Top Fog light: 0:49 Bottom Fog light 3:45 Final result 6:45 At night 8:34

Thank you for this. Even I know my video from two years ago is shitty compared to what i know now. Just never had a chance to remake a better one. Until I do I will definitely refer people to this video. Good work man

Good job. Glad you were successful and as we know that light projected lower on the road when there is fog is best. Some people think High Beams will cut through the Fog but only make visibility worst. Low beams with Fog Lamps On. Too bad that the fog lamp wiring to the switch had to be a pain and messy to get to back of the firewall and through. Get a chance use electrical tape and some wire ties. Where did you pick up the switch?

I got the same ones and after installing the fog lights don’t work and the driver side accent light dims and flickers and the passenger works like it should. Unplugged the driver side and plugged it into the passenger it work like it should. Any idea what might be wrong?

Just bought the same ones you have, hopefully I can install them right

I spliced the red wire into the pink wire which is regular headlight I spliced the green wire into the blue wire which is my high beam. Into driver side headlight

Does anyone know where I can get these exact lights (DRL + fog) for cheaper

Nice install. I hate to be that guy but I think the fog light switch you put it upside down. The light bar should be at the top. For OEM functionality. connecting to the tail lights fuse is better than cigar fuse. However this is 10A not 15A. So you can leave the lights in auto and the fog lights will turn on and off automatically. The downside is that the tail lights should be on for the switch to work and won't work if your lights are off. I have it like this so I don't have to worry about my fog lights being left on or having to remind myself to turn them on every time.

where did you get the fog lights

this was helpful and I bought the same ones you have, question what if I don’t want the blue or turning signal so I still follow as you showed?

Just Curious you wouldn't know if the wiring harness color code is the same for the xse as for the trd shown in the vid for the headlights?

And this was done on your trd correct?? Cause I have a trd as well and I’m wanting to install fog lights like these as well The information was really helpful and it looks dope as well

I installed mine . I keep smelling burnt smell from drl module driver that powers drl lights. Is that normal lights are working fine.

Hi, I'm trying to install the same foglights on a 2019 Camry. I want to cut off the foglights power when the high beam is on. Do you know how I locate the high beam power source? My Camry came with a Bi-led headlights.

Will this work the same way for 2020 Toyota Camry SE?

I couldn’t find the headlight harness to connect the low and high beams. Could you help

Instead of splicing, you can simply just pull the pin out of the connector housing ,wrap the wire around it, and push it back in the connector housing.

Where did you connect the negative wire through the fire wall?🤔

There was no mention on their site if they would be compatible with 2021/2022 Camry TRDs. Sadly.

What brand are those lights ??

Hi that's any one had problems after installing this lights my car won't start so I don't know what's wrong any idea any thoughts?

Mine dont have any extra blue or green wires to connect👀

I got the same ones and after installing the fog lights don’t work and the driver side accent light dims and flickers and the passenger works like it should. Unplugged the driver side and plugged it into the passenger it work like it should. Any idea what might be wrong?