How to Build Cemetery Columns for Halloween - main columns and gate (Part 1)

Рет қаралды 48,782

3 жыл бұрын

In part 1 I make the main columns (which come apart into 3 sections for storage) and the cemetery gates.
Follow us on Facebook:
/ hauntforhep
Music by: Midnight Syndicate
Songs: Troubled Times, Awakening, Graveyard, Unhallowed Ground, Crypt of the Forsaken, Winged Fury, The Fens of Sargath
All rights reserved. Used with permission.
For more music from Midnight Syndicate, visit: www.MidnightSyndicate.com
Materials:
For Columns:
-1x4s
-2x4s
-2x6s
-Luan plywood 1/4 in. x 4ft. x 8ft.
-Crown molding
-Owens Corning FOAMULAR 1/2 in. x 4 ft. x 8 ft.
-R-Tech foam 2 in. x 4 ft. x 8 ft.
-Post Pole Light Outdoor Garden Patio Driveway Yard Lantern Lamp Fixture
-flame bulbs
-10 or 15 ft. extension cords
-4 hinges (2 per column)
-Pool noodles
-nuts and bolts to connect the column sections and the gates
-White Flexbond for hard-coat
For Gates:
-1/2s
-2x2s
-1 in. PVC
-3 in. PVC
-Luan plywood
-4 Solid Unfinished Ball Finial for 1-1/4" Rod - Capitol City Lumber
-Foam paper for finials
Paint: (all outdoors)
-Black, white, brown, green, turquoise, beige, white spray paint

Пікірлер: 155

@VanOaksProps 3 жыл бұрын

Outstanding job! They look amazing and you did a really good job explaining the whole thing. Happy haunting!

@AndrewLong 3 жыл бұрын

Thanks again and you too!

@StevesHauntedYard 3 жыл бұрын

Wow. Very detailed how too. Love what you have made. Great job!.

@AndrewLong 3 жыл бұрын

Thank you so much!!

@1hihum007 3 жыл бұрын

Amazing design and build! And great work on the videos as well! You did an amazing job of explaining everything step by step, and gave all of the important details! Best videos I’ve seen on a build like this (or almost any home built Halloween project for that matter) bar none! 👍🏻

@AndrewLong 3 жыл бұрын

Thank you so much, means a lot especially when there are a bunch of other columns builds out there! I've got some new ideas for pneumatic props and builds for next year and I will definitely be doing videos on them!

@shannamartin9460 3 жыл бұрын

Thank you for all the work you put into both the haunt and these videos. It's really cool to see the tools, materials, and ideas come together; your attention to detail is at a level that makes the end result really special and worthwhile. Thanks, now I want to start building again! Looking forward to next years additions. Congrats, and best of luck in your studies! 🎓

@AndrewLong 3 жыл бұрын

Thank you so much! Good luck building!

@roxburyhauntedmanor8147 3 жыл бұрын

These columns look amazing!! Nice work!

@AndrewLong 3 жыл бұрын

Roxbury Haunted Manor thank you so much I appreciate it!!

@stevelapierre4776 9 ай бұрын

😳Crikey.. I am impressed and in awe... Ace Mate for all that work and just brilliant idea of how to make solid columns and the techniques and materials and how nice you explained it all just floors me.. AMAZING!!! they look so real and perfect.. I made a fake fireplace with tiles and similar way as you but this gives me ideas on Halloween and for in the house too.. I LOVE IT.. just wicked .. thank you for sharing and applause for the entire project...!!!😊🥇🏆👏

@AndrewLong 9 ай бұрын

Thank you so much for the kind words! Good luck with your further projects!

@stevelapierre4776 9 ай бұрын

@@AndrewLong You are welcome and stay safe and take care..!! again love the videos..!

@chelleb3055 Жыл бұрын

These are a dream for a home haunt! I love every single thing you've made so far. Great work!

@AndrewLong Жыл бұрын

Thank you!!

@peterheynen 2 жыл бұрын

A great job, it looks AMAZING!!

@AndrewLong 2 жыл бұрын

Thank you!!!

@RYU583 3 жыл бұрын

Looks great. You nailed that look. Well done 👏

@AndrewLong 3 жыл бұрын

Thank you so much!!

@letitgrow1846 3 жыл бұрын

Thanks for such a detailed video on how to replicate these. This is one of the best Halloween diy videos I've seen. I'll definitely be giving them a go.

