How to Build a Hipped Roof, Proper Job
Рет қаралды 99,352
Жыл бұрынTracer Deep Hole Construction Pencil
🛒 amzn.to/43zTSmA
Dan's Roofing Square & App:
🛒 www.essential-carpenter-tools...
ForgeFast Timber Fixing Screws:
🛒 amzn.to/41TxHaR
Purchase the Delta Pro from the EcoFlow official website:
🛒 uk.ecoflow.com/collections/pr...
Roger and Dan demonstrate how to calculate and build a hipped roof.
A hipped roof is sloped on all four sides, while other roofs may only have two sides that slope.
A hipped roof is more stable against wind and snow and aesthetically pleasing.
The sides of a hipped roof are usually at the same angle but can also be varied for a more unique look.
=============================
#DanCox #roofing #woodworking #carpentry
🔗 Skill Builder Link Tree: linktr.ee/skillbuilder
👍 Tell us what you like: skill-builder.uk/vote
📪 Ask Skill Builder: skill-builder.uk/send
🎥 TikTok: / skillbuilder
📖 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: kzfaq.info...
💧 We Support Charity Water: www.charitywater.org
◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.
✅ ▶ ⏩ 🔘 ⚫
@theyard6958 2 ай бұрын
Thank you for this. The video was very informative and clear. it answered many of my questions, as well as showed me other things I hadn't even thought of. From the Pacific North West, I thank You!
@kellypeters1734 Жыл бұрын
I am fully impressed! It’s just a complete kzfaq.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 plan with the best resources and step by step instructions . These shed plans are so satisfying as if the sheds build themselves on their own. Worthy work Ryan!
@tomwills2309 Жыл бұрын
I learned hipped roofing on my level 3 diploma course at college 6 years ago. Working out the hip and jacks always confused me as we were taught with a geometric drawing with a compass and 3 bevels. I’ve watched all Robin’s roofing videos and not taking away anything from Robin as his a great carpenter but explaining how he works it out confused me aswell. This is the first video that actually made sense to me to the point where Dan has explained how to do it practically with simple explanation to the point where this has all just “clicked” in my head with roofing. It’s made that much sense that the next roofing job that comes along I’d be confident to take it on and not shy away from working out the hips and jacks. Thank you Dan!
@Ultimate-roofing-square. Жыл бұрын
That’s great to hear Tom. Sometimes you just need that explanation to make it click. Happy roofing! Dan.
@SkillBuilder Жыл бұрын
Hi Tom We produced this video with Dan in response to comments on previous videos we have made on the same subject. It was clear from the comments that we needed to slow it down and go over the points in more detail. I am so glad it has done the trick, it is a great moment when you get something, that lightbulb moment is what makes it all worthwhile. It is well worth watching Dan's playlist because he has really covered all the key aspects of roof construction now.
@Harry-nc7zi Жыл бұрын
By far the best and easiest explanation, no need for a maths degree just common sense 👍
@elliejake11 Жыл бұрын
Love a roof video, as a builder I always look forward to the roof construction, every days a school day when Dan’s about. Cheers lads 👍
@montedaestrada3563 Жыл бұрын
Roger! What a fabulous video with another Master of his Craft. There are so many subtle gems of information within it. I will definitely be watching more of Dan's videos. His angle tool is amazing. I hope he has it patented.
@SkillBuilder Жыл бұрын
I am glad you picked up on those gems.
@user-yt1nb4pf8j Ай бұрын
Hi Dan and Rodger I’ve been in the trade for many years general carpentry but have over the years fitted a few roofs trusses and cut and pitched,loved your vids so much bought Dans roofing square as I have a small roofing job coming up very pleased when it arrived but like many carpenter thought I could improve it (oh dear ) so noticing that you used a clamp to secure rafter ready for cutting I thought why not drill and countersink a couple of holes so I could use screws for the same result; that I’ve done so will see ! Keep the vids going Phil.
