How To Build In The Tower 200 (Detailed Step By Step Build Guide) by Thermaltake

Рет қаралды 43,328

Күн бұрын

If you're looking at your Tower 200 case and wondering where to even start, we got you! Welcome to the fourth episode of our How to Build in Series, where this time, we're going to give you some tips and tricks for how to build a gorgeous system inside the Tower 200. So, whether you're on the fence about grabbing one and are doing some research, or are looking at your Tower 200 sitting infront of you all ready to build along with us, we hope this guide helps!
Check out the Tower 200 here 👉 bit.ly/469zWc2
Handy Dandy Time Stamps:
0:00 - 0:19 - Intro
0:19 - 1:11 -Taking off the panels
1:11 - 1:38 - Ready your motherboard
1:38 - 1:55 - Side note: Storage drives
1:55- 2:19 - Screw in your motherboard
2:19 - 3:26 - Installing an AIO
3:26 - 4:36 - Cable Managing Pt 1
4:36 - 5:11 - Front I/O Connectors
5:11 - 5:41 - Optional LCD Panel Installation
5:41 - 6:44 - PSU Installation
6:44 - 7:11 - GPU Installation
7:11 - 7:26 - Cable Managing Pt 2
7:26 - 7:52 - Attaching the back fan
7:52 - 8:42 - Putting panels back on
8:42 - 9:11 - You did it!
\\\\\\\\\\\ Can't get enough of us? (It's OK, we understand, we're pretty great 😎) ///////////
Hit us up on Instagram 👉 bit.ly/3RDVXJc
Drop a like on Facebook: 👉 bit.ly/3x2iS7o
Visit our TikTok 👉 bit.ly/3YweBoH
Or see some hot takes on Twitter 👉 bit.ly/3K309R9
Looking for some tech help, giveaways or just want to be a part of the community?
👾 You can join our Discord server 👉 / discord
If you're just after some more info though
Website 👉 bit.ly/3JLDxUN

Пікірлер: 100

@bobruff7049 9 ай бұрын

Tip for anyone buying this case. If you don't have a PSU, consider getting an SFX. It does take a standard, but I went with an sfx and it leaves more than enough room to hide your cables, extensions etc without interfering with airflow

@ThermaltakeAustralia 9 ай бұрын

This is a solid tip! Thanks for sharing!

@benjaminro341 9 ай бұрын

Does a sfx L psu offer the same thing? Or just sfx?

@X831HUSTLER 7 ай бұрын

What sfx PSU did you get? Did you have any issues with the length of the wires on an sfx PSU?

@bobruff7049 7 ай бұрын

@@X831HUSTLER i went with the cooler master v850 sfx. I used cable extensions for aesthetics purposes, but I'm guessing there wouldn't have been any issues. It is more compact than a mid tower

@chrisakadaglitchy2057 4 ай бұрын

A ATX is also fine but it would be ideal for sfx

@phobos2k2 5 ай бұрын

Building right now, (Dec. 12th, 2023). The NZXT | KRAKEN Elite 240 RGB will not fit with an MSI MPG B650I Edge WiFi Gaming Mini ITX Motherboard with AM5 cpu due to the fans not clearing the massive KRAKEN pump. I solved the issue by drilling a few screw holes into the Tower 200 radiator bracket so that the radiator can mount closer to the glass front of the case. Not ideal, but it works. I'll post any other issues I run into... I'm still enjoying the build so far. I posted a short of the completed build.

@user-jg8bu4dn4w 9 ай бұрын

I love a case that gives you fun to build. Thanks TT.

@gpbbrandon 3 ай бұрын

These instructions were a huge help, thank you. I really like this case

@stevearny686 8 ай бұрын

another great presentation from Sarah and Thermaltake team ..

@PJownsyoursoul 8 ай бұрын

Just bought this case. This video was very helpful, thank you!

@ThermaltakeAustralia 8 ай бұрын

So glad to hear! Hope you love the case as much as we do!

@daunted2322 9 ай бұрын

I got last month, Thermalright Frozen Magic 280 SCENIC V2, very good value it was! I loved the little gold accents on the white version.

@gantic8153 3 ай бұрын

Really nice looking case. Choosing between this and the NR200P, great to see good options. Love the green variant

@sensenpratama 4 күн бұрын

this case fit perfectly with B550M Steel Legend and 3 slot rx 6800xt

@jonnscott4858 9 ай бұрын

I'd like to see your take on the Core P cases that can sit horizontal or vertically with a soft hose Custom Loop. How to make sure the Reservoir works in both positions. I'm building a test bench which is moved alot.

