Heavy Duty Welding Table Attachment for a Big Vise

Рет қаралды 222,205

2 жыл бұрын

If you watched my recent videos you know I just bought a welding table and also just restored a very substantial old vise. To bring the two together, I decided to weld up this heavy duty "shelf" that attaches to the side of the welding table, which allows me to mount the vise without sacrificing any of the work surface. It's made from 12mm mild steel plates and custom nuts that engage in the tables hole system. This build gave my TIG Welder a serious workout, running the maximum of 200 amps most of the time!
🔧 LINK LIST for tools I use in my videos:
hero.page/philvandelay/my-fav...
---
VIDEOS
🎥 Belt Grinder Build Video + Plans: • Building a Machinists ...
🎥 Welding Table Demonstration Video: • I bought a 2000lbs Pre...
🎥 Vise Restoration Video: • Huge Rusty Vise - Rest...
---
LINKS
👕 SHIRTS / Merch Store: phil-vandelay.creator-spring....
🙏🏻 Patreon: / philvandelay
☕️ Ko-Fi / Donations: ko-fi.com/philvandelay
📷 Instagram: / phil_vandelay
📐 Plans for my Projects on Etsy: www.etsy.com/shop/PhilVandelay

Пікірлер: 135

@batzlat1 Жыл бұрын

This freackin' belt grinder man, it is so good!

@Belvedli 2 жыл бұрын

Every time I see the welding table I feel you are just showing off. You have some really nice equipment and I am starting to get jealous! 👌😂 Nice work on the bracket!

@santomuro 2 жыл бұрын

Beautiful vice! I’m jealous. Great fab work too, super clean

@kenthesparky178 2 жыл бұрын

A lovely bit of engineering that will see you through your entire life.

@CraigsWorkshop 2 жыл бұрын

Excellent work. Love that table. Love that vise, and love the new bracket for it. Keep up the good work

@davidyates748 2 жыл бұрын

That was oddly therapeutic. Nice work!

@samb8414 Жыл бұрын

This was masterfully produced, both in product and video!!! Thank you so much!

@tomwagemans1872 2 жыл бұрын

Nice first project for your new welding table!

@mounir101 2 жыл бұрын

Thanks. Phil. You made a pretty awesome vice base actually!

@jimalessandra5908 8 ай бұрын

One of the best videos I've seen. The skill and craftsmanship are unbelievable! Very satisfying to watch!

@JROh-uu9fj 2 жыл бұрын

You are transforming enineering into an art. Would like to express my sincere gratitude to you. Please keep up your work.

@dsmasynergy 2 жыл бұрын

The extra attention to detail you do, where it is not needed, is a sign of a true craftsman! (Im referring to chamfering the base plate)

@massimopreda6367 2 жыл бұрын

Few words fantastic job compliments for the order and cleanliness

@jwdickinson643 2 жыл бұрын

excellent design, exellent execution, excellent result!

@markwatters6875 2 жыл бұрын

Top job mate, well done.

@kirabogavin8846 2 жыл бұрын

Now am certain you took long to post this one because you wanted it to super amazing, very clean job. Thanks

@baligaal252 2 жыл бұрын

Congratulations for the table! It's a really nice stuff. Nice work by the way and nice vise. greetings from Hungary.

@leobrent7926 2 жыл бұрын

Amazing work.

@billjohnson5793 2 жыл бұрын

Nicely done sir!

@kreasiumum 2 жыл бұрын

There's always an idea, it's amazing.

@drpipe 2 жыл бұрын

Nice work, kinda liked the chamfer on the belt as a quick way to do it 💪

@cofixit 8 ай бұрын

In case no one mentioned it yet: The elevator music for the merch interlude is a very nice touch!!

@yeagerxp 2 жыл бұрын

Excellent work👍👍👍. Thanks for sharing

@elrayox8932 2 жыл бұрын

You’ve made some Really nice-really complicated stuff and, somehow, this is so simple and it’s one of my favorites.

@PhilVandelay 2 жыл бұрын

Haha, I know what you mean. Something about it is just oddly satisfying, had the same feeling when making it

@hungryanimal5112 2 жыл бұрын

That is an awesome vise!

@luisgear3288 2 жыл бұрын

AMAZING!!!

@warrenmaker798 5 ай бұрын

Show Off, LOL,, I have vice envy now. Great job.

@trollforge 2 жыл бұрын

That, is a thing of beauty!

@matthewmoilanen787 8 ай бұрын

Phil that sander of yours works just awesome doesn't it! Well done on that build and nice job on this vise mount as well. You do damn fine work buddy!!!

