if, say, 4 pen blanks are in the pot at 50 psi? Really enjoy your videos! Keep them coming!!

@JakeThompson 3 жыл бұрын

If it’s alumilite clear slow you can take them out of the pot in 2 hours... the smaller the amount you pour the longer you need to leave it in there.. it takes longer for the chemical reaction to take place with a lesser amount of resin. Resins or epoxy with longer working time, I just leave overnight

@bobridout 3 жыл бұрын

I made it to the end.

@JakeThompson 3 жыл бұрын

Thank you Bob!!👍👍

@TheRealSelenaLeath Жыл бұрын

Hello, I’m new to all this so i apologize if this question sounds silly or simple. Can i use a simple portable air compressor electric pump for this kind of pot for the air?

@JakeThompson Жыл бұрын

The tank on the air compressor needs to be similar size to the pot to make sure it fills up fast

@TheRealSelenaLeath Жыл бұрын

@@JakeThompson ooh, oh okay! Thank you for your quick response! 🙂

@yukihiro140 3 жыл бұрын

I’m working in my home so need to buy a compressor, I’m completely new would you mind giving some advice on how to choose a compressor. Would my mini airbrush compressor be sufficient? Thanks so much for all the information!

@JakeThompson 3 жыл бұрын

You need a compressor with a tank as big as your pressure pot tank..

@yukihiro140 3 жыл бұрын

@@JakeThompson ok! Thank you so much!

@nylarac 3 жыл бұрын

could you link an air compressor that would be compatible with this? also a tube that would be compatible if air compressor doesn't come with it?

@helmeteer 3 жыл бұрын

any air compressor and hose would work really

@ICECREAMandPIES 3 жыл бұрын

Be careful tightening it. I have destroyed one of the clamps from tightening it too much. What I'm going to do to fix it is get a 3 inch clamp for about $4 and drill a hole in the bottom of it to use as an additional clamp. I do worry about it not being strong enough but I'll see. I'm also gonna get gasket material and see if I can tighten it less

@JakeThompson 3 жыл бұрын

👍👍👍

@markdrexler382 Жыл бұрын

I just purchased the same pressure pot and made the alterations as shown in your other video. I’m putting air into the pot to set the regulator and the safety valve. The valve keeps popping at about 38lbs. I believe I’m bottomed out on the adjustment by screwing the slotted ring clockwise. It’s down so far I can’t get it to turn anymore. Still popping at 38lbs ( I’d like to get it set at 50lbs). Am I doing something wrong?

@JakeThompson Жыл бұрын

Hello Mark.. if you followed the directions exactly how I showed.. it’s probably a defective pop off valve.. might have to exchange it

@markdrexler382 Жыл бұрын

Ok thank you. I’ll get a new one

@TxMasterOfNone 3 жыл бұрын

I have a leak at the joint under the gauge. I’ve taken it apart, wrapped the threads with Teflon tape, added a liquid thread sealer to the threads, and reinstalled but still leaking. Can you stop a slow leak without taking it apart again? Like maybe using hot glue or something similar?

@JakeThompson 3 жыл бұрын

I would take it back and get another one.. if it’s a tiny slow leak. I would just leave the air on..

@TxMasterOfNone 3 жыл бұрын

@@JakeThompson Thanks. Leaving the air on may be the way to go.

@edgarmiears5992 3 жыл бұрын

Jake, why can’t you use the vacuum pot to get bubbles out of scales??? The reason I ask is you use the vacuum pot to suck all the air out off wood to stabilize wood.

@JakeThompson 3 жыл бұрын

You have to have a resin with a long working time to be able to use a vacuum chamber. The resin I use is ready to set up in 12 minutes..

@edgarmiears5992 3 жыл бұрын

@@JakeThompson thank you Jake. I watch all of your KZfaq videos and have learned so much. Thank you again

@MuffinMan0521 3 жыл бұрын

How do you fix the pull release? I tried using a screwdriver to tighten it but it still releases pressure around 40 something psi.

@JakeThompson 3 жыл бұрын

MuffinMan0521 I show in the video how to adjust it. If that doesn’t work, then it’s a faulty pop off valve.

@MuffinMan0521 3 жыл бұрын

@@JakeThompson Thanks. Must be a faulty one. I just ended up replacing it with a ball valve since I have a regulator set on my air compressor to 50psi.

@viridianwarrior 2 жыл бұрын

I bought one of these today. did everything in your videos correctly, except it is slow leaking from the weld around the inlet. On the lid. Is there anything I can do?

@JakeThompson 2 жыл бұрын

Take that one back and exchange it. That’s what I would do.

@viridianwarrior 2 жыл бұрын

@@JakeThompson Thanks for the quick response! Yeah I think I will because I already don’t trust it haha it looks really janky. Hopefully I’ll be all set up and ready to cast tomorrow eve! Love the channel btw!

