Friend, I hope this is well received. For your safety, and if not for you, then for the car, use a jack stand or equivalent. Never rely on the jack alone to hold up the car. There may not be clearance to drive the car up steel ramps, but they can be used as stands. Having chalked the rear wheels and e-brake applied, turn the front wheels full right and lift onto the ramps. I don't know if it's safe to do on this car, but lifting under a front suspension point that raises the wheel will usually give clearance to place on ramps. I honestly don't know if this car's suspension has the range to be lifted onto ramps one wheel at a time. But if you choose to lift it that high, invest in a large 2 ton low profile long reach hydraulic jack. Have a quality jack. Enough has been said about the wheel, but if you go through the trouble of loosening the lug nuts, go ahead and rotate that side, assuming front to rear switch pattern, and leave the front wheel off to access the filter. Wiping the oil off the flange and threads? Not necessary. It gets oily any way. Just clean the surrounding areas. Blowing into the filler hole? Not necessary, and it might start a new Japanese fetish. Honda blowing. Backing off the filter to make it easier to remove? Not necessary. 1/2 to 3/4 turn past hand tight and you should never have any trouble. Instruction on box. Oil is drawn thru the center of the filter and the filter is pulled towards the flange face in the process. The rubber seal serves as an air seal, not a pressure seal, so only a firm tightening is good. That is why we oil the seal face, so it can slip some. Some cars will suck the filter in so tight they're a pain to get off. If you have one of these, ('96 Cherokee) relax, its not your fault and "backing off the filter" will not help. It's just the nature of your car, and you're lucky if you have such good pressure. If your oil filter doesn't require a wrench to take it off, it is not on tight enough. And lastly the drain plug washer. If the drain plug has a bonded seal, like Fords, inspect it. If not, get an aluminum crush washer. Not a copper or other metal, and not a rubber. Don't reuse the old washer. Do not oil the washer surfaces. You want friction to do its job here. 1/4 past snug? look it up. Doesn't take much. I don't mean to be such a critic, I just hope to contribute something useful. Be well.

Great job, man. Appreciate you taking the time to document this.

im almost positive you can turn you wheel all the way to the right and then unscrew the oil filter

Just bought a 2010 Accord EX-L. Love the car, love the video....headed outside to duplicate your process. Thanks man, high quality vid. I guess you made this in 2011?.....literally still holds up 10 years later as the most informative/detail oriented video for this make and model. Well done sir.

Thanks for the video I was just heading out to the garage to tackle this little gem and was not planning on taking off the tire... now i know, thanks. Just one tip for you when you go to install the new oil filter use a little of the new oil on your finger to lube up the gasket on top of the filter. Also it is a good idea to pour a little oil in the filter to eliminate an air gap and help the system circulate. The oil on the gasket helps prevent it from binding or getting a gouge should something like grit get in there during tightening. Eh its something I learned years back and it stuck with me for what its worth. Thanks again for taking the time to post the video and for the tire...

You make a good point. My older vehicles came with one with the drain plug/bolt. My newer cars don't. I guess I never gave it much thought since it's not leaking oil.

@unspec1fied Yea....you're right. Now that I watched a video of myself changing the oil, I realized that there're many many things that could have been done better. I appreciate the feedback.

@lexusfan100 Though I maintain the ES300, I do so without passion. It's my parents car and I don't get to drive it. See the Chevy Prizm in the video? That's what I use to drive. This Accord is the first car I purchased and wasn't a hand me down. In one of your videos you have blue lights in your car. How did you do that? Is it wired to your interior lights?

I did an oil change on this vehicle using a steel ramp. On a flat surface and with quality rubber chalks, I turned the wheels full right and drove the front right wheel half way up a ramp. E-brake, park and chalk all the wheels. Works well. I could have driven to the top of the ramp but it wasn't necessary to get the clearance I needed and I didn't have someone guiding me.