@AndrewLong 3 жыл бұрын

No problem and Thank you for watching!! Good luck building and if you need any help lmk!

@billpearson8360 9 ай бұрын

Amazing creativity! Great video and incredible cemetery entrance!!

@AndrewLong 9 ай бұрын

Thank you so much!

@CindyOrangeNeely 10 ай бұрын

Absolutely GORGEOUS!!! I love❤ it!!!!!

@AndrewLong 10 ай бұрын

Thank you so much!!

@spookmastercam4534 3 жыл бұрын

These turned out great! Nice job!

@AndrewLong 3 жыл бұрын

Thank you so much!

@AmandaDevon 2 жыл бұрын

This is so amazing, great job!!

@AndrewLong 2 жыл бұрын

Thank you so much!!

@tylermarkham3411 Жыл бұрын

This is pretty awesome, way to go!

@AndrewLong Жыл бұрын

Thank you!!

@haywardhaunter2620 2 жыл бұрын

Making the finials out of craft foam is brilliant! It really makes the gate feel imposing.

@AndrewLong 2 жыл бұрын

Thank you! We’ve been making all of our finials out of the foam paper for our haunt the past 7 years! Super easy to make.

@ToilandTroublesDIY 2 жыл бұрын

Just came across your channel and you have made some great props! Keep up the good work!

@AndrewLong 2 жыл бұрын

Glad you found us and thank you very much!

@williammolinari9153 3 жыл бұрын

Very nicely done!

@AndrewLong 3 жыл бұрын

Thank you!

@Whentheshitterisfull Жыл бұрын

Bro that looks awesome. Great job

@AndrewLong Жыл бұрын

Thank you!!

@springwoodorphanage7440 3 жыл бұрын

Nice work brotha looks great!

@AndrewLong 3 жыл бұрын

Thank you!

@rob3pivot Жыл бұрын

Fantastic job!

@AndrewLong Жыл бұрын

Thank you!!

@deniseclepper1436 9 ай бұрын

Very impressive!

@AndrewLong 9 ай бұрын

Thank you!!

@Totalballa41 11 ай бұрын

Amazing how you are giving the dimensions of everything as you go🤌🏻🤌🏻🤌🏻😩😩 So many videos don't and just expect people to guess when they want to make it themselves. Thank you so much

@AndrewLong 11 ай бұрын

No problem! Glad this video can help!

@rayk141 Жыл бұрын

Awesome build and great details Dude !!!! Thanks for sharing.... Seasons screamingS 🎃

@AndrewLong Жыл бұрын

Thank you much appreciated!!

@davidbuttel3102 3 жыл бұрын

Great work.

@AndrewLong 3 жыл бұрын

Thank you!!

@HollywoodHaunter 3 жыл бұрын

Hey great job on your columns and gate. They turned out really nice. This was a cool detailed vid thanks for posting 😁👍

@AndrewLong 3 жыл бұрын

Thank you so much!! Glad y’all liked them!! Got a few big things planned for this Halloween!

@HollywoodHaunter 3 жыл бұрын

@@AndrewLong Nice, look forward to seeing what creepy creations you come up with.

@AndrewLong 3 жыл бұрын

@@HollywoodHaunter Also forgot to say that I was inspired by a column design y'all had built so thanks for that!

@howtohaunt 3 жыл бұрын

Love your columns! Nice angled tops on the columns and the curves on the gates. Can't wait to see more!

@AndrewLong 3 жыл бұрын

Thank you so much!

@iamthenra1968 7 ай бұрын

Gosh that looks amazing... You are so talented. I am going to do my best to make these. probably won't look as good as yours... if I could hire you I would.

@ThePreachie 3 жыл бұрын

This is dope and should have way more views. Great job bro!

@AndrewLong 3 жыл бұрын

Thank you!

@ThePreachie 3 жыл бұрын

Did you ever do a part 2?

@AndrewLong 3 жыл бұрын

@@ThePreachie yes I just haven’t uploaded it yet because I’ve been busy with my haunt! Should be coming out soon

@deoblo85 Жыл бұрын

Fantastic job they turned out really great !! HFL!!

@AndrewLong Жыл бұрын

Thank you!!

@doneachus6780 2 жыл бұрын

Great Video!

