Henry Numatic PCB bypass

Henry Numatic PCB bypass - faults

Рет қаралды 20,821

Reviews,Fixes,Hacks Munsur

Күн бұрын

In this video I show you how to bypass the PCB on a Henry vacuum cleaner. I also outline some common faults.

Пікірлер: 36

@tobesnoble2516 2 ай бұрын

Awesome, worked a treat and saved me buying a new machine. Many thanks.

@reviewsfixeshacksmunsur3805 Ай бұрын

No problem. Glad it helped.

@Johnx961 4 күн бұрын

I`m a bit thick when it comes to electrics but that was so well explained the old Henry is back in action. cheers.

@reviewsfixeshacksmunsur3805 3 күн бұрын

I’m glad it’s been useful. Please like and subscribe. Thanks

@tonivaripati5951 5 ай бұрын

Just repaired my one, Thank You for the instructions, that save me a few quid, couldn't of dun it without your help,

@Meatbeerboss 10 ай бұрын

Henry is now back in action! Thank you so much.

@leemccowen1913 10 ай бұрын

Worked like a charm. Saved me buying the pcb for £18.99 and the misses can get back to cleaning lol

@olivertate8223 2 жыл бұрын

Thanks for this - my Henry is now back up and running - we always used it at full power, so actually an improvement!

@JacksVacs 11 ай бұрын

Great tutorial! One I was serving for someone working perfectly fine!!!

@markhovell76 3 жыл бұрын

Great video mate thank you! 5 minutes straight to the point! Hetty can go back to hoovering up bricks!

@ML-jr1yz 10 ай бұрын

Thanks Dude , fixed mine that was in the cover for months.

@bmt3315 3 жыл бұрын

Found this to be the most helpful video. Thanks.

@smkahn 3 жыл бұрын

Had same problem not working, removed pcb, now its working, thanks for video help

@ajhewison 3 жыл бұрын

Worked for me, thanks

@ownitg4f588 3 жыл бұрын

Where do you buy the white cable? And could you not replace the white cable straight from beginning other than taking all them out?

@altafrajadaily 3 жыл бұрын

Can we change simple rocker switch ?

@lorrainedormer8306 3 жыл бұрын

What is the black grey thing called going around blue brown cable some thing to do with noise or power disruption

@reviewsfixeshacksmunsur3805 3 жыл бұрын

It is just a holder.

@LowFamilia07 3 жыл бұрын

My Henry does not work and the light of the Hi switch is not lighting up. Do you know if in this case the PCB is faulty or the Hi switch?

@smkahn 3 жыл бұрын

I had same problem would start and go off, the high switch didn't light, so I removed the pcb, put all back and works fine

@LowFamilia07 3 жыл бұрын

@@smkahn Thank you for your information. 👍🏻👍🏻👍🏻

@reviewsfixeshacksmunsur3805 3 жыл бұрын

Yep. Faulty PCB. Do as in video

@thecluelesspirate703 2 жыл бұрын

But will the hover be on low mode or high mode

@reviewsfixeshacksmunsur3805 2 жыл бұрын

On high

@thecluelesspirate703 2 жыл бұрын

Perfect it’s a done deal will be done today finger crossed Henry will be alive again

@robshaw3655 3 жыл бұрын

what is the default suction without the pcb and hi lo switch

@reviewsfixeshacksmunsur3805 3 жыл бұрын

The default setting would be Hi. The hi/ lo switch did not exist on older Henry models and was only added on due to EU regulations on emissions/ efficiency.

@hellothereknownasunknownus6535 3 жыл бұрын

Now that he has removed the pcb, Henry will now run at his full 1200w

@reviewsfixeshacksmunsur3805 3 жыл бұрын

@@hellothereknownasunknownus6535 without the pcb the vacuum will run at full power. If you so wish you can replace pcb as they are about £20. Better than scrapping an otherwise good vacuum cleaner.

@hellothereknownasunknownus6535 3 жыл бұрын

@@reviewsfixeshacksmunsur3805 I would buy another pcb, but to make it last longer I would take it out once a year and clean the carbon dust off it

@Angrylad. 3 жыл бұрын

@@reviewsfixeshacksmunsur3805 buy the new auto save pcb, numatic was aware of this problem so they flipped the pcb so the electrical side wasn’t exposed to the carbon

@SunnyvaleTrailerParkSupervisor 2 жыл бұрын

Buy a new pcb there only 16 quid

@motormouthalmighty 2 жыл бұрын

THAT WAS ABSOLUTELY DREADFUL.TOTALLY APPALLING PRESENTATION.THAT COULD MISLEAD SOMEBODY INTO AN ELECTRICAL FATALITY.FAR TOO RUSHED,VAGUE,UNCLEAR.YOU EXPLAIN DANGEROUS ELECTRICS,STEP BY STEP WITH CLEAR DIAGRAMS,NUMBERED STEPS AND EXPLANATIONS.THAT WAS VERY POOR.