@DanKoning777 2 жыл бұрын

*Well done.*

@624Dudley 2 жыл бұрын

Blast it, Phil, now I’ve got vise/mount/bench envy.

@patrickmccafferty7183 2 жыл бұрын

This was a highly religious experience. Outstanding craftsmanship.

@ahmatophotography 2 жыл бұрын

Great and very creative job habibi !!!! Love it 👍💪

@ivanmargetic2724 2 жыл бұрын

Epic work! Nicely done :D

@lapierretube1735 2 жыл бұрын

Nice work 👍👍👍

@jtg2737 2 жыл бұрын

Super nice!

@tiammax 2 жыл бұрын

Nice job

@esological 2 жыл бұрын

He’s back! glad to see you dog

@williamchagas9710 2 жыл бұрын

Quando se tem ferramentas ,aí é outro nível

@mftmachining 2 жыл бұрын

Erstklassige Arbeit. Das Torx-shirt ist echt der Knaller. :--)

@homemadetools 2 жыл бұрын

Nice vise shelf. We shared this video in our homemade tools forum this week :)

@PhilVandelay 2 жыл бұрын

Ah maybe that's where the external views came from 😊

@homemadetools 2 жыл бұрын

@@PhilVandelay Happy to help; you have a great channel. Feel free to email me at "jon" at our url, and I'll send you a coupon code so you can join our forum for free and post your videos whenever you want. We have lots of YTers on board.

@user-md2ff2vv4j 2 жыл бұрын

Отличная работа !

@jaimeandrade9973 2 жыл бұрын

Indiscutible muchísimo mejor que dentro de la mesa. Felicitaciones.

@PatonHaus 2 жыл бұрын

Hi Phil, great video, that table is an absolute work of art! I wanted to let you know that the links in your description for the belt grinder and vise are mixed up. All the best.

@PhilVandelay 2 жыл бұрын

Ah thanks for the info! I'll fix it

@hamish7759 2 жыл бұрын

You could add a hand lever /wheel to the nut that controls the roatation so you don’t have to use a spanner every time ?

@PhilVandelay 2 жыл бұрын

Yeah I'll probably add that at some point, although I don't really use the swivel feature very often, it's more of a "nice to have when you need it" thing

@randytravis3998 2 жыл бұрын

@@PhilVandelay being on the corner edge like it is you might only turn it 1 time a year ,, thats is a great set up ..

@klomsuwan Жыл бұрын

สวยงามและแข็งแรงมากครับ

@carlosnegrovidal6755 2 жыл бұрын

Maravilhoso trabalho, muito capricho , parabéns 👍👍👍🇧🇷🇧🇷🇧🇷🇧🇷

@alexanderaguilar2235 2 жыл бұрын

Hermosa pieza, sin duda alguna eres un crack gracias por compartir un poco de tus conocimientos por cierto dónde puedo conseguir una prensa dé estás que usas en el vídeo. saludos cordiales desde México

@darrenlafreniere5034 2 жыл бұрын

Nice!

@robertdarby3189 2 жыл бұрын

Wow. Very nice. Actually I thought you were going to make a 90 degree angle bracket that would allow not just rotation in the azimuth (vertical) axis as you have done but also a second axis at 90 degrees. So you could not only yaw it but roll it as well. Perhaps a bit out there but something I have in my backlog of projects. In any case well done.

@Nicola_Colonna Жыл бұрын

SPETTACOLO 💪

@arduinomaquinas Жыл бұрын

Good job, like full ❤

@codfishknives8526 2 жыл бұрын

Nice.

@harlech2 2 жыл бұрын

ingenious design I need a vice mount like that... attached to a table just like that. I am gonna come steal yours. i am sure i can strap it to the top of the getaway car... and that it will fit in the overhead storage on the plane back home. :):):):):):):):):):)

@thunderstruck1078 2 жыл бұрын

It's now obvious, on the first glance that bluing was a great move.

@gelbertiger4103 2 жыл бұрын

Nice Idea :)

@renieregomes7239 2 жыл бұрын

Bom dia para todos aos que assistem os vídeos deste canal. O projeto deste equipamento está excelente. Com este acessório é possível trabalhar com a morsa em todas as posições porque tem como girar a mesma na bancada 360°. Deus abençoe a todos.