@AndrewLong 2 жыл бұрын

Thank you glad you enjoyed it!

@marissarichardson4467 Жыл бұрын

so good!

@AndrewLong Жыл бұрын

Thank you!

@josefelyferguson 5 күн бұрын

Amazing!

@AndrewLong 5 күн бұрын

Thanks!

@DavidCalamari 2 жыл бұрын

Looks awesome. I have to re-coat my columns this year because my hard coat has started to crack in some spots and I'm worried about water getting in. I used monster bud and Drylok, but it seems like this stuff is a good alternative because of the flex. And cheaper! Nice tutorial.

@AndrewLong 2 жыл бұрын

Yes flex bond is super easy to use! Good luck building!

@karawalkerdesigns167 3 жыл бұрын

Fantastic

@AndrewLong 3 жыл бұрын

Thank you so much!!

@tjmfs1981 2 жыл бұрын

Looks amazing. Would love to see a how to on making your reaper that is next to you early in the video.

@AndrewLong 2 жыл бұрын

Thank you!! Good idea for the reaper video.

@fabianarocha1099 3 жыл бұрын

Amazing

@AndrewLong 3 жыл бұрын

Thank you!

@MrJherson28 8 ай бұрын

Nice. You are a fking good . Excellent job

@timcoulson7340 Жыл бұрын

These look amazing! I'd like to know why you chose to use plywood for the underlying structure instead of foam-board. It looks like you used 1/4" plywood which is pretty light, but wouldn't all foam-board be significantly lighter? And why do you use Flexbond mortar rather than a paint like DryLok masonry water proofing paint? Thank you and keep up the great work!

@AndrewLong Жыл бұрын

Thank you! I chose to use plywood for a few reasons: It’s a lot stronger than foam so will less likely get a hole kicked in it. It’s also a lot easier to attach to the wooden framing. The foam has also gotten pretty expensive recently. I use the flexbond for a hard coat and to give it a textured look. Then I’ll paint it.

@boomcircusltd4762 Жыл бұрын

Thanks for a great tutorial I have been making a set and they are looking great. I was wondering do you know of a UK equivalent of the flex bond? Cheers

@AndrewLong Жыл бұрын

Some kind of mortar or concrete mix with fine aggregate could work as well.

@TheKsmaltbie Жыл бұрын

Hey Andrew, we are in the process of building these. Can you tell me more about the paint? Looking to see if we can buy in smaller batches (the brown, green, and turquoise). Are you able to find them in smaller containers? If so, where? All flat? Thanks so much! Love your explanation, and the columns are amazing!

@AndrewLong Жыл бұрын

Hey! Yes you can get those colors at Home Depot or Lowe’s in half gallons or even the color sample size as you will not need that much. They are all flat as well. Thank you for the support and good luck building!!

@TheKsmaltbie 9 ай бұрын

Hey Again! So…we didn’t have time to finish last year. We started another build for the extra fence columns and didn’t get to make these big ones. NOW…we are finally making them. Can you tell me how wide the piece of foam board is that goes down the center? The one that looks like it separates the bricks. Thanks again!

@rmc1894 2 жыл бұрын

Cannot wait to set up my cemetery this year so exited I wanna get an early start please comment how early I should set it up I don’t wanna be the crazy person in the neighborhood setting up mid September but last week of September would that work??

@AndrewLong 2 жыл бұрын

It is honestly up to you how early you want to set up and how much time you think you will need to get it set up. For us, beginning of October is when we start putting stuff out but we don’t put everything out right away because we don’t want it to become damaged. We run our event three nights during Halloween weekend so I don’t like having everything show ready until two or three days before the event. But if you’re fine with having stuff out in the weather for a month then go for it!

@adamjakubowski8750 10 ай бұрын

Great video! I am attempting to build a modified/smaller version of your design so I can store it in my attic. Do you remember where you bought the light fixtures from?

@AndrewLong 10 ай бұрын

Thanks! Good luck building your own! I found the same ones from Walmart: www.walmart.com/ip/Post-Pole-Light-Outdoor-Garden-Patio-Driveway-Yard-Lantern-Lamp-Fixture-Black-Black/1067866518?wmlspartner=wlpa&selectedSellerId=101280387&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-1651068664266:pla-51320962143&wl5=9059726&wl6=&wl7=&wl8=&wl9=pla&wl10=673602511&wl11=online&wl12=1067866518_101280387&veh=sem&gbraid=0AAAAADmfBIqmLjyleiMTOpzQmcPjZRNA4&gclid=Cj0KCQjwib2mBhDWARIsAPZUn_kwq7ZIHyM-HDfhxzDEOQ3aoC-MDpyz7G9u7X84u-1qIKmAXM4od-MaAiejEALw_wcB

@adamjakubowski8750 10 ай бұрын

Thanks for the fast response! Going to buy them today!

