Converting a Harbor Freight Pressure Pot for Resin Casting

Рет қаралды 321,101

5 жыл бұрын

This week we are converting a Harbor Freight pressure pot for resin casting. I have become interested in Alumilite Resin Casting recently and headed to harbor freight to pick up a paint tank to convert to a pressure pot. There are plenty of good videos on how to convert the Harbor Freight paint pot into a pressure pot for resin casting. I figured I would make another conversion video for you to compare.
My Site www.northsidecustomcrafts.com...
Tools in my Shop www.northsidecustomcrafts.com...
UPDATE : Since this video has been posted, lots of new options for pressure pots that are made ready for Pressure Casting are available. Here are a couple.
2.5 gallon Pressure Pot ...No conversion needed : amzn.to/3yEvxPy
5 gallon Pressure Pot ..No conversion needed : amzn.to/3Am2mCc
Zac Higgins Video: • Setting Up a Harbor Fr...
Heath's Dino Egg Video: • #41 Noah’s Dino Egg 💜
AFFILIATES... Enjoy discounts from the companies that support our channel!
ALUMILITE... Jake10
Jake10 at Checkout: www.p3hfsftrk.com/JAKE10/
MAS Epoxies .. JakeT10
JakeT10 at Checkout: www.p3hfsftrk.com/JakeT10/
EYE CANDY PIGMENTS... Jake15
Jake15 at Checkout: eyecandypigments.com/Northsid...
EPIDEMIC SOUND... Copyright Free Music.
Click here for Copyright Free Music: www.epidemicsound.com/referra...
Fittings needed for this conversion:
As an Amazon Associate I earn from qualifying purchases.
Ball Valve: www.amazon.com/gp/product/B00...
1/4 cap: www.amazon.com/gp/product/B00...
3/8 - 1/4 adapter: www.amazon.com/gp/product/B00...
90 degree elbow: www.amazon.com/gp/product/B00...
1/4 brass quick connect: www.amazon.com/gp/product/B00...
Teflon Tape: www.amazon.com/gp/product/B06...

Пікірлер: 1 100

@georgiyamitchell4104 Жыл бұрын

The way you lay out all of the parts needed, in their packages and saying where you got them from - just epic, chef’s kiss. I’m armed with screenshots to take to the store and ready to rock this 💪

@JakeThompson Жыл бұрын

Thanks for the Kiss.. I appreciate it.. some of the new harbor freight models have a different fitting I’m told.. but you will be able to get where you need to go with your screenshots 😀😀

@TheDarkArch0n 10 ай бұрын

@@JakeThompsonmine didn't fit the 1/4 connectors on the gauge, I had to go get all new parts!

@JakeThompson 10 ай бұрын

@@TheDarkArch0n that’s unfortunate .. All new parts.. I’ve heard some people say that there have been one fitting that they have changed over the last few years.. are you saying that none of the parts I listed work?

@TheDarkArch0n 10 ай бұрын

@@JakeThompson the release valve worked, but the pieces that connect to the pressure gauge did not fit, 1/4 was too small. Update: I needed 5/16" pieces and an adapter back to 1/4" and it worked like a charm!

@Molly_W 4 жыл бұрын

Thank you for plainly showing the parts needed to convert this pot!

@JakeThompson 4 жыл бұрын

Molly Whitebear Very welcome!! I thought it would make it easier and less intimidating.. 👍👍👊

@witchlamb 3 жыл бұрын

thanks for this. i’ve seen a few guides on how to do this conversion but none that actually showed the process step by step. gonna get my pot set up this weekend i guess!

@JakeThompson 3 жыл бұрын

Awesome!! Thank you for watching

@Tydwhitey 6 ай бұрын

It's been 4 years since I first saw your video (took me that long to get around to it) but I've finally got my paint pot. I had to hunt this video down again because I really appreciate how straight forward it is. Thanks for sharing your knowlege with the rest of us!

@JakeThompson 6 ай бұрын

Thank you Sir.. I’m glad I could help.. I’m glad you are going to get to pressure cast.

@SaulMaddox 3 жыл бұрын

One thing I have seen others do with this pressure pot is poor silicone into the bottom and let it set/harden before first use. This fixes the dome bottom issue and they now have a flat surface when placing things inside of it. Just another alternative to placing a block of wood with your favorite superhero inside of it. :D Thanks for this video! I also watched a few of your other videos and they are great stuff! This is a whole new hobby world that is exciting!

@hollyphillips388 2 жыл бұрын

I use an 8 in pie pan to bottom mine out.

