Honda Civic Rear Brake Pad Replacement 2012 2015

Рет қаралды 86,238

Күн бұрын

In this video I show you how to replace the rear brake pads in your 2012-2015 Honda Civic. If you find this video helpful, subscribe. I put out a repair video every week.Thanks for watching.
brake pads - amzn.to/3wYNFk4
Brake caliper wind back tool - amzn.to/31TkH8y
brake parts cleaner - amzn.to/2BMbOmA
Caliper grease - amzn.to/3fbmDfq
Disclaimer:
Due to factors beyond the control of Grim Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Grim Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Grim Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Grim Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Grim Repair.
Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you.

Пікірлер: 67

@jeffa7671 Жыл бұрын

Finally a video that shows how to change the rear pads

@JaniceRui 2 жыл бұрын

Hey bro thank you I had now changed my rear brakes 3 times now because of your help I appreciate the details of the item details that was named as well thank you :) so much

@nelsoncohen3334 3 жыл бұрын

Excellent video. Your descriptions and explanations were clear and instructive. Thanks Man

@Joshua-lm8cf 3 жыл бұрын

Best video demonstration on KZfaq. Thank you.

@willjones9043 2 жыл бұрын

Great video from watching it I learned how to turn the calipers in rather then compressing them like I do on some of the other vehicles that I’ve changed brakes on 👍🏼

@bagsquadreezy5778 6 ай бұрын

Mines will not turn

@jessedogg 2 жыл бұрын

You made this vid look very easy… thanks!!

@lukehanson Жыл бұрын

Great instructions. I’m about to go try it on my 2015 Civic.

@mdshakibhossain5135 Ай бұрын

Thank you so much brother for your informative video. I saw other’s videos showing only the replacement. ❤

@Mickho-yc9lu Жыл бұрын

Just saved us 200 dollars, thanks bud

@Chris-xk9op 3 жыл бұрын

Thanks dude!

@randyb9337 2 жыл бұрын

Great vid, but I would recommend you rough up the rotor with some sand paper to prevent rotor glazing.

@PPHerman 3 жыл бұрын

Ima give you the thumbs up only cause you warned manual drivers to chalk up the wheels or else the car would roll away

@bogi2u 3 жыл бұрын

Pretty good video, but I know all the stuff you’re showing. I’m looking for the f..g matching little plates and to know how to install them, up or down, the f... edges which way up ?

@RickSanchez-ww7vw 3 жыл бұрын

Man I would like to say thank you!!!! I had to break a C-Clamp to find out the hard way!

@GrimRepair 3 жыл бұрын

I did that my first time.

@RickSanchez-ww7vw 3 жыл бұрын

@@GrimRepair you saved me, and you don't even know it. Keep up the Great work

@mikeb8948 Жыл бұрын

So no need of the C clamp?

@RickSanchez-ww7vw Жыл бұрын

@@mikeb8948 no sir, sometimes you have to turn them with a big screw driver. If they have a big X indented it most likely doesn't need a C Clamp

@bagsquadreezy5778 6 ай бұрын

@@RickSanchez-ww7vwmine will not turn

@FlyMeAirplane 2 жыл бұрын

Great video. FYI on my 2012 Civic I had to remove the emergency brake cable in order to remove the caliper. Pretty easy, one clip and it all falls apart. My new pads didn't have that pin that aligns with the caliper piston?

@GrimRepair 2 жыл бұрын

Thanks. I don't think they would add that pin for fun, it probably should be there. I would get a different brand of pad.

@brianhernandez1830 Жыл бұрын

Excellent video. Thanks for the info with pushing the piston back in and lining up the cross with the back of the pads.

@GrimRepair Жыл бұрын

You're welcome, thank you.

@natezgraphics613 2 жыл бұрын

Awesome! video and thanks for the high 5 to the face lol.

@shahnawazvlog6266 3 жыл бұрын

106 like excellent video the best on you tube Thanks

@d_jeez9807 3 жыл бұрын

Hey guys, any troubeshooting tips? I am doing mine for the first time this week. What are common issues that may occur from the standard replacement shown in the video>??? Thanks

@GrimRepair 3 жыл бұрын

Check to make sure the rotors aren't scraped, make sure the pads have worn about the same. If the rotors are scraped replace them if the pads aren't worn the same you may have a caliper that is sticking. Sticking calipers could be caused by a bad brake line bad caliper or just an unlubricated caliper slide. It's impossible to tell you everything that could go wrong without being there and seeing the car though.