@DnBQemist 2 жыл бұрын

amazing job! what was the paint to water ratio for the weathering?

@AndrewLong 2 жыл бұрын

Thanks! Not sure the exact ratio but just watery enough that it will drip down but enough paint so that it shows up.

@SamanthaCrayon 10 ай бұрын

Do you coat them with anything after painting ? Do you find rain or weather makes the paint run?

@AndrewLong 10 ай бұрын

Nope! The paint should be enough of a weather barrier but you can definitely put a clear protective coat on it.

@user-bk8ib4gv6f 11 ай бұрын

Great stuff (no pun intended). Lol. Do you have a video or tutorial about how you made the cemetery sign? Or could you tell me what materials you used? Thank you.

@AndrewLong 11 ай бұрын

Haha thank you! I don’t have a video on it, but it was made from the 1/2” foam insulation board. I used the dremel with a drill bit to cut out the letters and glued them onto the foam backing piece. I them spray foamed pvc onto the ends so it could be attached to couplings on the columns. I painted the letters with a teal colored paint and aged it with watered down browns and blacks.

@user-bk8ib4gv6f 11 ай бұрын

@@AndrewLong Nice. Thank you. I was wondering if you went with all foam board or a combination of foam board and wood. You do a really good job. Thanks again.

@AndrewLong 11 ай бұрын

@@user-bk8ib4gv6f np! If I were to make it again I would probably use plywood for the backing to strengthen it up. It can bend in the wind so it depends if you get a lot of wind and it be risk of breaking!

@cesalio45g Жыл бұрын

Super cool... Where do you store all your props?

@AndrewLong Жыл бұрын

Thanks! We have an off site storage unit

@jaredalvey2475 2 жыл бұрын

Do you have plans anywhere? What type of bit did you use on your router in the router table?

@AndrewLong 2 жыл бұрын

The video should have all the measurements so I do not have any plans that are detailed enough for building. For the router bit I am pretty sure it is called Ogee.

@rayk141 Жыл бұрын

Questions - for the mixture you are doing with the Flexbond how long does it take to dry? And how well does it adhere to the foam?

@AndrewLong Жыл бұрын

The mixture takes around an hour to fully dry but I try not to use a batch for more than 20 minutes at a time, so I did a few smaller batches for the column. It adheres great to the foam and will very rarely chip/break unless you purposely ram into it. I’ve only had problems with the pool noodles as neither paint or the flexbond likes adhering to it so I would definitely use another material like PVC or carved foam to get a rounded shape.

@rayk141 Жыл бұрын

@@AndrewLong Awesome, Thank you Andrew. Thanks for the videos as well. Seasons screamingS

@AndrewLong Жыл бұрын

@@rayk141 no problem! Happy haunting

@pitnatclem 2 жыл бұрын

I admire your work, your cemetery columns are magnificent. I love Halloween but in France it is so difficult to find products for finishing. I have a question, which product do you use to glue your insulation boards and your pool noodles together? I am in the process of making but cemetery columns but I glue with wood glue, I'm afraid that it will come off over time. And for the painting, is it only acrylic? Thanks again for these 2 videos.

@AndrewLong 2 жыл бұрын

Thank you very much! For the glue I use a variety including liquid nails, great stuff spray foam, and hot glue (the liquid nails holds very well and the spray foam does as well but it expands so be careful with that). The paint I use is exterior water based latex paint (basically normal house paint). If you want to improve the durability of your columns as well it is great to hard coat them, I used flex bond mortar for these columns. Good luck building!

@pitnatclem 2 жыл бұрын

@@AndrewLong Thank you for your reply. I will follow your advice. I really liked your video for painting the tombstones. Hoping to see more videos, I wish you a Happy Halloween.

@AndrewLong 2 жыл бұрын

@@pitnatclem hope to post very soon! Happy Halloween!

