CONVERT A SHOP VAC TO A PROFESSIONAL EXTRACTOR

Рет қаралды 366,329

2 жыл бұрын

Everything you need to convert your shop vac into a professional extractor. I have had my Ridgid portable Vac for a long time and have been asked this question a million times. Can you use a shop vac to extract carpet during auto detailing. The answer is yes kind of. In order to extract a carpet or interior fabrics effectively you need a water source to lightly spray the fabric while you vacuum it out. This water is sprayed in a precise area and amount based on the conditions. You need to be able to see what is being removed from the fabric through the clear viewing area on the extractor handle. This view tells you if the fabric still has either dirt or soap still in it and you can decide how much longer to continue in that spot. The attachment and the water spraying ability will make or break the process. I decided after watching a few videos and doing some research that it would be a great plan to convert my shop vac to have this ability. With the proper fittings and products your shop vac can be easily converted to a very usable auto detailing extractor or carpet spot cleaner. I have listed below all the parts and accessories that you will need to complete this project. This is a great auto detailing extractor kit that I like a lot. If you have any questions please feel free to ask in the comments. Thanks for watching and I hope you consider subscribing to my channel.
Check out my website for explanations & links to all the products. I made it easy to build this kit yourself with a full parts layout picture with links. www.hawaiidetailing.com/extra...
Here are the links to all the pieces on amazon: amzn.to/3A4Rebw
Here are individual links:
VACUUM:
Ridgid Portable Vac amzn.to/3LJJ4K6
Detailing Hose Kit (labeled as a 1.25" inside Diameter hose but is a 1.5" Outside Diameter) amzn.to/34LshpE or
Ridgid Portable Vac and Detailing Hose Combo amzn.to/3rYKTen
Ridgid Wet Filter amzn.to/3BtFOhk
1.5” Threaded x 1.5” slip on hose cuff (for a 1.5” Vac Hose) amzn.to/359j6z6
2” Threaded x 1.5” slip on hose cuff (for a 2” Vac Hose) amzn.to/3gXHwhC
Mytee Upholstery Tool (Commercial grade - 1.5" push fitting)
amzn.to/3LoAe3J
amzn.to/3ButddV
WATER HOSE & FITTINGS
Teflon Tape (3-5 wraps on threads) amzn.to/3I2RIkC
1/4 Quick Disconnect (connects 1/4' NPT water hose to extractor tool)
amzn.to/3v3JjtF
Air hose used to deliver water to the extractor.
Air Hose (with 1/4 NPT fittings) amzn.to/3GJQEnl
Air Hose Rubber Sleeves bit.ly/3MnKg68
3/4 Garden Hose fitting with 1/4 Female NPT (connects garden hose bib to 1/4" NPT hose)
amzn.to/3gS4sPk
EXTRACTING SUPPLIES
Carpet Cleaning Chemical amzn.to/3gY10Th
Measuring Cup amzn.to/3H1k3GS
Chemical Sprayer amzn.to/3I2XvqB
Battery Drill amzn.to/3BvL6ci
Drill Brush (White Soft) amzn.to/3I3R1I0
All Purpose Micro Fiber Towels (High Quality) amzn.to/36pr1ZI
ALTERNATIVE EXTRACTION MACHINES
Entry Level:
Bissell Spot Clean Pro amzn.to/3I1Cdti
My Bissell video • BISSELL SPOTCLEAN PRO ...
Semi Pro:
Mytee Spot Cleaner amzn.to/3BAejm9
Pro:
Mytee 4 gallon 130" water lift heated amzn.to/3rXAIqy
Mytee 10 gallon 130" water lift heated amzn.to/3JHhawr
MY AMAZON EXTRACTOR PRODUCTS a.co/gmxlphJ
GARAGE WALL SHELF a.co/7jFjrWQ
MY FAVORITE AMAZON PRODUCTS www.amazon.com/shop/hawaiites...
Disclaimer** I did not invent this method. I took previous known methods and made improvements where I could to simplify and make it easy for everyone to make their own kit.
SUBSCRIBE / @hawaiidetailing
KZfaq / @hawaiidetailing
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiitesladetailing
TIKTOK / hawaiitesladetailing
PLAYLISTS
PRESSURE WASHER • CUSTOM PRESSURE WASHER...
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
TESLA CARE • TESLA Care
TESLA • TESLA
GRILL • Grill Videos
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.