Literally the only video on KZfaq that helped 👍🏾

Thank you for the video! If you change oil yourself you might want to consider getting fumoto drain valve with a nipple. And as someone mentioned earlier you can turn the wheel all the way to the right instead of removing it. Also some people pour some oil into the new filter - makes it easier on the first start and oil level judgement. With drain vavle you can easily drain a little bit of oil out if you overfill - and it makes oil change quick, clean and easy (no tools).

really good video I have a 07 accord V6 and is the same process I always use mobil 1 synthetic oil. but I have a question the engine when it gets to its normal running temperature the radiator fans come one is this common in V6 hondas or u think maybe there could be a problem? the temperature is normal and A/C is off I know they turn on when ac is on but not when its off even in cold weather any advice would be appreciated thanks.

@lexusfan100 Hi lexusfan! I think we got the ES300 in 2001. Since the older model cars required more frequent oil changes, like 3000 or so, we use the cheapest 5W-30 conventional oil we could find. We changed the oil every 2500 miles because it's easier to keep track. I'm glad that today's Honda can go 7000 miles between oil changes. I hated changing the oil in the winter since I rotate the tires too.

I'll have to see if I can just turn the wheel next time. I guess I never thought about that because I always rotate my car tires at every oil change.

I've looked into doing it on my new Honda and they come when you buy a Honda oil filter. Recommended to put a new one in at every change. Looks pretty easy though, thanks for the video. I may start changing my own if I can get away with it at my apartment.

Hi. This process will apply to your car. I don't know where the filter is located on the 2004 but you can easily spot it. Basically, if you look at my Lexus and Acura oil change tutorials, the steps are identical to this. Difference were minor, such as where to find the oil filter and that stupid under car cover in the Acura.

@AwkwardHamster the white light is LED..i got it from online..i changed all my interior lights to LED..so now its bright and looks good.the reading or map light in front is not blue but white..but its ok. now i am thinking of going LED for rear taillights bulbs too...

I don't mind taking the wheel off because I rotate my tires every oil change. But I'll definitely give what you suggested a try.

Check your vehicle's manual for their directions. I believe the older vehicles, cars made before 2007, required an oil change every 3000 miles. In the newer vehicles, you can go roughly 7,000 miles between oil changes. Basically, my car's manual said to change the oil according to the oil life indicator in you dashboard.

Great video man. Very useful. You just saved me a headache!

nice video..plus nice ES300 i see in the garage.what oil u put in that

Great video. Though, removing the tire was unnecessary since you can easily make it visible by turning the steering wheel right. Yes, removing the tire makes the job process on the oil filter easier, but requires extra steps in order to do so. Then again, nice video, I needed the memory jog.

Thank you. Your vid is very easy to follow

Great video,simple instructions. Quick question, how do you dispose the old oil in the bucket?

Thanks for posting; Suggest better leverage technique than Vise-grips at counter 209 which can gall the Ratchet Handle and slip at high tension. Instead use a combination wrench. Slide the box end onto the end of the Ratchet handle with the angle the direction of travel, it then becomes the extension. Bonus if you need more leverage, you can then place another combo on the open end of the first. Also agree with others when the filter is able to be installed level as with your Honda, good to pre-fill it so the system will not have a void when starting.

That's good to know because I haven't purchased the Honda oil filters yet. I've been buying from any auto store that has them on sale and those don't come with one.

The oil filter for the 07 is behind the right wheel as well?

Hi. With my wife's 4 cylinder car, I would starting by pouring 3 quarts in when the car is still elevated. Close the cap, lower the vehicle, start the engine, and let it run for 5-10 sec before shutting it off. Then, I would use the dip stick to measure and pour 1/4 of a quart at a time. Between each pour, measure the oil to see if it reached the zone. Hope this helps.

theirs a lot of talk about 5w20 or 5w30vs 10w30 how has the well did the 5w20 treat you thanks

@PQPLAYER92 yea...I tend to use which ever was on sale. If you prefer another brand, feel free to share your thoughts.

thank you for the help sir.