@thetallcarpenter Жыл бұрын
A great, simply explained and easy to follow masterclass on how to mark and cut in hips and jack rafters👍It's videos like these that are really going to help people wanting learn more about this aspect of roofing carpentry👊 It's just a shame all those sweet joints have to be taken down😢
@Ultimate-roofing-square. Жыл бұрын
Thanks Del. 🤝
@thetallcarpenter Жыл бұрын
@@Ultimate-roofing-square. 👍😎
@marktyler9464 Жыл бұрын
the clearest explanation I've ever seen . Well impressed by you guys . ps your square is superb. thanks both
@SkillBuilder Жыл бұрын
Thank you Mark, that is what we were aiming for.
@Pilgrim-SG9392 Жыл бұрын
@@SkillBuilder Great video and the square looks really useful, where can I buy one?
@peadaroloughlin3270 Жыл бұрын
@@Pilgrim-SG9392 There's a link in the video description when you click on 'show more'...
@user-oh4sd2ib4z 11 ай бұрын
Just built a garden building using this method, amazing tool, all cuts bang on 🙌
@papaherms63 Жыл бұрын
I didn’t understand any of that but it was fascinating. Cracking job lads
@koro287 7 ай бұрын
Hi Guys, i just screwed up my carport roof by following an american video that stated the seat cut for a hip rafter be lowered by half the thickness of the hips width. This made no sense,but he was a teacher of sorts and i bulldozed along and they of course were too low in relation to the commons. What a royal cock up! should have followed yours. Cheers.
@marlowjoinery9783 Жыл бұрын
Having the hip degrees already worked out is a great feature on this square
@nickhickson8738 Жыл бұрын
Fascinating. Two brilliant blokes.
@markellwood4132 Жыл бұрын
I wish I had this resource years ago. Teachers at school were never interested. Thanks
@CORRIGEEN71 Жыл бұрын
Great video roofing is simple if the wall plates are square
@peterdavies9277 Жыл бұрын
Never built a roof and never will. Strictly low level DIY for me but I found that fascinating. Skill - hard to define but easy to recognise. Nice one!
@SkillBuilder Жыл бұрын
Glad you enjoyed it!
@s.wilson5675 Жыл бұрын
Artists at work. Well done guys!
@dominicfrench6708 Жыл бұрын
I’ve alway been impressed by roof builders, love the content, need to watch this 10 more times
@benfurbank Жыл бұрын
I'm teaching guys how to do this and I like the way you've shown this and will try to keep it as simple and practical for the guys.
@SkillBuilder Жыл бұрын
Glad it was helpful!
@denty32 Жыл бұрын
Great video Dan and Rodger 👏👏
@Ultimate-roofing-square. Жыл бұрын
Thanks Mark.
@mikeeh20 Жыл бұрын
Great video clear and informative massive respect Mikee
@LeeTillbury Жыл бұрын
Good work Daniel 👍🏻
@briantrueman3505 Жыл бұрын
Top lad Dan ‘ Roger has got some great mates brilliant watch keep the great work/videos coming 👍👍😘
@Doug.... Жыл бұрын
Nice one Dan. I actually understood that. 👍👍
@SkillBuilder Жыл бұрын
Good to hear! That was the aim, I think Dylan's graphics helped a lot
@amazing451 Жыл бұрын
Childs play all that to you Dan, great job and ps, I'd created my own playlist for all your tips and videos long ago. Hope your back soon. 👏👏👏
@Ultimate-roofing-square. Жыл бұрын
Thanks Kevin.
@JamesOStanworth-Wang Жыл бұрын
Roger - you have a talent for explaining step by step. In a lot of these type of videos folks rush over things -- I guess because they are so used to doing it everyday. Simple, key details get over looked that way.
@SkillBuilder Жыл бұрын
Hi James I am glad that you can see what is going on here. Daniel is good but, like all tradesmen, he could lose his audience by not explaining things. I did a teacher training course many years ago with the intention of teaching at colleges if ill health prevented me being out on the tools. Thankfully it didn't happen but it came in handy on this channel.
