How to Install Clear Lens Fog Light Kit 07-09 Toyota Camry

Рет қаралды 145,101

1A Auto: Repair Tips & Secrets Only Mechanics Know

6 жыл бұрын

Buy Now!
New Fog Light Kit from 1AAuto.com 1aau.to/ia/1ALFZ00098
1A Auto Shows you how to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light. This video is applicable to the 07, 08, 09 Toyota Camry.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/tjT/1AXAA00013
• Phillips Head Screwdriver 1aau.to/tjT/1AXAA00013
• 10mm Socket 1aau.to/tuJ/1AXAA00017
• Solder Kit
• Trim Tool Set 1aau.to/tcT/1AXXX00004
• Side Cutters
• Ratchet 1aau.to/txV/1AXAA00016
• Socket Extensions 1aau.to/tCJ/1AXAA00015
• Wire Ties
• Floor Jack 1aau.to/tft/1AXAA00068
• Jack Stands 1aau.to/tfu/1AXAA00065
• Pick 1aau.to/tbB/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/tU/1AXAA00280
For More Info visit us at 1aau.to/h/8h/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 89

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@Sammin86 6 жыл бұрын

I installed my fog light kit but could not figure how to tap switch power. After watching this, boom, job done. Thanks for the post!

@mikelink5948 4 жыл бұрын

Excellent How To Video. Thanks,1A

@1AAuto 4 жыл бұрын

+Mike Link Thanks for checking us out. 1aauto.com

@heniutek77 3 жыл бұрын

super job, how to make the rear lights in the spotlight with two colored lamps?

@jus1taj 6 ай бұрын

This is so dope. Do I need fog light for my Camry? Well, maybe. Do I want them? YES! Thanks a lot 1A. 😁

@pedroguadamuz4938 2 жыл бұрын

Súper good video. Thank you very professional. Helps me a lot.

@oscardelafuente4798 3 жыл бұрын

Question:did you sale the additional fuse with the cable

@edgarhernandez7010 6 жыл бұрын

what fuses did you put on the add-a-fuse?

@antoniomadlangbayan7620 3 жыл бұрын

Great how-to video! I bought a fog light kit from you guys for my 2004 Nissan Frontier. This video certainly gives me confidence to do the install correctly. I have one lingering question that is preventing me from beginning though. Besides the 15A fuse for the fuse tap, WHAT WAS THE OTHER FUSE USED ON THE TAP? Someone commented a 5A. It looks like a 5A, but I'm not certain it was. Thank you in advance for the helpful feedback.

@samuelclay6348 Жыл бұрын

Does this kit come with all the included materials? Screws and bolts and wires and switch? Debating buying this and doing it myself.

@minkie1710 3 жыл бұрын

Hello, my car is the 2008 Camry LE. I see that my car came with a 15amp fog light fuse inside the car, could I use that fuse to power the fog light or I have to buy an add-a-fuse to powered it in the tail light fuse like shown in the video? Thank you!

@swatsullivan 3 жыл бұрын

There is a connector hanging down on both sides near the fog lamps. Is this pre-installed OEM wiring for the fog lights?

@christopherjacinto-caballe4330 2 жыл бұрын

They don’t work

@fuckinhd22 2 жыл бұрын

I have the same question I seen the connectors on mine as well

@AeolusCE07 2 жыл бұрын

After months of research those connectors are available but you will need the OEM blinker stalk, and the OEM relay to use it that way. The reason no one goes for that is you have to remove the steering wheel and air bag assembly to replace the stalk

@serge4856 Жыл бұрын

My 2007 Camry was prewired for fog lights but was missing a few wires and relay. The wires that were missing power the relay and ground the relay. I needed oem relay, and needed to add 3 wires with female pins to oem wire harness connectors inside the car next to fuse box. Not easy to do, but doable. Connector IL pin 3 needs to go to connector IL pin 4. Connector II pin 8 needs to go to ground (I connected my button to this wire so the button grounds the fog light relay and turns fog lights on.

@serge4856 Жыл бұрын

@@AeolusCE07 oem stalk not needed, but an oem relay, 3 wires with female pins. add to oem harness connector II pin 3 to 4 and connector IL pin 8 to ground (that is the hard part). Have to go to junk yard and get relay and wire connectors to scavenge female pins for connector II and IL. Depending on the year of your car connecter II =AI=1I, IL=AL=1L

@tanglotlim2299 4 жыл бұрын

can i connect the fog light wire to the beam light wire ?. is this reduce the light power or less light?

