Honeywell Home T9 Wi-Fi thermostat | Install and Setup

Honeywell Home T9 Wi-Fi thermostat | Install and Setup | Remodelaholic

Рет қаралды 86,800

5 жыл бұрын

Today I am adding a new device to my smart home. I am adding a Honeywell Wi-Fi thermostat to our home. I will show you how to install it and set it up to be able to control the temperature with your iPhone or Android.
My wife is pregnant and needs better control of the thermostat. This new Honeywell Wi-Fi thermostat is the solution to our thermostat needs. She will be able to control the temperature from her smartphone now.
Another cool feature is that we can gauge the temperature in each room with Smart Room Sensors. This install comes with one, but you can add up to 20 sensors.
👍Please SUBSCRIBE so you don’t miss any of our weekly videos!
/ remodela. .
Here is where you can buy your new thermostat:
(Affiliate link below)
Honeywell Home T9 WIFI Smart Thermostat with 1 Smart Room Sensor
amzn.to/30cB78L
Other Smart Devices we use.
▶️Kwikset Kevo Second Generation Smart Lock Installation | Smart Home
• Kwikset Kevo Second Ge...
Read about our projects on our BLOG:
www.remodelaholic.com
Visit our SHOP:
www.shop.remodelaholic.com
Please also be sure to check out and follow us on our other social media channels:
Instagram: / remodelaholic
Facebook: / remodelaholic
Pinterest: / remodelaholic
Twitter: / remodelaholic

Пікірлер: 71

@Remodelaholic 5 жыл бұрын

Do want wi-fi control of your thermostat? Yes or No

@joepublic6256 4 жыл бұрын

absolutely not. watching to see if I can use without.

@royfine8157 Жыл бұрын

Thanks a lot. Just purchased the Honeywell T9 smart thermostat, and this "how-to" video was exactly what I was looking for. Very Helpful!!!

@Remodelaholic Жыл бұрын

You're welcome!

@ngordon753 4 жыл бұрын

very nice explanation for novice diy'rs

@blakedurand2611 2 жыл бұрын

Super helpful video I eventually tossed out the manual and used this video instead.

@Remodelaholic 2 жыл бұрын

Glad you found it helpful

@qeelevators2960 2 жыл бұрын

I'm so glad the T5 and T9 have the same mounting for just in case

@JeanPierreWhite 2 жыл бұрын

Great video. I am looking to replace my Honeywell non smart thermostat with this unit. My old thermostat is very similar to your old one, so I am very encouraged this will work well. You skipped through the furnace options quickly without explanation. Sharing why you chose certain options would have been handy.

@MT-te3zc 7 ай бұрын

excellent work man thanks from canada

@Remodelaholic 7 ай бұрын

You are welcome! Thanks for the nice comment!

@osamakareem9739 3 жыл бұрын

Thank you

@Remodelaholic 3 жыл бұрын

You are welcome!

@keithsce 3 жыл бұрын

I have 4 zones. Can I add one of these for each zone? Also, can you program a heating schedule on these thermostats?

@D3monicBlaze 2 жыл бұрын

This is a long shot - but my previous thermostats had W1 and W2 jumped, single wire for W. Does this one need a jump, does white go to 1 or 2? It's a all in 1 unit for a mobile. Made in 2017 for Florida, I think it's just a heat pump.

@BReismiller 3 жыл бұрын

Great video. You mentioned Something about the RC connector as you didn’t have that wire, did you just leave that unconnected? That was the only part that was unclear to me.

@Remodelaholic 3 жыл бұрын

Yes I left it unconnected

@babygamer405 2 жыл бұрын

I have a Honeywell T6 zwave model and this model is not wifi. I need a wifi thermostat and I'm thinking about getting the T9 as a replacement. I also read in other places that the T6 and T9 uses the same connection back wall plate therefore I should be able to just pop the T6 face out and put the T9 face plate on, a plug and play installation. I will update once I buy the T9 next week. Thanks for going thru the phone setup for the T9.

@Remodelaholic 2 жыл бұрын

You are welcome! Thanks for watching and good luck.

@maynarkj Жыл бұрын

Did it work? I need to do the same thing.

@babygamer405 Жыл бұрын

@@maynarkj No, when I pop in the T9 face plate, it did not work. I then replace the T6 pace plate back on and it did not lit up. I thought I was screwed. So, somehow I short circuit the system. I went to the basement and open the furnace panel and reset the entire furnace, came back upstairs and the T6 was reading again. At this point I was back to square one. This is how I got the T6 to work using my phone app. I have a ring alarm system and I found out that the T6 don't have wifi but it can be connect using the Ring app thru Z Wave. All I did was open my Ring app and added a thermostat to the Ring app and Bingo, it connect to my T6 thru Z Wave. There is nothing on the internet or KZfaq showing how this works that's why I thought that I needed a wifi thermostat. It turns out I didn't need a wifi thermostat, I just need to connect to the T6 using the Ring app. Hope this help.

@21anthem12 3 жыл бұрын

How do you get the schedule function to appear in the ap? All I can get is the + sign

@Remodelaholic 3 жыл бұрын

Have you linked it?

@SethWinkleman 4 жыл бұрын

just wondering when you hook up the sensors in the other rooms in the thermostat is set in one-room does it adjust the temperature so that the other rooms are at that same temperature?

@magictrick8833 4 жыл бұрын

Yes. Or you could make one or more of the sensors the primary. 10x better then nest weird sensor setup

@rgruenhaus 4 жыл бұрын

It would chill down or heat up the whole house to match the temp you set in that room where the primary sensor is.