@JamesOStanworth-Wang Жыл бұрын
@@SkillBuilder A couple of quick specifics from this video: first, the common rafter length you calculate overhangs the building -- but by how much? and second (sorry I probably missed this) how do you calculate where to cut the bird's mouth? Thanks again. I get the feeling there is something here for everyone from the DIY enthusiast, like me, who is trying to work out the basics through to the professional who can pick up a few extra tips from their collaagues.
@ABRAHAMODEKE 11 ай бұрын
Great work
@vinnysurti Жыл бұрын
Building Roger’s Doghouse for when the Mrs kicks him out 😂
@loafersheffield Жыл бұрын
Loafer lives in a detached garage, guarded by spiders. The missus is an arachnophobe.
@gdfggggg Жыл бұрын
Again
@MrJFoster1984 Жыл бұрын
🤣👍
@mikegriffiths3440 3 ай бұрын
Brilliant!
@SJWardBuilders Жыл бұрын
Fantastic video Dan and Rodger with great illustrations! Dan I've received my square and id like to tell you and any one else that's reading this just how good it is!!!! If you are interested in Dans square its worth its weight in gold!! Don't take my word for it try it for yourselves
@bloggs692413 6 ай бұрын
really helpful info on this taking actual measurements instead of all the different apps makes it alot easier to get a grip of thank you skill build
@agrennan5411 Жыл бұрын
Thanks been watching lots of your roofing videos I found this one very helpful with the animations hopefully after a few watches will take this in I've only been taught how to install trusses when it comes to roofing
@AndyCarnegie 4 ай бұрын
This was really well explained and made complete sense. Brilliant!
@lazylad8544 Жыл бұрын
Good advice about the 600 Centres. And the isolation value. Thanks. Good video. I knew Rodger wanted to be a wood spoiler all along.
@liamgibbons2117 Жыл бұрын
Just a phenomenal video with perfect information.
@SkillBuilder Жыл бұрын
Glad you liked it
@manayconstruction5861 Жыл бұрын
Just used forgefast fixings yesterday, one of the boxes was 6 short.....now i know where the other 6 are😁. Top informative video as ever gents👍👍👍🔱🔱🔱.
@lukekovacs-hoy1651 8 ай бұрын
Am a joiner thats never covered roofing when serving my time this helped today when i had to do my first hipped roof 👍
@issachunt7578 8 ай бұрын
Thanks boys, I don’t do many roofs! But I always over complete things, you make is so simple. Thank you so much for sharing…👍
@ianowens1577 Жыл бұрын
Dan's da man! Good job mate.
@KG6AFF 5 ай бұрын
Excellent! Love the proper English accents, great coverage very instructional, thank you for teaching everyone! ... the cm comparisons will come in handy while I'm living and building in Hungary after living 40y in California (Oregon) ... and then was merely a little interested in building NOW im very interested in creating a few geodesic dome and octagon small buildings starting out and practicing on small and later using what I learned to build large house sizes. of the same.. all these tips are excellent and very helpful, along with 2 years of wood shop in Paradise Ca high school... 1987... -tibor
@waelah5554 3 ай бұрын
The best video on the subject
@barnescarpentryservicesuk2811 Жыл бұрын
Lovely job lads ❤
@Ultimate-roofing-square. Жыл бұрын
Thanks Andy.
@matthewmurphy750 Жыл бұрын
Top class thanks lads
@tonynolan6334 Жыл бұрын
I want to build a hipped roof on my summer house project at a 30 degree pitch. The perfect video. Just wish you went on to do plumb and seat cuts!! Great vid lads!!
@SkillBuilder Жыл бұрын
That is all in the previous video where we started with a simple up and over. Dan has lots of videos on our channel kzfaq.info/get/bejne/hbl0iL2Bu56rcmQ.html
@self-preservationsociety7057 Жыл бұрын
You two are talented craftsmen , and make cracking videos too . Cheers lads
@SkillBuilder Жыл бұрын
One talented craftsman and one getting in the way
@Ultimate-roofing-square. Жыл бұрын
@@SkillBuilder 😬
@self-preservationsociety7057 Жыл бұрын
@@SkillBuilder see you on the next one
@ladytradiej8027 Жыл бұрын
Awesome video!
