How 5.0 Coyote Engines Beat LS and LT😮 | Explained Ep.2

  Рет қаралды 576,218

337 SPEED

337 SPEED

Жыл бұрын

Follow the build here:
/ 337speed
/ 337speed

Пікірлер: 1 700
@shippybs
@shippybs Жыл бұрын
Every trick in the book. DOHC, DI, VVT, super high rev, high compression and multi valves. It is quite the piece! I’m a Hemi guy but you have to give credit where it’s due.
@ancientalien5752
@ancientalien5752 Жыл бұрын
as much as i really like the hemis they have all that power but so much weight. great cars high power just a little on the heavy side
@rayzee7561
@rayzee7561 Жыл бұрын
That much out of a 5.0, it's bad azzed.
@frenchonion4595
@frenchonion4595 Жыл бұрын
It's nothing special. The Europeans and Asians have been doing DOHC and VVT for years
@rayzee7561
@rayzee7561 Жыл бұрын
@@frenchonion4595 Yeah, but they not getting 500 HP out of their engines.
@frenchonion4595
@frenchonion4595 Жыл бұрын
@@rayzee7561 Because they are mostly 2 liters but the horse per liter has always been there
@CrazyChiefXxX
@CrazyChiefXxX Жыл бұрын
My old gearhead dad always told me the secret to any V8 is in the heads. Getting them to breathe is what helps them turn out high power and RPM. If you've ever noticed a coyote torn down it's actually a very small block with very huge cylinder heads..
@ssj2camaro21
@ssj2camaro21 Жыл бұрын
Yeah by default not by design. Of course a 2 cams in a head require a bigger cylinder head that a cam in the center of the block.
@Ruby5.0Mustang
@Ruby5.0Mustang Жыл бұрын
​@@ssj2camaro21 also I specialized in ls builds and a few coyote engines
@davidgraham7325
@davidgraham7325 11 ай бұрын
By design redneck
@codejunki567
@codejunki567 9 ай бұрын
The heads are huge because the cams are in the heads lmao
@droman608
@droman608 3 ай бұрын
A wise advice.
@attananightshadow
@attananightshadow Жыл бұрын
Well, I have a bone stock 2012 coyote; it just rolled 306k and apart from plugs, nothing has ever come out/off of the motor. Only uses .5 quarts of conventional oil between 5K changes. No complaints here. Id get another one once it dies.
@BadgerGT500
@BadgerGT500 Жыл бұрын
306?! Damn that’s awesome
@Bendejo6517
@Bendejo6517 Жыл бұрын
I have a 2013 bone stock as well and it’s 110k miles I never dog on it or anything and it runs amazing. Hopefully lasts me over 220k
@guthrie_1
@guthrie_1 Жыл бұрын
Miles or kilometers?
@sntslilhlpr6601
@sntslilhlpr6601 Жыл бұрын
Almost 30K miles per year? Holy shit that's a lot of gas money lol.
@TheNewAgeCreater
@TheNewAgeCreater Жыл бұрын
​@@sntslilhlpr6601 mf is racing for cash or is really using the mf as a daily😮
@JDpewpew
@JDpewpew Жыл бұрын
The second 2011 hit, and I saw Ford was releasing a 5.0 again, named a dang 'coyote' I wanted one immediately. I grew up, got a job and got a 16 GT last year, I'm super in love with the car. Bringing it out to 7200 and shifting just feels different and gives a new appreciation for cars to me. This is a seriously legendary engine, and in my opinion will go down in history of top 10 engines of all time; in America at least
@CJColvin
@CJColvin Жыл бұрын
Sounds awesome brother, I have a 2011 Ford F150 with a 5.0L Coyote V8 in it with 147,000 miles on it still going strong and its a beast and it sounds like a beast with the Borla ATAK exhaust on it.
@Wicked_RotF30
@Wicked_RotF30 Жыл бұрын
@@CJColvin cool. I prefer to leave the "beast performance" to cars like my BMW. My truck is for towing and whatever else I decide to do with it, but speed definitely isn't a good quality for a real truck. RAM TRX, RAPTORS are stupid. Their just pavement queens, might as well bought a car. Especially when most guys who have trucks just go MALL CRAWLING🤣
@CJColvin
@CJColvin Жыл бұрын
@@Wicked_RotF30 True mate true.
@bryanribey
@bryanribey Жыл бұрын
@@CJColvin Same here, my '14 Ford F150 has the 5.0 coyote as well and it sounds so good when you get into it even completely stock. Even the intake noise is so good.
@CJColvin
@CJColvin Жыл бұрын
@@bryanribey Awesome brother, the Borla ATAK exhaust on my truck sounds awesome brother.
@jza80king
@jza80king Жыл бұрын
I come from the Supra world (5MGE, 7MGTE, 1JZGTE, 2JZGTE) and i love learning about other engines. This video was fantastic, no biased opinion just facts and great explanation. Look forward to future videos you break down like this.
@marcelk3847
@marcelk3847 Жыл бұрын
And, do you like the coyote?
@jza80king
@jza80king Жыл бұрын
@@marcelk3847 yeah i do I think the coyote is a strong engine
@DumbSkippy
@DumbSkippy Жыл бұрын
@337Speed Australian guy here... I just wanted to say a huge thank you. I've learnt more about the various US built engines here on your channel than I have in years watching hundreds of other videos KZfaq.. Seriously... you know your sh*t and I love your videos. Much respect. - Perth, Western Australia
@hieronymus..bosch8532
@hieronymus..bosch8532 Жыл бұрын
Wish we got your barra !
@DumbSkippy
@DumbSkippy Жыл бұрын
@Michael Ramirez Yep. 2 million people in the middle of nowhere!
@WoodLox
@WoodLox Жыл бұрын
13 Caprice is the most foreign you can own and why. Holden 🦁 🇦🇺
@phantom2468
@phantom2468 Жыл бұрын
I enjoyed this lesson. I am a Nissan/Mitsubishi driver, but I was always curious about the Mustangs. The Coyote is a formidable beast. If I can find one overseas where I work, I may buy one.