@bobbyclemente21 6 жыл бұрын

Very useful, thanks. If you work on your own car with that much patience and even temperament that's amazing, hah hah. I need that coolness but was always ticked off cause of the way these mfgs make things difficult!

@rickyrobertson2736 4 жыл бұрын

Will this work for 2018 Camry

@jaironbarrios3561 5 ай бұрын

The fuse inside the cabin is 15A and what number is the other, excellent video, blessings

@liberty4175 4 жыл бұрын

Great video

@mohammadyasinfaqeerzai6628 Жыл бұрын

Nice job but i wanna know that do the fog lights turns off while high beam lights , Because the ones with company fog lights does.

@mariorodriguez7693 5 жыл бұрын

what number of fuse to put on the arne

@fitzroymystro4322 4 жыл бұрын

Do u guy sell d harness only??

@matteoparisi2 3 жыл бұрын

What are the bulbs what type are they h11? 9005?

@evegtrrz28 2 жыл бұрын

Will this work on a 07 avalon ?

@michaelatkins9535 2 жыл бұрын

What fuse was use to add fuse adapter

@eduarmilla3996 Жыл бұрын

I installed fog lights on my Toyota corolla 2013 and everything works well but the only thing that’s concerning me right now is that the switch (button) stays on even when the car is completely off and the key is not in the ignition. Do you know what could be wrong? Thank you!

@acgsmith6853 2 жыл бұрын

Will this work on a 2010 Camry?

@Mohammed-vs4fm Жыл бұрын

Hey how do I do this on a Toyota Camry 2008 hybrid? Because the battery is at the back. And u couldn't find any battery terminal in the front. Not sure if they are hiding in relay box?

@revelionxation1286 5 ай бұрын

Others might have asked this before. How do you close the lid of the dash fuse box underneath the dashboard?

@abm_vano1069 6 жыл бұрын

Can a 2008/9 Camry le front bumper fit the 2008 Camry hybrid?

@1AAuto 6 жыл бұрын

+Tavano Sweeting It may have different mounting points.

@chrisdr03 6 жыл бұрын

I need the large cover versión for the camry SE 08. Where can I get it?

@1AAuto 6 жыл бұрын

+Kendry Rojas You can find the covers here! www.1aauto.com/2007-09-toyota-camry-bumper-fog-light-cover-front-pair/i/1abmk00085?f=632703&y=2008

@danyalmuhammad4803 6 жыл бұрын

Instead of using the add-a-fuse that you used, would the fog lights work if i connected that power wire directly to the battery just like the first one. I know they would be on with the ignition off and I would have to use only the switch to turn them off but would that work?

@1AAuto 6 жыл бұрын

+Danyal Muhammad If the wiring is there from the factory you may be able to add a factory switch and possibly a fuse or relay to make the circuit active. The dealership might be able to tell you what else is needed. We also sell just the fog lights. Hope this helps you out. 1aauto.com

@danyalmuhammad4803 6 жыл бұрын

+1A Auto Parts No my question is, if I use the same wiring that you used, but instead of soldering the power wire to the add-a-fuse and plugging it into the fuse box, putting a terminal on the end of the wire and hooking it directly up to the battery, would the fog lights still work?

@1AAuto 6 жыл бұрын

+Danyal Muhammad It may work, but we recommend installing them as shown in the video.

@Sledgemasterrrr 2 ай бұрын

Can I do this without a soldering iron?

@oxouk 2 жыл бұрын

I bought and installed this on an 07 Camry and it worked. I noticed that it looks like you pulled the 15 amp fuse and placed it on the top of the add a fuse circuit, however everything else I’ve read states that the pulled fuse should be on the bottom, and the smaller amp fuse on the top. Does it matter?

@AutoRevLife Жыл бұрын

Do you have a reference for this? I'm a complete noob, so I don't really know where to start looking

@alanlee1093 5 жыл бұрын

My car is a 2009 Camry Hybrid with the battery in the back. Can I still install this fog lights?

@1AAuto 5 жыл бұрын

+Alan Lee Yes the process should be similar to the process shown in this video! 1aauto.com

@Shammir09 6 жыл бұрын

How many Amp fuse did you add on the Add-a-fuse?

@DynamicWealthBuilders 5 жыл бұрын

5Amp

@jabhassan6397 3 жыл бұрын

Could y’all do one for a 2015 highlander

@1AAuto 3 жыл бұрын

+jab Hassan We'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

@seedajmi4186 7 ай бұрын

Hello there how can I buy this fug kit for 2011 thanks

@arod0623 6 ай бұрын

Fog light that I bought didn't come with added fuse. So what should I do if I don't have it. Can I still connect the red wire to the fuse box?

