Excellent video, articulate, concise and to the point, not the usual bloated commentary and n-part videos found on youtube. Many thanks.

A lot of work, but end result is beautiful. Great job so far.

Nice work Cris! I've never worked with wood veneers but you made it look easy if I ever need to! :)

I just discovered your channel and I am so impressed! I've be a carpenter and furniture maker in the U.S. for 20+ years and almost every time I watch one of your videos I learn something! Thanks for sharing your veneering technique! I am going to try it because I don't have a veneer press. Your videos are just great, thanks.

Very cool! I love how it turned out!

Creative solution. Love your problem solving ideas and videos!

Your dedication to the craftsmanship inspires me. You do great work.

Wonderful - and interesting! Glad you're back making more videos. Best wishes.

The way you cleared the edge, you could also use a router if the pieces align perfectand you can keep them steady. I used to work with a veneer saw and basically that was it: First you saw the pieces a few mm bigger than what you want them to be, than you use a routerbit to clear the edges. And somebody also mentioned this, it's probably best to veneer both sides in case of bending. But all in all it looks good! Looking forward to the next video!

Nice work, especially in matching the grain of the veneer. Bravo!

Great job and excellent decision to split your episode and share it with the community. I love your straight way doing things after study all the ways to do stuff and transform it into your Cristiana style :)

I love the way you figured out how to get what you want with what you were able to get. Very cool.

welcome back! Good video, good tips on veneering.

You can put some doublesided tape on the underside of the ruler with a piece of sandpaper on it. That way the ruler wont move when cutting along the grain.

Your skills grow every day! Love your work, keep it up.

Your videos are always worth waiting for. You did a great job on the veneer.

Beautiful, I love it! The result is amazing!

Nice work! I am about to Veneer a Cabinet end and I was a bit apprehensive about starting the day. You nailed it with this video, thank you!

Looks very nice! Can't wait to see the end result.

I really missed your videos!! i think your work is AMAZING! keep on doing it, love from Bogotá, Colombia.

I have never done this and was looking for instruction. You instruction is CLEAR and to the point. I thank you, thank you so very much !!! :)

Look amazing 👌 Great Job, thanks for sharing tips and tricks😊

Flawless!!! I have been looking for this tutorial (made by a brave woman) for a while. Thanks for sharing. 🙏🏽🙏🏽🙏🏽

Great video - love the little tips and tricks!

That looks great! Looking forward to seeing the rest :)

Great work Cris!

It came out beautiful!!

Nice job Cristina!

Love your work, Great Job!

Great job it looks amazing 👍👍👍

Beautiful work Cris! 👍👊

Perfection!!! very well done! congrats

I love your videos, your style of editing, I look forward to see your work everytimr

That looks gorgeous!

Love your videos. Thank you so much. Please keep them coming!!

Great job, well done.

Your cabinets look amazing!! Keep up the hard work and the amazing craftsmanship!!

Amazing result for being the first try! True talent indeed!

Your tetra tank is awesome! Great aquascaping!

Well great again.. now I have even more inspiration to go try something new

nice result! looking forward to your next vid.

Great! One Little Tip. If you overlay the veneer on the long site and then cut them together off, the sites of the veneer will fit perfect!

Thanks for this tutorial! I´m going to have to do the same to re-veneer my speakers as their veneer is falling of due to age, nice video!!

Looks good..veneers are tricky. A quicker/ easier way to cut a straight edge is the same process you did with the two pieces of plywood but instead of a sanding block, rip it on your table saw.:) I tried every which way possible too & someone told me about using the table saw and I got awesome results😁 it was so fast and easy. Just thought I'd pass that tip along to you since you'll be doing a lot of veneering.hope that helps u and anyone else in that same situation actually saw it in one of my videos last year. Look fwd to seeing ep16🍻✌ oh and I like the plywood with the rounded Edge to smooth it out instead of using a " Jroller" I got to try that thanks for the tip 👍👍

This is inspiring! Nice made panels in the ending shots! Noe i want to try out vineering wood aswell!

You did such a good job!!!

Muy buen trabajo!

wow.. respect, that has been a lot of work. Thanks for the inspiration!