@pitnatclem 2 жыл бұрын

@@AndrewLong Hello I really don't know what to take to cover my columns. I took the coating of facade the grain is too big, it does not hold and it does not cover well. Do I need to use tile adhesive? In white or in gray? The Flexbond you use is not found in France.

@AndrewLong 2 жыл бұрын

@@pitnatclemI have never used tile adhesive but I believe it could work. It should not matter what color you use as you will most likely be painting over it later. There are also some hard coating videos on youtube, Hollywood Haunter has a few!

@Mukundanghri 2 жыл бұрын

What would have been cool is to have bent one of the PVC verticals to make it look like someone escaped from the locked cemetery gates.

@AndrewLong 2 жыл бұрын

Great suggestion! Even though the main gates stayed open, I would’ve have loved to do this somewhere else in the cemetery and have a whole scene where a zombie animatronic or scare actor looked like they broke through!

@hustlerssuniv Жыл бұрын

How did you put in the blocks into the columns that holds the gates ?

@AndrewLong Жыл бұрын

I have bracing on the inside (I believe a 2x4) and I attached it with screws through the inside of the column.

@nkelly226 9 ай бұрын

Where did you get your lights from that you are using here

@AndrewLong 9 ай бұрын

The same ones are here from Walmart: www.walmart.com/ip/Thsue-Post-Pole-Light-Outdoor-Garden-Patio-Driveway-Yard-Lantern-Lamp-Fixture-Black/1359120505?wmlspartner=wlpa&selectedSellerId=101209508&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-1651068664266:pla-295289030566&wl5=9011699&wl6=&wl7=9051871&wl8=&wl9=pla&wl10=653544659&wl11=online&wl12=1359120505_101209508&veh=sem&gbraid=0AAAAADmfBIqPLz4OszZGYyV1dzalfuxuP&gclid=CjwKCAjwgZCoBhBnEiwAz35RwqJeC49tyYeHEyEUJZiOiui5Mlsvm_1d0XhJyamGetASTEpARAyMVhoCF3kQAvD_BwE

@SCPVIDEOPRODUCTION 9 ай бұрын

These columns and fencing is not easy. Very time consuming and was not cheap for me to make. Just wondering how long it took you and how much do you think it cost? I’m not even 1/2 way done and I’ve spent well over $1000.

@AndrewLong 9 ай бұрын

Oh no I’m sorry about that! It took me over 2 months to build the whole set of columns. I don’t remember the exact cost but I know that foam prices have gone up quite a lot which could be a culprit.

@SCPVIDEOPRODUCTION 9 ай бұрын

@@AndrewLong Everything has gone up in price. I started in August and questioning my commitment to this project. Lol. When I watched your videos it looks so simple. Far from a simple project. Now I understand why this prop would cost so much.

@AndrewLong 9 ай бұрын

@@SCPVIDEOPRODUCTION these projects can definitely become complicated! I wish you luck with finishing it! Let me know if you have any questions or need any further help.

@iamthenra1968 6 ай бұрын

Why did you use Luan plywood? Is there a specific reason for it? I'm finding it hard to get here in Minnesota... could I use 1/4 inch OSB or just normal plywood?

@AndrewLong 6 ай бұрын

Lauan plywood was the cheapest and best quality thin plywood I could find. OSB and normal plywood should also work just fine!

@iamthenra1968 6 ай бұрын

@@AndrewLong Thank you! Was that latex based paints, you were adding water, so I am assuming water based...???

@AndrewLong 6 ай бұрын

@@iamthenra1968 all water based paints!

@iamthenra1968 Ай бұрын

@@AndrewLong at 9:45 you are talking about the "foam molding pieces" or the " T " shaped decorative molding, what are the dimension of the horizontal and vertical pieces? I am going to be doing the columns this year, and maybe next year I will do the wall and end columns like yours... I absolutely love your work this design is amazing. I have to ask, was the crooked gate on purpose? making it look run down and old? Every time I see it my OCD kicks in and it drives me crazy that it isn't square... lol I do the same thing with paintings on the wall if it isn't straight it drives me crazy .... lol

@AndrewLong Ай бұрын

@@iamthenra1968 I’m sorry I don’t remember the exact dimensions but I believe the horizontal is 3” wide and the vertical is 4” wide. I’m sure the proportions are similar to that. The 2x2 for the gate was quite warped so it just made the whole thing crooked which was a happy accident lol. Good luck making your columns and thank you so much for the support! If you have any other questions lmk.