@ahanafadil8723 5 жыл бұрын

Hi guys In my car Axio x 2011,my fog light switch is melting after the rain water inside in the fog light bulb, my brother said me to use led bulb,then I have changed my stock and installed new C6 (35watts)led fog light.But after 3months I am facing the same problem again.So what to do now. Please Help me!

@soldiersvejk2053 5 жыл бұрын

Excellent tutorial.

@1AAuto 5 жыл бұрын

+Jiateng Wang Thanks for checking us out. 1aauto.com

@davidmendoza3913 Жыл бұрын

Where I can get that fuse?

@beanlam6223 3 жыл бұрын

on camry hybrid they have electronic gas lid release and eco heat/cool switch on the slot where you are going to install the aftermarket fog light switch. the only fix is to cut the hole near the other switches that is illustrated as a vertical rectangular box. the switch will look protruding not flush.

@1AAuto 3 жыл бұрын

+Bean Lam Thanks for the feedback!

@_tanitani_ Жыл бұрын

Since the battery is in the trunk, where do you connect to the positive main 12V?

@DN-xb8bv 4 жыл бұрын

How to add more fog lights and how to wire it for toyota RAV 4 2007,please

@1AAuto 4 жыл бұрын

+Vu The We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com

@fitzroymystro4322 4 жыл бұрын

Is it the same kit for 2010 le??

@bosvlad617 3 жыл бұрын

I'm having a hard time finding things for my Corolla le same year

@alejandrolarios4116 3 жыл бұрын

Does this work for a 2012 Rav4??

@1AAuto 3 жыл бұрын

+Alejandro Larios It may be a different procedure for the 2012. Thanks for checking us out!

@3819144 6 жыл бұрын

The only place you should install the fog light fuse is the low beam circuit. The reason for this is because there is by-law , the fog light can only work on low beam , not with high beam . So tail light fuse is not a good ideal ..

@chefqueenieleung2007 6 жыл бұрын

Eddie Chung thank you for the info..I was about think get the fog lights I get my headlights HIC with high beam

@omarbeltran8848 2 жыл бұрын

You saved my day bro! I had this lights installed by a local shop but had the fog lights installed in the injection fuse, after I saw your comment all I had to do was to move to the low beam circuit, much much better like that! Thanks!

@davidmendoza3913 Жыл бұрын

So where is good place?

@forgotit6266 6 жыл бұрын

That was easy

@1AAuto 6 жыл бұрын

+Forgot It It's not that hard of a job. Hope this helped you out. 1aauto.com

@anglngr9 6 жыл бұрын

Do u guys know why no one uses the factory cables that are next to it?

@1AAuto 6 жыл бұрын

+anglngr9 If your car has fog lights installed from the factory you can just use the fog lights from the kit and connect them to your factory wire harness. This video shows you how to add the fog light option on if your car did not come with this feature. Here is a link to them fog light kit shown in this video on our website goo.gl/vUGSrx

@anglngr9 6 жыл бұрын

Thank you for your answer, my car didnt come equipped with fog lights from factory is just that in your video you can see the cable there, and in my car is also there, my question is if the wiring is there already, there has to be a way to make use of them, I searched online and they say those cables are there cause toyota doesnt want to do extra work taking them out, they just put them there but they go nowhere. I wish there was someone that uses the preinstalled wiring and showed us how to use them.

@markmokhnach1090 Жыл бұрын

For the hybrid Camry this does not work the fog light covers don’t fit and I already broke one, and the wiring harness is not that same one that is in the video

@zillsburyy1 6 жыл бұрын

why not use the wire harness that was already there?

@1AAuto 6 жыл бұрын

+Tommy Sands This kit would be a direct replacement for the stock headlights goo.gl/SfK4uU

@zillsburyy1 6 жыл бұрын

1A Auto Parts would you have to run all that wiring if you just plug it into the harness that's already there? Then the lights would just come on when you turn on the headlights with no switch to push,

@1AAuto 6 жыл бұрын

+Tommy Sands If your car didn't come with the headlight option but the harness is there you should be able to plug the fog lights in add the correct switch, you may also want to ask the dealer what else would be needed to enable the option. Sometimes you also may need to add a fuse or a relay the fuse box. Hope this helps you out.

@zillsburyy1 6 жыл бұрын

1A Auto Parts I'll check to see if the fuse is there and I don't mind having the fog lights on all the time without a switch

@Hakuna_My_Tatas 4 жыл бұрын

@@waterlevelroute , hey I also have an 09 camry, the LE model. So what do I need to install fogs? I haven't checked, but I'm sure the factory fog light wiring is there. Lmk what you did and what you bought.