Easy to follow step by step instructions how to join together a clock work and the casing of a dutch zaandam clock. check out our clock parts store at www.antiquedutchclockparts.nl
Пікірлер: 18
@ihsankirac6565 жыл бұрын
Thanks . Thanks to you I repaired my watch :)
@Tony-Waldron7 жыл бұрын
Love the video guide, very easy to follow.
@TheKever802 жыл бұрын
Goedemiddag zou u mij aub kunnen vertellen hoe ik de escape weer kan laten werken? Het lijkt wel of die vast zit en hij hangt ook niet in het midden. bij voorbaat mijn hartelijke dank hiervoor. Groeten Hans
@antique_dutch_clock_parts2 жыл бұрын
de ankerbek in het midden v h tandwiel en dan de arm vanuit de positie waarin die zit naar het midden drukken
@samanthaarmitage5212 Жыл бұрын
Having a little problem with my zaamdam Dutch atlas clock my little hand isn’t moving round. Can anyone help please
@antique_dutch_clock_parts Жыл бұрын
is it lose on the axe, then make the round hole smaller with a pliers. if it is pushed down to far it could be stuck as well.
@CarverEngraver4 жыл бұрын
Can you please tell me what the length of one chain is ?
@antique_dutch_clock_parts4 жыл бұрын
180 CM
@CarverEngraver4 жыл бұрын
ANTIQUE DUTCH CLOCK PARTS Thank you ... I ordered a Zaanse Zaandam Blue Delph and it had to go through customs .. There is a chain missing and now the pendulum will not swing .. it will go to the right but stops dead middle ..
@antique_dutch_clock_parts4 жыл бұрын
@@CarverEngraver The escape is ofset, you need to set it again by moving it slightly to the rightthat it goes evenly far left or right.
@CarverEngraver4 жыл бұрын
ANTIQUE DUTCH CLOCK PARTS. I’m not sure what the escape is exactly .. I can send video if I can get an email ... mine is cherylmc58@gmail.com
@CarverEngraver4 жыл бұрын
ANTIQUE DUTCH CLOCK PARTS Oh ok got it watched the end of the video .. Thank you I will try that
@waitersluvhjy667 жыл бұрын
My works too. Used woodprix handbooks and build it with no problems.
@NYskyHI6 жыл бұрын
thanks for posting this video. I found it very helpful. I am trying to repair my grandparents zaadam clock. it has not been working for years. I removed the clock work, and used compressed air (from the can) and oiled the axle points. after reassembling, there seems to be a problem with the escapement as it will not maintain movement. There is some jiggle with one of the axles when I pull on the movement chain. I was wondering if this could be the cause for it not having movement. I posted a video here. kzfaq.info/get/bejne/oJdhgcyjpr6nqmg.html can you let me know your thoughts?
@antique_dutch_clock_parts6 жыл бұрын
the axle is indeed lose in the bearing however that is the chime side and shouldn't interfear with the time side. do you get a movement on the escape and how long?
@NYskyHI6 жыл бұрын
no movement at all from the escape after pulling on the chain.
@bRrigada12 жыл бұрын
❌❌❌
@doylemetzinger17747 жыл бұрын
Im using WoodPrix instructions to make it and I do it already :)