@JakeThompson 2 жыл бұрын

@@viridianwarrior Haha.. I know the feeling.. glad you like the channel. 👍👍

@terryraines9952 3 жыл бұрын

just getting into pen casting and maybe a video , but working on my pressure pot atm, but can you tell me what kind of camera your using to shoot your videos? thank you, I've learned a lot from watching your videos

@JakeThompson 3 жыл бұрын

Terry Raines I use a cannon DSLR for the wide shots and my IPhone 8plus for closeups.. I think I’m about to switch to all iPhone soon. It takes a nice video. 👍👍 I’m glad you enjoy the videos. 👍👊

@terryraines9952 3 жыл бұрын

@@JakeThompson and the lens?

@JakeThompson 3 жыл бұрын

Terry Raines 18-55 mm is my fav

@BearCreekWoodworking 3 жыл бұрын

The price between the 5 gal. California and the 2.5 gal. Global is fairly close. Is the Global a better brand?

@JakeThompson 3 жыл бұрын

Bear Creek Woodworking I feel like they are about the same.. both are going to be nice pots.

@BearCreekWoodworking 3 жыл бұрын

@@JakeThompson Thanks for the infor Jake.

@raygonzales8244 3 жыл бұрын

Clear casting labels.

@JakeThompson 3 жыл бұрын

👍👍👍

@CrGm1AkS1ZrW 3 жыл бұрын

For deep pour resins is a pressure pot needed?

@JakeThompson 3 жыл бұрын

Gerrant Mata It’s not needed but you need to pop bubbles with a torch or heat.

@katjoe1974 3 жыл бұрын

I’m finding adjusting that pop valve to be a huge pain. It’s loose enough to be leaking without fully popping at like 30psi but I can’t seem to screw it in any tighter without just chewing up the brass

@JakeThompson 3 жыл бұрын

Sometimes they need replaced from the start.. cheap stuff..

@katjoe1974 3 жыл бұрын

@@JakeThompson yeah that's what I'm going with. Just not happy to have to wait til the end of the week to be able to use the thing when I spent the day today building it. Cheap import tools- what can you do?

@JakeThompson 3 жыл бұрын

@@katjoe1974 totally agree

@danthemakerman 3 жыл бұрын

Hi!! Mi nobre es Daniel I like to try pressure casting too!

@JakeThompson 3 жыл бұрын

Dan The Maker Man Mucho Gracias Daniel! 😄

@jpenn260 3 жыл бұрын

✋🏼I don't resin cast. I just enjoy watching the videos of wood turning and other maker type things.

@JakeThompson 3 жыл бұрын

Awesome Joyce!! Nothing wrong with that at all!! 😄👍

@joshcarnprobst9739 3 жыл бұрын

Do you have a link for the seal you got on Amazon?

@JakeThompson 3 жыл бұрын

www.amazon.com/gp/product/B00KHY3U9W/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=jakethom-20&creative=9325&linkCode=as2&creativeASIN=B00KHY3U9W&linkId=8c12b24732aad3928f57bcbbffd8320a Here ya go.... works great

@joshcarnprobst9739 3 жыл бұрын

@@JakeThompson thank you! Just got mine set up and this was my only Issue. Much appreciated man

@patricklucia7926 3 жыл бұрын

I make lazy Susan’ from log 2” thick

@JakeThompson 3 жыл бұрын

Patrick Lucia awesome!!👍👍

@emmanuelgarcia7790 3 жыл бұрын

Please help why my safety pin goes off at 20PSI and how can I fix that

@JakeThompson 3 жыл бұрын

This video shows how to adjust it.. if it won’t adjust properly.. it needs replaced

@snowboarderx8 2 жыл бұрын

when i'm filling my tank for the first time it's making a pinging noise... should i be worried? i haven't gone over 50psi.

@JakeThompson 2 жыл бұрын

Mine did it too the first time. No problem.

@snowboarderx8 2 жыл бұрын

@@JakeThompson awesome thanks for the quick response. i figured it was everything "settling" expanding a bit.... creaking lol

@jamescanning5647 3 жыл бұрын

I just bought the same pot last week and the only problem that I have is that the air pressure valve goes off when it his 43lbs? How can I get it up to 55 Lbs? I have no leaks.

@JakeThompson 3 жыл бұрын

In this video I go over how to adjust the valve.. if it doesn’t help.. the valve needs replaced.

@jamescanning5647 2 жыл бұрын

@@JakeThompson Thank you I did have to replace it!

@JakeThompson 2 жыл бұрын

@@jamescanning5647 awesome.. I’m glad it works now. 👍

@omarrivero818 3 жыл бұрын

Do you know where to buy a better pot?

@JakeThompson 3 жыл бұрын

I put a link in the description. 👍