How To Build A Deck | #2 Framing [Beam/Joists/Ledger]

Рет қаралды 3,992,361

9 жыл бұрын

If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Visit www.house-improvements.com for help with your deck build. In this video, Shannon shows you how to build a deck, including attaching the ledger board, joists, beam, etc.
If you have questions about your deck or other home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-improvements.com
Facebook: / 180657245288627
Twitter: / house_improve
Video © 2015 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.

Пікірлер: 1 400

@HouseImprovements 4 жыл бұрын

Here is a link to the"Pylex" adjustable deck supports: www.amazon.ca/Pylex-12098-Support-Extendable-Black/dp/B0753NYS3R/ref=sr_1_8?crid=361U3H4OH2N5F&keywords=pylex+post+base&qid=1584890716&sprefix=pyrex%2Caps%2C178&sr=8-8

@josephbodnar9822 4 жыл бұрын

Thank you information and you quick response. But it is not the same as in the video, why?

@THOMASDRELICH 4 жыл бұрын

Look like part number 12103 and not 12098? Yours didn’t have the bolts to adjust width? Couldn’t you fill the tube with epoxy in areas where wind is a concern. I know you loose adjustability. The company would be smart to thread the base then use the nut to lock into to position creating an actual connection to the ground. Nice idea but don’t know how it meets code

@STEPHENCURRYGREATESTSHOOTER 4 жыл бұрын

From the beam how many inch is the over hang. Thanks

@mauricesize12 4 жыл бұрын

HouseImprovements Would I need an xrtra brace if my deck span is 16 feet? Or can I use 2x10x16 for the floor joist.

@gianfmm 3 жыл бұрын

¹aq

@TheNealzarka 9 ай бұрын

No fake smile nor drama, simple and efficient, no cut on mistakes and a decent video. get my like and comment you random youtuber.

@paulmayerpiano 5 ай бұрын

That's Saskatchewan for ya. Most humble and hardest working people I've ever met.

@fifthamendment1 14 күн бұрын

Three important mistakes: 1. The flashing where it meets up at the butt joint on the ledger needs to be caulked. Water will penetrate at the butt joint and eventually rot out. 2. He tore the tar paper near the downspout. That should have been repaired. 3 Finally and most critically, the concrete patio is probably no more than than 3-1/2 “ thick. My jurisdiction would have required the patio cut out and a footing installed.

@thebird135 4 жыл бұрын

I’m actually glad to see you kept in the mistake and had to redo it. It’s good to see somebody on KZfaq not edit that out. Shows even a pro makes mistakes. Softens the blow for the diyer

@JohnAranita 2 жыл бұрын

You need to eat tacos!!!

@rcytb 2 жыл бұрын

I just re-watched this video on ledgers - and several others. You're still the best! Thanks for all the education.

@tomaspesliii4618 10 ай бұрын

😂😂😮🎉😊

@I-sed-no 18 күн бұрын

Few people are willing to show mistakes. The fact that Shannon doesn't cut the video to hide the mistakes shows you the real deal. All of us make mistakes. Great video! Thank you for taking the time to share your experience with the rest of us.

@TheSkinnysmith 5 жыл бұрын

I love how you showed yourself making a mistake (45:30)!This is very important for us “do it yourselfers”. This is definitely a confidence builder. Thank you! Your videos are extremely informative. The best I’ve seen yet.

@jshepard152 Жыл бұрын

If he made one mistake, just imagine how many I'll make.

@johnlamarre7330 4 жыл бұрын

From bathroom toilet install to my deck expansion, your videos are like gold to me. Appreciate the clear instruction. I'm a big fan. Keep them coming.

@dadgad68 9 жыл бұрын

I'm a builder and i got to say you do a fine job in your presentation. Great tips and very informative for the viewer. Great job.

@screamingchickenshoppingne2390 3 жыл бұрын

i agree

@christelting1359 3 жыл бұрын

A mild mannered one man machine. I appreciate the no rush pace. You include the one man tricks of the trade. And show your mistakes.... Subscribed...

@SultanofSpey 3 жыл бұрын

The best instructors are always even tempered, deliberate and purposeful. Never a wasted word or movement. Thanks!

@kingaarons 5 жыл бұрын

I'm only 34 minutes in and usually I rip through these to catch the broad strokes... I've watched every minute of what this guy has presented. Excellent and comprehensive video, easy to follow and thoroughly illustrated. Thank you for taking the time to share your craft Sir!