@adrianaosirish6065 Жыл бұрын
Great stuff !!
@Ultimate-roofing-square. Жыл бұрын
Thanks Adrian.
@mitchmix999 Жыл бұрын
Excellent video
@SkillBuilder Жыл бұрын
Thank you very much! We hope it does well
@martinbrice9802 Жыл бұрын
Dans class great video guys, would be great for you to show us another with valley rafters and lay boards 😃👍🏽 thanks guys really enjoy your content
@mrsbradpittiful Жыл бұрын
Roger had a great technique where he shows how it flops about
@keithbyrne7450 Жыл бұрын
Learned to do roofs using imperial inch rise rafter table and would find it hard to change but this is a very good way of doing it
@SkillBuilder Жыл бұрын
Dan has an American version of the square. It works the same way
@princejude5469 5 ай бұрын
I have learned a lot here as an upcoming carpenter, thanks so much guys
@SkillBuilder 5 ай бұрын
Great to hear!
@Marvelousmelody631 Жыл бұрын
best video thanks
@MrJFoster1984 Жыл бұрын
Just a side not, collar ties and I think for the hip they are called king ties to stop spreading of the roof and potentially the walls? Can't recall as it has been many years since I have built a hand cut roof. Great video lads. Cheers Jerry
@Sebastian-iw5et Жыл бұрын
Great video guys! very informative and a joy to watch. i was wondering; are you guys planning any more instructions like this for different types of roofs? like half hipped roof, and perhaps valleys?
@SkillBuilder Жыл бұрын
We are open to suggestions. All the time we have the rig we can do these in detail videos without the pressure of a customer wondering why we have turned their building site into a movie set. There are some good videos coming up with Dan.
@kendodd8734 Жыл бұрын
Dan definitely knows his stuff although when ever I do roofs I use the scale down and scale up method but as they say there’s many ways to skin a cat
@Ultimate-roofing-square. Жыл бұрын
Thanks Ken. Yes, what ever way works for you best.
@davidbruce5377 4 ай бұрын
Helpful indeed. Gents, would you entertain with a video on deck railing top plates with "Comfort slopes". The top plate is sloped 22 deg for resting on. The learning message is how you miter the outside and inside corners, with a 22 deg slope. Thanks for the consideration.
@SkillBuilder 4 ай бұрын
Great suggestion!
@davidbruce5377 4 ай бұрын
Thanks and hope to see your video on it.@@SkillBuilder
@gordonmackenzie4512 Жыл бұрын
Like how you mention sheeting the roof with OSB or ply. That has been compulsory in building regs in Scotland for many many decades.
@SkillBuilder Жыл бұрын
I know it is a Scottish thing, due partly to the proximity of Sterling board. They say it is due to the higher exposure to strong winds but I wonder if it is something else.
@peefor135 Жыл бұрын
As an owner of one of Dan's squares, an explanation of why the proportional rise in the hip markings are not equal would be appreciated. (In simple language.)
@SkillBuilder Жыл бұрын
There is no easy way to explain it but we will have a go in another video.
@Ultimate-roofing-square. Жыл бұрын
The hip plumb cut is not always the same, it varies each time so it’s marked out irregular.
@SkillBuilder Жыл бұрын
@@Ultimate-roofing-square. Yes he knows it is irregular but, like me, he wants to know why it is not a constant. Somebody explained to to me and it went in one ear and out the other. It is to do with the fact that you are not working in plan. We can discuss this in a future video. It is one of the drawbacks of the traditional carpenters roofing square because it works from a fixed point.
@Ultimate-roofing-square. Жыл бұрын
@@SkillBuilder good idea.
@stakkerhmnd Жыл бұрын
First comment and important comment. My mate, who works for the council, says he was very busy today working on a council house where the council tenant had broken the shower handset holder. It had snapped clean off. It looked like wear and tear had caused the failure rather than the council house tenant being heavy handed.