@wolflahti412 2 жыл бұрын

An advantage of using silicone to level the bottom is that spilled resin won't stick to it.

@sherryebersole1349 2 жыл бұрын

I was wondering about that. Thanks

@micstica 2 жыл бұрын

Pourable silicone, which product would that be?

@sherryebersole1349 2 жыл бұрын

@@micstica there are lots of them. Put in silicone kits for silicone molds and there will be tons that come up. Smooth on is a popular one

@ngrrailway 3 жыл бұрын

Jake, great job showing the difference in the castings with and without the pressure pot! Superb video!

@JakeThompson 3 жыл бұрын

Thank you very much Richard.. I’m glad you enjoyed it. 👍👍

@Mike_VH 3 жыл бұрын

Thanks Jake. Your video helped me convert a pot and now I’m slowly getting into more resin projects. Thanks!!!

@SamuraiSwimmer 4 жыл бұрын

By far the best and definitive video on how to do this. Thanks so much for taking the time to help us nubes out here!

@JakeThompson 4 жыл бұрын

Louis Lux Absolutely!! Thank you!!! 👍👍

@keithkent7223 3 жыл бұрын

Gunna be honest you have explained this the best. You explain the why. That is so important. Thank you!

@JakeThompson 3 жыл бұрын

You're very welcome! I'm happy I was helpful. Thank you for watching!

@blinnlambert 5 жыл бұрын

Thank you for making this video! Like you mentioned at the beginning, I've been "watching and watching" pressure pot conversion videos and yours is by far the most straight-forward and explicitly detailed showing the entire method and materials needed to convert the pot. I now have a clear picture of how to get this done!

@JakeThompson 5 жыл бұрын

blinnlambert Awesome, I’m so glad I could help you out!! I hope you have lots of fun!!

@GiseleGrenier 4 жыл бұрын

I agree, this one was the easiest to follow and finally mine put together.

@georgetonkovic1275 4 жыл бұрын

Thank You for posting your conversion process. Just bought the pot and now I have a list of the extra parts needed and how to do it. Great Video.

@JakeThompson 4 жыл бұрын

George Tonkovic Awesome!!! Have fun!!

@danielemanuele5827 3 жыл бұрын

Absolutely the best explanation on how to convert this paint tank. Thanks a million.

@JakeThompson 3 жыл бұрын

Daniel Emanuele Thank you and I have another video coming out tomorrow to answer more questions people had.. Thank you for watching. 👍👍

@aksouthsida 4 жыл бұрын

Thanks Jake. Loved the video. I've seen people talk about these pots but had no idea what they were or how to use them. Just bought a lathe today. Going to start with basic wood items but will be moving to resin/wood mixes soon as I get some skills

@JakeThompson 4 жыл бұрын

Troy Fairclough That is awesome!! I hope the video answered all of your questions. Happy turning, you will have lots of fun!

@901EE 5 жыл бұрын

I've been using pressure/vacuum cycles for resin casting for about 40 years. If you have long enough working time you can first vacuum to expand bubbles and get them to float to the top, then while the resin is still not cured, increase the pressure to 4-5 atmospheres and this will collapse remaining bubbles and make a more dense casting. This is a well done presentation on making a pressure pot out of a paint pot. Well Done! The vacuum cycle can cause the resin to foam up and run over the top of the containment so you really need a window so you can see what's going on inside the pot.

@JakeThompson 5 жыл бұрын

901EE Great information! Thank you for your comment. I’m glad you enjoyed the video!! !👍👍

@rpmazzella 5 жыл бұрын

This was the best video I have watched on the pressure pot conversion. Nice job Jake.

@JakeThompson 5 жыл бұрын

Ron Mazzella Thank you very much!! I’m glad I could help you out!! 👍👍👊

@oyvonnee 2 жыл бұрын

Thank you for a great video. I've watched several but no one but you showed all the parts you need. I finally feel confident I can do this. YOU ROCK!

@JakeThompson 2 жыл бұрын

Very welcome Yvonne.. glad you enjoyed it. 😁 Thanks for the Sweet Tea! 😁😁

@Chanzlyn 4 жыл бұрын

This was truly a blessing, thank you so much for making this! It made my life A LOT easier.

@JakeThompson 4 жыл бұрын

Lucky Jackson Awesome!! I’m super happy I could help ya out!!

@jessemacey2373 3 жыл бұрын

It sure did. Saved me tons of time

@DowneastThunderCreations 5 жыл бұрын

Awesome Jake! You've inspired me to give Harbor Freight more of my money! Cool video - thanks again.

