Heeltoe's Ingalls Spherical Camber Kit, Versus bushing kit & Install DIY, 04-08 TSX/TL, 03-07 Accord

Рет қаралды 9,832

7 жыл бұрын

Heeltoe's exclusive look at the new 38727 rear lower camber kits for 2004-08 Acura TSX/TL and 2003-07 Honda Accord. We compare them to the existing rubber bushing kit, and give you some tips and tricks for install!
========================
Shot and Edited by Minute Rice Channel:
/ minutericechannel
========================
Music:
Electronic Vibes by HookSounds www.hooksounds.com/
Creative Commons - Attribution 4.0 International - CC BY 4.0
creativecommons.org/licenses/...
Music provided by Audio Library • Video
Jorg by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music provided by Audio Library • Jorg - A Himitsu (No C...

Пікірлер: 32

@MrLazlness 7 жыл бұрын

"you're gonna get instructions" Tosses them to the side like a boss :D

@Heeltoe. 7 жыл бұрын

Lol, you almost made me spit out my coffee right now.

@HoMiE327 7 жыл бұрын

Awesome video, very informative; can't wait to install the same kit on my TL.

@wusty23jd 5 жыл бұрын

4:18 "Don't let your buddies see you do this part" lol

@Heeltoe. 5 жыл бұрын

haha, funny or death. We choose funny.

@tsx_jesus 7 жыл бұрын

And its the rubber style

@DilianMitev 4 жыл бұрын

Great video! I have an 07 TSX, completely stock suspension. recently noticed that both rear wheels have negative camber, and did alignment recently which confirmed it. Clearly that camber kit will fix that..but is that negative factory camber that much of a problem in your opinion? it probably handles better..maybe would wear the tires more?

@Heeltoe. 3 жыл бұрын

Sorry for the delay in reply, and thanks for watching our video! The rear camber can give you more grip when cornering hard. The tire rolls under the outside wheel and that pull on the tire means that negative camber gives you more of an even contact patch instead of wearing the outside of the tire. But the impact of this really depends on how hard you are driving. And more camber isn't necessarily better.

@homelackin2234 4 жыл бұрын

I bought a pair for my scion iM, i have no idea where they go or how to set the camber to -3 lol im so confused 🤣

@xz86 7 жыл бұрын

I would use assembly oil or anti seize before installing it. the link will rust and fuse together. when I redo my alignment they couldn't adjust it, so they left it alone.

@MrJavierdinero 7 жыл бұрын

yea sir mine is rusted already I just installed it last summer

@Heeltoe. 7 жыл бұрын

The elements are harsh indeed. Anti-seize is a good idea here.

@MrJavierdinero 7 жыл бұрын

I will try anti seize am just worried when I get my coilovers installed mechanic can adjust the camber

@usausa1467 2 жыл бұрын

So I have a 2004 tsx and keep burning up the inside of the rear tires ,will this kit stop that after installed with a alignment

@Heeltoe. 2 жыл бұрын

This kit really is not available any longer, but we do have SPC kits that help quite a lot. We have them in stock usually!

@Dj1Kreationz 4 жыл бұрын

Aint you suppose to raise the suspension to load it with the vehicle's weight before fully tightening ?

@Heeltoe. 3 жыл бұрын

With sphericals it does not really matter. They don't preload like rubber bushings do.

@jtworksoncars6341 2 жыл бұрын

If it's a spherical bushings, it doesn't matter. Think of tie rods and ball joints, you don't need to preload the suspension when torquing them. Spherical bushings are a ball joint essentially, so it doesn't matter.

@Hotrod86monte 6 жыл бұрын

What exhaust is on the TSX in this video and do you have any videos of what it sounds like

@Heeltoe. 6 жыл бұрын

That's a J's Racing dual titanium FXPro 60 mm. I don't have a video though.

@miroslavzhernosek3127 5 жыл бұрын

HeeltoeAuto does this exhaust you have fit on the 04 accord coupe v6?

@tsx_jesus 7 жыл бұрын

Would i be able to purchase just the ends because i bought mine not too long ago.

@Heeltoe. 7 жыл бұрын

We've asked this as well, but the ends are quite costly. Really it is only a little more for the complete kit so it won't really be sold this way.

@tsx_jesus 7 жыл бұрын

+HeeltoeAuto thanks for the response sir.

@Heeltoe. 7 жыл бұрын

Sure thing! Vid is up before our web listing but they will be online soon here...

@Heeltoe. 5 жыл бұрын

@Dallas Texas rc crawlers We have some "silver nut" ends left, but no complete kits any more. For a complete spherical set, we have Hardrace parts.

@nickwat2810 7 жыл бұрын

i thought its only one arm each side that is control the camber??

@Heeltoe. 7 жыл бұрын

Yes many people think this. But these are lower arm kits and you need to adjust both lower arms to get camber change

@WillArmes80 7 жыл бұрын

I believe one is for camber and one is for toe

@Heeltoe. 7 жыл бұрын

Yes many people think this. But these are lower arm kits and you need to adjust both lower arms to get camber change. So while one adjusts toe, both need adjustment to change camber.

@gregnyce1238 7 жыл бұрын

98-02 Accord 01-03 cl 99-03 Tl fits the same parts

@Heeltoe. 7 жыл бұрын

NOT CORRECT. The application you are referring to takes different arms that are equal length. We do not at this moment have a bearing version of the 38720 kit, but likely will soon.