@Jimbo-rk7tx Жыл бұрын
Love these videos. Could you do one on irregular hips? 👍🏻👍🏻
@SkillBuilder Жыл бұрын
We have one
@lawncarewithtim4896 Жыл бұрын
Love your videos Roger and Dan. Roger how many bleedin cups of tea do you ave! Cheers from Australia.
@ToraKwai Жыл бұрын
i love how dan seems to be using a different writing implement in every close up shot, that's why i keep 3 pencils on me all the time, if i leave one somewhere (as i often do) no has to sit and wait for me to go find it
@SkillBuilder Жыл бұрын
Roger is a pencil thief. Dan starts with three and finishes with none.
@ToraKwai Жыл бұрын
@@SkillBuilder there's always one about
@Ultimate-roofing-square. Жыл бұрын
@@SkillBuilder 😂
@ToraKwai Жыл бұрын
@Daniel Cox sounds like a good excuse to get one of those bungie strings for your pencils, also saves dropping them off a roof
@Ultimate-roofing-square. Жыл бұрын
@@ToraKwai good idea. I do like a few pencils close to hand.
@albieproduction Жыл бұрын
Great Demo, really informative. Can i ask, what Timber did you use for the hip roof?
@stephencracknell5077 Жыл бұрын
Great pitching Dan.. pity Rodger said you can use the square if you want or not, however, if I didn't use your square I wouldn't know the angle of the hip!! So it would be a great follow up video to show people how to find the pitch angle of the hip. Incidentally in Scotland your King common is our Crown rafter...go figure.
@SkillBuilder Жыл бұрын
Hi Stephen We get accused of disguising adverts as HOW TO's so I wanted people to understand that the information holds whether you use Dan's square or not. We don't drag people kicking and screaming to the cashpoint and it works well enough. Daniel had sold out again.
@gingergamer4563 10 ай бұрын
tan⁻¹(tan(P)÷√2) where P is the pitch of your equally pitched roof :) E.g tan⁻¹(tan(30)÷√2) = 22.21 rounded. The tall carpenter also has a practical way of doing it, pretty cool.
@michaelfraser5723 Жыл бұрын
Good skills; bizarre trousers
@patconnelify Жыл бұрын
Will you be on the dragons den to market that new square ? Should Sell itself. Amazing videos 🤙
@tesorotesoro1654 2 ай бұрын
Hi mate ,can you explain why you said you would need a thicker batten on this video ,thanks.. can't get my head arout that .👍
@lukeh3020 Жыл бұрын
Is there any benefit of hipped roofs, other than less brickwork? I always liked the look of gable walls and they give more space in the loft, but maybe I'm missing something.
@paulrumbold2436 Жыл бұрын
Mmmm the run is not the span ? The run is half the span . The end rafter as I taught is the CROWN rafter ( in Hampshire ) . Maybe different in Essex ? Whatever , we still can’t get paid enough? Keep up the good work .
@jamestowsey5821 Жыл бұрын
I was taught to not drop the hip rafter down from the plane of the common rafters like Dan has here. Rather to keep the hip up on plane with the other rafters and cut or plane the dihedral angle onto the hip afterwards. I don't think strength wise it makes alot of difference though.
@Simon78 Жыл бұрын
Wizardry!
@TheStuG95 Жыл бұрын
Great video love watching Dan work on the roofs, just a question is the king common rafter exactly the same size as the common rafters? Keep up the good work!
@Ultimate-roofing-square. Жыл бұрын
Thanks for watching Stuart. Yes it is, as the ridge is the same thickness as the rafters the king is the same length as the commons.
@TheStuG95 Жыл бұрын
@@Ultimate-roofing-square. much appreciated Dan, was the perfect video to come up, only done a handful of roofs and got a hipped one coming up in a couple weeks so was a good refresher to the memory👏👏
@Ultimate-roofing-square. Жыл бұрын
@@TheStuG95 I hope it goes well for you.
@samsingh2042 Жыл бұрын
Hey Dan that t shirt looks the business, had a look on your website, and they are not available. Are they for sale yet.