@JakeThompson 5 жыл бұрын

Downeast Thunder Creations Haha.. I always seem to find a way to give them my money.. lol 👍👍👍

@elevatordancer 3 жыл бұрын

Thank you so much! Your instructional video is easier to follow than others on this same project. Because of you, I just successfully tested my first pressure pot.

@JakeThompson 3 жыл бұрын

elevatordancer Awesome. I’m glad I could help you out!👍👍

@TheAirtime23 4 жыл бұрын

Used your method yesterday and it worked great! Also, purchased all the parts from amazon using your link....very helpful. Thanks so much!

@JakeThompson 4 жыл бұрын

Shoaib Lateef Awesome!! Thank you.. happy Casting!!

@spocksvulcanbrain 5 жыл бұрын

Thank you for listing all the parts. Hard to know exact parts without trial and error. Just bought my pot. Now to order the parts....

@JakeThompson 5 жыл бұрын

Kirk Ryan Awesome!! I’m glad I could help you out.. let me know how it goes!! 👍👊

@goodgollymsmolly 5 жыл бұрын

Thank you so much for laying out all the parts needed and providing links. Very helpful video!

@JakeThompson 5 жыл бұрын

Ruthie Rhodes No problem.. glad you found the video helpful. 👍👍👍

@goodgollymsmolly 5 жыл бұрын

Do you have any advice for leakage? Right out of the box the lid is leaking air at 25 psi

@JakeThompson 5 жыл бұрын

Ruthie Rhodes use petroleum jelly on the seal and tighten as tight as you can.. I’m going to replace the wing bolts with regular bolts so I can tighten them with a wrench.

@goodgollymsmolly 5 жыл бұрын

I'll try that, thanks!

@jayvan4353 4 жыл бұрын

Thanks Jake, followed your instructions and built this thing in about 10 mins. Works great!

@JakeThompson 4 жыл бұрын

Jay Van Awesome!! I’m glad I could help!! 👍

@jenniferlewis9130 3 жыл бұрын

Thank you so much for this video, i appreciate you showing all the steps as you do them and explaining everything in detail.

@JakeThompson 3 жыл бұрын

Thank you Jelly!! I’m glad I could help.. and I’m glad you enjoyed it.👍👊

@gardeningdianne 5 жыл бұрын

This would have to be the best explained video on how to convert a pressure pot for resin casting. Well done Jake. I have just bought my pressure pot today and I just need to see if the instructions regarding parts and thread sizes are the same in Australia.

@JakeThompson 5 жыл бұрын

Dave Clarke Thank you for this comment.. it makes me happy to know that people are benefiting from my videos. 👍👍👍👍

@DeathMetalDadReacts 3 жыл бұрын

Saved this video for when I get the money to buy the materials. Thanks!!!

@JakeThompson 3 жыл бұрын

Awesome!! Thanks for watching!!

@ulysseshyman7473 3 жыл бұрын

Thank you Jake from Delaware for all of your insight. I just purchased the harbor freight pressure pot and set up. I look forward to following more project videos.

@JakeThompson 3 жыл бұрын

Awesome!! You will have some fun casting.

@NicholasYaekle 3 жыл бұрын

Hands down the best video on this pot I've found! Thanks!

@JakeThompson 3 жыл бұрын

Very welcome!! 👍👍

@CrossCutCreations 5 жыл бұрын

Yay! Welcome to the addiction of resin casting!

@JakeThompson 5 жыл бұрын

Cross Cut Creations lol... it’s about to go down!!!! Haha

@HeathKnuckles_Tasty_Timber 5 жыл бұрын

You are in trouble now! You’ll never have time to use your CNC now. 😉 Thanks for the shoutout brother. Can’t wait to see what you come up with! 👊

@JakeThompson 5 жыл бұрын

Heath Knuckles Thanks Man!! I can’t wait!! The first one out of the box should be pretty cool!!! The cnc will be ok with a nice break!!

@shaunfelton2046 4 жыл бұрын

This is the video I’ve needed for the last month! Thank you!

@JakeThompson 4 жыл бұрын

Shaun Felton Glad I could help!! 👍👍

@edgarmiears5992 3 жыл бұрын

You have taught me so much on all your videos. You are “ the man”.

@JakeThompson 3 жыл бұрын

Lol Thank you.. plenty more to come.

@adamvstylee 5 жыл бұрын

I followed your directions to the letter and everything worked out perfectly! I have never had crystal-clear castings. I am super excited to put this build to work. Thank you very much for posting this video.