@justpassingthrough3166
@justpassingthrough3166 4 ай бұрын
I have a 540hp 5.3 LH6 Trailblazer SWB. It's pretty fast and sounds unbelievable with its stg 3 cam, custom heads, and upgraded valvetrain and forged internals. 3k stall, American Racing longtube headers running to X-pipe and Spintech mufflers make it sound phenomenal. One thing I learned is there is always something bigger and badder so enjoy other people's rides and enjoy yours. We live in the greatest muscle car era ever. Its gonna be gone soon so enjoy it.
@colinw7205
@colinw7205 Жыл бұрын
Great videos on explaining the the pros and cons of tuning modern American Muscle platforms. Keep up the great work.
@ReallyStrongGuy
@ReallyStrongGuy Жыл бұрын
Coyotes definitely LOVE boost! I outrun a lot of things with a conservative setting on my blower.
@doug350zTT
@doug350zTT Жыл бұрын
Same here .. my boosted F150 breaks hearts
@jeromeocronje
@jeromeocronje Жыл бұрын
I love these types of videos. its fun to learn what makes the engines so great
@177SCmaro
@177SCmaro Жыл бұрын
You're correct that it's it's "easy mode" with a coyote that you don't have to go into the motor...until you do. If you're just slapping boost on one 500-700ish hp is pretty easy. But if you want to build a coyote for more it is a more sophisticated engine than the LS. The coyote in my drag car has vvt deletes and locked cams and let me tell you, I've gotten really good at degreeing cams when I decided to build a coyote. I also learned a lot more about things like cam timing and overlap messing around with these things then I ever did with sbc. In fact, I so fell in love with the coyote I swapped on into my old camaro 😁.
@piuthemagicman
@piuthemagicman Жыл бұрын
So cool! 🤘 Would love to hear more about your cars :) Greetings from Finland in the nordics 👋
@177SCmaro
@177SCmaro Жыл бұрын
@@piuthemagicman I have a few short video clips on my page if you're interested. I finally got around to buying a gopro camera so I should be able to post some videos of it at the dragstrip this spring. Went 10.95 at 130mph on 5psi of boost last year. My goal is low 10's this year.
@StonkeyKong
@StonkeyKong Жыл бұрын
Any recommendations for a “starter” car to build out that isn’t too expensive, but will give me experience actually digging into an engine?
@MrGlassman11
@MrGlassman11 Жыл бұрын
The LS is a better engine, period.
@177SCmaro
@177SCmaro Жыл бұрын
@@StonkeyKong Pretty much anything to your liking with a small block chevy in it - tons of different cars and pickups had them. It's a tough engine, most versions respond really well to bolt-ons, parts are cheap and everywhere, info on how to build them is everywhere. There are small block Fords and Mopars but they're a little bit less popular so not quite as much aftermarket support but still really good options. If imports are more your thing 90s civics are still pretty plentiful and have a ton of support too. Not as much power but you don't need as much in a lighter car.
@CJColvin
@CJColvin Жыл бұрын
The 5.0L Coyote V8 is definitely a beast. I have a 2011 Ford F150 with a 5.0L Coyote V8 in it with 147,000 miles on it still going strong and its a beast and it sounds like a beast with the Borla ATAK exhaust on it.
@robertkington2084
@robertkington2084 Жыл бұрын
I am a mechanic and have lots of ls and coyote engines laying around. Couple things not mentioned are cam swaps are easy on a coyote. No measuring push rod length and no need to degree the cam. Then the biggest thing I love about working on a modular engine is no accessory brackets.
@jamesgeorge4874
@jamesgeorge4874 Жыл бұрын
Explain, in detail, how lining up 2 dots, on 2 sprockets, and hanging ONE chain, is HARDER than indexing 4 chains, on 5 sprockets, with 5 different marks. Also GM did not use a degree wheel on the million + LS engines they shipped, and neither do you have to, if you don't want to. Also, dozens of cams are available in stock base circle, require zero pushrod changes. Sounds to me like despite you being a mechanic, you've never touched and engine with a wrench, and sure as hell not a Coyote. One valve cover has more fasteners to remove than the LS cam swap total. You really don't know what the hell you're talking about, do you ?
@robertkington2084
@robertkington2084 Жыл бұрын
@@jamesgeorge4874 sounds like you only play around with stock ls stuff. Put an adult size camshaft in and you start changing base circle. Put aftermarket heads on and you always check push rid length. Zero deck the block and then checking it again and ordering custom length push rods. The after that you have to degree the cam. If you think it takes a lot of time to line up a couple more dots then grab your box of crayons and your retard helmet and leave this to the pros.
@bevo5386
@bevo5386 Жыл бұрын
@MT82 Man Pedal they’re good but aftermarket cams can be a 80~HP difference on NA builds
@SuperSilvi1990
@SuperSilvi1990 Жыл бұрын
@@jamesgeorge4874 thank you I was about to type out the same exact thing. Dual overhead cams are a nightmare to clock. Most coyote guys just leave it alone until the timing chain snaps.
@jamesgeorge4874
@jamesgeorge4874 Жыл бұрын
@@SuperSilvi1990 to be fair, I've done major engine work on Ford, Dodge, and GM V8's for a long time, the new Hemi, and LS family are much easier, Ford has been on a mission to make technicians life hell since 1997. You should work on the 6.7 Powerstroke, every decision made about servicing that engine, had punishment in mind. I was a pretty hardcore Ford guy, untill I started fixing them.
@izek3732
@izek3732 Жыл бұрын
Man this video was solid entertaining and packed with info. Thanks
@Mike-dd8bd
@Mike-dd8bd Жыл бұрын
There are certain aspects that make the 5.0 better. But I still think the LS3 was the best v8 of the past 20 years. They were simple, reliable, sounded great, and can handle enough power. The newer LT series I do not like. They added all the new stuff like DI, AFM, and VVT. I would buy a 5.0L over a LT1 and do currently own a gen 3 5.0L.
