How I Built My Reef Aquarium Stand Part1!

Рет қаралды 56,651

3 жыл бұрын

In this video series I build a DIY Reef aquarium stand for my New 125 gallon reef aquarium. This series is apart of The #ReefTankRebirth here on #TheCoralReefTalk
I am finally getting a new reef aquarium from SCA and it has just recently arrived, but in order to fill the tank I need to build a stand. So if you like DIY or Do It Yourself Projects, than this Reef aquarium stand build is for you. I hope you learn something in this video and it helps you build your own reef aquarium stand for your new aquarium project. I am not a professional carpenter but I think I have built a pretty simple and easy DIY Reef Aquarium Stand.
Follow the series here on KZfaq by clicking subscribe and checking the bell icon to be notified when I post the next video in the series.
Affiliate links below
TOOLS USED IN VIDEO
Jigsaw
amzn.to/37F9I7w
Drill
amzn.to/3uD9KpE
Similar Miter Saw
amzn.to/3rmwU1k
Music by GurtyBeats
Bubbly Boi Instrumental

Пікірлер: 59

@shannonthejeepgirl 2 жыл бұрын

This video saved me. Thank you for the step by step. All the other videos I watched skipped the parts I needed the most.

@TheCoralReefTalk 2 жыл бұрын

You're very welcome. So awesome to see you got value from this video. Thank you for watching.

@Its_about_that_time 2 жыл бұрын

Thanks for this video. Probably the easiest and straight forward one I've seen

@TheCoralReefTalk 2 жыл бұрын

You're welcome. I'm glad this video was helpful.

@catherinebeatific535 Жыл бұрын

Thanks for the video. Good build and you made it aesthetically pleasing. Easy to follow instructions. I'm building myself one.

@TheCoralReefTalk Жыл бұрын

You're very welcome thanks so much for checking it out I'm glad it was helpful. That's awesome Let me know how your build goes.

@mrsjones00123 3 жыл бұрын

Wow awesome bro

@Mrmike710 6 сағат бұрын

Hey I'm just curious what size plywood did you use for the bottom?

@JNC1973 4 ай бұрын

See I had that same problem at first while trying to screw the frame boards together with them splitting so I said screw this and I am now going to buy structural screws that say no predrilling required because they are designed to not split the wood. Plus they are stronger anyway so i'd feel safer knowing that the 75 gallon aquarium isn't gonna come crashing to the ground at 5 o' clock in the morning while I'm sound asleep because the stand collapsed. Then I'd wake up and be panicking jumping outta bed stepping into ankle deep water slipping and sliding on the fish flopping around the room trying to get to the light switch on the other side of the room lol.

@stevemiller8239 2 жыл бұрын

Nice. Good job. I am ready to start my own build now. I only have a 75 gallon, but believe that bigger is always better.

@TheCoralReefTalk 2 жыл бұрын

Thank you so much. Hope you found some value in the video. I remember having a 75 gallon. That's a great size. Bigger can be better and I'm loving the 125g tank I have now.

@brianmizway9324 5 ай бұрын

Looks great!

@TheCoralReefTalk 5 ай бұрын

Thank you so much! Thanks for checking out the video.

@wolfman44wdj 2 жыл бұрын

Awesome I'm going to be building one for my 55 gallon tank

@donaldlopez15 2 жыл бұрын

Sweet. Have built one already for my existing 55 gal.now. Getting a 125 gal next.

@tcarroll311 Жыл бұрын

Good job. I built a stand for a125 gallon aquarium years ago using 4/4s for the frame notched out like Lincoln logs with 1/4s on the sides and z bars to accent the doors with strap hinges. Then I stained in in black walnut.

@TheCoralReefTalk Жыл бұрын

Thank you. Oh wow, That sounds like a great stand as well , using 4/4s made it pretty sturdy I'm sure. Very cool, it's always great working on a Diy project and satisfying when it all comes together. Thanks for checking out the video.

@gordiefrench5342 3 жыл бұрын

I agree in over building but in mine I did not put a vertical brace in the center in the front for ease of sump space to work in it. This has been running my 125 for about 15 years without any trouble and my doors just but together

@TheCoralReefTalk 3 жыл бұрын

That's awesome 15 years. I went back and forth whether or not I needed it for the front and back. Actually had to remove the one in the back to get the sump under there. but I put it back in 😀

@Mrmike710 5 ай бұрын

What size screws did you use for the plywood on top?

@omnilife6660 Жыл бұрын

i challenge you to build some side doors to remove the filter from the side 😅

@redneckgearheadgarage495 2 жыл бұрын

Those legs are definitely overkill, but that is my favorite type of kill.....

@briankelly3884 2 жыл бұрын

Very sturdy on the vertical, but you could use some anti-racking. diagonals. You could cut some 2x4s from lower center in the back to upper on both left and right. Or completely sheet the back with a piece of one piece of solid ply. Otherwise you have a ton of weight sitting on 4 sticks, pine is soft and if it gets whacked enough those holes will loosen. A piece of strap metal would work as well.