@JakeThompson 5 жыл бұрын

adamvstylee You are very welcome!! I’m glad I could help. Happy casting!!

@rebelmarshall3632 8 ай бұрын

What is the point of rearranging the fittings? You could have just capped off the paint output fitting and the air out fitting on the pressure gauge, and save money.

@samantha7742 2 жыл бұрын

Your videos are hands down the best for learning. You're very thorough, knowledgeable and you consistently make everything accessible through links so no searching for any of the products. Out of a 5 star rating, you deserve a 10. I'm a follower for life lol

@JakeThompson 2 жыл бұрын

Thank you Samantha ❤️❤️

@gcartwright4411 10 ай бұрын

This video, hands down is the best video for showing how to convert this paint pot to a pressure pot for casting! Instantly subscribed!

@JakeThompson 10 ай бұрын

Thank you .. glad you enjoyed 😀

@JakeThompson 3 жыл бұрын

After many Questions from this video, I made a follow up video, I hope it Helps you out! Video HERE: kzfaq.info/get/bejne/h7-qpqeFsryte2w.html Also, here is a link to a better seal for the lid. amzn.to/2V8DGe2

@SDXStudio Жыл бұрын

For someone that is interested in resin casting, $300-$500 is an incredibly high barrier to entry to normalized pressure pots. I was so excited to find this method and hoping to be able to create clear casts in a few weeks opposed to months.

@JakeThompson Жыл бұрын

I used this pot for quite a while before going to the more expensive ones.. It will definitely get you going

@behindenemylines6371 3 жыл бұрын

Great video, Jake; you showed clearly, step-by-step, which is what clumsy guys like me need.

@JakeThompson 3 жыл бұрын

Awesome!! I’m glad I could help.

@PriscillasArte 2 жыл бұрын

Thank You so much for sharing this process!!! I have been so intimidated by using the pot for casting. But I think I'll be giving it a shot this weekend that's to your walk through.

@JakeThompson 2 жыл бұрын

Awesome!! Very welcome

@dtork47 5 жыл бұрын

Really helpful Jake, thanks. Clancy MT

@JakeThompson 5 жыл бұрын

dtork47 Very Welcome, glad you enjoyed it!👍👍

@RyanNiemer 5 жыл бұрын

Guess I'm going to Harbor Freight, darn lol. Thanks for the video!

@JakeThompson 5 жыл бұрын

Ryan Niemer Haha... good stuff!! Glad you enjoyed!

@Msredrobynhood 2 жыл бұрын

Helped so much for someone who had no idea how to do this. Thank you! ❤️

@JakeThompson 2 жыл бұрын

Very welcome Heather!! Glad I could help. 😁😁

@SgtofUSMarines96to04 5 жыл бұрын

Thanks for showing how well the blank in the pressure pot turned out!!

@JakeThompson 5 жыл бұрын

Aaron Miller very welcome, glad you enjoyed!! 👍👍

@paulahemphill1412 4 жыл бұрын

Please don't use petroleum jelly on rubber gaskets or seals, it deteriorates the rubber much faster. Use a silicone type.

@alschulze-woodworx7258 5 жыл бұрын

Oh nooooo, your gonna catch that maker disease......”turneritis” 😢😢😢 I’ve lost many good friends to this condition, I love you brother, we’ll get through it together Another great video Jake 😂😂😂!!!!

@JakeThompson 5 жыл бұрын

Al Schulze - WoodworX Haha Thank you Brother.. Can’t wait for your video!!

@timorhybobbitt9745 3 жыл бұрын

Definitely making one. Nice video.. couldnt have ask for a better HOW TO VIDEO.. learnings alot thanks buddy

@JakeThompson 3 жыл бұрын

Thank you Very much.. I’m glad you enjoyed. 👍👍

@DeadriseWoodCrafts 5 жыл бұрын

I bought a paint pot and I knew exactly what channel do come to!! Thanks Jake.

@JakeThompson 4 жыл бұрын

Deadrise Wood Crafts How did I miss this comment??? Lol

@brianfoster7064 5 жыл бұрын

If like to see pressure vs non-pressure with vacuum to remove bubbles before pouring.

@pairaboots 5 жыл бұрын

that was a good way to show what you did ,but if you do larger castings you will need to deflect the air so it dose not blow straight down , it should go to the sides .great job I just sub ed

@JakeThompson 5 жыл бұрын

pairaboots Thanks for watching!! The back side of the air inlet deflects air.. and when I do larger castings I let the air in very slowly. I’m glad you enjoyed and thanks for the sub. 👍👍

@gaylegreer9798 4 жыл бұрын

This will finally convince my hubby (and me) to buy a pot!!! Thanks for the tutorial!!