Пікірлер: 767

@HawaiiDetailing Жыл бұрын

Here are all the parts and pieces. Thanks. www.amazon.com/shop/hawaiitesladetailing/list/1XD2ELP60DECJ?ref_=aipsflist_aipsfhawaiitesladetailing Subscribe and you will be lucky for a year.

@josepharobinson5901 Жыл бұрын

💯💯💯🙏🏼🙏🏼🔥⭐️

@gm08351 Жыл бұрын

you are a real professional

@eduardohernandez5618 4 ай бұрын

Today I discovered your channel, it's great

@drivenautomotivedetailingl2827 2 жыл бұрын

If Tony hawk had a twin brother and he detailed cars… love this guy

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@yunggloboxing4718 Жыл бұрын

Why is that so true 😂🤙🏽

@sanfranatic1 11 ай бұрын

😂

@JM-oy5yv 11 ай бұрын

He stole his brothers shirt 😂

@MrBigfatidiot 4 ай бұрын

Damn saw the comment before the video…couldn’t be more ture

@JUDGEME5150 2 жыл бұрын

The fact that your just helping us save money makes you a special person man. I hope you realize that. I hope you get good karma for this. I just subscribed hoping one day I see your name with a millions plus subscribers. People like you is what this world needs.

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@jackww839 2 жыл бұрын

I love that you are always looking out for everyone, from to weekend warriors to the pros.❤️

@HawaiiDetailing 2 жыл бұрын

I am Glad you like the channel. Thanks

@minkuya 2 жыл бұрын

Aloha! Just bought the Mytee Air Lite and fittings using the links provided. Already have a spare Ridgid vacuum, Ridgid auto detailing hose kit, etc. No brainer to make this happen. You've got the most creative and most fun to watch auto detailing channel right now. Wishing you the best in 2022, brahddah!

@HawaiiDetailing 2 жыл бұрын

Thanks man. I appreciate it. You will like it. It’s high quality. I am glad you enjoy the channel.

@Snarfimus 2 жыл бұрын

Thanks for your videos, I dove into my own detailing business because of you and a few other detailers on KZfaq. You guys are educational and give the best tips, so thank you very much!

@HawaiiDetailing Жыл бұрын

Thanks a lot. I appreciate it

@emagee7864 Жыл бұрын

Thanks for putting out content that is right up my alley. Your information, links, and parts list are really complete. Good work.

@HawaiiDetailing Жыл бұрын

Thanks. I appreciate it.

@patrickzepeda5576 Жыл бұрын

Your shop space is so nice! Love the conversion! Great work !!!

@HawaiiDetailing Жыл бұрын

Thanks

@216baja 2 жыл бұрын

Always great content! This is a wonderful solution if someone doesn’t have an extractor.

@HawaiiDetailing 2 жыл бұрын

I enjoy this kit. It works well. Thanks

@georgef1176 2 жыл бұрын

This is just as good as my bissel proheat liftoff. I’m super impressed. Good video brother!

@HawaiiDetailing 2 жыл бұрын

Thanks.

@rhsab1 2 жыл бұрын

What a great job making this video and listing all the material and details. Enjoyed watching. Thank you!

@HawaiiDetailing 2 жыл бұрын

Glad you enjoyed it! Thanks for watching

@undividedattention Жыл бұрын

Can just tell you're a super cool dude. Thanks for the awesomely executed video! I have the same vac that I've had for about the same amount of time and I'm seriously considering doing this now.

@HawaiiDetailing Жыл бұрын

Thanks a lot. Glad you enjoy the channel

@jonathonsalazar3920 2 жыл бұрын

Amazing video, everything explained to perfection. I will be doing this very soon 🙏🏼

@HawaiiDetailing 2 жыл бұрын

Thanks a lot.

@craigord 2 жыл бұрын

Great video 👍🏻 You’ve got a real respect for your kit that is refreshing to see on video!

@HawaiiDetailing 2 жыл бұрын

Thank you.

@Amxracer Жыл бұрын

The best video on this subject and information I have seen yet ! Thanks

@HawaiiDetailing Жыл бұрын

Thanks a lot. I appreciate it

@viperrcr 2 жыл бұрын

This is a great idea and not very expensive solution for people! Thank you!