@dimforest 6 ай бұрын

How many case fans can this support? That's the issue I'm running into right now - trying to figure out which panels can hold fans and which sizes. It appears the back panel and top panel each come with a stock 140mm fan but I'd like to incorporate another for intake somewhere if possible. Otherwise, stock setup with an AIO would have 2 AIO fans for intake (pulling across the radiator), then two 140mm fans (top and back panels) for exhaust. Unless I'm missing something? Is there room on the bottom panel for another fan? 120mm or 140mm, if yes?

@daunted2322 9 ай бұрын

How did you know I was on the fence :O

@atip114 5 ай бұрын

Hello I'm a newbie in this field. May i know how to make the TH240 set in intake configuration if using default fans in the box?

@MrMearqvist 6 ай бұрын

Curious if a asus tuff 4080 can even fit in the case. Thinking of shrinking my build.

@fairycat 9 ай бұрын

Nice brand

@nathanmadox3364 6 ай бұрын

Great video and VO!

@Duo26 9 ай бұрын

When is the Racing Green going to be for sale in the USA?

@COYOT3_7 3 ай бұрын

Do the Thermaltake AIOs come with those switchable fans?

@Frenk33 8 ай бұрын

How is the IO of the motherboard and the ports of the GPU accessed? The roof of the case looks like it closes everything off

@marks9233 2 ай бұрын

Good vid! A nice lady's voice is always more pleasant. The AIO should be rotated though so the hoses are at the bottom of the radiator, so any air in the AIO system doesn't collect at the hose/radiator connection. (There can be up to 10% air within an AIO). Top mount radiator is probably best, cuz heat and air go up, but you do you. Thanks!

@Altair0329 8 ай бұрын

Gpu temp is okay? I’m using tower 100 case and 6900xt tuf but gpu temp goes up to 105 degree when playing games.

@_lnt 3 ай бұрын

the fact that it still works with micro atx is good since am5 ddr5 mini itx mobo are expensive/ can't find them

@keebtoys5355 5 ай бұрын

I am using ROG STRIX B460-I GAMING and I'm upgrading my case to this Tower 200, now I'm not sure where I should connect the USB type C from front panel or if I will be able to use it or not.

@ryannewby6560 2 ай бұрын

will the case support corsair vengeance pro rgb ddr5 ram 6000 mhz cause thermal takes tough ram is to much for what you get with the thermal take aio tough cooler

@iYamylol 13 күн бұрын

It's only for mini ATX or micro ATX too?

@ZERO.12- 3 ай бұрын

I can fit in it a ak620 dissipator?

@mikemouse40 8 ай бұрын

I use a Micro Atx and SFX in this , switch from Core 21

@toftlol 7 ай бұрын

Which AIO is used in this build?

@jarrencampbell2336 9 ай бұрын

I am in love with this case. Is it small enough to be a home theater/ couch gaming pc? It is itx but looks kinda big

@bobruff7049 9 ай бұрын

It's quite big for an itx, and it's actually matx compatable. But it's an awesome case

@ThermaltakeAustralia 9 ай бұрын

In terms of surface space it takes up, it's certainly on the smaller side. But the 200 is a bit longer vertically. The Tower 100 might be slightly better for this, depending on what kind of hardware you want to run of course.

@christiandk09 8 ай бұрын

Im probably gonna get this case for my new build, but i wanna know do i access the motherboard IO? It doesnt look like there is an access point

@ThermaltakeAustralia 8 ай бұрын

hey! you can access it by opening up the top of the case. If you want a more detailed demonstration; comment on one of our tower 200 videos over on our TikTok account and we'd happily reply with a video :)

@FixitAgain69 2 ай бұрын

Ummmm hey guys I am building in this case right now and I just realized that my cpu water block hits my AIO this seams like a hard problem to avoid if I want a 280mm AIO. Any suggestions? Is there a reason even you used a 240mm AIO instead of the 280mm that the case allegedly supports?

@sikilpindang 5 күн бұрын

what graphic card that you used? is that gigabyte rtx 4060 aero?

@Gates-Tech 9 ай бұрын

Thanks for the video. Reallh like this case. Will a 7900xt red devil fith with a matx board ? The gpu is a 3,5 slot card.😮

@ThermaltakeAustralia 9 ай бұрын

So from having a bit of a look online we do believe it should fit. Will be a bit snug, but we ran an ASUS TUF 4090 in there no worries and that is just a little bit bigger, so should be fine.