@JakeThompson 4 жыл бұрын

Gayle Greer Awesome!! I’m glad I could help ya out!👍👊

@intuitiefreader3539 4 жыл бұрын

The best step by step explanation I’ve seen

@JakeThompson 4 жыл бұрын

Ineke Helmich Thank you very much. I’m glad I could help! 👍👍

@abad77camaro 5 жыл бұрын

Hey jake, great video! Made it really easy to retro-fit the system for this use. I'm having an issue that the hole in the regulator that allows it to set the pressure, constantly leaks no matter which way the regulator knob is turned. Am I doing something wrong?

@evanurchin Жыл бұрын

I am having the same issue on two pots. Can't for the life of me find another 60psi value to replace it with. Tempted to just cap it off completely, my compressor only puts out 110psi, and the pot is good for 90psi, so unless I'm using gross negligence, I shouldn't have any problems??

@Growyourheirlooms 5 жыл бұрын

Am I the only one that noticed he put the teflon tape on wrong? Good video btw. Thinking about buying one of these. Although the reviews on HF are not so great. But they are a good price

@JakeThompson 5 жыл бұрын

Grow Your Heirlooms I think the only other one that noticed was on reddit. But I expect that out of them... good news is it doesn’t leak. The tank works pretty good for this.. if you are going to do bigger castings, go for a bigger one.

@kdjwolf 5 жыл бұрын

I noticed. Not all of them though.

@boboluey 4 жыл бұрын

@@JakeThompson yes I did notice that about the tape also.lol

@johnkorn6698 4 ай бұрын

Thanks a million for posting this - exactly what I needed to walk me through the process. Well done!

@JakeThompson 4 ай бұрын

Thank you.. glad I could help out. 👍

@edgarmiears5992 3 жыл бұрын

Jake, thank you for showing me this video. I am going today to get my pressure pot.

@JakeThompson 3 жыл бұрын

Awesome... you are welcome!!

@robertyoung6235 5 жыл бұрын

The 3/8 pipe threads were likely metric.

@chaosjohn 5 жыл бұрын

What is the size of the circle that you cut? Edit: I went to Marshall home good and got a 9" round cake pan and it fit perfectly.

@JakeThompson 5 жыл бұрын

LightenS It’s about 9 inches and then I sanded for a nice fit.

@chaosjohn 5 жыл бұрын

@@JakeThompson thanks a lot By the way, do you test the relief valve by going to 60psi?

@crotchrocket81 4 жыл бұрын

just pour the bottom with resin and apply pressure, it'll be flat then.

@brentwhigham9289 3 жыл бұрын

Just bought one yesterday. Glad I found your video.

@JakeThompson 3 жыл бұрын

Awesome!! Have fun casting! 👍👊

@michaelm077 3 жыл бұрын

Cool video, I’m new to resin casting and turning and this video answered a lot of questions about using a pressure pot. Great job.

@JakeThompson 3 жыл бұрын

Thank you! I’m glad I could help you out.. plenty more videos to come. 👍👍

@dionnesimoneissmitten4436 Жыл бұрын

Just a quick note: The size of the current 6/22 pop off seems to be different than the connector. Unless I was shipped the wrong item and didn't notice. (It's not a big deal. I was so incredibly delighted to have the shopping links for shopping ease.)

@JakeThompson Жыл бұрын

When you get the correct fitting can you tell me the right size fitting so I can change the link.. I’m glad you enjoyed the links

@dionnesimoneissmitten4436 Жыл бұрын

@@JakeThompson yours is correct. They sent the wrong item. Thank you so much for the reply!!!!! And the tutorial!!!

@SimpleNature 4 жыл бұрын

I have a dumb question Jake. When I work with mixed material, I tend to use vacuum to remove air pockets and bubbles. Why pressure?

@paulblair7515 4 жыл бұрын

More than one way to skin a cat?

@emmamakesbadart 4 жыл бұрын

Theres a really informative video about pressure v. Vacuum by Peter Brown

@SimpleNature 4 жыл бұрын

@@emmamakesbadart Yes, Peter Brown - kzfaq.info/get/bejne/ic6Dq7iYmb_dp6c.html Excellent! TY

@SimpleNature 4 жыл бұрын

@@paulblair7515 - looks like the cat's skin/bubbles shrinks in volume by 4.25X at 50 PSI if all is still fair with the world.

