How I Fixed This Roof Rail Dent - Paintless Dent Removal Training

Рет қаралды 36,967

Күн бұрын

'A Pillars' and 'Roof Rails' can be tough to work on so in todays video I am showing you How I Fixed This Roof Rail Dent with hot glue, some tapping down and a whole load of blending!
If you'd like to learn how to remove dent damage and how to set up your own Paintless Dent Removal Business you'll love my exclusive PDR Training where I share with you everything I have learned over the last 10 years, the good the bad and the ugly!
Join today by following this link - www.learnpdronline.com/lpo-me...
Imagine having a PDR tech on hand to answer your questions during training... Well, I am there in the members only forum to help you along every step of the way.
Learn how to fix dents clean and actually get paid for your Paintless Dent Removal skills
#learnpdronline
#pdrpath
LET ME ANSWER YOUR QUESTIONS?
If you have any questions or want to learn more, leave a comment below the video, and I will try and help as much as possible.
=-=-=-=
GET FULL ACCESS TO OUR ONLINE PDR TRAINING!
lpo.li/onlinepdrtraining-a
=-=-=-=-
Royalty Free Music: Bensound.com
License code: ULKCLOHK3YS3R7FR
=-=-=-=
SUBSCRIBE FOR MORE CONTENT
If you like my content, please consider Subscribing to this KZfaq channel and Liking my Facebook Page to be instantly notified when I release new content for you! ;)
KZfaq - Subscribe to my KZfaq channel here:
/ learnpdronl. .
FACEBOOK - Connect on my Facebook page here:
/ paintlessden. .
=-=-=-=
Want to learn more about Paintless Dent Removal and how to learn the actual skills you need to get started and be successful in PDR? Then make sure to visit the Learn PDR Online website below:
lpo.li/onlinepdrtraining-a
#tomlustedpdr
#dentremoval
#dentrepairtools
#dentrepairtraining
#howtofixdents
#learnpdronline
#pdrtraining
#dentrepairvideos
#paintlessdentremovaltraining
#pdrtrainingcourse
#pdrtraining
#dentrepaircourse
00:00 Intro
01:17 Set up
02.58 Soften the crown
04:04 Assessing the repair so far
06:35 Cross check your angles
09:51 Blending
10:18 Special ingredient to learning PDR

Пікірлер: 41

@1st_track_dents 7 ай бұрын

Another quality repair Tom! 👍

@LearnPDROnline 7 ай бұрын

Thanks Jake 🙏

@sureshlingabathina 7 ай бұрын

Good you see you back on road to work.

@LearnPDROnline 7 ай бұрын

Not yet but hopefully soon, this was actually one of the last repairs I did before my accident! Thank you for watching

@jhh243 7 ай бұрын

Brother, thank you so much for showing us how to do this! Liked and subscribed!

@LearnPDROnline 7 ай бұрын

No problem, thanks for watching John!

@billramsey800 7 ай бұрын

Nice repair Tom also made more difficult in the cold climate. Keep your recovery positive 👍

@LearnPDROnline 7 ай бұрын

Thank Bill, now both my wife and I suffer with our backs I am thinking we need a warmer climate generally :) Do you want two roomies? Hope you're well buddy!

@billramsey800 7 ай бұрын

@@LearnPDROnlineNo problem Tom will add you guys to my guest list along with a few other friends who are also hitting me up🤣👍

@carrozzeriatonon5169 19 күн бұрын

Perché non tradurre il dialogo in italiano

@jirizahradnik9408 4 ай бұрын

Super ..great job..

@LearnPDROnline 4 ай бұрын

Thank you🙏

@tommorgan7981 2 ай бұрын

nice work

@LearnPDROnline 2 ай бұрын

Thank you 👍

@yellowduck8061 Ай бұрын

Skilled technician here.👏👏👋🇺🇲

@LearnPDROnline Ай бұрын

Thank you!

@ericgraham7026 7 ай бұрын

Hi Tom, great videos - thank you. I’m wondering - what’s the difference between hot and cold glues?

