How To Plunge Cut Using 4 Different Saws

Рет қаралды 17,550

2 жыл бұрын

Amazon link to saws @ amzn.to/3oyo9Qi
In this video, Shannon shows you how to make plunge cuts into materials using four different saws. In this case, it's a jig (sabre) saw, oscillating saw, reciprocating saw, and circular saw.
If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
If you have questions about your home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-improvements.com
Facebook: / 180657245288627
Twitter: / house_improve
Video edited by / @rugcarpet6664
Chapters:
01:25 Saw Safety Tips
02:00 How to plunge cut using jig saw
03:20 How to plunge cut using oscillating saw
04:55 How to plunge cut using reciprocating saw
06:33 How to plunge cut using circular saw
Video © 2022 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Пікірлер: 43

@koolkevin2357 Ай бұрын

I was a welder and mechanic for 30 years. Your safety tips go a long way in refreshing good practices in my home shop. The fingers you save... May be your own. Nice to see ear & eye safety too. Thank You!

@contessa.adella 2 ай бұрын

The one I didn’t know was the Recip saw…thank you. Glad also you corrected ‘Kutzall’…it’s an American thing calling stuff by it’s established brand name, but imagine how Irked Milwaukee, Makita and DeWalt etc must feel with their tools being referred to as a Kutzall or Skillsaw. Having said that…here in UK we still ‘Hoover’ the carpet as much as ‘vacuum the carpet’😂

@samkostos4520 2 жыл бұрын

Working with power tools can be very dangerous. Tips like this are critical to safe operation. These kinds of videos literally save lives.

@mikechiodetti4482 2 жыл бұрын

Thank you for the info and I'll keep this video for future use.

@TheSlipperyNoodle 2 жыл бұрын

Great video! I never thought I’d doing one with a jig saw.

@MrLitosanchez 2 жыл бұрын

Good video on how to start a cut with the different saws, thanks

@gangofgreenhorns2672 2 жыл бұрын

Did the first circular saw plunge cuts of my life yesterday while building a chicken coop door lol, went great. Used your metal shed roofing video a lot for reference too, so thanks for all the info.

@HouseImprovements 2 жыл бұрын

That is awesome!

@1hjehje 3 ай бұрын

An excellent video ... Thank You!

@tonym6920 2 жыл бұрын

Thanks Shannon! 👍👍

@dadokrstic 2 жыл бұрын

Great vid!

@vernessalkic1065 2 жыл бұрын

Great video!

@robertlafleur5179 Жыл бұрын

Oscillating saw, now you own 3. You can never have too many tools!

@MrWhitelightning73 2 жыл бұрын

Excellent advice

@HouseImprovements 2 жыл бұрын

Glad you liked it

@tawnihaynie1065 2 жыл бұрын

Cool. Thank you. 👍👍👍

@ronm6585 2 жыл бұрын

Thank you. 😊

@Maxid1 2 жыл бұрын

1:35 I installed some cat 6 into a wall from underneath that prevously didn't have a data jack. I continue to fall in love with my multi tool (oscillating saw). I'm cutting blind into a wall that has power, gas and who knows what else, but with that multi tool I can just cut the depth of the drywall and knock the piece out to see what's behind it. Best tool ever!

@stephengonzales3276 2 жыл бұрын

Thanks for sharing

@HouseImprovements 2 жыл бұрын

You bet!

@rzh3443 2 жыл бұрын

Very helpful and timely for me. Off to use this technique with a sawzall .

@HouseImprovements 2 жыл бұрын

Perfect!

@simonrizk4451 10 ай бұрын

nice!

@tomekc1113 Жыл бұрын

You got a thumbs up :)

@sannelambert579 Жыл бұрын

That was awesome! Tvm

@robertgiresi9515 2 жыл бұрын

Thanks Shannon. I'm surprised you didn't mention that when plunge cutting using the circular saw and you're cutting out a rectangular piece, when the 2 lines of the plunge cut meet at the corner, because the blade is round, while the cut meets at the top of the material in the corner, they should also know that it's still not cut at the bottom of the material. You will then need one of the other saws mentioned in this video to finalize the cut all the way through.

@HouseImprovements 2 жыл бұрын

Great point!

@HouseImprovements 2 жыл бұрын

We have another video specific for cuts with a circular saw that is more detailed. kzfaq.info/get/bejne/j8yFa7h2r9y9knU.html

@robertadriver6931 2 жыл бұрын

Interesting

@gth042 2 жыл бұрын

Great tips, thank you! The plunge cut lesson was good too :D Cutting twice with the oscillating tool shows how much you really enjoy it! Got mine last week and I think I've got the hang of it. Ability to shape custom blades (hook shapes) is really handy, as is variable speed. Enjoy the spring!

@drewpierce2273 2 жыл бұрын

That is a nice work table you used. Is that cloth covered or just the paint look? Very good advice on plunge cutting. The saber saw plunge is something I never tried. I usually drill a starter hole.

@HouseImprovements 2 жыл бұрын

Just a painted plywood top

@jmwoods1428 2 жыл бұрын

👌 👏 👍

@My-Say 2 жыл бұрын

My circular saw blade never stops that fast on my Craftsman. What company is that from? I need to do some plunge cutting in the concrete of my basement to deal with some water issues. The house is over 100 years old, built into a hillside, and water always gets in when it rains, Some comes in through the cement blocks and has been discoloring them. I think I need to tar the outside of those and also install a sump pump. I think cutting a line around the perimeter that leads to a sump hole will work fine for when it does get in.

@HouseImprovements 2 жыл бұрын

This was a Milwaukee saw. Many have brakes now.

@aafehler 2 жыл бұрын

I was the 306th like - SK shoutout!!

@kansasfan649 7 күн бұрын

If you're doing a plunge cut in 5/4 cedar boards, and only want to cut out one board without cutting into the adjacent ones on each side, which saw works best ? One video I watched used a plunge saw and finished the edges with a reciprocating saw, but I hate to buy two saws and the rental fees are high. Great video and thank you for stressing safety tips.

@HouseImprovements 6 күн бұрын

Oscillating saw if your only buying one saw.