@justinp1278 4 жыл бұрын

I would personally vacuum it first to get the air out then put it in the pressure pot. The best of both worlds.

@afternoongarage 4 жыл бұрын

Thank you for sharing this. I will need to use a pressure pot for my project. Keep showing your good work!

@JakeThompson 4 жыл бұрын

Afternoon Garage Very welcome.. plenty more to come. 😄👍

@renej.g.keyzer-andre3002 5 жыл бұрын

Great video Jake! Very informative. Great sources and how-to info. Well Done!

@JakeThompson 5 жыл бұрын

Rene J. G. Keyzer-Andre Thank you very much , I’m glad you enjoyed it! 👍👍👊👊

@mamabearssheshedtracykeato6941 5 жыл бұрын

That's just proof for people that do not put resin under pressure. The difference is clear... pun intended here... lol. I only say that because buying blanks from someone else and paying twice as just doesn't make sense when you can create them yourself. Are you also going to be stabilizing wood?

@JakeThompson 5 жыл бұрын

Tracy Keaton I will get into stabilizing in the very near future. This process is a lot of fun for me. The creative aspect of it is endless, I can’t wait to see where this takes my mind. The downside for me is getting the wood, like burls and such is difficult and will be expensive. The pressure pot was fun to convert and a very mandatory piece of the puzzle. I’m glad you enjoyed the video!! 👍👍

@antilitarded4142 5 жыл бұрын

Jake.....I buy ALOT of wood burl on ebay from 2 pple mostly.....their store names are . www.ebay.com/usr/charleselkan?_trksid=p2053788.m1543.l2754 for CharlesElkan and www.ebay.com/usr/antlersexpress?_trksid=p2053788.m1543.l2754 for Anltersexpress.......they are VERY fair on prices and in my opinion have the best looking and fastest shipping.....they are the ONLY ones I buy maple burl from!!!.....check them out, you won't be disappointed!!

@JakeThompson 5 жыл бұрын

AntiLißTard ed Thanks a lot.. I will check it out!! 👍👍

@AaaaNinja 5 жыл бұрын

The bubbles are way less of an issue if you're making things with opaque resins.

@melimel9265 5 жыл бұрын

@@AaaaNinja yes but I think what he wants is clear so you can see what has been embedded in the resin

@wilbertolugo8700 4 жыл бұрын

go PACKERS GO,GO,GO

@JakeThompson 4 жыл бұрын

wilberto lugo Go Pack Go!!! 👍👍👊

@SABISHII_MUSHI 2 жыл бұрын

Thanks for the info. I was looking around for a DIY pressure pot and came across this. Really easy to follow instructions. I was looking at the price of the pot on the Harbor Freight site and noticed someone had added your video recently too. Seems you are helping a lot of people.

@JakeThompson 2 жыл бұрын

That’s super awesome.. I’m glad you liked the video and that I could help out.

@MustangWriter 4 жыл бұрын

Excellent How to video. I learned so many things. You're a great teacher. thank you.

@JakeThompson 4 жыл бұрын

MustangWriter Thank you very much for watching and leaving that nice comment.. I’m happy you enjoyed.. 👍👍

@NoName-uh3lp 4 жыл бұрын

It looks like you are applying the Teflon tape against the direction of the threads, why? The tape should end in the same direction the treads are going to get a better fit. Going against the threads will rip the tape off the fitting when you screw it on!

@JakeThompson 4 жыл бұрын

No Name I’ve had it for a long time now with no leaks at any threads.. you are correct and about the 10th person to point it out.. I hope you got something out of the video besides my substandard tape job.

@cdouglas1942 4 жыл бұрын

@@JakeThompson Good video Jake. The idea with tape is no leaks, you succeded. Before tape my dad taught me to rub bar soap liberally on threads...that works too.

@IICubeII 4 жыл бұрын

Any chance someone would be willing to help me make a caddy for the inside on this thing? I don't have access to a cnc. Honestly just need two rounds cut from mdf. Message me if we can work something out.

@shmoopy4265 4 жыл бұрын

Zac Fitzgerald you could possibly look for public workshops in your area. Some places have areas such as maker spaces where you can use machines and other tools.

@IICubeII 4 жыл бұрын

@@shmoopy4265 I have actually! The only one out here rents space on a monthly basis for around $250. That being said, I could always ask to just make a few quick cuts. Not sure if they'd let me just run in and out like that though. But yeah, bit rich for what I need unfortunately. I did come up with a solution though, just need to find a metal wire rack for displaying baked goods or whatever. One that'll fit in the pot and maybe even a multi layer one? If I find anything I'll try to report back! But I think that might be my best solution, assuming I can find one that's the right size.