@e46m54nissansr20937
@e46m54nissansr20937 Жыл бұрын
Cannot disagree with you here
@james10739
@james10739 Жыл бұрын
I'd still buy an LT over a coyote
@motorlife5239
@motorlife5239 Жыл бұрын
@@james10739 why. Coyotes flow better rev higher and make more hp without a struggle. RIGHT OUT OF THE BOX. But make sure u go the 3-2-1 method like this guy said in the video to make good hp reliably
@Texas_Road_Warrior
@Texas_Road_Warrior Жыл бұрын
@@motorlife5239 not to mention if we’re talking end goal… the ford modular platform has been in promod cars making upwards of 3000+ Hp for almost 2 decades… the LS platform is not nearly as footed at that power level and not to mention dodge and the new HEMI is basically nonexistent at that level. Not that it really applies to you and I but it’s still cool to know there’s a factory ford crank and engine block out there making 3000hp 🤣
@BluestreakF150
@BluestreakF150 Жыл бұрын
@@Texas_Road_Warrior you know nothing of drag racing by that comment.
@coltonkarges2656
@coltonkarges2656 Жыл бұрын
Just discovered this channel! Love your engine comparisons! Very well informed, and yet entertaining and not dry at all!! Love it!! More videos like these would be awesome for newcomers to the community! Or long time nerds like me who just love seeing every possible POV about the topic!
@mightywasp1258
@mightywasp1258 Жыл бұрын
in total. i will love every american v8 engine. its amazing how each brand makes there own version of a v8 engine
@beastmaster415
@beastmaster415 Жыл бұрын
Seriously... It's like pick your poison... gotta respect Ford just as much as Chevy and Dodge
@scordatura9259
@scordatura9259 Жыл бұрын
@@beastmaster415 I also really like how they each have their own character, used to be a hemi guy when I was younger but as I get older I appreciate them ls's and coyotes more since they're good at different things
@beastmaster415
@beastmaster415 Жыл бұрын
@@scordatura9259 hell yeah dude... Like that gt350... Not a person on this planet that doesn't like that sound😂
@redgator7250
@redgator7250 Жыл бұрын
@@scordatura9259 And at this point it’s pretty hard to say any engine is directly better then the other… Almost all these new muscle cars will make 800 Whp with some somewhat basic changes.
@superdave4543
@superdave4543 Жыл бұрын
Not for long. All the electric fan boys are killing V8's. Soon we will all be driving wack electric cars that make no sexy V8 noises.
@TheBullMooseChannel
@TheBullMooseChannel Жыл бұрын
Loved how in depth this is, thanks for the information!
@rhyelince8277
@rhyelince8277 Жыл бұрын
This and the LS/LT episode is really cool!! Keep it up!
@usandthagunns3922
@usandthagunns3922 Жыл бұрын
I have never been a ford guy, but that motor is one of the best ford has made in a long time.
@lordpula1193
@lordpula1193 Жыл бұрын
Well they only had almost 100 years to do it and still isn't that great compared to many others.
@usandthagunns3922
@usandthagunns3922 Жыл бұрын
@@lordpula1193 best ford motor, but as for other options available for other makes , no would not put this in anything other then a Ford.
@lordpula1193
@lordpula1193 Жыл бұрын
@@usandthagunns3922 if this is their best then that sucks because many motors take it out. I had meant many ford body chasis use gm or hemi style swaps. Only dumb people's would put a ford motor in a non ford chasis ha.
@albertocabrera1125
@albertocabrera1125 Жыл бұрын
@@usandthagunns3922 They would if they could. People dont because the engine is very big compared to a LS and way more expensive compared to a LS doesnt mean it isnt one of the best engines.
@169abr
@169abr Жыл бұрын
You hurt my Gen 2’s feelings with that MPG comment, 19.3 average MPG. Also Shoutout to my boy Frank for that racing footage.
@e46m54nissansr20937
@e46m54nissansr20937 Жыл бұрын
Can I be Frank?
@169abr
@169abr Жыл бұрын
@@e46m54nissansr20937 yessir
@CanIbeFrank
@CanIbeFrank Жыл бұрын
@@169abr that was an oldie but a goody
@169abr
@169abr Жыл бұрын
@@CanIbeFrank all the videos are goodies my man.
@jeffyeager4045
@jeffyeager4045 Жыл бұрын
I really enjoy your videos I have a 2000 WS6 with an lq4 swapped fully built etc etc. I stumbled across your videos and glad I did keep up the good work.
@brianr987
@brianr987 Жыл бұрын
Thanks for your comprehensive evaluations. Good across many engines.
@X9Z17
@X9Z17 Жыл бұрын
Ford Australia and FPV used a blown 5L in the FG and FG-X cars, and they sound delightful! They make big power with just a tune. 335kW and 570Nm in standard form, but most of us believe these numbers are understated, and are closer to 400kW, as they dyno over 300rwkW in stock form (the GT-F at least!)
@garrettchapman8170
@garrettchapman8170 Жыл бұрын
The LS platform is the most reliable, most affordable engine platform ever.. Now,can two coyote platform make more power? Yes.. It has amazing dohc tech.. But 5 timing chains make it way less reliable and more expensive.. If you gave me 10grand.. And including the cost of the engines, my LS would last longer and make more power.. Because gm has created an amazing aftermarket support system.. The coyotes are sick engines.. But Id much prefer a 6.3 Ls anyday
@wg_2022
@wg_2022 Жыл бұрын
Best review I've "EVER" listened to. Thank you.
@frankhujsa821
@frankhujsa821 9 ай бұрын
This was super clear and informative. Great job.
@kevkel33
@kevkel33 Жыл бұрын
Great video! I'm team coyote. Have had my 16 GT since brand new and now have a Whipple on it. It's a beast with the blower on it!
@granthenneke
@granthenneke Жыл бұрын
I love the sound they make at high rpm.
@169abr
@169abr Жыл бұрын
We meet again.
@granthenneke
@granthenneke Жыл бұрын
@@169abr 😀 seems that we have the same interests lol.
@169abr
@169abr Жыл бұрын
@@granthenneke both have Blue S550’s so I’d say we have slight interests
@granthenneke
@granthenneke Жыл бұрын
@@169abr yep! I just put longtubes on my car and it's totally changed the driving dynamic. Should have done it sooner
@Tchamaco
@Tchamaco 10 ай бұрын
This video earned you my SUB! Thanks for the great info
@lawrenceredden9049
@lawrenceredden9049 Жыл бұрын
Great, unbiased, content as always. Keep it up!