@Ultimate-roofing-square. Жыл бұрын
Hi Sam, thanks. They are not however I could get some more printed. Keep a eye on my Facebook page.
@jaser461986 Жыл бұрын
Hi guys, is the end king common the exact same length as the commons ?
@ziel0k5 Жыл бұрын
Always wanted to test this by myself, great job 👍 Can you explain why you make that "arc" line, instead of measuring from the top -> square line down and then mark the birdsmouth?
@Ultimate-roofing-square. Жыл бұрын
Hi Robin, as it’s 2 fixed points , ridge and wall plate there’s no need to measure along the top of rafter.
@ziel0k5 Жыл бұрын
Ok, thanks. And how do you determine the angle of 30 degrees.? Did you calculate this, or did you choose this by yourself?
@Ultimate-roofing-square. Жыл бұрын
@@ziel0k5 if you watch the previous roofing video you can see how how we decided on the pitch. Thanks for watching.
@lollahmedhotmailco 10 ай бұрын
help! l have a pitch roof at 19 degrees at 5 meters, steel beam to wall plate what thickness rafters do l use to keep building control happy (should l use a purlin ?)
@steveshaw9254 Жыл бұрын
Hi sorry I'm replying to the wrong video When you drill your damp rods in is there a certain height they go in as the pavement on the front of our house is higher than our floor level in the house Thanks Steve
@fckmunch Жыл бұрын
When focusing on the hight above plate measurement for the hip rafter, it doesn't take into account the level with regard to sofit side. Do you ever need to cut a strip to level it off underneath?
@SkillBuilder Жыл бұрын
That is in the next video. It is common to cut the rafter feet with a level line
@jackstally7861 Жыл бұрын
Am I right in saying the size off the hip rafter’s and the ridge be half the size again of the common rafter.
@Ultimate-roofing-square. Жыл бұрын
The sizes are usually worked out by a structural engineer.
@johnchincotta1qwdb15 Жыл бұрын
In the USA imperial dimensions are still used
@SkillBuilder Жыл бұрын
That is why we mention them. We have many American viewers who struggle with the metric measurements. Dan also has an American Rise over Run version of his square
@johnchincotta1qwdb15 Жыл бұрын
@@SkillBuilder yes they do.Roofing ratios in America are different .its per feet run. Eg a 6 12 pitch means that for every foot or 12" run it rises 6" and so forth. I am personally fully conversant with both metric and imperial units.Metric been the easiest to work with.
@GeorgeOBrien-kt9wf Жыл бұрын
Hi guys, could you explain how you found the ridge height and length?
@SkillBuilder Жыл бұрын
Hi George Try this one kzfaq.info/get/bejne/rtl9rMeZzdKbkaM.html
@VATAN34BAYRAK Жыл бұрын
👍
@Toolsofthepast 8 ай бұрын
What kind of square is that
@BerkeleyTowers Жыл бұрын
Roof porn. Love it! A cut roof done well is a work of art....... And I hate to say it, but a dying skill. One observation about 600 centres that a chippy won't see unless they go on to do the roofing as well, is that you can get tremendous bounce on the battens. If you're slating the roof or using a plain tile and nailing every one, you really notice the difference in stiffness of 400 versus 600.
@SkillBuilder Жыл бұрын
Hi Paul I think 600mm centres are also bad for plasterboarding. I would always choose a 400 centres layout.
@nonoyorbusness Жыл бұрын
I thought I'd seen this already.
@SkillBuilder Жыл бұрын
No you haven't. Spot the difference....Clue.........Hip
@nonoyorbusness Жыл бұрын
@@SkillBuilder Ah, well, OK, thanks!
@redx11x Жыл бұрын
Why do we use screws in the UK, when in America they use nails. I heard they said nails allow for more flex of the roof. Can someone let me know which is better
@bungleford Жыл бұрын
Nails do have more flex than standard wood screws. It's also a lot quicker to use a nail gun than it is to put in screws. I think Roger is using screws for this so that it can be dismantled.