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@shaukathameen2808 Жыл бұрын

Gosh! You could easily have been a university lecturer. So easy on the ears.

@HawaiiDetailing Жыл бұрын

Thanks.

@kevinstill1 8 ай бұрын

That worked very well. I like it. I wouldn't mind building it one day.

@cynthiaenglish2736 2 жыл бұрын

You put tremendous effort & thought to organizing this video. Maximum creativity and great execution! I’m gonna stick to my extractor though cause I still need my Rigid.

@HawaiiDetailing 2 жыл бұрын

Thanks. I really appreciate it.

@MagicMikesDetailing Жыл бұрын

Perfect for what I’m looking for to do future detailing

@benjaminerrico6760 Жыл бұрын

This is beautiful. You explained it so simply. Can’t wait to mod my wet vac. Thank you!!!

@HawaiiDetailing Жыл бұрын

Thanks for watching

@PolishedMobileDetailing503 2 жыл бұрын

Thanks for taking the time to make the video. I will be using this setup in the future.

@HawaiiDetailing 2 жыл бұрын

Thanks for watching.

@FOXXHOUND86 9 ай бұрын

Dude you seem like you would be an awesome mentor at anything you do and talk about thank you for your time

@HawaiiDetailing 9 ай бұрын

Thank you. I appreciate it. That means a lot.

@adriancano380 2 жыл бұрын

I’ve been watching videos about extractor and I just don’t watch the whole videos but you explaine everything really good and got me watch the whole video and the set up is great thank you

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@MatthewHurtado 2 жыл бұрын

Wow that worked great, nice suction. Great video Jeremy. Keep them comin!

@HawaiiDetailing 2 жыл бұрын

Yeah buddy. Thanks a lot.

@emilepmartin 2 жыл бұрын

Exactly what I was looking for Jeremy...awesome job once again bringing the content we need to get professional results ourselves. BTW...joining the Tesla family today picking up my White on White Model Y Performance in a few hours...woohoo!

@HawaiiDetailing 2 жыл бұрын

Nice. They are great cars. Thanks for watching

@yourstruly3214 Жыл бұрын

Great instructions. I was able to follow it just fine using the 1.5 hose on my craftsman shop vac. This has some crazy strong suction. I use the hot water on my washing machine'shookup for hot water.

@HawaiiDetailing Жыл бұрын

Good to hear. Thanks for watching

@mann8254 2 жыл бұрын

Great video Jeremy, never thought it to be possible but now I see it is, great idea, thanks Jeremy 👌

@HawaiiDetailing 2 жыл бұрын

I actually like this kit a lot. Thanks for watching

@DJayH34TB34TZ 2 жыл бұрын

I’d love more content with this rig, just found your channel, 🙏🏽 thank you for the content and your time

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@adriyanmusic 2 ай бұрын

That's the way man! Most of guys are over working and it's a never ending In this video you are doing it right :)

@HawaiiDetailing 2 ай бұрын

Thanks.

@eltony69 2 жыл бұрын

Your videos are the best your explain everything step by step and super clear

@HawaiiDetailing 2 жыл бұрын

Thanks. Glad you enjoy them.

@nealwagner8548 3 ай бұрын

Thank you for this video and for all the links, it was so helpful for me!

@HawaiiDetailing 3 ай бұрын

I just updated my website to make it super easy. www.hawaiidetailing.com/extractor Glad it was helpful!

@ddautodetailing 2 жыл бұрын

Excellent! Thanks for taking the time to share this. Definitely something I'm interested in 👍

@HawaiiDetailing 2 жыл бұрын

It’s a cool rig. Thanks for watching

@RobertWilliams-vm6bi Жыл бұрын

Your videos are always informative and sometimes funny. I agree this is an inexpensive workaround but unless you have it attached to hot water, I prefer steam.

@bingaman 2 жыл бұрын

I love that you painted the shop vac

@HawaiiDetailing 2 жыл бұрын

Got to make it match. Thanks for watching

@DubThaDetailer 4 ай бұрын

I love this channel. Its like watching your weed smoking uncle who is really awesome at detailing cars.

@HawaiiDetailing 4 ай бұрын

Hahahaha.

@nunyabusiness3786 Жыл бұрын

You are a genius! I never considered using an air hose

@streetfighters805 2 жыл бұрын

Amazing to watch.. Thank you very much for teaching me something new...