@marshallbrummel1860 5 жыл бұрын

Thank you for the simple way to convert the pressure pot.

@JakeThompson 5 жыл бұрын

Marshall Brummel Thank you for watching Marshall!! 👍👊

@jorgemaldonado5575 5 жыл бұрын

Now I’m running to Harbor freight to buy one of those, thank you thank you thank you, excellent video

@JakeThompson 5 жыл бұрын

jorge maldonado 😄😄😄Thank you very much!! 👍👊

@blackbirdpie217 4 жыл бұрын

What you're actually doing is compressing the bubbles so they are so small you can't really see them.

@JakeThompson 4 жыл бұрын

Dave B 👍👍👍

@richardmoser6068 4 жыл бұрын

I would think that the pressure actually compresses the resin forcing the bubbles out faster than the other techniques such as heating the material.

@blackbirdpie217 4 жыл бұрын

@@richardmoser6068 there are some other videos demonstrating compression vs. Decompression. Compression hides the bubbles. They have no place to escape to with pressure may even pack a little more air into it than it already had. When the air pressure is taken off in a vacuum chamber the bubbles expand and float out but this creates foam, the foam rises out of the vessel and before the bubbles can pop/ collapse the resin sets up making a huge mess. You can remove gases from water and at very low pressures water will even cold boil. Think about a soda bottle under pressure the co2 gas is invisible, pop the top releasing pressure it expands and you can see bubbles.. as it has a way out.

@Agropelters 5 жыл бұрын

`why not pour alumilite in the bottom of the pot for leveling it...

@JakeThompson 5 жыл бұрын

headlightdog That’s a pretty good idea.. 👍👍

@joanbusby3213 5 жыл бұрын

headlightdog if your resin spills over the two will become one. That is why you would not want to pour resin into the bottom

@spocksvulcanbrain 5 жыл бұрын

@@JakeThompson Actually that's a bad idea. - prevents changing in the future - that would be a LOT more $$$ - precludes taking out platform if you need a bit more room at the top.

@petermarshall5450 3 жыл бұрын

Video is very well done with full explanation in a straightforward manner. I purchased the Pressure Pot; acquired the new parts (from Harbor Freight and Ace Hardware) and followed your instructions. Everything worked perfectly. One point: It was a challenge to disconnect the necessary parts from the Pot, but with some effort they came off. Thanks again. Peter

@JakeThompson 3 жыл бұрын

Thank you for the kind words Peter.. I’m glad the video was useful. 👍👍

@MuffinMan0521 3 жыл бұрын

Thanks for putting links to the mods in the description. I just ordered them.

@JakeThompson 3 жыл бұрын

Awesome!! I’m glad I could help out! 👍👍

@solypsomancer9540 3 жыл бұрын

Practical. To the point. Looks like you are enjoying yourself. Thanks.

@JakeThompson 3 жыл бұрын

Thank you 👍👍

@starwarsmikecustoms3366 4 жыл бұрын

Great job. Now you got me wanting to make one of those pressure pots.

@JakeThompson 4 жыл бұрын

Star Wars Mike Customs Go for it!! You got this! 👍👍

@TaylorRussell_TheAnimator 2 жыл бұрын

This video was INCREDIBLY helpful. My resin casts are bubble-free to an astounding degree and I feel I never would have achieved this without blowing my house up were it not for this very informative video. Thanks for making this (and doubly so with the amazon links) so that a dope like me could make this magic happen.

@JakeThompson 2 жыл бұрын

😁😁😁 Awesome .. I’m glad you got it put together and are casting.. glad I could help you out. 👍👍

@TaylorRussell_TheAnimator 2 жыл бұрын

@@JakeThompson oh wow, wasn't expecting a response! Yeah man, I really appreciate this video, honestly, the how-to section was excellent but the thing that sold me was your comparison between the pressurized and non-pressurized resin. It was night and day and I was SOLD. Then I get to go back and follow your very sensible how-to again and like... Man, I never woulda figured this stuff out on my own. thanks again and keep being awesome, hope your granddaughter is happy with your resin casts!

@Foxfire-oo9bs 4 жыл бұрын

Been thinking making a pressure pot/getting a pressure pot was out of my price range. This + a little compressor from HF is doable. Thank you for posting!

@JakeThompson 4 жыл бұрын

Taylor Payne If course.. Thank you!!