@WildCAtFromLT 9 ай бұрын

@@ThermaltakeAustralia Hi, follow up question :) Will 7900 XTX nitro+ fit in this case? 3.5 slot 320(L)X 135.75(W)X 71.6 (H)mm. Having a lot of trouble finding a small case that will fit such gpu... It's shorter that all other non-reference cards, but it's on the chonkier side Thanks!

@battlepowered 9 ай бұрын

Can you put the radiator/fan mount on the left? Would be nice for better gpu cooling.

@ThermaltakeAustralia 8 ай бұрын

No, the case itself is designed to support the GPU on the left.

@salihakn. 6 күн бұрын

what about a bigger motherboard ı don t know if it fits with no problem ıll buy this case .

@jingpinhuicai 6 ай бұрын

So is there a case fan?

@Kamakazi1122 9 ай бұрын

Will any other colours apart from black and white be available in Australia?

@ThermaltakeAustralia 8 ай бұрын

They sure will! We'll be getting the racing green, turquoise, and macha green real soon!

@TheJeffWay 8 ай бұрын

Will racing green be restocked in the US?

@benjaminro341 9 ай бұрын

What psu size does this case support regular or sfx/sfx-L?

@andyk9902 8 ай бұрын

Up to ATX

@romangregor4552 Ай бұрын

bad idea too mount the aio with the tubes over the cpu block if you are unlucky the pump can draw air overtime into the block and the temp goes higher or the pump is burbleing the case looks nice but i cant use it, it kills my gpu cooling :D so much air for cable management

@elitelight233 7 ай бұрын

What do you do about the gpu anti sag bracket? The big L shaped one

@phobos2k2 5 ай бұрын

You put it back in the GPU box and forget about it. This is a vertical GPU mount case. It will not sag the same as a horizontal mount. Plus this case has built in stabilization for the card.

@Frenk33 8 ай бұрын

Won't the cooling be very poor in this PC because of negative air flow? There's only 1 fan for intake (behind the case) and 3 fans for exhaust (1 on the top of the case and 2 on the side mounted radiator radiator) so there's negative pressure. How is this solved?

@ThermaltakeAustralia 8 ай бұрын

Hey Frank! So, we actually have the 2 fans on the radiator set to intake, due to using our SWAFAN EX swappable fans. This is to take advantage of the chimney effect airflow that all our Tower cases utilise, pulling in air from the sides and bottom, and exhausting it out the top. Thanks for watching!

@elitelight233 7 ай бұрын

My 4090 won’t fully seat using this case what am I doing wrong

@patrickcatain3035 7 ай бұрын

Anyone knows how/where the keyboard, mouse, hdmi cables go in?

@swaptimeusa 4 ай бұрын

The back top panel has two holes

@thegamepadguru6723 9 ай бұрын

Question. How does putting a slightly larger MATX motherboard decrease air cooling benefits where this case is perforated everywhere? That statement makes no sense. That said, I have this case and yes, I have a MATX motherboard installed. There IS a cable routing hole if a MATX board is used. A grommit there would be nice though. You may however, have to remove the GPU support bracket like I did. Since i don't plan on moving the PC from place to place, this is a minor concern. Nitpicks aside, This case is well built. The ability to take the side and top panels off without a screwdriver is amazing. Airflow is simply outstanding and including two140mm high quality fans is a great addition.

@julianrodrighugez5432 9 ай бұрын

Is there anyother problems you ran into with installing a MATX motherboard? I am currenlty conficted on which motherboard size to purchase and cant find much info about a Tower 200 MATX build

@thegamepadguru6723 9 ай бұрын

@@julianrodrighugez5432 If you're planning to buy this case, if you haven't bought a motherboard yet, I suggest to get a Mini-ITX board. I already had a MicroATX board so I was willing to take a risk with this case.

@kennyjansen7553 9 ай бұрын

@@julianrodrighugez5432 I'm using M-ATX Asrock B450M-HDV and had no problem at all using this case, the only problem is coming from my sata 3 cable (the one with L shaped connection) isn't a good option because of the HDD mount position. But other than that, it's a good case for both ITX and M-ATX motherboard.

@bobruff7049 9 ай бұрын

@@julianrodrighugez5432 my matx board is an Msi B650m, and the plug for the front I/O is directly underneath the GPU. Luckily it still fits, but it was a tight squeeze

@mmartins0092 9 ай бұрын

The GPU had a different power cable, is the normal cable to short? is it cable extensions, or custom cable?