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@nicokasper8461 2 жыл бұрын

Good stuff man. Just shared it on the obsessed garage group for everyone to see!

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@SlotDropMarc Жыл бұрын

You turned me on to Carpet Bomber, and this stuff is awesome. Plus I made this carpet extractor and it works like a charm. Thanks my man!!!!

@HawaiiDetailing Жыл бұрын

Great to hear. Thanks

@beerme_2 2 жыл бұрын

Enjoyed the video. You put a lot of effort into your channel. Thanks for that effort. From video shooting, editing demo of the product to all of the links in your description. Kudos on the cool project. Costs adds up on repurposing a shop vac.. I have been considering an extractor. I am a detail hobbyist and had been leaning toward the Bissel spot clean pet pro portable carpet cleaner.. Stay Safe!

@cynthiaenglish2736 2 жыл бұрын

Me too. I can’t afford to give up my Rigid.

@HawaiiDetailing 2 жыл бұрын

Yeah. That’s a good one too. Thank you for following the channel. I appreciate it

@richsmith9063 10 ай бұрын

GREAT Video. You are an EXCELLENT presenter / content creater !!!!

@HawaiiDetailing 10 ай бұрын

Thanks a lot.

@2minniegirl Ай бұрын

Wow that suction is amazing and powerful

@HawaiiDetailing Ай бұрын

It works well for sure

@no_lft_shft 2 жыл бұрын

Ok I've watched enough videos. I now love this channel.

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@RaldasDetails 2 жыл бұрын

Brother you always doing the best videos out there!! 😎👍🏼

@HawaiiDetailing 2 жыл бұрын

Thanks Tony. I appreciate it

@donkeydiehard879 2 жыл бұрын

I love this setup. On tough jobs I had an issue not being able to use hot water though. So I found a cheap easy solution. I used a weed sprayer but any container that holds water and pressure will work. I didn't want to pump the bottle for pressure all the time. I Installed a shrader valve with male threads to the bottle and secured it with a washer, nut and rtv to seal. Hooked up my $50 Ryobi tire inflator that kicks on and off at desired psi and it works like a dream.🙌 Cold water is good for most jobs but is nice to have the option for hot water when needed.

@HawaiiDetailing 2 жыл бұрын

Great idea. Thanks for sharing

@kabelboy1able 2 жыл бұрын

Put your quick video out

@HawaiiDetailing 2 жыл бұрын

@@kabelboy1able hook up the water inlet hose to a hot water tap. Wash sink, hot water heater hose bib etc. That’s what I do. If you need a constant source of extremely hot water this system might not be the best option. I can make a quick video showing this for sure. Thanks and I hope that helps.

@kabelboy1able 2 жыл бұрын

@@HawaiiDetailing yea can u make a quick video. I appreciate it man

@MrSpeed396 2 жыл бұрын

I built one thanks to you! It works great Thank you, I wish I could post a picture.

@HawaiiDetailing 2 жыл бұрын

Great to hear. Thanks for sharing

@angelnieves6087 2 жыл бұрын

Excellent idea. Great job abs thank you for the tip

@HawaiiDetailing 2 жыл бұрын

Thanks.

@jrtama5 Жыл бұрын

My dude! You probably just saved me thousands of dollars 🤘 I'm a house cleaner that just started getting into very low moisture VLM carpet cleaning and floor cleaning, I think a rig like this would work perfect as I run my business out of my Prius. I have a carpet cleaning friend that told me about getting a six horsepower Plus shop vac for extraction on tile and grout and other applications for carpet and upholstery cleaning etc, apparently that has enough suction to make everything happen so a set up like this in addition to that would be perfect! Totally portable to compared to the professional "portable" extractors. I know they have separate water heating units as well so I could totally add one of those on in the future as well, but for now something like this would be totally good for rinsing and extraction 🦾 thanks!!

@J1Z06 2 жыл бұрын

This is clever! Your brain never stops! We definitely benefit. Thank You for all Your hard work! I love this channel. Keep the great content coming!

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it. Glad you enjoy the vids.

@J1Z06 2 жыл бұрын

@@HawaiiDetailing Yes indeed!!