@ronlaverdiere 3 жыл бұрын

With all the videos I have watched for building a deck, you are probably the only one that actually mentions treating the cut ends on every piece of wood. Thank you for this!

@HouseImprovements 3 жыл бұрын

Glad it was helpful!

@larryjohnston929 Ай бұрын

You sir are the Bob Ross of how to videos.

@MilosStevanovic1 3 жыл бұрын

I literally build everything in and around my house by watching your videos sir. From bathroom, to doors and windows, to shed and now deck. Thank you.

@HouseImprovements 3 жыл бұрын

That is awesome!

@joemadrid8331 3 жыл бұрын

This is one of the best renovation channels out there. I'm about to build a 30'x8' deck for a customer. Videos like this one here are a gold mine! From Norway, thanks a ton Shannon! You are appreciated man!

@Ishkatan 2 жыл бұрын

I love that you include your mistakes and fixes.

@Elon_Trump 6 жыл бұрын

This channel is saving me tons of money. I learn here instead of paying to go to trade school. Thanks, Shannon!

@gatekeeper65 5 жыл бұрын

Then I hope you donate at least a part of what you're saving to his Patreon account ;O)

@ewad623 7 жыл бұрын

Shannon knows everything. Any time I'm looking to learn ANYTHING, I look for Shannon's videos.

@HouseImprovements 7 жыл бұрын

Thanks!

@hking4059 4 жыл бұрын

Absolutely! He is Great

@GeniusIdiot287 9 жыл бұрын

Glad to see you make mistakes. Teaches us all that even the best can goof up sometimes and to pay attention to detail. Appreciate the authenticity. Keep it up.

@mauriceryton 4 жыл бұрын

Finally a deck frame built and installed properly on KZfaq. Great job, proper lumber dimensions used with a grade beam. Very refreshing to see.

@HouseImprovements 4 жыл бұрын

Thank you very much!

@claudelory1473 11 ай бұрын

Shannon, I love your presence, you are great. Thanks for all you do. Blessings upon you and your family.

@Noahsoak 5 жыл бұрын

I love these videos. Shannon you're well spoken and concise. Great instructional videos!

@gsh319 5 жыл бұрын

You do a great job at teaching Shannon. I've built my share of decks but I'm watching your video anyway looking for any new info/materials, and tricks. GREAT job madman. Regular guy doing solid work, hats off to ya!

@steviegibson5847 3 жыл бұрын

I know this is 5 years ago but I need to tell you that your video is one of the clearest and concise videos about decking, and i've watched a lot! Nice to see a few wee mistakes too - I think that stuff only happens to me! 😆 Many, many thanx for your marvelous video.

@rhroney1 Жыл бұрын

Dang, this guy has experience and is detailed in his explanation

@IBEWelectronut 7 жыл бұрын

Made it to the end. Very thorough video. My Dad was a carpenter; I am an electrician. lol. I wish I'd have paid more attention to my Dad's craftsmanship back when he was alive. But thank you for your instructive videos; they really helped me hone up on some forgotten knowledge I had. I have a new house that I will be installing a 10' x 20' deck on with a handicap ramp for my mother-in-law and brother-in-law. Thank you and God bless.

@snoopydogg796 5 жыл бұрын

Also flashing should be under the tarpaper

@chrisarksey 9 жыл бұрын

Every time you film a video and you think damn this is taking a long time...remember how much time you're saving every viewer by not making mistakes and being able to plan properly.

@jasonschofield37 5 жыл бұрын

he shows how to fix mistakes which invaluable.

@johnhowardnardine6815 2 жыл бұрын

This video series (see all 3) is THE authoritative source of expert information that made my deck build possible!!! There is so much noise and misinformation on KZfaq, half-baked, and downright dangerous "expert" advice on deck building techniques. Shannon's is the real deal. Of course, you will have to supplement with other videos to adapt to your own deck building situation, but these 3 videos from Shannon have all the core knowledge you need to DIY, even if you are a complete novice like I was.

@frederickb74 Ай бұрын

This is my guy. Just a real dude. Official Tissue.🤙

@jimmylove713 4 жыл бұрын

I like this guy, I learned a lot from him, he explains things step by step, he is a professional, 👍🏻🙏💪🏻👍🏻

@done-ManJustLivingLife 5 жыл бұрын

I'm building a deck and find your videos really helpful. Thank you!