@AwkwardHamster haha nice..i have a 2000 es300 and i change it frequently too..m thinking of going fully synthetic .but still debating..are u on any lexus forum since u have lexus..??

Why didn't you use a new crush washer on the drain plug?

Do you know the order (numbers) of each cilinder? Im using an accord coupe 2008 automatic and the computer told me to fix cilinders 4 and 5. Please :)

I use to follow that for my Ford and Chevy cars. Keep in mind those were old vehicles and I had to change the oil every 2500 miles. After I got this car, I decided to follow the instructions in the manual. These newer cars are much more complicated. So if the manual said to use 5W20, I will use 5W20.

Is the oil has to change in every 3,000 miles? And tire rotation in 10,000 miles?

@juan102008 Hi Juan, I haven't paid that much attention to the fans. When I heard rattling noises coming from the back of the car, I brought it to the dealership and they were very helpful with diagnosing and resolving my issue.

Thanks for help... I finally know where my oil filter is at... I just got a 2012 Honda Accord and need to do an oil change, however I want to mark my filter before I take it to get it done as previous times on my other vehicles I’ve gotten the oil changed but got scammed on filters even though I paid for a complete oil change. :)

AWESOME!!

you don't have to take off the tire just spin the wheel outward on that side and you can access the oil filter easily

@elsiguere I'm glad it helps.

Thanks for watching! And I'll need to check out Walmart. My local Pepboys and Autozone raised their oil prices to over $35.

If I drive anywhere pass 5000k...I would not use a fram filter. What kinda oil are you using? is it SAE approved?

I use Fumoto valve and it works great. btw Costco will have a sale on Mobil1 synthetic oil in February - about $26/ six 1qt pack. As alternative to 'fram' filter using a mobil1 extended performance and changing it every other time you change the oil could be a better option. Honda actually recommends changing filter every other time.

hi sir, i have a 2004 honda accord. its a 6 cylinder car. does the same exact process applies to my car? by the way, this is by far the best vid i found. keep it up

@AwkwardHamster Use synthetic. You can go 7,000 miles on it in any car as long as its synthetic.

@o0Sp3cia1K0o Hi. The brand is Kendall and it is made by ConocoPhillips. It is SAE approved 5W20 full synthetic. I think it would be quite difficult to find one that isn't SAE approved. I usually buy whichever is on sale. My viewers tell me Walmart sells inexpensive motor oil. Thanks for watching.

Nice vid bro, I've a question. In the summer with more than 100°f still recommended 5w-20 ? Actually my accord has 112k miles

why do you keep it low on oil?

Lol lady in the back getting her key from under that mat..

Great video man only thing i would like to add being the car doctor is get a new oil drain plug washer it’s a one time use thing that’s only bout 1$ to keep the oil from dripping on to the pan

Great vid. for us with no automotive knowledge. How many quarts are needed for a 4 cylinder

my final conclusion was the same i'll use 5w20 although the main reason for the switch on handa's part was to meet cafe standards the shits like water though and i dont think its would lubricate well in the hot months so i may go to a 5w30 in summer

Thanks

@AwkwardHamster Incorrect. If you are using synthetic you can go 5,000-7,000 miles in between oil changes. Regular conventional oil is 3,000 miles. Always change the filter when you change the oil, too.

thanks

You don't have to take front wheel off, just ride car onto 2 by 10 boards and turn wheel and u will have access to oil filter.

Why does my 2004 accord say 8000 (5000mi) on the "heavy duty" schedule and 16000km (10000mi) in the owners manual... i don't think honda uses synthetic??? i run mobil 1 synthetic to 10,000kms though... every even 10k on the dot, perfect time to rotate tires too! I always use a new crush washer on the oil drain plug also!

Nice job.

Great vid, question though. I have a 2011 v6 my manufacturer recommended is 0W20 why not yours?

yes

No new crush ring for the oil pan bolt? And for your viewers, perhaps the socket needed for that bolt? I think it’s a 17 mm.@

@Wolfman12354 Thank you.

just a couple of things. anytime you are going to be under a car that has been jacked up you should use jack stands for safety. secondly in addition to lubricating the oil filter gasket you should also partially fill the filter with oil.