@josefrobbins8781
@josefrobbins8781 Жыл бұрын
Nah chief, this was a really well explained and thought out video. Father was a Chevy Man, grew up to be a Dodge/Mopar man, and learned to appreciate Ford. Right now I just love anything combustion, and badge loyalty isn't a thing anymore and grew out of that phase. I just appreciate great engineering, same can't be said for others who have their Bias. Looking forward to hearing about the Gen III/IV Hemi's. Thought I already know what's coming...price tag of a Ford, and none of the LS benefits/accomplishments. Honestly aftermarket Gen II Hemi's are a better option IMO. It hurts to say coming from a guy who loves Dodge, but I acknowledge faults when I see it. Also, would love to see a short thoughts and opinions on Ford's recent Godzilla
@josefrobbins8781
@josefrobbins8781 Жыл бұрын
@berserker406 Very true. On the bright side, swapping a Godzilla into older rigs feels more justified and gives a peace of mind.
@CJColvin
@CJColvin Жыл бұрын
@berserker406 Like make it a 7.3L DOHC 32V V8.
@lordpula1193
@lordpula1193 Жыл бұрын
@@josefrobbins8781 have you seen what hemi style non dodge engines can do? Like proline, noonan, morrison, etc etc. Hemi & Chevy style motors still whoop ford pretty much most of the time still.
@josefrobbins8781
@josefrobbins8781 Жыл бұрын
@@lordpula1193 Yep, I've heard of those guys. Sonny's and Arias are one of the greats who have experimented with the Chevy Block-Hemi Head combo, and you've got some of the greats like Brodix Chevy Blocks, John Kaase with Ford, and Keith Black for Chrysler/Dodge. So yeah I'm aware of the world of aftermarket, and the companies that build race engines. Though the topic at hand is running a stock factory block, and finding it's limitations build or budget wise, and not using a race block. A company like Proline makes just full blown race engines, and I wouldn't even call their engine based on the Gen II Hemi, and more like a tribute to the Gen II because the Proline shares no similarities with the original Chrysler's 426 aside from the 2V Hemi Combustion chamber, the use of a 4 bolt mains, and maybe the Valve cover design.
@lordpula1193
@lordpula1193 Жыл бұрын
@@josefrobbins8781 Yup so many, dart too. Sonny's is more nitrous or na based but still. Even excluding proline and most of those, chevy and hemi from factory engines still best and beat ford's engines. You have to build them but even stock for stock hemis and chevy based engines still make over 1000 hp not built. fords need to build them too otherwise they're sitting bombs. Point is whether from factory or the at the highest levels it's mostly chevy, dodge and all their counterparts. Fords is every now and then. Even then it's a ford body or chasis with a hemi or chevy swap.
@Berettadv
@Berettadv Жыл бұрын
Hey I came into this video pretty skeptical but I learned a lot and I appreciate everything you said!
@786theresonly1GOD
@786theresonly1GOD Жыл бұрын
I love the vid and the channel dude especially how u break stuff down and do comparisons keep it up and stay up !
@coolie_m240i5
@coolie_m240i5 Жыл бұрын
Love your stuff man so educational!
@daltex81
@daltex81 Жыл бұрын
the 2003-2004 SC 4.6L 4V in the SVT Cobra aka The Terminator is a damn good engine that Ford made
@SquadMane
@SquadMane Жыл бұрын
Great video! The boss302 roadrunner does come pretty much built from the factory, with the forged crank ect. Also Gen 1 are safe anywhere in the 600s, it's once you make 700+Rwhp you'll pop it. Oh and OPGS are only a issue if you're bouncing off the limiter.
@JamesWilliams-dj2bp
@JamesWilliams-dj2bp Жыл бұрын
What is your opinion on the Boss's maximum HP?
@RR550_
@RR550_ Жыл бұрын
@@JamesWilliams-dj2bp same as a Gen 2, around 800, its the transmission that will go before the engine on a Boss 302
@SquadMane
@SquadMane Жыл бұрын
@@JamesWilliams-dj2bp North of 1000Rwhp. The boss came with a forged crank, with pistons & rods. As well with boss specific cams, heads, valves, & valves springs. Gen 2 got some of these goodies, but not everything.
@169abr
@169abr Жыл бұрын
@@RR550_ roadrunner > Gen 2 Forged pistons and better heads/cams. 1000whp stock motor is a lot easier to handle on them.
@jesusstopsbullets5111
@jesusstopsbullets5111 Жыл бұрын
All you got to do is take the pistons out and gap the rings to 30 thousandths. Then they are good for 900 hp all day. The number one reason stock engines fail, while being boosted, is ring gap. Nobody bothers taking the pistons out and gapping the rings for boost. Before throwing 20 psi on stock gap. 🤣
@XCVi_MAC
@XCVi_MAC Жыл бұрын
I just came across this page and absolutely amazed by the knowledge.
@johnudonn4309
@johnudonn4309 Жыл бұрын
Great info on the coyote!thanks for sharing this
@whitr2367
@whitr2367 Жыл бұрын
Such an amazing platform..I have an 18 tune, e85, gt350 half shafts, longtubes, and 10r80..ran a 10.78..
@saveongaming4418
@saveongaming4418 Жыл бұрын
N/A crazy..!
@aurorajones8481
@aurorajones8481 Жыл бұрын
PLEASE PLEASE do the 2UR-GSE. Its also a 5.0 dual overhead cam. Id love to hear your take on that mill.
@wakamotorsports
@wakamotorsports Жыл бұрын
Just Sub'd to this channel. Absolutely awesome presentation and how you speak during the explanation. Well done! Keep up the good work.
@stevenjackson9081
@stevenjackson9081 Жыл бұрын
Love the content keep it coming bro
@jacobwalters418
@jacobwalters418 Жыл бұрын
Very informative, love my 10r80 gen 3 coyote and have had a fbo Gen 1 V love both motors just astounding how capable the coyote is out of the box like you said boost fuel system and OPGS 🤣
@169abr
@169abr Жыл бұрын
Don’t even need OPG’s honestly unless you’re banging off the limiter constantly.
