4years later and this video is still helping people out. Appreciate you brother

Another jam packed video with great info! Short, but always so useful!

Thank you Gary excellent info.

Thank you Gary

Greetings my dear friend, first of all I want to thank you for your videos, very good and very helpful. I am having problems with the transmission of a 2003 honda accord 2.4 BCLA. This at the time of applying the second speed is neutralized. The first gear applies perfectly and, to be able to take the third gear, when the ECU sends it to second, I put the lever in N and then I pass it quickly to D. In this way the box returns in 3rd and then takes 4th and 5th perfectly. If I let the gearbox do its normal cycle, I get a fault code, P0752, which indicates "shift solenoid valve A stuck on". However, solenoid A has been inspected and works correctly and is within the patterns indicated in the manual, it even interchanged with the solenoid of valve B and the result was the same. The pressure of clutch 2 is not correct and for this reason the transmission has been disarmed, and thanks to its video we were able to find a faulty pipe, it was replaced but when installing the transmission the problem persists. At this point I would like to ask you if you think it is due to an internal leak in the transmission system. I thank you in advance for the attention you can give me.

Thanks for the reply we're great and but if you can do a full tear down and assembly video that would be great thanks again Gary

Would the tube problem cause a harsh up and down shift between 1st and 2nd?

Which solenoid activates the lockup clutch?

Hey gary.Any suggestion on 722.6 at cruise 30 to 50 mph have vibration like speed strips until I give more Throttle.Change valve body checked clearance.Sent drive shafts out.also change k3 out.I never got rid of it.

If you can put full assembly video together for the bcla transmission

Hey Gary, been following you for years . I’m a Honda tech , but we Don’t rebuild transmissions at the dealer . I’ve been meaning to learn, what company supplies your rebuild kits & torque converters ?

Hi,Gary I have a mcla that's keeps giving me a p0756 solenoid b has delay on d and reverse then only shifts in 1 and 2nd for a bit until I turn the car off but it won't go on 3rd gear at all

please what is the name of that broken filter, and or part number sir

Video in 1080 hi Def would be nice.

Need tube part # nobody I tried has them.