@gdfggggg Жыл бұрын
@@bungleford 👍🏻
@johnclark9712 Жыл бұрын
Does anyone know the name or brand of Dans pencil he is using 👍🏻
@SkillBuilder Жыл бұрын
Hi John, it's the Tracer Deep Hole Construction Pencil - Here's our affiliate link: amzn.to/3NmUpCJ
@martinpanks992 Ай бұрын
Carnt beat roof trusses😂
@richardsekula3048 Жыл бұрын
what is the name of the cool square
@SkillBuilder Жыл бұрын
It is The Ultimate Roofing Square from Essential Carpenter Tools. The details are in the description
@scottmason8529 Жыл бұрын
Robin clevett vs dan cox. Who is better?
@Ultimate-roofing-square. Жыл бұрын
It’s no competition.. just a bit of fun roofing.
@SkillBuilder Жыл бұрын
Scott Mason How would anyone ever come up with the criteria to judge? Is it about speed or accuracy? Does a millimetre here or there, or a even few seconds make any difference? In the end it is about having a nice day filming the build. Hopefully that comes across in the video. If you haven't seen it I urge you to watch Dan's Oast House kzfaq.info/get/bejne/aMV8gdWpsZjLpnk.html
@edthompson9337 Жыл бұрын
My money is on Dan, less talk and more action than Robin!
@scottmason8529 Жыл бұрын
@SkillBuilder thats pretty obvious isn't it - higher standard of workmanship, better industry knowledge, speed at getting the job done. Personally, I think they are both fantastic carpenters just though id see what other people opinions were.
@umefrank3078 Жыл бұрын
About the calculation of the measurements please can you demonstrate in metrics? not in FOOT measurements
@audid00dy Жыл бұрын
Fewer rafters, less cold bridging???
@SkillBuilder Жыл бұрын
Is there a question here?
@audid00dy Жыл бұрын
@@SkillBuilder Apologies if my question seemed like a statement!
@retneprac Жыл бұрын
king sounds better lets just call it that
@SkillBuilder Жыл бұрын
I like Queen
@retneprac Жыл бұрын
@@SkillBuilder either sounds better than end common 😂
@davidbarclay6293 Жыл бұрын
I'm sure I have watched this before.
@SkillBuilder Жыл бұрын
You have not seen it. This is the hipped roof which is different to the gable end that we did a few weeks ago.
@davidbarclay6293 Жыл бұрын
@@SkillBuilder and that my friend is the reason why I'm stuck in an office. Should have paid more attention when watching the last video.
@dorothymartin8557 5 ай бұрын
Even better, DON'T build a hip roof. Build a stronger regular roof.
@Shaggy-8392 Жыл бұрын
Sick and tired of cowboy builders in southend. We need regulation to control who can do work or not now and several punishment for lea ing customers in vulnerable positions such as no heating, water secure, electric certified etc.
@andywarwick2342 Жыл бұрын
🤣Just heard you on GB "news".............stick to the DIY tips......otherwise you will be accused of "using your voice" to forward your agenda like GL.
@SkillBuilder Жыл бұрын
Andy That is very good, do you think Skill Builder will sack me?
@andywarwick2342 Жыл бұрын
I do not have an opinion. Are you concerned for your continued employment ? Do you think the BBC will "sack" GL......?
@StanTheMan-us3tp 7 ай бұрын
Forgot to mention, must have 25 years experience
@SteveAndAlexBuild Жыл бұрын
Always great videos from you two . I like the extra details this time too 👌🏼. If we were brave enough to tackle a roof I’d buy a square for sure . We will be using Forgefast screws on todays project a fence repair 💪🏼👌🏼🧱👍🏽
@Ultimate-roofing-square. Жыл бұрын
Thanks chaps. Let me know if your going to tackle a roof. 😉
@SteveAndAlexBuild Жыл бұрын
@@Ultimate-roofing-square. 😁🧱👍🏽
Sawdust and Wood
Рет қаралды 773 М.
MR A BUILDERS
Рет қаралды 9 М.
gregvancom
Рет қаралды 314 М.