@jacobwalters418
@jacobwalters418 Жыл бұрын
@@169abr yes it’s a good safety precaution tho, manual cars need it more lund even states it can be optional for auto cars due to how they shift. If you have 2 step you want it tho.
@169abr
@169abr Жыл бұрын
@@jacobwalters418 yea if you’re banging off a 2step it’s a good idea. I just hate that people swear you need 2steps NA lol
@joegage6171
@joegage6171 Жыл бұрын
Gotta love the 1st gen V’s!
@6.2Slomaro
@6.2Slomaro Жыл бұрын
I have a 2011 F150 5.0 best truck I owned. Has 224k miles and used it for many road trips. The most I ever had the truck do, was towing my other car from STL to LV. Very reliable and smooth power delivery. I know the truck 5.0 is different than the mustang 5.0. But regardless the 5.0 is a very good motor. One day I’ll get a gen 3 10speed 😉
@jd4346
@jd4346 Жыл бұрын
Present day I have a ‘12 F150 Coyote with 65,000 miles. I have an aftermarket exhaust system and it sounds just like its coupe comparison sister. Gosh I love the truck, lowering it soon and putting some love into the engine. But Im sure it’ll be very appreciative of the power I put behind that crank. One other thing I noticed is while Coyotes also love hogging air into the intake, when you downshift in those trucks/stangs, the backfire is one of the scariest noises Ive ever heard. Its sure enough to make a whole daycare wet themselves lmao
@enigma9789
@enigma9789 Жыл бұрын
I have a 2011 f150 5.0 and a 2019 3.5 ecoboost. Smooth power delivery? the 5.0 doesnt make power until 4500rpm. Drive an ecoboost.
@6.2Slomaro
@6.2Slomaro Жыл бұрын
@@enigma9789 the EB has too many horror stories than the 5.0. They make power but at the end of the day the 5.0 is the better motor.
@enigma9789
@enigma9789 Жыл бұрын
@@6.2Slomaro But how do you know without owning both?
@6.2Slomaro
@6.2Slomaro Жыл бұрын
@@enigma9789 why would I own one after knowing from everyone’s experience with the EB? I did my research while I was looking for an Ford F-150 and I’ll gladly stick to the 5.0 motor.
@natedogg9999
@natedogg9999 Жыл бұрын
Greatly explained and I’m subscribing!
@leonardrice2830
@leonardrice2830 Жыл бұрын
I've recently subscribed. TRX and RAM 3500 Cummins owner. Huge car/truck fan. Your videos are top notch! Thanks so much!😃
@WJHandyDad
@WJHandyDad Жыл бұрын
that was great. I always thought the only way to go would be an LS swap. I'd love to do a Coyote swap on one of my Crown Vics whenever (or if it ever) wears out. But they seem so well made that they will probably outlive me.
@user-pu1cr6gl7c
@user-pu1cr6gl7c Жыл бұрын
I had a 2003 Crown Vic with 300k on it. It was my first car. Just sold it. I just had to add some oil every couple thousand miles. Changed the coil packs and spark plugs but besides only a few other minor mechanical things it runs great. The 4.6 is one of the most reliable engines ever made in America.
@ztwntyn8
@ztwntyn8 7 ай бұрын
Get your wallet out bro
@joshperry2430
@joshperry2430 6 ай бұрын
Your old vic motor will never die. You're just going to have to do it.
@projectf025
@projectf025 6 ай бұрын
Ur gonna spend less than half on an ls than a coyote 5.slow. hell even the lincoln continental guys build turbo ls engines for roughly 6k rather than a bone stock coyote for12-15k
@MURD3R3D
@MURD3R3D Жыл бұрын
these videos are amazing. looking forward to a video about the record breaking z06 NA engine coming in 2023!
@mikegimple4725
@mikegimple4725 Жыл бұрын
Takes a coyote all day to catch a stock c8 they won't even run even close to Z06 can't imagine what's going to happen when they introduce the z51 the 5.5 is an overhead valve motor just like the coyote and it'll destroy it the ls is not a fair comparison it's a single overhead cam which will still outrun the coyote if you guys go back and look at the test that they did that coyote on boost but it busted the timing chain the Chevrolet LS series made 1700 horsepower the coyote can't hang with the ls with boost. Besides it ain't $30,000 to fix a junkyard 5.3 that will still outrun a coyote peace out
@cuhyotepowered1201
@cuhyotepowered1201 Жыл бұрын
@@mikegimple4725 i love how much in denial you GM fanboys are. The Camaro Can’t compete with the mustang so you got to compare apples to oranges over a different class of car 😂 imagine you think you’re smart comparing a mustang to a mid engine car that’s costs a lot more. There’s plenty of mustangs that are faster than C8s anyways if you give them room to stretch their legs and don’t sissy out on a 1/8 track because you know you’re gonna lose.
@davidgraham7325
@davidgraham7325 11 ай бұрын
Gm boys are going to have to learn to speak Chinese now since the China boys own gm 😊
@omarboone1220
@omarboone1220 6 ай бұрын
The first time I heard a Coyote Mustang at the track, I was hooked! Very unique & cool sound.
@gwitaz5407
@gwitaz5407 Жыл бұрын
Awesome video man
@articfever3616
@articfever3616 Жыл бұрын
Can’t wait for HEMI breakdown!
@brockweaver8476
@brockweaver8476 Жыл бұрын
The voodoo has to be my favorite engine for its sound. My only hope is I can mess with it the same way you can a coyote
@PeeterPuncher
@PeeterPuncher Жыл бұрын
have fun with that....due to the lack of a balanceshaft to counter-act the flat-plane crank design, the 170g's of lateral movement vibration from 7250-8000 it just keeps breaking starters, bellhousings, and even in some cases breaking the track-pack oil cooler right off the side of the block...JUNK!
@11Bravo2Papa
@11Bravo2Papa 3 ай бұрын
Your videos have taught me so much they're very informative and interesting keep up the good work.
@jblovell9065
@jblovell9065 Жыл бұрын
Bro you are right on point being a LS6 Z06 owner and a GT Mustang owner 👌🏿
@mr220v
@mr220v Жыл бұрын
That's the tradeoff here. You get to choose the better head, or the larger block. I think I like the ohv better though. It's easier to get the GM engines to rev than it is to increase the displacement of the coyote. I also like the fact that ohv engines fit in smaller engine bays.
