This is the quick fix for you 2013 to Present M8 Harley Compensator noise or rattle. Call Lyle at Speed Pros for more!
Пікірлер: 35
@user-uv3zn3ib6dАй бұрын
Lyle is the best mechanic to work on my bike. Took care of me two years ago during Sturgis rally. Completely sold me on using ATF in my primary. Incredible difference.
@61flh5 күн бұрын
The timkens have a preload from the factory . It is important to torque back to specs when reassembling for bearing longevity. Ive watched people use an impact and overtorque the sprocket shaft bolt . Soon after they developed crank movement from timkens being hammered . I mean if you pull pusdhrods from the valve train you dont mix them up. Your bearings especially after run in are happiest running the preload torque spec.
@codyjohnson98283 ай бұрын
I have a 07 street glide with a brand new screaming eagle compensator and its still making a little clatter would the thicker spring take care of the rattling?
@MAHGlie3 ай бұрын
I have a '16 Road Glide Ultra. I hear an intermittent clunk in the primary at idle. The clutch action is great, but when starting it's like it hits a compression stroke, stalls then turns over and starts. My first Harley. It has 14,500 miles. Compensator? I'm pulling the primary cover this week.
@McclintockJoshua-hk1qd2 ай бұрын
Hi I have a 17 sg when I accelerate or lift off throttle it makes a clunking sound would fix that or would I need to do compensater also. When I say clunk I meant it's like clunk clunk clunk. No issues starting or shifting but definitely something wrong
@TheFattiusMaximus6 күн бұрын
Would a sign of a bad compensator include rattling/vibration felt through the footboards when the accelerator is released while traveling in gear. Also the bike slows down like if the brakes are gently applied. I checked all engine mounts l, which are in tact
@mikeleti39 күн бұрын
Hi, Obviously you shouldn't be able to turn the comp. by hand, but how much force should be needed to rotate up and down the ramp with a locking bar in place?? Thanks
@WyattSmith-pu6jm4 күн бұрын
I like rekluce over Barnett but isnt it very important to.not use impack on compensator due to possibly breaking magnets on stator from vibration?
@user-ux9nt1qd5hАй бұрын
Good morning i am wondering would you ship to Australia and how much would the compensator spring cost and shipping
@tricgix2949Ай бұрын
Hey there ..Great video. I was wondering since you put a thicker more beveled spring in the comp. Wondering if that puts the front sprocket out of alignment with the back sprocket? (IE: Stack height of front sprocket) I think you have the older style ramp from the 2016 models which is thicker that the M8s also. So yeah...would this make the front sprocket and chain out of alignment with the back sprocket. Cheers
@tricgix294921 күн бұрын
So no response to this?? Pretty sure it's going to be out of alignment....
@guzzifabrication34482 ай бұрын
wish mine was the latter style compensator instead of the 2008.... much easier fix.... thanks for the video !
@ryker412419 күн бұрын
I have a 2010 FLHTCU 96" and I get a quick squeak, just for a split second when I'm rolling down the road and let go of the throttle. It's coming from the compensator area. Suggestions?
@bobloblaw275423 күн бұрын
What's the best cam for a bone stock 2011 FLHTCUSE6 Ultra Glide???
@cholber14 ай бұрын
What kind of payments do you take?
@Chancho66Ай бұрын
How do I get one of these springs? Thanks
@KennyDavis-j1x14 күн бұрын
Do you have one for a 2007 Ultra classic and should I run ATF in it?
@keeprollin879015 күн бұрын
What mileage should the ATF be changed?
@michaelperry932310 күн бұрын
Can you do the same thing in a 96”?
@paologiorgini98212 ай бұрын
Buongiorno complimenti. Mi manda il link della molla. Grazie buona giornata
@paologiorgini98212 ай бұрын
Buongiorno ottimo lavoro. Mi puoi lasciare il link per la molla piccola. Quella che hai sostituito tu.grazie buona giornata
@ncautolink5 ай бұрын
Which compensator ramp are you running?
@LyleLarson-gp1xo5 ай бұрын
I use the ramp out of a 2016 Harley
@tricgix294921 күн бұрын
Hey there ..Great video. I was wondering since you put a thicker more beveled spring in the comp. Wondering if that puts the front sprocket out of alignment with the back sprocket? (IE: Stack height of front sprocket) I think you have the older style ramp from the 2016 models which is thicker that the M8s also. So yeah...would this make the front sprocket and chain out of alignment with the back sprocket. Cheers
@John-yf6iw5 ай бұрын
What is the part number for the compensator Spring?
@LyleLarson-gp1xo5 ай бұрын
It does not have a number. I manufacture it. It $50.00
@stephenreynolds16513 ай бұрын
How can I buy a spring.
@tricgix294921 күн бұрын
Hey there ..Great video. I was wondering since you put a thicker more beveled spring in the comp. Wondering if that puts the front sprocket out of alignment with the back sprocket? (IE: Stack height of front sprocket) I think you have the older style ramp from the 2016 models which is thicker that the M8s also. So yeah...would this make the front sprocket and chain out of alignment with the back sprocket. Cheers
@LyleLarson-gp1xo5 ай бұрын
There is no part number . I have it manufactured. They are $50 each
@aaronelsea77602 ай бұрын
How do I order one?
@lolospremiumfoodco.46812 ай бұрын
I'd like to order one please. Does the 2002 electra have the same set up?
@bid0088Ай бұрын
hi how can i order one for 21 sport glide, how much for shipping to Ireland, thanks
@tricgix294921 күн бұрын
Hey there ..Great video. I was wondering since you put a thicker more beveled spring in the comp. Wondering if that puts the front sprocket out of alignment with the back sprocket? (IE: Stack height of front sprocket) I think you have the older style ramp from the 2016 models which is thicker that the M8s also. So yeah...would this make the front sprocket and chain out of alignment with the back sprocket. Cheers
@Wolfsbane11526 күн бұрын
I need me one of them springs for my Compensator, tried all sorts of methods to stop rattling, it always comes back, could you send out one of those springs, I have an address in Oregon
@tricgix294921 күн бұрын
Hey there ..Great video. I was wondering since you put a thicker more beveled spring in the comp. Wondering if that puts the front sprocket out of alignment with the back sprocket? (IE: Stack height of front sprocket) I think you have the older style ramp from the 2016 models which is thicker that the M8s also. So yeah...would this make the front sprocket and chain out of alignment with the back sprocket. Cheers