@LearnPDROnline 7 ай бұрын

Thanks Eric, I use cold glue to reduce large damage quickly so if the panel is a large soft dent its usually quicker to start pulling it out back into shape with cold glue, it allows for a softer pull so you can work quickly without causing big high spots with each pull, for me hot glue is stronger and more precise so as the damage gets smaller I switch to hot glue to give me stronger pull to lift stubborn low spots.

@johncampos1780 6 ай бұрын

Hot glue comes in rods and is applied with a hot glue gun, usually used with pull tabs, cold glue will come in a package, where you'll have to warm it up by stretching it out or hit it with the heat gun, you'll be using this with a weighted slide puller.

@LearnPDROnline 6 ай бұрын

Thanks for your input@@johncampos1780

@dominikkrajzel7011 7 ай бұрын

Good job. I bought the car after the hail. I have many dents to fix similar to yours. Now i know that its hard work to do😅

@dentremover01 7 ай бұрын

Get Tom on it, he’ll sort it no probs

@LearnPDROnline 7 ай бұрын

Ha ha, yes it is hard work, but it is a process that can be taught! Do your research and learn as much as possible before you start on your own vehicle. If you're just starting out you will make dents worse before you learn how to make them better which is why we always start on spare panels or salvage cars! 👍🏻

@LearnPDROnline 7 ай бұрын

I've taken early retirement 🤣

@dentremover01 7 ай бұрын

@@LearnPDROnline oh bloodyhell!

@steveo3002 7 ай бұрын

what made you choose a square tab for the second pull vs a round or oval? thanks

@LearnPDROnline 7 ай бұрын

Good question, I chose the square tab for its size, the square shape allows more contact area between the tab and the panel vs the equivalent round tab in this particular 'smooth series tab' collection in otherwords i wanted to pull as much up at one time as I could, however I pulled a high spot into the low area, not ideal but it got the metal moving making the overall depth less. 👍

@gusmehmet5632 2 ай бұрын

Hi just come across your video. I have a similar dent on my car. Do you do any work in the croydon surrey area?

@LearnPDROnline 2 ай бұрын

I don't myself but you could try Richard - dentdoctorltd.co.uk/

@stucroft2340 2 ай бұрын

Hi Tom I have a repair to carry out with several 3 to 4mm dents very close to each other do you have any advice to carrying out the repair

@LearnPDROnline 2 ай бұрын

Hi Stu, it difficult to offer any advice as I am unsure of your current level, have you had any training yet or are you already out there fixing dents? Also depends on the car, the location of the damage and the tools available to you?

@stucroft2340 2 ай бұрын

Hi Tom thanks for the reply I have done easy dents on my other cars with good results however this car a Mini R60 is difficult as the door has a strength bar right where the dents are, I have a selection of tools from eBay nothing professional and wouldn't mind learning a little more to may be done this as a paying hobby as I'm retired in Turkey

@LearnPDROnline Ай бұрын

@@stucroft2340 No problem, yes a lot of Mini doors can be tricky with upper sections being double skinned in places and those side impact bars! Its a great hobby and if you get the feel for it and then the passion it can be a truly great career! If ever you'd like to chat more about our online training we offer you can reach me at tom@learnpdronline.com

@user-gz4lv7mm6y 6 ай бұрын

How it was cost approximately?

@LearnPDROnline 6 ай бұрын

This repair was around the £200 mark from memory, however I was carrying out more than one repair for this customer so had offered a combined discount for both of his vehicles.

@FPV-TV419 3 ай бұрын

Roof rails and a-c pillars are 🤢 to work on! So difficult to cross check. And glue only repairs i hate too 😂... what would take 10 mins to finish with a bar takes 5 times longer with glue lol

@LearnPDROnline 3 ай бұрын

Yep, rails are definitely tough if the damage is bad like this one and do usually take longer however, when you get a small shallow dent on a rail its often really quick to glue pull once you have some glue pulling skills, it took me a while to get into glue pulling at first but its a great skill to have and on certain damage types is the quickest way to the end result!