@GenaralZod 2 жыл бұрын

How heavy are the columns?

@AndrewLong 2 жыл бұрын

When the columns are taken apart, each section can be moved by one person. All together I am not sure how heavy they are, but they are heavy enough that you cannot easily move them but they can stay standing with their own weight.

@tp_mcvey9879 3 жыл бұрын

Do you sell your own columns? I would definitely purchase these!! Let me know if you do and we can arrange deliveries.

@AndrewLong 3 жыл бұрын

Hello! I do not sell these specific columns in the video but if you are really interested in purchasing them I could possibly build them over the summer, but it depends on the other builds and overall time I have. Are you only interested in the main two columns and gates? Also, do you know how the shipping would work with such large items, I have never shipped something this big. Feel free to email me to discuss this even further. Glad you like these columns! My email is: andrew.tw.long@gmail.com

@tp_mcvey9879 3 жыл бұрын

@@AndrewLong Hi Andrew! Thanks for your reply. Yes I’m only interested in the main two columns and gates as we already have our own fencing. I’m not too sure on the shipping as I am from the UK but I’m sure we can work something out. I’ll contact you via email for more details regarding the price of columns / gates / delivery! Thanks man

@dirkdiggler7814 3 жыл бұрын

Wait, wouldn't the last pvc piece be 6'12?

@AndrewLong 3 жыл бұрын

Technically yes, but that would just be 7' anyways.

@dirkdiggler7814 3 жыл бұрын

@@AndrewLong I'm messing with you man but great video you're very talented.

@AndrewLong 3 жыл бұрын

@@dirkdiggler7814 hahaha ok I couldn’t entirely tell I didn’t want to be rude lol

@brettbarnard2563 10 ай бұрын

Nice! Too bad I couldn’t hear a single word because of the music. But great job.

@AndrewLong 10 ай бұрын

Haha sorry this was my first time editing music into a video

@vendright Жыл бұрын

Listen Andrew. Is that Disney calling?

@AndrewLong Жыл бұрын

Hahaha hopefully some day!

@CarrieLiketheM0vie 2 жыл бұрын

These are great! I have one note: your music is so loud and it makes it difficult to hear what you’re saying. I probably wouldn’t watch it again as a tutorial because of the music. I personally wouldn’t be able to concentrate.

@AndrewLong 2 жыл бұрын

Thanks! This was the first time I added music to videos so I'm sorry about that! I wish I could adjust the levels now. My newer videos should be better!

@CarrieLiketheM0vie 2 жыл бұрын

@@AndrewLong Thanks for responding. It looks like you have some great ideas!

@4clover279 10 ай бұрын

😂 You should show your cuts because I call BS to you building this

@AndrewLong 10 ай бұрын

Hahaha I promise!

@Raynestorm1968 11 ай бұрын

Great build......but I thought this was going to be a tutorial.....not a "hey look at me and what I got" bragging style video..... So disappointing. I won't be subscribing

@AndrewLong 11 ай бұрын

Bruh. Give me time stamps of me bragging and I will remove them just for you ☺️

@Raynestorm1968 11 ай бұрын

@@AndrewLong tell you what. Give ME some time stamps of you giving a materials list, or you explaining/demonstrating how to make what you are filming, or you building the piece in front of the camera to "show" how to do it, or supplying complete dimensions of the build which is what a tutorial means, and I will take down my comment. And I wasn't asking for you to take down the video, but perhaps taking the word "tutorial" out of the title might make it less like click bait.

@AndrewLong 11 ай бұрын

@@Raynestorm1968 sorry I couldn’t please you

@seanamos9441 9 ай бұрын

@@Raynestorm1968 lol oh dude. Do you need someone to print every single step out for you? This is one of the best videos out there. I managed to build both columns and gates without step by step instructions. Maybe this isn't the hobby for you, maybe you could just go buy what you want...might be easier on your ego

@Raynestorm1968 9 ай бұрын

@@seanamos9441 I give credit where credit is due. And no credit is due here. Everyone is entitled to their own opinion. And by the way...the video is called "how to build"....so it by right should be intended for people who do not know how to do it.... People who already have the general skills, and knowledge, probably wouldn't need to watch tutorials in the first place.