How To Reprogram Keypad For Garage Door Opener

Рет қаралды 954,947

4 жыл бұрын

If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Shannon from www.house-improvements.com shows you how to reprogram a wireless keypad for a typical garage door opener (GDO).
Amazon affiliate link to garage door opener products: amzn.to/31YtyTc
If you have questions about your home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-improvements.com
Facebook: / 180657245288627
Twitter: / house_improve
Video © 2019 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.

Пікірлер: 232

@a.evansrn107 Жыл бұрын

What happens if you don’t have a enter button ?

@raykohnert2588

I spent a minute and a half reprogramming, (most of it climbing a 15 ft ladder),but probably 20 minutes looking for a simple, quick, to the point video like this one. I don’t know why there are so many long winded videos for something so simple.. Thanks

@thesaxist02 3 жыл бұрын

Works like a charm. Keep in mind that you must firmly and slowly press the numerical buttons one at a time (on my model at least).

@patriciacuozzo359 Жыл бұрын

I found the learn button

@majwhiplash358

No luck for me. I had to call my repairman who is coming out. Everything I've seen is easy to do so when it doesnt work there is something else wrong and I know its not the batteries which are new. I'm guessing maybe the coder function basically died. Almost guessing the cost to fix or replace that might just make a new opener the best option. Will update on how they fixed this if they did so I can pass it on.

@loribarham6361

Be careful and check the old codes. I've been changing mine this way a few times and recently found out it just programs a new code and doesn't erase the old codes. So all of the old codes still work too.

@patriciacuozzo359 Жыл бұрын

I'm having a problem reset the keypad, my dad changed the battery.i found the learn button.

@bulldogms 14 күн бұрын

All of a sudden both my garage doors are opening with one code. Any ideas? Tried reprogramming them separately. Didn't work. It's a new Chamberlain system.

@averagejane09

sigh...I don't know how to locate the learn button on the unit with the lights in the way on both ends and I hate heights so I can not stay up there long to try to figure it out. Yours is already exposed. I wiggled the light cover and it didn't budge....which end anyway?