Nice touch Well done 👍

I like your videos, thank you for doing all kind of stuff :)

Nice grain continuity between the sections. Great job

Br aqui, amo esse canal!

Wow, this is hard work!

You're back!

Your just amazing! I love to watch your skills. I've followed your channel almost from the beginning. Keep on the good work.

Looks great!

Wow, excellent work

Thanks for sharing. When your kitchen project is finished... I will wait for a cooking video. 👍

Excellent because you make it look so easy. 👏🏻👏🏻👏🏻🙏

looks great!

OMG, you make a plywood sandwich, and than you sanding the edge of the veneer. I like this part. My problem has solved!

Excellent. Thanks for sharing!

Excelente trabajo

Pretty cool!! I have always been afraid of large "glue ups" with contact cement. Looks like you handled it just fine and the result looks awesome. Our big box stores often have oak and birch plywood , but its "face" is often scratched or has an ugly grain. This would be a way to solve that.....

AWESOME!!! Great job!!

Nice work. Just some advice, to cut veneer with the grain is not hard. Pass the cutting knife using the ruler in very light passes just hard enough to scratch the surface going deeper with each pass. this creates a groove. After 3 -4 light passes the knife will then cut straight following the groove and not the grain. Also when veneering real wood , ply and to be safe mdf especially when the substrate is thin, you should veneer both sides to prevent the board from warping. this is why plywood always comes with an uneven number of plys. The hidden side of the board can be veneered with the off cuts. This is also the way pre veneered boards are sold such as A/C ply. ie one good and one not so hot side. As I said this is Just advice not trolling

Looks great

great job chris👍👍👍 very good content. thanke you🍀

we want more!!! just great job!!!

this is the best i've seen on veneering...

Cool information about veneering...Thanks for sharing it

Hi, thanks for sharing, I wasn't sure if I can make it myself, now I know. Can you tell me please what thickness of veneer have you used for cabinets please? would you think that will do for worktop as well?

welcome back

Nice work thanks for sharing this. Question: What would you do if the bottom edge has bubbled due to steam exposure? Can it be flattened back to shape? how? thanks

Nice work

Yeeeeey, videos from you!

Awesome work as always. Why did you decide to use contact adhesive instead of your regular wood glue / Titebond? Did it provide you with an advantage regarding the drying time? I totally understand why you weren’t able to get veneer-specific glues.

So cool!

Gostei da ideia do aplicador de cola que vc usou. Parece bem flexivel. Que tipo de material você usou nele?. Do you are portuguese or you are from other country and live in Porto city?

Your videos are great :D

It will be pretty good to see this when its finished. It looks cracking already.

Fantastic effort. Glad I watched...... but I am pretty sure that I won't ever give this a go. I'm bound to stuff it up.

you literaLly saved my life! THAAAAAAAAAAAAAAAAANK YOU!

Good job....

you can also sandwich the veneer and then use a handplane to get a perfect edge. At least thats the way we learn to to it here in germany. Keep up the good work, i really enjoy your videos! :)

Nicely done! I was quite lucky cutting veneer with a rolling knife (?). That things, that look like pizzacutters... As long as you keep up pressure´, the blade does not wander around.

you're freaking cool and inspiring.

Amazing! 😍

Que trabalhão!!

I have to say I Lov u.its your friend from tanzania.You made nice work Queen.Welcome tz

pretty cool

J Martins arranjam todo o contraplacado acabado com o tipo de folha que necessitas e também folha de várias grossuras e cumprimentos

Nice job 😍😚

Thanks so much

Cristiana, onde conseguiste o laminado? Procurei em algumas casas (tipo Aki e etc) mas não encontro... Em Viseu não ha muitas casas especializadas nesta matéria :(

So cool

Hey nice video. How do you tidy the edges? Like if I do the sides as well?

Could you do a demo on how to use lacquer for table tops and other wood furniture?

Awesome

THIS is what I wanted... a "how to" for people who do NOT have all the fancy equipment, a dedicated veneer cutting tool, vacuum sealer bag, etc. Nice explanation, and excellent way of de-mystifying the process. Thumbs up all the way! Your accent is cool, too! :)