@Cat.Con-Makp 27 күн бұрын

I've watched this video several times and learn something every time, also built some awesome decks, thanks Shannon.

@lonniewalsh6056 3 жыл бұрын

This guy is as good as I have been, in the past. I'm now 75 yrs. old, and enjoyed my earlier years very much.

@deborahwood694 4 жыл бұрын

Love how you explain WHY ... being a very visual learner and not even close to memory oriented LOL why is critical to me. Great videos!!!

@cycle007 5 жыл бұрын

Thank you Shannon...we have been considering a deck for about 20 years...I have received some pricey quotes over the years and you finally gave me the confidence to complete one myself...my wife wanted it big...turned out to be 24 x 16....took me several months working alone but it was well worth it! Cheers.

@yoooo3231 2 жыл бұрын

Months 🤔 3 days Max

@Mark-nu5vg 6 жыл бұрын

I like how slow and detailed your vid is very easy to follow for people with no knowledge of building. Thank you.

@robertesposito9871 7 жыл бұрын

I feel like I can build a house after watching his videos, he's very thorough

@HouseImprovements 7 жыл бұрын

Thanks Robert

@marjonaguila1112 3 жыл бұрын

Hi Shaun can i get tip to do frame deck 12×10 and 2feet high ftom the ground

@davidbooher5559 2 жыл бұрын

Me too. Almost

@on-targetpropertiesllc4841 7 жыл бұрын

1/4" out of sq. before adjustment? Very nice! Excellent video, thank you for putting it together and posting.

@WildCast2000 5 жыл бұрын

Wow! As a teacher with little carpentry talent, you explain things SO WELL. You are very clear and easy to understand. You give a guy like me great confidence to tackle anything. Thanks so much.

@brucey1905 6 жыл бұрын

These videos are excellent for the step-by-step process that is easy to follow! Great advise & saving potential building errors! Thanks Shannon

@TheLkvoice 9 жыл бұрын

One of the best Home Improvement channels out there. Well explained as you go along step by step, in terms all can understand and discusses the simple issues you may come across as you attempt the same project. Nice one Shannon.

@jamedonovan3555 9 жыл бұрын

This HOWTO is so well put together. Thank you for making and posting it.

@patrickknowling1796 7 жыл бұрын

Check out these great woodworking plans here: HootWood. com

@magdantallis7513 7 жыл бұрын

Jame Donovan oi

@tomgao7574 8 жыл бұрын

Great Video, never feel too long. Thanks.

@naturetune697 2 жыл бұрын

Best instructor on you tube 👏👏👏

@EraBoyz 9 жыл бұрын

Shannon your awesome I watch a lot of your videos. I recently purchased my first home, and do all the work myself with the help of your videos. Im interested in redoing my deck so these videos are key.

@HouseImprovements 9 жыл бұрын

***** Thanks Alex! Glad to be of help. Please feel free to use our forum as a helpful DIY tool as well. Please spread the word of our helpful information. www.house-improvements.com/forums/

@solangemorissette2786 7 жыл бұрын

Alex Flores and hybrid b

@southernlifeforme 6 жыл бұрын

Alex Flores I

@charleschi843 2 жыл бұрын

45:32 Mad respect for keeping the blooper in the video. We have all been there my friend.

@michaelalvin86 5 жыл бұрын

Appreciate the videos...I finished my 12x20 deck this time last year and will finally get to enjoy it since I redeploy this week. Thanks for being so thorough.

@ongta1265 4 жыл бұрын

45:30 I love the honesty, love this guy, learned a lot from him when I remodeled my shower. 👏 👍 🙏

@JSTX9216 4 жыл бұрын

One of the best tradesmen on KZfaq. I love his channel and videos.

@davidbooher5559 3 жыл бұрын

I’m subscribing just because of this.☝️ He keeps it real. Plain and simple.👍

@andyprairiedog4829 Жыл бұрын

This is a great series. You're great at presenting this information, reasoning and demonstration. My first deck project (24x36) is a bit more than I could chew. Attended more "KZfaq University" and am learning more amd more. End result, I over killed some areas. Thank you for showing this, Shannon. You and the Crew rock at this information.

@GoodwillCriminalsOfDallas 9 ай бұрын

Well look at it this way, it is always better to do more than less. I use brushed-on Titebond glue on all exposed joint ends.

@5400bowen 2 жыл бұрын

People who don't make mistakes....are people that don't do anything. Nice shirt, nice hat. Nobody thought the video was too long. But some of us thought it was too short. Take your time. Your content is well worth even twice the length.

