Watching on side of the road in middle of night with that fitting on hose assembly leaking- it is cracked. Thank God towing is $450 bucks back home and God gave me mind to look stuff up on KZfaq Thank you!

Thanks for your video, was the best I found to follow on my 2005 Tahoe. Took me a little over an hour to complete. Looking at your video again, I see that the hose to my fluid tank is not pushed on as far as yours, so I better redo that part (it's really hard to push that one on for some reason). Everything else went smooth, and my truck is no longer leaking fluid.

Awesome video, the Y piece just failed on my 2005 silverado 10 minutes ago, this video will help me to put it back to work quick. Keep up the good work

I have an 07 Escalade and I need to replace the exact same piece. U made it look easy, thanks

Good job dude! This video helped a lot. My hose just started leaking this morning and now I need to replace it.

u really helping us !!!!! i have a similiar vehicle and did exactly what u did and with this video my job was very easy to do. thanks alot ! god bless u 🙏🏼

I bought the 60 dollar option from O'Reilly's and it allows for a easy splice into the old QC on my '05 silverrobbo , those older version Quick Connect aren't the easy quick disconnect like in this video, they were a time saver on the GM assembly line, but to remove them is another story, the passenger side one can be hell to remove since there's barely enough room to get the removal tool in place and then getting my fingers to do what is supposed to be done is damn near impossible, the updated QC's are better for removal.

FYI, There's a really cool tool to remove those particular clamps. Don't ask me the name bc I can't remember. The hobby shop on base had them. I used them and afterwards I went to Sears and bought it. It really helps to clamp down and it locks in place.

Just did this on cammed 5.3 Silverado thanks for help man at first I bought the wrong part went back to the auto shop picked up a new hose my shit was leaking bad. Just a heads up DRAIN YOUR RADIATOR BEFORE OUR IT WILL EXPLODE OUT AND BIG MESS

Thank you buddy! Great video! About to put this on my 2004 Tahoe.

Thanks brother great video saved me some money and a headache

Brooooo Thank You So Much For Making This Video,You Saved Me So Much Time And Energy….💪🏿💪🏿💪🏿💪🏿💪🏿

Really helpful thanks for taking the time to record 👍👍

oil change placed tried to rip me off, 289 fit fix for a 10 minute job , thanks for vid

I never would of thought about putting cardboard down to absorb the coolant

You doing very good job 👍👍 👍👍 Nice video 👌 👌👌👌 Good teaching 👍👍 👍 👍 Thank you so much for

Thanks, I was pressing on those tabs no wonder it would come out

That video helps me a lot dude thx 🙏🏼

Thanks for your video it really helped

Thank man my “Y” just started leaking and this video helped out a lot. Curious why you don’t use the original hose clamps?

Thanks soooo much! This is the only video that shows the “Y” instead of the connecter to the firewall. I’m gonna be doing this myself, do you recommend taking off any parts to make it easy to get to?

Thank you!

Thank you. I needed this video You're awesome.

Thanks a lot man it was very helpful..

Very helpful, thanks.

Awesome video! I do have a question, my Y fitting seems to have a leak and I have a 2008 gmc Yukon XL with rear air. Will this part work?? Thanks!!

Wondering… Why weren’t the clamps reused? Also Cap was replaced during warm up preventing air to escape…(?) I replaced the other hose , Month or so later replaced the water pump, & thermostat Now it’s 4am a few weeks later and now I have to replace this hose( leaking at the y) Knew I should’ve replaced at least both hoses at the same time New I should’ve replaced this hose when I replaced the water pump 2014 esv

Thanks very helpful 👍

Big help. Thanks a lot!!

What is the hose part number for the hose to the left? I have to replace is.. Thanks in advance

Man thank you a lot!! Just did mine my only question is that how much coolant I should add after replacing the hoses??

that is really helpful!

Great video thanks

Great video. Thanks.

Way easier if u take off intake cowl

Appreciate this, needed it

Thank you.

question...on the new hose it has 3 clamps on the connector piece to all 3 hoses...thats the piece that broke on my truck, can i just replace that connector piece instead of replacing the entire unit? Thats how my truck is set up...i have 3 clamps there whereas on your original piece there are no clamps

How do you figure out if the hose assembly is for auxiliary heat or without? Both assemblies look the same and really I just need the y fitting but can only find it in the assembly.

Do you have a video replacing the back low pressure heat and ac rubber line

I'm from Michigan are plastic squeeze connectors need wrenches and oil

Thanks bro

Can you use the same hose? How do I remove the black part from the hose? Brake it ?

Great video , where was it leaking from

If theres a leak in any of those two hoses will cause over heating?

Quick bit of info. Trany fluid is sweet and some cats will lick it up if they get the chance. Sadly fatal most of the time. I see this guys is being careful.

You could of just used the old clamps instead of them screw tight clamps but great video

I have a 2006 Yukon will this with auxiliary. Will this part number work. Everything seems the same except it starts for 2007

Question, where was it leaking from?

Can I apply this part number hose in the video to my 2002 yukon ?

👍

If the plastic Y fitting near the water pump fails, do you have to buy this whole hose assembly?

Why not just use the old clamps they seemed to be serviceable

Tripode

Part numbers

Mines not leaking fluid but still overheating wtf 😆

Ever heard of a bucket🤦‍♂️

Awesome video! I do have a question, my Y fitting seems to have a leak and I have a 2008 gmc Yukon XL with rear air. Will this part work?? Thanks!!