@ThermaltakeAustralia 9 ай бұрын

That would be one of our cable extensions. Just felt it suited the colour scheme a bit better and we had it handy 😊

@gr4j0m3r 3 ай бұрын

I prefer the T300.

@ignignxkt Ай бұрын

If anyone is getting Arctics newest 240mm aio (iii model) it’s giant cpu cooler won’t clear the radiator fans in this tower which was very disappointing. Going to get this TT one which I’d rather not have bought tbh.

@Runningmanuk420 9 ай бұрын

Whens the lcd panel being released

@ThermaltakeAustralia 9 ай бұрын

That will depend on your region, but here in Aus they are available now!

@truittrarick8514 9 ай бұрын

What about US? I love my tower 200 but would like to be able to buy the LCD kit for it@@ThermaltakeAustralia

@pedrorojas9446 9 ай бұрын

That was a normal psu or a n SFX PSU?

@ThermaltakeAustralia 9 ай бұрын

We just used a standard sized PSU for this build

@justatim8143 5 ай бұрын

I like everything you did except for the AIO, should it not have been put in tubes down so the water pump don't starve for water and have early death.

@aswordinthestonemedia 9 ай бұрын

how do i get that cpu cooler

@ThermaltakeAustralia 9 ай бұрын

That is our TH 240 Snow AIO. Should be available wherever stocks our stuff :)

@yinzer 9 ай бұрын

Can't have fan at top with a 280mm AIO?

@ThermaltakeAustralia 9 ай бұрын

You can have up to a 140mm fan at the top, but if you're also running a 280mm AIO, you just need to mount it on the outer side of the bracket. Does take a bit of messing around, but you can make it work. Hope that helps!

@danyorfagundo5703 6 ай бұрын

The fan on the top it won't fit with the 280mm radiator. But you can install the fan on the other side of the mounting holes. Don't know about low profile fans.

@Max1996YT 4 ай бұрын

The video leaves out how one would connect and route a display cable from the GPU to the monitor.

@anub100official7 7 ай бұрын

It doesnt make sense. Why would intake hot air from heatsink? Does it actually work? 4090 with hot air blown into it?

@harryape9059 4 ай бұрын

The minute I saw the Turquoise version of this case, I made my mind up to get it. My only problem is how can I purchase color matching case fans? I'm in the US btw.

@jingpinhuicai 6 ай бұрын

Can you fit an RTX 4090 in this case?

@phobos2k2 6 ай бұрын

Yes.

@user-bw8lo4ki2b 4 ай бұрын

Does the items for the pc comes with it

@redstar4333 9 ай бұрын

Have the 100 and 500 will say these are well built. 2-bad can not post photos you would understand

@ThermaltakeAustralia 9 ай бұрын

Definitely feel free to tag us on social media if you post some images there! Would love to see!

@redstar4333 9 ай бұрын

@@ThermaltakeAustralia oh no I dont share my private property online. Not 1 of my SM has the same information. Would like to order another set of 360 rad fan brackets for the Tower500 what is the part number?

@michalwiktorow2188 2 ай бұрын

Wrong AiO orientation 😒

@nelc2399 9 ай бұрын

white turns yellowish after couple of years and also the dirt stained mark.

@JohnApp7 4 ай бұрын

в шерстяном свитере собирает пк каеееф

@NyteStalker89 7 ай бұрын

Thermaltake... why you decided NO MAGNETS for the control box and the archaic MOLEX for the SWAFAN EX is beyond me.. way to stay in the 2010s..

@Azl205 8 ай бұрын

Nicely done. I just got the 200 myself as I am getting ready to upgrade my Plex server. However, I believe you could run into some problems with your AIO. This is a common mistake from AIO and case manufactures. The AIO Pump/Tank should never be mounted on top. For side mounting option, the tubes connections should be down. The Pump and tank should be at the lowest point. That will prevent air from going in the pump. Mounting it the wrong way will cause cavitation noises, (gurgling/Waterfall) performance issues, shortening the AIO pump life or killing it prematurely. kzfaq.info/get/bejne/eMh3otCnlp-Zo58.htmlfeature=shared

@yippykayak5842 7 ай бұрын

As long as the pump is below the top of the radiator (the highest point) it will be fine. There’s several videos out about how people have misinterpreted the advice on AIOs thinking that if the tubes are at the top it’s an issue. It’s only an issue if the pump is higher than the top of the radiator, which it isn’t in this build