@terrycarter1061 11 ай бұрын

Best videos on KZfaq by far. Thanks man 🍺🍺

@peaceandloveonearthandmars 8 жыл бұрын

you make really great vids! no one hand vids!

@cwhussey5432 9 жыл бұрын

what do you mean "hope you" stayed until the end.... Couldn't take my eye off the screen.... I really do like your videos and use the Knowledge you share regularly.... thanks for all you do....

@Reneivan 8 жыл бұрын

I was searching for roll roofing videos and ended up watching the entire video. Shannon you're awesome!!!👍

@patrickknowling1796 7 жыл бұрын

Check out these great woodworking plans here: HootWood. com

@Factory928AC 6 жыл бұрын

When he said that I was like. I stayed ....lol ... his glasses tho. When he forgot to put them on I was waiting or the camera guy to whisper " your glasses".

@jfkr77 2 жыл бұрын

Your one hard working knowledgeable guy

@joeesp9360 6 жыл бұрын

Awesome instructor. Its great that you never fail to mention all the little tricks of the trade that come with experience. Great videos! please continue, always learning something new from you.

@SEBTECHDIY 5 жыл бұрын

Greats tips, im building my first deck ( 10x14 ) in one month, i can't wait, will be a fun project!!! Thanks you 😆

@jimg7318 4 жыл бұрын

Love your videos. Here in Illinois we get several inches of snow so we usually build the deck down the height of a normal step( about 6 3/4 inches. I do this because I have yet to find a fool proof way to keep snow from weeping under the door. Flashings doesn’t work under the door sill. Do you have any ideas. Thank you. Your work is excellent.

@LarryDoolittle 9 жыл бұрын

Great work. I would sure want you to build my deck. I am sure you are proud of your skills and work ethic. First class!

@thejawshop-AdventureRecording 3 жыл бұрын

After watching this I have made informed decisions. Great

@kevinbattersby8696 6 жыл бұрын

Shannon you are the man! Love how thorough your videos are for beginners like myself. Thank you so much!

@riverraisin1 6 жыл бұрын

I like that you don't edit out your mistakes. Chances are we will make the same mistakes when building our projects and we were able to see how you corrected them. BTW...what do you take to go in "Speedy Gonzales" mode? I'd like some of that too :)

@kylelove927 5 жыл бұрын

*Before you hammer your wedge bolts into the concrete!* Put them through the bracket and add the nuts so they don't fall off and *THEN* put them into the holes and hammer them into place. You won't have to bother with popping them sideways to fit by doing this. ❤🇺🇸🦅🔥

@thecountrycarpenter1816 6 жыл бұрын

I was simply watching this for my entertainment.i greatly enjoy the technique you used to put that together and there are some very smart methods thrown into it. Great work man!

@catdash4390 Жыл бұрын

A 1/8 of an inch out of square? 😣😂😂 Like me, you are a perfectionist! Great video!

@ou812huh Жыл бұрын

My measurements are tight as a frog hair split four ways..🐸

@jerrodbridgef1417 4 жыл бұрын

These contractor is a real Professional,he breaks things down throughly everybody is different as long as your going by code, and he those Lol he's name should be Code lol,that's how good he is

@giaanchow7417 2 жыл бұрын

You are a great teacher! Your instruction makes everything easy to understand. I feel so confident to tackle our project now! Thank You!

@HouseImprovements 2 жыл бұрын

You are so welcome!

@MrAdamcarlton 2 жыл бұрын

You mean the professionals even make a mistake... Kudos to you for keeping it in the video

@travisbosco8469 2 жыл бұрын

This is an excellent and very educational video. Most project/construction/DIY videos leave out the details and just skip to the major steps, but the details are the most important things to know! Looking forward to watching the rest of this series.

@HouseImprovements 2 жыл бұрын

Glad you enjoyed it!

@red03golf 4 жыл бұрын

I like everything you do except for the lack of pre-drilling. I feel, in a situation such as this, even though a manufacturer may say it's not necessary, the importance of mitigating stress within the board outweighs the convenience and speed of driving them straight in with no pilot hole, especially in drier dimensional lumber. As you're well aware, lumber loses much of it's strength as soon as it develops a crack or split. As for the flashing, perhaps a bead of construction adhesive on the top edge of the ledger board would be effective to hold the flashing in place so the main sections don't move and the splice doesn't slide laterally from its location. Great job with your explanations; I really appreciate your ability to convey key information to the layman - a true teacher.