@cesarmecinas2600 2 жыл бұрын

I have the same setup but air hose in a Cox reel connected to my 12v pump work like a champ. Love the color on the ridget

@HawaiiDetailing 2 жыл бұрын

Nice. Thanks for watching

@jttiptopdetailing3996 3 ай бұрын

Wow, so glad I found your video! Awesome explanation & showing it working. I'm ordering from the links you provided & I can't thank you enough. I'm mobile & this will be perfect for my set up!

@HawaiiDetailing 3 ай бұрын

Thanks. I appreciate it. It’s a good rig.

@emmayarde Жыл бұрын

Maaaane! You sold me that thing 🤣 didn’t need to see more i hopped to the home depot app and bought it. Thanks!

@HawaiiDetailing Жыл бұрын

Thanks for watching

@jackww839 2 жыл бұрын

You are an absolute legend my friend!

@HawaiiDetailing 2 жыл бұрын

Thank you.

@regisfunatsu 2 жыл бұрын

Maaaan... You saved me a bucket of dollars. I was about to buy the Bissell, then your video show up. Great video BTW!

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@joevanseeters2873 2 жыл бұрын

Whoa! That modification on that RIGID did an amazing job! It would be cool if RIGID actually offered that exact same set up as an already made piece that you just bought and hooked up! YEAH........................!!!!!

@HawaiiDetailing 2 жыл бұрын

Yes. It would be a good add on. I guess we just have to make our own. Thanks for watching

@cebasmb8250 2 жыл бұрын

Great job as always Jeremy 👌🏽💯 i have one setup in my van but on a portable gas water heater....man it's bad ass and with hot 🔥 water......great job man

@HawaiiDetailing 2 жыл бұрын

Cool deal. Thanks for watching

@Vladviking 8 ай бұрын

That hose bib water hook up made me rethink this as I was looking at a full fledged "home" extractor thinking I would need a pump and tank. I got shop vacs out the yang. Hosing is kind of "thick" and hard to maneuver I would think over the regular bissel type. Thanks

@MikeyMack303 Жыл бұрын

Really nice setup. thank you.

@HawaiiDetailing Жыл бұрын

Thanks.

@mikegentzke6424 Жыл бұрын

I love the idea of converting my Shop Vac into a shampooer / extractor. The thing I like the most is both of my shop vacs are over 20 years old and I can transfer it to another when / if it breaks. I have been using an IK sprayer to spray the carpet with carpet bomber and water in a spray bottle to rinse the carpet. It works but is definitely slower.

@HawaiiDetailing Жыл бұрын

Works really well. Larger storage footprint but better quality.

@HawaiiDetailing 2 жыл бұрын

Seems like they go out of stock quick but here is a link that has a few amzn.to/3tM3Ou2. Thanks for watching and supporting the channel.

@winner1604 5 ай бұрын

Great video, fantastic, thank you

@HawaiiDetailing 5 ай бұрын

Glad you enjoyed it

@cm517chris 2 жыл бұрын

Wow, that's actually really amazing what ya did! Heck yeah man 👊 😎 Have a good one 💯

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. Thanks for watching

@greenbackfunding418 Жыл бұрын

Dude, I like what you have done with your pressure washer set up, never thought of a mounted hose reel! Nice!

@HawaiiDetailing Жыл бұрын

Yeah man. Thanks. I did not invent this setup but I customized it with parts and pieces to meet my needs.

@mikebridgeline3275 2 жыл бұрын

Love all your videos. Thank you. Smart fellow. 👍🇺🇲

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@kenwoods9178 2 жыл бұрын

This was a great video…not an overhyped solution… I think I am going to make one!

@HawaiiDetailing 2 жыл бұрын

It’s a great kit. Thanks for watching

@JG-gh4xj 2 жыл бұрын

awesome video, and you remember to say "YEEEAAAHHH" at the end.

@HawaiiDetailing 2 жыл бұрын

Of course. Sometimes I forget. Thanks for watching

@nomad509 2 жыл бұрын

Dang it man, this is a freaking sweet custom setup that I may have to try out! I've never been able to stomach the cost of a Myee even though I love commercial grade tools. Thanks for sharing!

@HawaiiDetailing 2 жыл бұрын

It’s a good setup. Thanks for watching

@Slim.Calhoun Жыл бұрын

Just stocked my Amazon cart. Can't wait.