Is there a washer between the bolt and the oil pan so that you can remove it easily every time you change the oil?

What year is this? I was trying to find out which side of the pan the drain plug was on. The 2012 V6 calls for 0W20. I looked for Royal Purple, but went with Mobil 1 high mileage extended performance. You lost me at Kendall oil

@AwkwardHamster Buy a drain pan from Wal Mart. It's like 7-8 $ and it has a spout to pour it into a jug or something. I pour it into a cat litter jug. Plus it's slimmer so it gives you more room to work and has a raised portion to put to filter on to drain. Much easier & cleaner.

@Jaosn437 Hi Jaosn437. You are absolutely right. After I made this video, I realized the mistake. But I figure I post it anyway.

what was the point of putting the used oil in a bag...

@juan102008 thats normal the fans come on to keep the engine cool.

You don't really need to take the tire off in order to change the filter, FYI

Good job ,can I use 5w30 instead

Also should definitely fill to the top level of the dipstick

How many liters need accord v6 2010 with filter change

I own the sedan but the instructions would be the same for both the Accord coupe and sedan.

AS suggested, get a drip pan, makes it lots easier to drain into and dispose of into a waste jug or container. I change the oil in my car every 1k miles. I do it this way to keep fresh oil in the engine and because it's cheap...+/- $13

I do not know the numbers.

5 quarts in a 2008 Honda V6? My 2016 Honda V6 takes 4.3 quarts. Interesting

What size is is the oil drain plug?

my car doesnt have a bolt and i have the ex-l v6 what do i do respond as soon as possible please

Cant you reach the oil filter just by turning the wheel ?

I don't notice any difference between synthetic vs conventional. My old vehicles are still using conventional and it has over 100K miles. I think both oils are good. My old car still runs great.

Is the oil filter accessible when you're under the car?

I bought 6 qt at Costco for $32.It was mobil one also full syntetic.

are you supposed to put oil in the oil filter before you screw it on?

Don't need to take of the tire just turn the wheel

You just answered your own question.

My manual for v6 says 4.5. Some forums say 5 quarts. I put 4.5

Manual on p. 318 says 4.5qt. not 5.You don't need to remove the wheel. I change oil in the same honda today. Buy original OEM filter . It cost $6 at the dealer.

As I mentioned in the video description, I use 4.5qt, but, I have to buy 5qt of 5W20 motor oil. They don't sell 4.5qt where I'm from... I'm driving the 8th generation Accord, I know the 9th generation is out but I haven't seen it. I paid $28 for 5qt of 5W20 full synthetic motor oil and filter. If you find it cheaper else where, I would love to know.

I top it off after I let the engine run for a bit.

The process would be the same.

@bobthebuilder6938 Hi bobthebuilder6938. In my town, we're required to dispose the oil at the recycling center. It's easier for me to transport it in a plastic bag and I can just puncture the bag to drain the oil into their tank.

Why do you place a bag in a bucket? Never in my life have I ever seen anybody do this, that makes no sense, especially when you have to dispose after. No autoparts store is going to accept your old oil in a bag. Also, bag could develope a hole and now you have a complete mess!

@AwkwardHamster Fram makes horrid filters. Use purlator or a Honda filter.

Also, I use nothing but wix filters!

You should be replacing the drain plug and gaskets every time you do an oil change on Honda’s.

From ada

i work at a honda dealership and used to do oil changes. what i learned is that the oil pumps are spot on accurate for the amount of oil while pouring in by the quart isnt very accurate. so if your car takes 4.5 quarts(all v6 honda's), dont pour 4 and half of the 5th and be on your way. check your dipstick, cus chances are you will add most of the 5th quart. i did this plenty of times. and sometimes i added the whole 5th quart before i was satisfied with the reading on the dipstick. good video!

is that a 2009?