@johnvcougar 2 жыл бұрын

Agreed! What's with tradies and their antagonism towards pilot holes and pre-drilling? There are VERY SOUND Engineering principles to warrant drilling, so that the damn things last a whole lot longer ... wait ... there's a clue, right there. Hmmmm.

@laser31415 8 жыл бұрын

I like that you didn't edit out the rim flip. "been there done that"

@HouseImprovements 8 жыл бұрын

Thanks

@TrapHunt 3 жыл бұрын

Best deck building instructional video on KZfaq! Thanks for actually showing everything you're explaining.

@michaelarthur6271 4 жыл бұрын

What! A nail in a joist to hang the nailgun on? BRILLIANT! Thank you, Shannon & Co., your videos are Top Notch.🤗

@wilsocn 8 жыл бұрын

I bet Canadians love that one day a year that it is warm enough to wear shorts. I kid, I kid. Nice video.

@JeffTheFarmer365 8 жыл бұрын

We have pretty warm summers here usually. 21ish Celsius every day.

@wilsocn 8 жыл бұрын

+Randy Bobandy That would be around 70 degrees in F which is just about the perfect weather. I live in the southeastern part of the US where you never know what kind of weather to expect. It was nearly 70 in late December this past year and 13 inches of snow on the ground a month later.

@JeffTheFarmer365 8 жыл бұрын

+wilsocn it was 15° on Friday and -15° today and 2" of snow. unbelievable

@jeffalley4417 7 жыл бұрын

bruh, it's December 29th in Louisiana and I've been wearing shorts since April

@chrisverville6327 7 жыл бұрын

I believe this was on a Wednesday!

@nailzandscrewz3606 3 жыл бұрын

I changed from the FM Lags to the Simpson SDWS -no predrill, smooth flat washered head that don’t limit where I place my joists. Check em out. Cool vid 😎

@myuellchew1487 3 жыл бұрын

thank you so most for tip Simpson lag screws is the best and quicker

@truecrimejungle 6 жыл бұрын

I fucking love shannon, he's not perfect but he's definitely a guy you want working on your house.

@truecrimejungle 6 жыл бұрын

holy crap that was frustrating watching the post base bracket not go down, I would hace switched to a sledge hammer and golf drove it into the neighbours yard.

@NickSmith-hv9zi 3 ай бұрын

Oh man, i love these adjustable legs. Much easier to install and likely last alot longer. Thanks for sharing this install. Very well done and explained.

@p.macomber6901 Жыл бұрын

I found your video and used it to extend my deck by 5 feet. Can’t tell you how much I appreciate your video. You’ve saved me thousands of dollars in learning how to do it myself. So thankful.

@HouseImprovements Жыл бұрын

You are so welcome!

@Samibz 9 жыл бұрын

Hate to be one of those people but those joist hangers are designed to have longer screws/nails in the 4 diagonal holes. That is so the screw/nail penetrates the joist as well as the framing member the joist is being hung on, in this case the ledger board.

@xl000 6 жыл бұрын

whatever

@larrys5733 6 жыл бұрын

He’s right though. 2.5 inch nails in the diagonals, 1.5 into the face

@Neo-bq6vt 5 жыл бұрын

Good point. Thanks for pointing that out!

@A-bone 5 жыл бұрын

xl f u he’s correct

@chrishawkins5808 5 жыл бұрын

Do any of you have any manufacturing spec to share Where I am we have joist hanger nails. (Heavy duty galvanized. But short) They have a number on back 10 for 2x10. 8 for 2x8 and so on. I'm sure you all know what I'm talking about. But if you don't have the right number and one in every whole Will not pass inspection! They don't accept any other fastener!

@douglasssnook8664 8 жыл бұрын

Would this be a good time to consider adding electric power. When I did my last deck I didn't run power and regretted it later. If you know you will be using outdoor lighting, or other electric you may want to consider rough wiring at this point.

@cycle007 5 жыл бұрын

I just finished a deck and went with solar lighting....real easy setup too.

@Raisthlin 8 жыл бұрын

Im a carpenter myself but never made a deck. Im building one next month. Best video on how to build a deck ever. Your quite talented as a mentor.