@mikeb8948 Жыл бұрын

How did it go? Were you able to change your brake pads without any problem?

@meshackaccount9647 Жыл бұрын

Bro please help with the product number of the rear brake pads for Honda Civic 1.8 2012 Comfort (sedan) I keep on buying the wrong ones

@GrimRepair Жыл бұрын

Are you going to the parts store?

@TheHappybilmore 3 жыл бұрын

is it bad or harmful if I removed the part that holds on the brake pads?

@GrimRepair 3 жыл бұрын

I am not sure what you mean. The anti rattle clips? Or the caliper mounting bracket?

@mikeb8948 Жыл бұрын

Is it safe if I don’t replace the old clips in case the new brake pads package doesn’t have the same exact clips? I’ll be buying the new pads from Autozone, duralast brand, I believe.

@GrimRepair Жыл бұрын

If it dosent come with new clips I usually spray the old ones with brake clean. The cleaner those clips are the easier your pads will slide, making them last longer.

@stancoleshill8925 5 ай бұрын

You can also use a pair of open needlenose pliers to turn the piston back in. I have ALWAYS done my own brakes and have NEVER had to put cloths around the brake reservoir to catch an overflow of brake fluid . . . . . EVER ! If you have never added fluid to the resrvoir, there is no reason that it would overflow. Note that in this video . . . .it did not occur.

@GrimRepair 5 ай бұрын

Most people don't know the cars' complete history. Lube shops will also top it off or overfill it if they do a flush or repair. Work on enough cars, and you'll see more than one overflow.

@stephanknubel5438 3 жыл бұрын

No grease on the pad contacts? Also what are the torque specs for the 2014 Civic?

@tom_shredz 3 жыл бұрын

That’s probably in your owners manual

@rondail5675 3 ай бұрын

How does the piston turn to push the pads out? Is the brake pedal causing the piston to rotate out or is it the emergency brake?

@GrimRepair 3 ай бұрын

The piston doesn't turn when the pads are installed. There is usually a one way ratcheting mechanism underneath attached to the e brake.

@rondail5675 3 ай бұрын

@@GrimRepair Thank you for explaining.

@shaunlo83 2 жыл бұрын

What if you cant get the caliper to twist? Helping a co worker out and need help

@GrimRepair 2 жыл бұрын

The caliper might be bad, they should twist pretty easy.

@shaunlo83 2 жыл бұрын

@@GrimRepair i end replacing both

@carreonxD 2 жыл бұрын

What model is this?? My 2015 Civic SE has rear drum brakes not disc brakes.

@GrimRepair 2 жыл бұрын

It's been a while I don't remember.

@tobiolayiwola3152 Жыл бұрын

Is it the same way you’d fix it too, I have the same model as you!

@TravisThompson10 5 ай бұрын

no break slide grease?

@GrimRepair 5 ай бұрын

At 4:19 ?

@bryanrooney570 3 жыл бұрын

shouldn't you also turn the rotors to clean up the surface?

@GrimRepair 3 жыл бұрын

If you're doing it by the book yes. On my own fleet if it's not pulsating or visibly damaged I leave it be.

@subtlehal9061 4 жыл бұрын

i tried this on my dodge caravan but lets just say it didnt go this smoothly

@GrimRepair 4 жыл бұрын

How come? What year is your caravan?

@subtlehal9061 4 жыл бұрын

@@GrimRepair its a 2003 and we couldn't get the caliper off and when we finally did the pads wouldn't com out of the caliper

@catdogky 2 жыл бұрын

3:25 OK guys. What is the name of the tool used to screw the caliper piston back in flush? Without that tool, I am dead in the water. There's nothing in my toolbox that will budge that stupid thing! This is why I despise working on cars.

@GrimRepair 2 жыл бұрын

It is called a caliper wind back tool here is a link. amzn.to/31TkH8y

@catdogky 2 жыл бұрын

@@GrimRepair Thank you so much Grim!!