@HawaiiDetailing Жыл бұрын

It’s a good kit. I like it a lot. Thanks for watching

@DetailingBreakdown 2 жыл бұрын

Good clean well thought out video! I predict millions of views.

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@josemejia6645 Жыл бұрын

What an awesome unbiased video! Thanks for your time in putting it all together. I’ve been wanting to get my vehicles detailed and got burned by on one already to the point I’m pushing myself to do it. What do you think about steam vs water extraction? Is heat better than cold tap water?

@HawaiiDetailing Жыл бұрын

This is a cool kit. You will like it. I hook mine to a hot water spigot. Works great. I like extracting fabric as my goto for dirty seats and carpet. Thanks for watching

@MrPeeteboy Жыл бұрын

@@HawaiiDetailing what do you mean I like extracting fabric as my go-to?

@jenniferray7972 9 ай бұрын

Awesome explanation!

@HawaiiDetailing 9 ай бұрын

Thanks. I appreciate it

@ed78vette 2 жыл бұрын

Outstanding presentation! Mahalo.

@HawaiiDetailing 2 жыл бұрын

Thanks a lot. I appreciate it

@HussCapital 3 ай бұрын

Great video thanks for the information. Gonna build one myself! You gained a subscriber. Thanks again

@HawaiiDetailing 3 ай бұрын

Thanks for the sub!

@blakethomas2249 Жыл бұрын

Great video, and you should be flattered at how many folks have ripped your video off. Screw them though, yours is still the best.

@HawaiiDetailing Жыл бұрын

Thanks. I appreciate it.

@LotusDetail77 2 жыл бұрын

So Awesome! I wish I saw something like this a long time ago. I made due with a jank setup before buying the bissell pro, Having use the Bissell spot pro for two years I got sick of it. It sucks, yes it does the job but man its rough. I just bought the aqua pro vac and it is sweet, that aside I would take doing this over the bissell pro any day. What is even cool with this is you can buy a second vac hose and easy swap from vac to extract or to work more cleanly just get a 2nd rigid vac and you are golden! Great content! p.s. the hart 3n1 isn't to shabby either.

@HawaiiDetailing 2 жыл бұрын

Thanks for the info. Thanks for watching

@veesoho93 Жыл бұрын

Amazing video thank you so much

@HawaiiDetailing Жыл бұрын

Glad you liked it!

@TheKarma2003 Жыл бұрын

Excelente video 👍🏽

@russellesquivel-barker2270 Жыл бұрын

Hey Jeremy I didn’t realize you only posted this video 7 months ago but coincidentally this was around the same exact time I was looking into building one of these DIY extractors. I literally followed your video detail by detail and used your links to order all the stuff from Amazon. I appreciate everything you did to help make this possible! So I did get my extractor going and used it multiple times. However, I just went to use it again right now and I am not getting any water into the air hose it seems like. I tried two different extractor heads. I unscrewed the fittings I previously screwed onto the water line/air hose. I cannot figure out why I am not getting water into my extractor head. When I pull the trigger no water is coming out. It’s worked great in the past when I’ve used it. I literally cannot think why I am not getting water into the line or the extractor head. Also, I am using a garden hose as a water supply like you are in the video. I even tried it on two different hoses. What do you think is wrong here? Thank you!!!

@HawaiiDetailing Жыл бұрын

I would trace the water flow from the spigot through each fitting to see where the water is being restricted. Separate the fittings as needed to identify where the water stops. There must be a clog or something that is causing this as the water should flow through with no issue. After you figure that out it will be an easy fix. Thanks for watching

@russellesquivel-barker2270 Жыл бұрын

@@HawaiiDetailing okay yeah Im pretty sure I found it. It’s being restricted in the fitting that connects to the extractor head. Don’t know how or why but probably just going to order a new one. Thanks!

@robertm1692 Жыл бұрын

@@russellesquivel-barker2270 I was going to suggest you look at the quick disconnect fittings. They are closed when separated and it's possible contaminants got into the fittings. Put a canister style water filter on the spigot then connect your hose to the filter to keep hard water mineral deposits out of the hose.

@charlesking5312 Жыл бұрын

This is awesome setup! Thanks

@billbo2117 2 жыл бұрын

So cool Jeremy great video 😎🖒

@HawaiiDetailing 2 жыл бұрын

Thank you.