@rgruenhaus 4 жыл бұрын

@@magictrick8833 better THAN

@fhoneman 2 жыл бұрын

I got mine all wired up and the thermostat does not show the option to cool just heat. What's the deal with that

@swpender 3 жыл бұрын

What did you do with the R-RC jumper?

@Remodelaholic 3 жыл бұрын

I dont remember having that.

@carloscarney8471 3 жыл бұрын

I was wonder too there is a jumper on the old one

@WillandboninayTv2536 Жыл бұрын

I have the same thermostat just installed and perfectly working but when i turn on the force air it shit off. What maybe the cause,if you can help?

@Remodelaholic Жыл бұрын

Not sure I just followed my situation.

@luismiranda6906 4 жыл бұрын

How i would calibrate the thermostat? Mine is 20 degrees below the actual Temp and honeywell reps does not answer. I am not using none of the smart sensors since didnt came with any. Just only the display with c-wire.

@Remodelaholic 3 жыл бұрын

I'm not sure. I plugged mine in and it worked just fine. Not sure what it could be?

@timjoseph887 3 жыл бұрын

Important to mention turning off your main power?

@JeanPierreWhite 2 жыл бұрын

He did turn off the furnace so there was no power to the wires. He said that at the start of the video.

@neilpritchard4734 Жыл бұрын

wish you would've showed us how to tell if we have a C wire...on to the next vid

@ABC-wz2db 3 жыл бұрын

Please set up the wireless sensor

@thewallstreetjournal5675 4 жыл бұрын

Hi - Can this thermostat give alerts to a phone. when I am away from home?

@Remodelaholic 4 жыл бұрын

Yes

@Ryan-hv4ys 5 жыл бұрын

OK this clears it up a little but of course my HVAC and current thermostat are not like this. Trying to install a Honeywell RTH9585WF1004. Please help: HVAC: COM: with a white wire going to it W: with white wire going to it Y: with a yellow and red wire going to it R: with a red wire going to it G: with a green wire going to it and a loose Blue wire not attached to anything Current Thermostat: G: With a Green wire going to it RC: with a Red Jumper going between it and RH RH: with a Red wire and the jumper to RC Y/O: with a yellow wire going to it W/B: with a white wire going to it Y1: with nothing attached And a loose Blue wire not attached to anything.

@rgruenhaus 4 жыл бұрын

Would have liked a closer look at the wiring as you connected each one. You didn't mention what to do if there is no C wire!

@Remodelaholic 4 жыл бұрын

Thanks for the feed back. I didn’t think to mention the option of no c-wire because mine had one. Thanks for watching!

@Ali-jh3xk 2 жыл бұрын

Hope this helps: I pulled out my wire bundle from inside my wall and found an unused wire coiled around that wire bundle. I wired that to C on my stat. Then i went down to my furnace and found that same coiled wire around my wire bundle. I wired that to C as well on my furnace board. If you don't have the unused wire, the stat does come with a "C-Wire Adapter". I never used it though because I was able to find my extra wire so I can't offer advice on that

@Hades16899 3 жыл бұрын

So I almost have the exact same from old to new thermostat setup but my ac isn't coming on I can't figure it out

@Remodelaholic 3 жыл бұрын

Not sure. You might need to call an HVAC specialist. I just followed the book.

@Hades16899 3 жыл бұрын

@@Remodelaholic I called one and he said I might have the s1 and s mixed up

@Remodelaholic 3 жыл бұрын

Well I hope you get it fixed. Sorry I couldn't be of more help.

@auhmallxo 3 жыл бұрын

My thermostat don’t show the ac it just show heat and off

@stugooden7826 Жыл бұрын

I’ve had two electricians try and install this for me. Screen doesn’t turn on for either of them. What’s wrong?

@Remodelaholic Жыл бұрын

I have no Idea. I am so sorry. I just followed the instructions for my setup and it worked. I wish I knew.

@stugooden7826 Жыл бұрын

@@Remodelaholic figured it out. Absolutely needs a c wire to work. Went with the Nest instead. Thx!

@kevinmain3399 3 жыл бұрын

you didnt mention turning off power O.O that's a critical step!

@Remodelaholic 3 жыл бұрын

Turn off power. :)

@kevinmain3399 3 жыл бұрын

@@Remodelaholic I bought this today on sale. Not blowing me away but I like being able to monitor my thermostat remotely.

@Remodelaholic 3 жыл бұрын

That is what I like most as well.

@usahoangsatruongsa 3 жыл бұрын

One honest question, does your AC system need recharge freon every single year ? please save your money for that or buying a new system.

@Remodelaholic 3 жыл бұрын

No recharge needed every year.

@dangriff8367 2 жыл бұрын

You left the Red Jumper, why?

@Remodelaholic 2 жыл бұрын

I was just following the instructions for my setup and it didn't require it.

@keninthewind6216 11 ай бұрын

Seems redundant to me to put labels on a wire that is the same color as the label says! I got the T-9 and installed it but it also came with a device for the furnace itself. And it didn't work. So I watched this video. No help here!

@Remodelaholic 9 ай бұрын

Sorry about that.

@cottojn 2 жыл бұрын

My t9 won’t discover my Fios wifi network, my internet is working and it is located in the same area about 7-10 feet away. It’s got me pulling the hair off the top of my head.

@Remodelaholic 2 жыл бұрын

Sorry I'm not sure how to help with that?