@jeffreyrodante5943 Жыл бұрын

I like your show I like how you do things and just fascinates me how you do things so well I watch a lot of other machine shop shows I watch mr. Pete I watch Keith Walker hey Barnes a bomb 79 I watch this watch this show to there's a lot of shows on here I watch have to do with machine shop stuff I'm into machine something like to learn more about it I try to watch your shows much I can you have a good day bye-bye

@stevebray71 2 жыл бұрын

I know it's an old video now for KZfaq sence but did you think about making the Vice brackett swivel around some form of Rotator onThe side that way you could have more movement and a lot more way that you coulld hold work for more complex grinding worke But Love the Videos you do.

@juleslobo5644 2 жыл бұрын

Moin Phil! Phantastische Arbeit, wie immer, ein Vergnügen anzuschauen. Glasperlengestrahlt für ein mega Finish, aber warum nicht im Stile des Schraubstocks brüniert? Beste Grüße!

@PhilVandelay 2 жыл бұрын

Hatte ich erst überlegt aber war ich dann ehrlich gesagt einfach zu faul zu ;)

@luismariano001 2 жыл бұрын

Everything that you do is really Amazing. Where are you from? Regards from Venezuela 🛠🇻🇪

@PhilVandelay 2 жыл бұрын

Thanks! From Germany

@desyquintero8451 2 жыл бұрын

@@PhilVandelay GERMANY = Where mechanical art is born

@alexanderaguilar2235 2 жыл бұрын

Hermoso tornillo de banco, me podrías decir dónde puedo comprar uno igual porfas mi estimado

@westweld 2 жыл бұрын

Very nice man........whats up with that probe? You like it? Have always considered getting one of those

@PhilVandelay 2 жыл бұрын

It's a bit quicker then the spinny ones and I think a bit more reliable but I guess that depends on the operator. Overall I prefer it, well worth the ~30 bucks I think I spent

@rocksolidhugo 2 жыл бұрын

Great job, very inspiring. What is your shop floor made of? (Y)

@PhilVandelay 2 жыл бұрын

I just rent this place so I'm not entirely sure. But the floor itself is concrete and I think they use some kind of black floor paint on it. It's quite durable but you can chip it when sharp objects fall down. Overall best floor I've ever had in a shop, although it soaks up a lot of light

@rocksolidhugo 2 жыл бұрын

@@PhilVandelay It almost looked like some kind of rubber mat. Thank you for your videos , once again

@TheKnacklersWorkshop 2 жыл бұрын

Hello Phil, Very nice work sir... That welding bench is so nice, and on the vice stand, I really liked that you took the time to fill the gaps with weld... Just because you can't see something it does not mean it is not there... Cheers. Paul,,

@liboy34 2 жыл бұрын

Hi This is a great job. Where are you buy a original sieg(red) machine?

@PhilVandelay 2 жыл бұрын

In Germany they are sold by a company called "Paulimot"

@guillermoa.giraldosanchez3570 2 жыл бұрын

Hola Phil, trabajo impecable característico de usted. Que marca y que tamaño es ese tornillo de banco? Gracias

@PhilVandelay 2 жыл бұрын

Sadly I don't know, I bought it used but I don't know where it came from originally. Not sure about the size but it weighs about 50kgs so pretty heavy

@guillermoa.giraldosanchez3570 2 жыл бұрын

@@PhilVandelay Gracias por responder.

@liamobrien9451 2 жыл бұрын

Are you using a stubby gas lens on your torch or are you still using the old style stuff?

@PhilVandelay 2 жыл бұрын

On my regular torch I do, but it's only rated to about 150A and it literally started smoking here after a few minutes, so I had to switch to my old clunky torch with the old school gas nozzle

@Reman1975 2 жыл бұрын

Why didn't you weld right up to and around the ends of the webs? Surly leaving them as you did will introduce stress risers for cracks to propagate from? That said, it looks pretty well over engineered, so unless you're intending to use it to clamp 1" bar stock while you cold bend it with a sledgehammer it's probably going to hold up perfectly fine.

@PhilVandelay 2 жыл бұрын

Fair point, as for why, I didn't want to put even more heat into that plate since the thing already started to warp, but also like you said, it's overbuilt as it is, so I figured it's not necessary. I wasn't even going to weld the inside at first but I figured if I don't, somebody is going to comment on it ;) I'm pretty sure if you destruction-tested this, the mounting bolts would shear off before the shelf takes significant damage - but I think we'll never know

@Jerklolschannel 2 жыл бұрын

You should add a filter to your camera when filming welding. The bright arc can easily leave hot pixels on your sensor, damaging it permanently.

@PhilVandelay 2 жыл бұрын

I've heard about this before, but I've been filming welding shots for years and my cameras are fine.