@MichaelWittner
@MichaelWittner Жыл бұрын
Isnt all of the engines over head valve.. did you mean cam?
@azolis1597
@azolis1597 Жыл бұрын
@@MichaelWittner pushrod engines have yhe classification of OHV. Yes all engines are OHV but they do not have cams above them. Imo easier way to say ut is CIB or cam in block
@MichaelWittner
@MichaelWittner Жыл бұрын
@@azolis1597 ok gotcha. Just using different terms than what im used to. We usually say DOHC or SOHC and call the others push rod motor
@rogermahaffey26
@rogermahaffey26 9 ай бұрын
ohc engines are not true american v8 muscle
@Metal_Stacking
@Metal_Stacking Жыл бұрын
Loved my 15 gt tune exhaust making 440rwhp far from my fastest vehicle but was a fun car to drive. Bought it to supercharge it and decided it was fast enough without it. Loved how it built power all the way to 7500 like a big turbo 4 cyl.
@nitomeanboyGBODY
@nitomeanboyGBODY Жыл бұрын
I learned a lil more about the coyotes today.. great info on it 💪🏼💪🏼
@MultiLegostuff
@MultiLegostuff Жыл бұрын
This was a very well done video 👍
@bardstables8909
@bardstables8909 Жыл бұрын
I love my gen 3 coyote. Put it on the dyno and straight from the factory it made 412 wheel horsepower. Now I've added a Roush X pipe, steeda CAI and an E85 tune. I'll find out my new numbers next month which I'll post on my channel.
@4touchdowns1game29
@4touchdowns1game29 Жыл бұрын
Yea I just sold my mustang still sad. Was a 2017 ecoboost. With just an intercooler, downpipe and a tune thing made 403 wheel with 460 tq but made over 400 tq at about 2000 rpms. Funny how the small ecoboost engines are torque monsters while big displacement boosted coyotes are hp monsters. Wonder why coyotes for making so much hp make so little tq till it's way up high.
@bryanribey
@bryanribey Жыл бұрын
@@4touchdowns1game29 because that's what boost can do to an engine
@TheBigEasyVette
@TheBigEasyVette Жыл бұрын
@@4touchdowns1game29 small turbo = fast spool, which means more torque down low.
@robquin2460
@robquin2460 Жыл бұрын
@@4touchdowns1game29 engine design
@jasonnnnnnn
@jasonnnnnnn Жыл бұрын
@@4touchdowns1game29 that small turbo on the eco spools up early that’s why
@machdaddy6451
@machdaddy6451 Жыл бұрын
Great video! I think that the coyote engine is doing for Ford what the small block engine did Chevy back in the day.
@rickmerritt8273
@rickmerritt8273 Жыл бұрын
Love these videos. Modern engines are quite marvelous.
@Fullsend.Automotive
@Fullsend.Automotive Жыл бұрын
simple NA stuff is great for coyotes too, my ‘15 Mustang with ~$5-600 in bolt ons makes 480 to the wheel and revs to 8k. couldn’t ask for more out of a little NA V8, it’s so much fun
@Sergio-ih6lk
@Sergio-ih6lk Жыл бұрын
I'm familiar with 4-valve motorcycle engines and two valve motorcycle engines there is a pretty big difference in horsepower on the dyno and especially the cylinder heads at low lift on a flow bench the four valve flows a lot more air at low lift just my experience but this is not set in stone there's an advantage to having four small valves versus too big valves the two big valves are heavier and they will float before the four small valves float just saying
@bence.gabor.slezak
@bence.gabor.slezak Жыл бұрын
That depends. BMW m43 8 valve vs m44 16 valve, intake 71g vs 2x47g, exhaust 64g vs 2x47g.
@byloyuripka9624
@byloyuripka9624 Жыл бұрын
more small circles can consume more area of a larger circle they are fit in.. more valves should allow more air in and out as you open more of the cylinder with eqch breath. yamahamma made a 5 valve for q second!
@nikolasvenetidis9608
@nikolasvenetidis9608 Жыл бұрын
Amazing video! Grew up loving Chevy's, started with an old C10 with a built block, now I bought a 2021 GT with the 10 speed and man does these 5.0s put in work!
@Paper.Power.Politics
@Paper.Power.Politics Жыл бұрын
My mustang ecoboost beats 5.0s all day
@xxxroberttheking
@xxxroberttheking Жыл бұрын
There’s always a eco booster out there waiting in the shadows to justify their purchase vs a 5.0. Don’t get me wrong, I love the eco boost platforms and respect the power they can make but stock vs stock the 4cyl mustang doesn’t stand a chance vs a 5.0. Now with a tune and a boost controller they are absolutely faster than a stock 5.0 but both at max bolt on or max boosted the 5.0 will win every time even built N/A 5.0 vs bolt on eco boost leans towards the 5.0🤷🏾‍♂️
@Paper.Power.Politics
@Paper.Power.Politics Жыл бұрын
@@xxxroberttheking yeah ur right! But I’m the one lurking in the shadows! Hahah my stock engine with Upgraded turbo and intercooler is maxed out at 420whp. And yeah stock vs stock a 5.0 wins hands down but the ecoboost mustang actually keeps up pretty well and almost ties in a 1/8th mile race. So the ecoboost are impressive for being a 4 cylinder! Right now I’m building a 1000whp ecoboost mustang! Gonna be sick!! But seriously people under estimate the ecoboost mustang! And I’ve raced scat packs and 5.0s and I’ve won! My new build is gonna be a one a kind!! I’ve always been a 4 cylinder turbo guy so when mustang ecoboost came out I had to have it and with the 10 speed transmission it’s pretty impressive even at stock! But just with upgraded turbo and intercooler you can reach 420whp on the stock engine. And for way less money then a 5.0 or scat pack cost. I seriously love my car so much even at the 420whp limit. It rips!
@cesarpalmos8235
@cesarpalmos8235 Жыл бұрын
@@Paper.Power.Politics I understand your enthusiasm, but with the right amount of money, anything can make good power. However, spend the same money on the coyote and I can almost guarantee the 5.0 will make 1500+ hp. Funnily enough, the 2.3-2.5 Duratec engines are thought to be a 5.0 cut in half. They also have a high volumetric efficiency. My n/a 2.5 has a volumetric efficiency of around 105-110, just like the Coyote. I will be boosting it soon and see what it does.