@readysetawesome 2 жыл бұрын

For something this size you really don’t need the diagonals. Overkill

@krisboats Жыл бұрын

@@readysetawesome this whole thing is overkill. Manufacturers give you stands made of 18mm mdf and this guys out here using railway sleepers on a 75 gallon tank 😂😂

@philipdavis4927 8 ай бұрын

The strap metal will rust with salt water. This stand will be plenty strong for a 125.

@donaldlopez15 2 жыл бұрын

Sweet how to brother. Simple and easy to remember. Gonna use this method for my next build.

@3rdEyeGnostic Жыл бұрын

If you don't have a table saw, I suggest you go get one. They're really not that expensive.

@TheCoralReefTalk Жыл бұрын

Thank you yes that would be a great tool to have. Thanks for checking out the video.

@joseCalderon1976 10 ай бұрын

Thanks for the video. I'm going to build a stand for a 125g and sump, but my tank is for African chiclids. Hehe

@TheCoralReefTalk 10 ай бұрын

You're welcome. Glad it was helpful. Sounds like a cool tank!

@joseCalderon1976 10 ай бұрын

@@TheCoralReefTalk It's used. I'm trading two of my RC vehicles for the 125G tank and sump plus some other stuff like pumps and skimmer.

@russellkeith3193 2 жыл бұрын

use power pro premium interior wood screws self tapping 9×3 @ lowes no need to pre drill

@TheCoralReefTalk 2 жыл бұрын

Nice! Pre drilling took a little extra time.

@karstenbroda5752 Жыл бұрын

How thick are the woods and how high is the frame

@trenton7 Жыл бұрын

Wouldn’t it be a good idea to make the frame out of metal and add wood panels to the sides and the door?

@6jdhd 11 ай бұрын

For a 125g you should of used 2x6 for the framing. Will hold alot of weight. If this was just a fresh water tank that that is fine.

@softaco3088 11 ай бұрын

A single 2x4 around 3 feet can hold 800 pounds. just throwing that out there.

@6jdhd 11 ай бұрын

@@softaco3088 OK so with rocks and water it's way over that would you say. And that for a average 4 ft tank. Rule of thumb is 3x over the weight your going to put. Your looking at water and rocks about 2 to 3000 lbs there you want a stand to support way more that that. Cause if your going to have corals that adds weight when they get bigger.

@softaco3088 11 ай бұрын

He had built the tank to be able to distribute the weight evenly with (I think I counted 16, 2x4 legs - 3 per corner and 4 for the middle braces.) 800 pounds was for 1 leg... not the whole unit.

@MrKevinkj2002 Жыл бұрын

You did good, only thing is on your braces on corners, where you said you could have used 2x6, you should have just pushed 2x4 flush with the inside 2x4 and then the other brace moved over, then the brace are close to flush with inner guides and they over lap the 2×4 joints on top and bottom frame. I wish could send a photo of what I mean. But anyways good job and it will hold good

@TheCoralReefTalk Жыл бұрын

Thank you so much. Yeah I think I follow what your saying. If I had slid the 2x4s over that little gap in the plywood it would disappear and be in the corner that gets covered later, It would still have the same amount of support just hide that better, right? It was a fun build, I'm really happy with the final result.

@SuperRasean 10 ай бұрын

Sir do you know this aquarium stand can support the weight of Blackhawk.. in its weapons ready configuration 😂

@TheCoralReefTalk 10 ай бұрын

Lol 🙌 Thank you! It was all part of the plan! Nice, Strong and Sturdy. Thanks for checking out the video!

@madshepsreef282 3 жыл бұрын

Really funny I’m building a wooden tank stand aswel

@TheCoralReefTalk 3 жыл бұрын

That's awesome how is it going?

@madshepsreef282 3 жыл бұрын

@@TheCoralReefTalk the stand is going really good, I just ordered a new tank 72x26x30W should get the tank in about 1-2 months. Have a cheeky look at my KZfaq page it’s real basic but I’m trying.

@brentleylegend8964 2 жыл бұрын

instablaster

@taivo1172 2 жыл бұрын

how can you check if the stand is leveled if the floor isnt leveled?

@TheCoralReefTalk 2 жыл бұрын

I checked the level of the room and the stand multiple times. When moved into place it was checked again. I knew I had to get it right.

@BaadMotorFinger Жыл бұрын

You can put shims underneath a few corners if you need to level it

@TinoushGTR Жыл бұрын

Making this stand these days will send you back for at least €200. Wood is that much more expensive.

@joegellert6159 2 жыл бұрын

Can I order it from you if you can make new 1?

@TheCoralReefTalk 2 жыл бұрын

Hey thanks for the question. I appreciate it. I would recommend finding someone local that can help build it with you or for you and point them to this video and the others in this series. I tried to make them easy to follow and documented my entire process. Thank you again so much please let me know how your stand turns out.