@michaelrosenlof1084 2 жыл бұрын

Beautiful job Phil, looks outstanding! BTW, the shirts arrived and they are fantastic-We really love them-Well done Thanks ✅👍👍

@PhilVandelay 2 жыл бұрын

Nice, glad you like them!

@jaysmith4222 2 жыл бұрын

What brand of vise is the one in the video? Thanks

@dennisyoung4631 2 жыл бұрын

Large Vise/Vice. (Wonders aloud, “where can I get one like that?”)

@xuannhapham9964 2 жыл бұрын

Tuyệt vời bạn .

@RexusKing 2 жыл бұрын

What tool did you use to tap on the mill? It seems you just chuck the tap in the mill's collet?

@PhilVandelay 2 жыл бұрын

Yeah works just fine for through holes, for blind holes I usually just machine tap the first few revolutions and then move the spindle by hand.

@davidwillard7334 2 жыл бұрын

@@PhilVandelay So How many Broken Taps ! Doing !! That ! This way ! Then !??

@FrancisoDoncona 2 жыл бұрын

Are you left handed or like me you find the tig torch easier to handle and feed with your dominant hand?

@PhilVandelay 2 жыл бұрын

I'm left handed

@davidwillard7334 2 жыл бұрын

What Dominant Hand ! Is ! That !??

@paulwomack5866 2 жыл бұрын

A) Nice precision workmanship B) don't you think that for a heavy duty vice bracket you rather over-did the precision workmanship? :-)

@PhilVandelay 2 жыл бұрын

Yes probably, but there's just something satisfying about overdoing things

@davidwillard7334 2 жыл бұрын

@@PhilVandelay YOU !! MUST !! HAVE !! AN !!. ABSOLUTE !! LOT !! OF !! SCRAP !! METAL !! LYING !! AROUND !! EVERYWHERE !!??

@DPTech_workroom 2 жыл бұрын

👍

@madeinromania7486 2 жыл бұрын

🥇

@andreashabijan2514 2 жыл бұрын

Moin, was für eine Fräse benutzt du aktuell?

@PhilVandelay 2 жыл бұрын

Sieg SX4

@janwijbrand 2 жыл бұрын

Ow... 08:44 and 08:51... I think that's called satisfaction

@iurii-wind 2 жыл бұрын

Класс!👍

@cheddarcheese 2 жыл бұрын

Phil Are you left-handed?

@PhilVandelay 2 жыл бұрын

yup

@user-mi3zs6xp4x 2 жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍

@davidwillard7334 2 жыл бұрын

Something OVERLOOKED ! THERE !! AND ! TOO MUCH ! WELDING !! OVERKILL !! TOO !! BUT ! THANKS FOR YOUR IDEA ! HERE !

@yak-machining 2 жыл бұрын

Can you hammer on it? Or is it too risky

@PhilVandelay 2 жыл бұрын

Depends on how big the Hammer is I guess but I think it would take a lot to damage/bend this

@joell439 2 жыл бұрын

👍👍😎👍👍

@Dzon_Jacek 2 жыл бұрын

👍🙂

@alessandromcf5681 2 жыл бұрын

SHOW SHOW SHOW

@alexwbakker 2 жыл бұрын

no gun blueing?

@PhilVandelay 2 жыл бұрын

I was going to but it's always a bit of a hassle to get it even with large surfaces. Maybe I'll blue it later if I feel like it

@painterpain 2 жыл бұрын

well, it was no problem with you being talking) in case you were interested.

@rogerabdallah23 2 жыл бұрын

Nice work! BUT BUT BUT you will warp Your welding table with that weight!!!

@PhilVandelay 2 жыл бұрын

Lol are you serious

@thetechnician5156 2 жыл бұрын

why tig use stick welding it cost less

@stefanschutz161 2 жыл бұрын

Geil

@user-hd1wp2qj1s 2 жыл бұрын

молодец, придумал сам себе работу

@piesdescalzos27 2 жыл бұрын

don't you have a plasma cutter lol

@nguyenquangnguyen566 2 жыл бұрын

Attach that heavy vise to flat table is a bad idea

@reinobrowne9597 2 жыл бұрын

imagen having a budget of like 10 mil and your only goal is to make a workshop like you want it to be

@tiwsal8416 Жыл бұрын

Hey you did not tell us about your sandblasting station...Wtf 🤬

@hugobiddlecombe504 2 жыл бұрын

Just for your safety, don’t wear gloves if you’re using the linisher with the work plate. If you touch it with the glove it will get sucked in between the belt and the plate and your finger will be stuck there getting ground. It sure beats a quick scrape.