@HouseImprovements 8 жыл бұрын

+Raisthlin Dom Thanks

@luptonpittman6520 2 жыл бұрын

You explain things superbly

@hawkesworth1712 5 жыл бұрын

Did I miss some essential ingredient in snapping a stringline before he cut the joists to length?? The stringline was straight but how did he know it was parallel to the other end of the joists. Theoretically, you could snap a stringline that would be straight but the deck could end up a triangle.

@skinnygumbo2700 5 жыл бұрын

I was thinking about the same thing. Probably he has a very good eye.

@stephenbanks8754 5 жыл бұрын

hawkesworth1712 556

@aforeffort747 8 жыл бұрын

Great video! One thing, joist hangers need longer screws or nails in the angled holes! 2-1/2" minimum according to Simpson strong tie! Most common mistake everywhere! Almost all pros make this mistake!

@brewsterly2927 5 жыл бұрын

There are two different types (and 2 different trains of thought), one bracket accommodates angled screws, the other screws in at 90.

@jacobcarlson1967 4 жыл бұрын

The value of what you do for us is absolutely priceless thank you thank you

@huideyin4774 6 жыл бұрын

Shannon's videos are always very helpful for house maintenance, thank you so much for sharing.

@PaulLadendorf 7 жыл бұрын

A minor correction. Those aren't lag bolts. They're lag screws. I mention this because if you ask for lag bolts at your home supply you'll end up with the wrong fasteners and they will probably ask you if you want nuts for the bolts.

@HouseImprovements 7 жыл бұрын

ok thanks

@dareisnogod5711 6 жыл бұрын

nuts & washers.

@yousircantknow8987 5 жыл бұрын

They are lag bolts for sure. The hardware that came with my lumber has a box of 5/8" lag bolts for the ledger.

@smellywetdogturd 5 жыл бұрын

Correct they're screws, and you need some time out doing something other than scrutinizing deck fasteners

@cuckoldawife 5 жыл бұрын

Looks like a 6 inch ledger lok

@kamekazi1123 8 жыл бұрын

this guy is no Larry Haun hahaha

@briannabaillie6760 7 жыл бұрын

lady Jonah

@patrickknowling1796 7 жыл бұрын

Check out these great woodworking plans here: HootWood. com

@phillipmccarter7471 5 жыл бұрын

No hes not but he is a good skilled carpenter and is very thorough.

@KingCrocus 2 жыл бұрын

I built my shed following you guide it came out beautifull Thank you.

@harshantube 4 жыл бұрын

Shannon is the BEST!! Wow- Doesn't miss a single detail.

@raskel71 9 жыл бұрын

I really appreciate that you admitted a minor mistake, now I'm a total fan of yours. I like honesty.

@47ronin61 7 жыл бұрын

Your vids are easy to follow, I enjoy how you talk to people and not at them, that's what makes it enjoyable to watch & learn from.

@toddspires603 3 жыл бұрын

It's like you are sitting there talking directly to us.

@chrisjones4257 Жыл бұрын

Definitely the easiest video to follow

@smith45acp 7 жыл бұрын

You take all the extra care that separates quality workmanship from average. And I appreciate all the details and tips that you remember to mention. A lot of instructionals take for granted that everyone knows these things. Great work and awesome video! Thank you!

@HouseImprovements 7 жыл бұрын

Thanks for the kind feedback.

@richardsilva-spokane3436 11 ай бұрын

Excellent video. Very thorough and coherent 👍👍👍👍

@BobTheSchipperke 3 жыл бұрын

Shannon is my favorite home improvement guy. 💥

@RickSaffery 7 жыл бұрын

Your videos are great. I think this is because you have a nice conversational style, easy to follow pacing and you stay on point. Thanks for sharing.

@eliyahkilada338 3 жыл бұрын

Excellent. Yes, I kept watching for the entire hour. I appreciate all the details!

@denhouse1 9 жыл бұрын

Thanks very much for posting this series. I'm replacing a deck so the foundation work has been done, but I love all the tips and information that you are sharing for the decking and framework. Very nice

@marcelagarciaaraya1992 4 жыл бұрын

Kppnonm0bn00n0 np

@dennism1989 9 жыл бұрын

This guy is a master at his craft. Everything he tackles ends up looking like gold!

@trollnapf1670 3 жыл бұрын

My favorite construction channel strikes again with a great video.

@eddiejanekjr6381 10 ай бұрын

Thank you so much for the video and wanted to complement you on being thorough and succinct. Definitely a great start for learning how to build not only a deck, but attaching it to the house and eventually setting the posts.