@Paper.Power.Politics
@Paper.Power.Politics Жыл бұрын
@@cesarpalmos8235 yeah I agree , yiur 100% right. A mustang ecoboost is just what I wanted tho. To each there own. But My build is not the normal ecoboost build. I’m using a sleeved 2.0 focus ST block with the 2.3 internals. The focus ST 2.0 block is way stronger then the 2.3. I’m also using a 4 port head vs the stock single exhaust port head. Everything is custom spec forged. Goin along with a xona xr 105 69s turbo and turbo kit made by ets. Also gonna be dual injection port and direct. It’s a extensive build and built to handle way more then the stock 2.3 is built for. Also getting the 10 speed transmission built , also gonna be dual clutch like the 10 speed on the 5.0 is. Using the best metals and parts you can get for the build. Like custom spec Darton sleeves, custom spec traum pistons, custom cvt piper cams, 4330 Callie’s enforcer rods , coated bushing with upgraded 3.5 rod bolts and a upgraded h13 tool steel wrist pins. It’s gonna be sick!!!!!
@MySideWinch
@MySideWinch Жыл бұрын
Great video 💯
@user-zy4uc3fq8s
@user-zy4uc3fq8s Жыл бұрын
You explained it all very clear thanks man
@Wicked_RotF30
@Wicked_RotF30 Жыл бұрын
How about an in depth video on the different versions of 4.6L and 5.4L modular Fords?
@Silverblade75
@Silverblade75 Жыл бұрын
Can you compare a 5.0 coyote to a 5.4 dohc (ideally from gt500) and maybe throw in 4.6 dohc if they are close enough. Debating on what to swap into my new edge. Thanks!
@monstersdad67
@monstersdad67 Жыл бұрын
Recently found your channel, Great one you’ve got here.
@brolly2479
@brolly2479 Жыл бұрын
Great video very informative
@marcink1755
@marcink1755 Жыл бұрын
Love that your videos on cars are objective. Keep up the good work. Informative and factually grounded. Both Coyote and LS1 are FUN and fast. I tracked a 2014 Mustang GT for some years, as well as a 2018 Camaro SS 1LE. And that experience makes me want a SS 1LE chassis with a Gen3 Coyote power plant. Love the how planted and competent Camaro chassis is, but I miss how well the Coyote revved out.
@shaunjay6040
@shaunjay6040 Жыл бұрын
No lie, I’d love to see a comparison like this with the hemi, coyote, and LS/LT
@scottearl7687
@scottearl7687 Жыл бұрын
No point ls/lt does everything the hemi does but cheaper and better
@shaunjay6040
@shaunjay6040 Жыл бұрын
@@scottearl7687 Better? Well that’s debatable. I’ve seen 5.7 ram trucks give a some LS guys big problems at the track. I agree with you on the LS platform is definitely cheaper though. The after market support for the hemi isn’t as large as it is with Ford and GM, so the expense makes sense. However Eric Holdner proved the older 5.7 hemi’s are more than capable of 600+ stock bottom end with the right piston ring gap. Who knows what the 5.7 Eagle would do. So there’s definitely a conversation to be had about the 5.7 itself. Let’s not take for granted that the drag pack starts life as a 5.7 block... and 7.5 second quarter is nothing to sleep on.
@ricardososa403
@ricardososa403 Жыл бұрын
Look up LS vs coyote shootout an you will see why LS is on top
@soadous
@soadous Жыл бұрын
Amazing video. Subbed
@rocketmissionfilms1419
@rocketmissionfilms1419 Жыл бұрын
Awesome channel dude i just learned a lot about coyote 5.0 engines
@mrcrunchandtheserialkillers
@mrcrunchandtheserialkillers Жыл бұрын
Real niggas would know that the graphics resembles Midnight Club 2….WHAT A LEGEND💪🏾🙌🏾
@whatiwant8898
@whatiwant8898 Жыл бұрын
I like both the Coyote and the LS for different reasons, having owned both, and I think they're equally good. The 6.4 Hemi is probably my favorite though because it feels like it has the most soul put of the 3... for the most part.
@dougsmith3821
@dougsmith3821 Жыл бұрын
6.4 or 6.2?
@whatiwant8898
@whatiwant8898 Жыл бұрын
@@dougsmith3821 6.4. I prefer the Apache over the Hellcat.
@PeeterPuncher
@PeeterPuncher Жыл бұрын
chrysler junk
@whatiwant8898
@whatiwant8898 Жыл бұрын
@@PeeterPuncher says the one who's name is "1993Cobra"
@texasstreetkings537
@texasstreetkings537 Жыл бұрын
@@whatiwant8898 right lol
@thollingsworth4910
@thollingsworth4910 Жыл бұрын
I love watching these videos and then reading the comments about both sides going at it
@nelsonbonet4187
@nelsonbonet4187 Жыл бұрын
👌 a perfect explanation my friend.
@speedlife301
@speedlife301 Жыл бұрын
5.0 is a great platform no doubt . But your wrong a c7 zo6 can make 1000whp bone stock with just fueling upgrade and a blower swap from the smaller stock 1.7 blower to a Ysi or f194a and make it all day reliably.
@Lowzaracing
@Lowzaracing Жыл бұрын
keep this series going bro please, i already love it
@seanwilson3067
@seanwilson3067 10 ай бұрын
even tho i don’t plan to live past 30 this guy is giving me a lot of knowledge and i appreciate you bro
@celtiberian
@celtiberian Жыл бұрын
Very nivce video, thanks for uploading. You just got a new subscriber. And now I have a craving for a 5.0 LOL
@josava
@josava Жыл бұрын
Great video as usual. Still want an LS more but Coyotes are incredible engines, well done Ford!
@mariek6993
@mariek6993 Жыл бұрын
coyotes are great but it's a pain dropping them into anything because of their size. ford won the battle, but lost the war.
