Рет қаралды 1,312
In this episode, we'll show you how to build and assemble a working mini replica of the Commodore PET computer. As part of this project we’re also going to show you how to add multiple Vice systems to RetroPie, and we’ll also show you a little trick on how you can get your Commodore emulators to boot right to BASIC from RetroPie.
Links
Commodore PET Mini: commodorepetmini.com/
RetroPie: retropie.org.uk/
belenaEtcher: www.balena.io/etcher/
VICE: vice-emu.sourceforge.io/
PARTS LIST
----------------------
CanaKit Raspberry Pi 3B+: amzn.to/3idZRGT
- OR - CanaKit Raspberry PI 4: amzn.to/3swuKLE
UCTRONICS 3.5 Inch Touch Screen for Raspberry Pi: amzn.to/38BYmiG
- OR - Waveshare 2.8 Inch LCD Display: amzn.to/3oI5C2b
HDMI Ribbon Cable: amzn.to/35DyH7d
Micro USB Panel Mount Cable: amzn.to/3qaXxmO
Rocker Switches: amzn.to/38FRAbN
Jumper Wires, 3.9 inch: amzn.to/2LK7vwL
High Strength Magnets (10x2mm): amzn.to/3i7nLnA
Speakers, 2W 8Ohm: amzn.to/326JNRe
Mini Digital Power Amplifier Board: amzn.to/35xUDRl
Operation 8-Bit is a grass-roots not for profit group that helps to support charities like the Tour De Force 9/11 Memorial Bike Ride and the Armed Services YMCA (ASYMCA) by raising funds through the restoration and resale of classic computers and video games.
For a complete list of charities we support, or to learn more about us, please visit our website: www.operation8bit.org/
Follow us:
/ op8bit
/ operation-8-bit
Support us on Patreon
/ operation8bit
#Commodore #CommodorePET #RaspberryPi #CommodoreMini #Retro
#3dprinting #cbm