Hidden Beauty - End Grain Ash Bowl - Wood Turning
Рет қаралды 5,417
7 ай бұрынThis is the first time that I have attempted end grain bowl turning. It took twice as long and kept blunting my tools.
I'm very happy with the result, but won't be rushing to try another end grain project again so soon!
Thanks for watching
Bowl Sanding tool amzn.to/3FIxYU1
Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ
Charnwood Lathe amzn.to/3KDnkxK
Beeswax Oil amzn.to/3uNVsVz
*If you shop through these links, I may receive a small commission. The price is the same for you, but it helps support me as a beginner woodturner in my quest to get a better lathe to make even bigger projects, and I really appreciate it!
Note this is NOT an instructional video, or designed for any education purposes, it is simply my own personal steps on my wood turning journey.
#oakbowl
#woodturning
#rdmwoodturning
@MrDrewmcdonald 6 ай бұрын
I love the result.
@RDMWoodturning 6 ай бұрын
Thank you. It really was a challenging turn.
@SilverBack. 7 ай бұрын
WOW that is Awesome 🙌🙌🙌🙌🙌🙌
@RDMWoodturning 7 ай бұрын
Big thank you! 👍🙂
@billlarrabee9436 7 ай бұрын
Very very nice, great work!
@RDMWoodturning 7 ай бұрын
Thank you! Cheers!
@DavidBird-uu8km 7 ай бұрын
Very nice I love the cracks it gives the bowl it own character.
@RDMWoodturning 7 ай бұрын
Totally agree. Thank you for watching🙂👍
@carolriley8472 7 ай бұрын
Lovely bowl!
@RDMWoodturning 7 ай бұрын
Thank you very much!
@michaelross8794 7 ай бұрын
I took a class when I first stared turning. I practiced a bit, but then after a couple months got busy with other things. When I got back I forgot one cruicial bit of wood placement and, as a result, only did end grain turning. I got quite good at it before watching videos (I think one was yours) and realizing I was doing it wrong. I haven't done an end grain in a while now. I may today though. Now, it's time to get into the shop and turn!!!!
@RDMWoodturning 7 ай бұрын
I've made 500+ bowls and this was the first time end grain turning. Took twice as long and had to sharpen my tools at least 10 times! Hope your next bowl turns out well.
@michaelross8794 7 ай бұрын
The current bowl is an exceersize in what NOT to do. I lost focus for sa second and ...sat in the emergency room fora couple hours. It's all good. Jut will have towear a bandage till christmas.
@RDMWoodturning 7 ай бұрын
Ouch! Take care@@michaelross8794
@markduggan3451 7 ай бұрын
A very nice bowl.
@RDMWoodturning 7 ай бұрын
Thank you! Cheers!
@raydriver7300 7 ай бұрын
It ‘turned’ out nice 🌞
@RDMWoodturning 7 ай бұрын
Thank you! 😊
@DougMilleratWoodSpunRound 7 ай бұрын
Well done. You did the outside top to bottom to reduce tear out. Good on you. The inside you also turned top to bottom. To cut with the grain you should have been cutting center to outside/bottom to top. Always the opposite to the outside. Good looking bowl in the end. Always a win.
@RDMWoodturning 7 ай бұрын
Yes the outside worked really well. On the inside I expected to cut from the middle to the outside, but it actually created more tear, which was very strange. Outside to middle worked surprisingly well, perhaps it was aided by bevel rub or something? A few shear cuts to finish definitely helped though. Either way, I'm going to avoid end grain for as long as possible, as that bowl took 7+ hours to turn, which is double what I expected! 🙂👍
@DougMilleratWoodSpunRound 7 ай бұрын
@@RDMWoodturning there you go. I was told WAY back that there are definite rules to turning, but don’t let them stop you. Sometimes the rules are meant to be broken.
@JOHNSmith-pn6fj 7 ай бұрын
Great bowl. With the cracks it looks ancient.
@RDMWoodturning 7 ай бұрын
That's what I thought too. Thanks for watching
@jonmurph589 7 ай бұрын
Ash has been the toughest for my gouges also, even struggled using carbide tips. Your end result is well worth the effort though, very nice 👍
@RDMWoodturning 7 ай бұрын
Thanks 👍 The end grain took twice as long to turn, but I'm very happy with it.
@MASI_forging 7 ай бұрын
Nice piece of work 👏👏
@RDMWoodturning 7 ай бұрын
Thank you so much 😀
@RightHandShot 7 ай бұрын
End grain can be a pain to turn, well done.
@RDMWoodturning 7 ай бұрын
Thank you. Yes, I'm going to avoid any more end grain turning for as long as possible!!!
@miroslavpraznovsky6372 5 ай бұрын
Hi. What did you use for the cracks? You can give a link to the store
@RDMWoodturning 5 ай бұрын
I used CA Glue (super glue) and an activator spray. I tend to use Starbond, but other brands are very good too.
@indianatone218 7 ай бұрын
Nice job gotta keep trying lol ,iv got a Charnwood too does yours have a longish delay before motor starts im wondering if theres something wrong ,i have hardly used it i got another motor from charnwood as the first motor just smoked and burnt out ,hope your avin better luck .
@RDMWoodturning 7 ай бұрын
No delay for me. I've had this lathe 3 1/2 years and it's been rock solid. Hope you have some luck soon.
@Zzrdemon6633 7 ай бұрын
How does going top to bottom stop tear out?
@RDMWoodturning 7 ай бұрын
kzfaq.info/get/bejne/oNGKl86erZa-hIk.html I'd recommend watching this video from Kent, as he explains it very well (about 1 minute in). There is also a great video here kzfaq.info/get/bejne/oNWKfdN-trC1Xac.html In essence you always need supported grain cuts to avoid tear out. Hope that helps.
@lexskywalker6373 7 ай бұрын
Thank you both💚
Mike Holton - hand made crafts
Рет қаралды 16 М.
Namukk chuttum
Рет қаралды 85
超人夫妇
Рет қаралды 46 МЛН
Glenn & Liza Teagle Woodturning & Carbide Chisels
Рет қаралды 2,4 М.
Tomislav Tomasic Woodturning (Dodir Drva)
Рет қаралды 10 М.