@Steve-yr5vi
@Steve-yr5vi Жыл бұрын
Today if I wanted a cam-in-block engine there is only once choice IMO; the 7.3 Godziira.
@Abreezeducttesting
@Abreezeducttesting Жыл бұрын
Ls swap the world!
@snooka2484
@snooka2484 Жыл бұрын
This is a great informative video.
@johnqueen2754
@johnqueen2754 Жыл бұрын
You just got me as a subscriber. I do have an 88 model Windsor. So maybe one day I can build it!
@ronaldjoseph9607
@ronaldjoseph9607 Жыл бұрын
LS is cheaper to modify and more simplistic. Bigger bang for your buck and an LS can be found anywhere for cheap.
@b.s.adventures9421
@b.s.adventures9421 Жыл бұрын
Yep, all true, but, price, availability, aftermarket support, and simplicity is why the LS is more prevalent. Good video regardless. Thanks for content.
@albertocabrera1125
@albertocabrera1125 Жыл бұрын
Someone gets it!
@MikeGubisch
@MikeGubisch Жыл бұрын
this video is phenomenally made
@PeterReingold
@PeterReingold Жыл бұрын
Thanks, great info. FYI the gen I Coyote has forged rods, too (4:30), from the beginning, 2011.
@elibain6152
@elibain6152 Жыл бұрын
No sir. The change was made in the gen 2 coyote which is what led to such an increase in power potential on the stock bottom end.
@matthewdye6502
@matthewdye6502 Жыл бұрын
You don't need to rev a LS that high because of the displacement. I believe the high revs to make the power is what puts a mustang in to the curb after the 1-2 shift. The LS is still the most common engine swap even after 2011. I hate Fords but still love your videos. Keep up the great work bro.
@Johanason
@Johanason Жыл бұрын
3:49 that’s not it, what your noticing is the difference between supercharging and turbocharging, not head flow differences because hellcat heads flow around 340cfm. It could be because the valve train on the coyote works better all around the rev range/ makes power higher but idk. For comparisons sake I believe the 6.4s flow around 360-380 and with a hellion twin turbo kit at 8lbs they can make 700whp
@mikelliteras397
@mikelliteras397 Жыл бұрын
There’s more to it than cfm. The way the air flows in 2 valves has less static pressure and can flow more with less boost. It’s why Jon Kasse doesn’t like giving cfm flow numbers. He says to look at the horsepower numbers because the flow number doesn’t tell everything. If you don’t know who Jon Kasse is he’s probably the guy who’s won the Engine Masters challenge more than anyone.
@MT-kh4uj
@MT-kh4uj Жыл бұрын
Awesome video!
@snakes5506
@snakes5506 Жыл бұрын
Excellent video brother! thanks!
@e36blur
@e36blur Жыл бұрын
I learned a lot from this video and the comments lol. Never knew Ford heads had 290 CFM( and Hemi's 340 cfm?). The best thing about an LS is the fact that it makes great power with a small package; you can fit it into damn near anything. Also, stock motor can take a beating, a cam cost $200 (compared to $1000+ for coyote), valvetrain is cheap, engines are cheap (got my aluminum 5.3 truck motor for $500). Regardless Fords sound great at 8000 rpm, great motor for NA. That's why I'm excited for the c8 z06, 5.5l 670hp 8600 RPM
@yamahaguy1732
@yamahaguy1732 Жыл бұрын
Chevy won in the single cam pushrod engine competition and I have a feeling this new Z06 vette engine will trump the coyote as well. Time will tell. Either way these days you gotta just appreciate any v8s on the market with this EV crap.
@Johnnycdrums
@Johnnycdrums Жыл бұрын
That won't be cheap though.
@123paisa
@123paisa Жыл бұрын
Imagine a 6.2L Coyote 😮‍💨
@henrymcmiller2527
@henrymcmiller2527 Жыл бұрын
Yeah that would be nice, but I would settle for a 5.2 Coyote; standard for the Mustang!
@CJColvin
@CJColvin Жыл бұрын
Now that would be awesome or better yet a 7.0L (427) Coyote V8 for the Modern day Boss 429 and it would make well over 750 HP NA and it would be considered the Modern day 427 SOHC Cammer V8. Also There's the 6.2L SOHC 2V BOSS V8 as well could be considered the Modern day Cammer if done right and bump the displacement to 7.0 liters.
@ShaneWelcher
@ShaneWelcher Жыл бұрын
Great knowledge share, thank you for your efforts
@YamahaR12015
@YamahaR12015 Жыл бұрын
Great video explaining it all. People love bashing the 5.0 without any knowledge about how engines even work.
Why LS Engines Destroy LT Engines Still😭 | Explained Ep.1
9:04
HEMI vs Coyote (Can a 5.0 beat a 6.4?)
15:17
Auto Guild
Рет қаралды 16 М.
Black Magic 🪄 by Petkit Pura Max #cat #cats
00:38
Sonyakisa8 TT
Рет қаралды 37 МЛН
100❤️
00:20
Nonomen ノノメン
Рет қаралды 60 МЛН
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 2,3 МЛН
Каха инструкция по шашлыку
01:00
К-Media
Рет қаралды 3,7 МЛН
The Car That Is Uncatchable👮🏻‍♂️ | Explained Ep.32
18:27
Why Old Engines DESTROY Newer Ones💀| Explained Ep. 25
14:05
337 SPEED
Рет қаралды 638 М.
Who Makes the Best V8 Engine and Why
8:12
Scotty Kilmer
Рет қаралды 2,3 МЛН
Why Supercharged Mustangs Are Too Powerful!😳| Explained Ep.15
10:07
The Power of 2.5- vs. 3-Inch Exhaust - Engine Masters Ep. 9
14:34
MotorTrend Channel
Рет қаралды 6 МЛН
GM Gen 5 LT vs Ford Coyote.  Which one is better and why.
16:27
Auto Guild
Рет қаралды 1,2 МЛН
Transforming this slow 4.6 into a screaming coyote killer
18:08
Four Eyes
Рет қаралды 4,9 МЛН
Пацан купил Мерс SL за 350тр. Но, есть нюанс…
1:23:45
Парень Научил Собак Водить Машину 😁🥰
0:27
ДоброShorts
Рет қаралды 2,2 МЛН