@jvb24404 Жыл бұрын

Damn!!! You’re a genius men… 👍

@HawaiiDetailing Жыл бұрын

I wish. I put together parts for my kit from research I did as well as tips and tricks I learn from others out there rigging things up. Then I share it all with you guys. Thanks for watching

@Star88701 Жыл бұрын

Love this guy, sounds just like the guy in happy Gilmore. "Harness the energy. Rise above it. All good things"

@HawaiiDetailing Жыл бұрын

Thanks.

@Star88701 Жыл бұрын

@Hawaii Detailing I hope my comment didn't come off as snarky or rude, I was being honest and it reminded me of that happy Gilmore scene.

@csmurff 2 жыл бұрын

Love the idea, I’m definitely gonna use the hose sock though, that would look way more aesthetically pleasing! Gonna take it a step further though, hear me out! Get a fitting to connect the end of your kobrajet hose to draw your water feed from. You can simply turn the water on to your pressure washer wall install and then leave the pressure washer in the off position. So you can get standard water pressure and not have to tap the garden hose! Then you can trim down the long air hose to make the whole unit easier to store away etc. Just pull it out, plug in power, take the pressure washer gun off and plug your hose into the extractor and off ya go! I just need to find an adapter to go from 1/4 to 3/8 so we can adapt the extractor hose to the pressure washer hose. 🤙🏼

@HawaiiDetailing 2 жыл бұрын

Good idea for sure. Let me know how it goes. Thanks for watching

@emersonjordan6677 2 жыл бұрын

Any update on the adapters 1/4 to 3/8 ?

@danielshallberg9266 2 жыл бұрын

U ever find that adapter?

@alirazmjou2149 2 жыл бұрын

Thank you so much for this video سپاسگزارم

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@diamonddetails9445 Жыл бұрын

Genius 👀💯👍 TYVM BOSS

@aarontyrrell2931 2 жыл бұрын

Nice video! Looked good to me.

@HawaiiDetailing 2 жыл бұрын

Thanks

@brian_s3castro305 4 ай бұрын

i love everything about your videos ! thanks boss have the same shop vac atm ha

@brian_s3castro305 4 ай бұрын

just debating if i wanna add this attachment even tho i do have a hydrosteam bissel

@HawaiiDetailing 4 ай бұрын

Thanks. I appreciate it.

@derellscott6695 6 ай бұрын

Omg im going to build this ,and am going to add the heat saber wand booster so i can have heat when im cleaning, thanks so much for this awesome video Hawaii Detailing!

@HawaiiDetailing 5 ай бұрын

Thanks for watching

@sabrina6499 2 жыл бұрын

Wow this was great!

@HawaiiDetailing 2 жыл бұрын

Thank you.

@MarkSegree 9 ай бұрын

Amazing. Now I gotta call the plumber so I can hook it up directly to the hotwater and don't have to wait for professional extractor to heat up

@dustincandia7215 2 жыл бұрын

Amazing video!

@HawaiiDetailing 2 жыл бұрын

Thanks a lot

@fredpenner5667 2 жыл бұрын

Awesome video. I took an auto detailing class and they didn't use any chemicals for cleaning fabric, only steam.

@HawaiiDetailing 2 жыл бұрын

That works too. It depends on how hammered the fabric is. I use a chemical almost every time. Makes it easier and gets great results. Thanks for watching

@brianstankavage1595 2 жыл бұрын

Thanks for the tips🙂

@HawaiiDetailing 2 жыл бұрын

Thank you.

@karabinas 9 ай бұрын

Awe Jeremy! The drill brush does ALL the heavy lifting!!

@HawaiiDetailing 9 ай бұрын

Yea it does. The extractor just sucks the already agitated dirt out. Thanks for watching

@grayparagon4164 9 ай бұрын

Yeah I instantly subscribed cause of just HIM! Hahaha cool voice and style man, in just the industry I need to not fall asleep learning about.

@HawaiiDetailing 9 ай бұрын

Thanks

@ThiqRiq 9 ай бұрын

Thank you brother!

@HawaiiDetailing 9 ай бұрын

You bet. Thanks for watching.

@jasoncraig6158 2 жыл бұрын

Great video. I wish I would have seen something like this a year ago when I bought my Sandia. It works great but just don’t use it as much as I thought I would. The shop vac option would of been plenty!!!

@HawaiiDetailing 2 жыл бұрын

Thanks for watching