how to assemble fuel injection pump L1801,L1501

Рет қаралды 43,425

tractors&marine MECHANIC

3 жыл бұрын

Пікірлер: 51

@RobertStrickland9619321 3 жыл бұрын

This is possibly the most detailed video on these pumps that I ever saw. Thanks so much.

@tractorsmarinemechanic 3 жыл бұрын

Thank you for watching.pls.subscribe,like and share.thank you

@RobertStrickland9619321 3 жыл бұрын

@@tractorsmarinemechanic I can't say for certain, but this may be the 100% exact match (Equivalent) to 724070-51700 (Yanmar Injection Pump) on my 2qm15 engine

@OlegVagin 3 жыл бұрын

Thank you for sharing your knowledge

@danjimielson 3 жыл бұрын

Hi I rebuilt mine too get some parts unstuck and now the tractor runs good but it leaks around the fittings at the top. Seems maybe the o ring is too rotted. Do you know what torque to tighten the top fittings or where to get a new oring? Thanks

@kiendiep 2 жыл бұрын

you repair very professional, ok.

@tractorsmarinemechanic 2 жыл бұрын

Thank you for your complements.

@unclogitfastcom 2 жыл бұрын

Does this pump pull out or is there linkage in the motor to disconnect first. Yanmar 2210. Looks to be the same pump.

@tractorsmarinemechanic 2 жыл бұрын

Disconnect to cleaned the plungers

@Papg1963 11 ай бұрын

Hello. At 13:25 in the video with the 10mm screw with the blade on the right side what are we adjusting?

@wilbertjuniorsaint-cyr4836 10 ай бұрын

Hi . Thank you for that wonderful video. I did exactly as shown in the video . The pump still doesn't inject. What should I do? Thank you.

@tractorsmarinemechanic 10 ай бұрын

Just watched in follow what I did.do you also re assemble or replaced the plunger?

@wilbertjuniorsaint-cyr4836 10 ай бұрын

Hi. I put the plunger back. I have been told that the plunger might be the reason why the pump doesn't inject . It has to be out back the correct way. Do you have a video that shows how to do it?

@jonathanvaldez3958 2 жыл бұрын

New subscriber sir..pinapanood q mga vids mo sir.gling mo mekaniko.. Ung father q sir may luma na L1801,ask q lng qng marami p b mbbli na spare parts nia..?

@tractorsmarinemechanic 2 жыл бұрын

Ung partekular n part pki name para mkahap Tayo.

@mmomsboy 2 жыл бұрын

The thing for me is can the internals be changed around somehow to give full fuel to the left instead of the right on the moving rack. The governor on an MWM similar engine when started seems to snap to full throttle with the incorrect Bosch pump I located.

@tractorsmarinemechanic 2 жыл бұрын

If you change the internals which is the flunger. your engine will be wild or runaway

@mmomsboy 2 жыл бұрын

Thanks for reply I'll try again after watching your video!

@sumanmondalsuman7635 2 жыл бұрын

Thanks you

@user-uh6im7vk7m 3 жыл бұрын

Привет молодец чей насос

@joshhowland9573 3 жыл бұрын

Is that long pin n the thing it goes into magentized

@mmomsboy 2 жыл бұрын

Just suction I believe..

@slesar-podpolshcyk 11 ай бұрын

Підкажіть, будь ласка, помпи у z500 i zb600 взаємозамінні?

@marioc9231 3 жыл бұрын

Hello. What is professionality called a big spring for the pump. J wants to buy because the spring in my pump has brken.

@tractorsmarinemechanic 3 жыл бұрын

The big spring is PLUNGER SPRING and the small one is DELIVERY VALVE SPRING

@tractorsmarinemechanic 3 жыл бұрын

Pls subscribe to my channel,like and share.thank you sir

@tractorsmarinemechanic 3 жыл бұрын

The big spring is PLUNGER SPRING and the small one is DELIVERY VALVE SPRING

@HEYJIMMAY 3 жыл бұрын

What’s the main cause for these pumps not pumping enough fuel? I have a 1110 Ford with Similar pump and it’s not pumping enough fuel on one side?

@tractorsmarinemechanic 3 жыл бұрын

Thank you for watching.delivery valve maybe stuck-up or plunger need to replace.did you rebuild your pump or not?

@HEYJIMMAY 3 жыл бұрын

@@tractorsmarinemechanic not yet I haven’t. I can’t seem to find parts for it

@freakboinate82 3 жыл бұрын

My pump has gotten water inside it and now it won’t pump diesel! Can I disassemble the top and clean all the parts and be ok?

@tractorsmarinemechanic 3 жыл бұрын

Do it man.your plunger maybe stuck up because of water inside your pump.you can fix it by metal polish.watch another video that I'm using with metal polish.clean your fuel tank and replace fuel filter.

@tractorsmarinemechanic 3 жыл бұрын

By the way thank you for watching.pls subscribe and share my video.

@freakboinate82 3 жыл бұрын

@@tractorsmarinemechanic Thank you for the fast response! I subscribed,liked and shared!

@tractorsmarinemechanic 3 жыл бұрын

Thank you.you can repair your own injection pump i knew you can do it by your ownself.do not send to the calibration center.they cannot calibrate that.the only they can do is to repair or replace plunger.thank you.

@freakboinate82 3 жыл бұрын

@@tractorsmarinemechanic Ok. Thank you!! A new pump cost 600.00 U.S. Dollars and a rebuild is 500.00 but the pump looks simple!

@lgvmobile 2 жыл бұрын

Can you do a video on checking injection timing?

@tractorsmarinemechanic 2 жыл бұрын

What kind of engine do have? Just subscribed and I show you someday.

@lgvmobile 2 жыл бұрын

@@tractorsmarinemechanic iseki 2cyl Mitsubishi KE75 I subscribed and re cleaned injection pump using your videos...im getting fuel but need to check the timing I have no shims to adjust or don't know how?

@wlhequipment1730 Жыл бұрын

@@lgvmobile same boat here, KE95. I thought there was supposed to be a big shim under the pump, but all I had was a gasket. Did you ever figure out how to set / check your timing?

@tractorsmarinemechanic Жыл бұрын

There are 3 shim under the injection pump and remove the gasket just put the shim only.

@wlhequipment1730 Жыл бұрын

@@tractorsmarinemechanic Thank you! We are taking about under the pump mounting flange? Where the pump mounts to the engine with 4 bolts? We are supposed to remove the old fiber gasket and install shims where there were no shims before?

@user-uh6im7vk7m 3 жыл бұрын

Кмз 012 подходит

@tractorsmarinemechanic 3 жыл бұрын

Thank you for watching.keep subscribing