@fefabre 4 жыл бұрын

Great video. I just bought my pressure tank from Harbor Freight and ordered the hardware from Amazon. Can’t wait to assemble and try it.

@JakeThompson 4 жыл бұрын

fefabre Thank you!! Have lots of fun casting!! 👍👍👊

@fefabre 4 жыл бұрын

Got my parts today and put the pot together. Tomorrow will be my first use and looking forward to it.

@AmyChappell 4 жыл бұрын

Totally making this this weekend! Thank you!

@JakeThompson 4 жыл бұрын

Amy Dunloe Awesome!! 👍👍👊

@WrenagadeWorkshop 5 жыл бұрын

Oh hell yeah! I've been contemplating on doing just this for some time, already made a degassing chamber (12x12" unit from a helium bottle) but high pressure scares the s**t out of me so I've been putting it off. Now I've seen it done successfully, I may just have to put it on my "to do" list now, thanks for showing us the way :D

@JakeThompson 5 жыл бұрын

WrenagadeWorkshop Lol!! Lots of people use the harbor freight pot. I did get a bigger one.. should make a video this week, nothing wrong with the harbor freight one though.

@vidcargonzalez9210 Жыл бұрын

Noice quick and easy Took me a while to find a good instructor, straight to the point much appreciated.

@JakeThompson Жыл бұрын

Thank you .. glad you liked the video 👍👍

@vidcargonzalez9210 Жыл бұрын

@@JakeThompson Hey sorry to bug. I can't seem to adjust the pressure cap any ideas on what I'm doing wrong. the max psi I get is 30.

@JakeThompson Жыл бұрын

@@vidcargonzalez9210 check out the pinned comment at the top of the comments. There is a link in that one.

@SeansWoodBarn 4 жыл бұрын

Thanks for the great video Jake, I had a vague idea of what I needed to do, but you really clarified it for me. I will say this tho... because my local "big box" store is usually lacking in the restocking department, I had to do design on the fly kinda thing while standing in the air tool isle. Because of that, I ended up buying extra stuff just to avoid a return trip. I ended up realizing that you only need three adapters. I didn't use the supplied "T" or gauge. I relocated the blow out valve the same as you, but the input is just the hose adapter to a ball valve to an inline pressure gauge. It's just a much simpler version of what you showed us. Thanks for getting me pointed in the right direction... can't wait to use it!!

@SeansWoodBarn 4 жыл бұрын

I tried to upload a pic.

@pollyrobinson3877 4 жыл бұрын

Love your scoreboard in the back.

@JakeThompson 4 жыл бұрын

Polly Robinson Thank you Polly!! 😄😄

@danthemakerman 5 жыл бұрын

Nice tutorial, if I ever get in to doing this kind of stuff I will definitely refer to this video.

@JakeThompson 5 жыл бұрын

Dan The Maker Man Thanks Dan! I watched a ton of these videos before I decided to do it.. I tried to cover all of the parts I was fuzzy on. 👍👍

@braveheart51able 4 жыл бұрын

Thank you so much....I got your link from Kim Tippin. I thought this was going to be a difficult process but you made it easy... May get my pot and parts today.......Thanks again for keeing it simple!

@JakeThompson 4 жыл бұрын

robert simms Absolutely!! I’m going to thank Kim for sending you my way!! 👍👍

@braveheart51able 4 жыл бұрын

@@JakeThompson Got the pot yesterday and the pieces HF had. Our Lowe's didn't have the elbow and cap so looking elsewhere. Should be done tomorrow....or as soon as I locate the elbow and cap! Thanks again!

@SusanGriggsPhoto 3 жыл бұрын

Great, easy to follow vid! Thanks a ton!

@JakeThompson 3 жыл бұрын

Thank you!! 👍👍

@mrlover013070 4 жыл бұрын

Another tutorial. Well done. Congratulations

@JakeThompson 4 жыл бұрын

Enrique Ramírez Thank you very much!! Glad you liked it!👍

@AwesomeChampWresslin 2 жыл бұрын

Thanks so much for this tutorial!! I just picked up a tank for this.

@JakeThompson 2 жыл бұрын

Sweeet.. glad I could help out

@Gingin7321 Жыл бұрын

I got a new pressure pot for Christmas, I picked it out, though it was made for epoxy resin casting...But when I got it, found out that it wasn't 😔. So I found this video and can now convert it into one. 😁 Thanks Jake ❤️

@JakeThompson Жыл бұрын

Very welcome.. Have fun 🤩