How To Build Pyramid Stair With Landing
Рет қаралды 354,676
Күн бұрынThis DIY pyramid stairs with landing build is all about how to build box steps and landing from start to finish. This outdoor stair landing is build with ZERO stringers needed. Bring Your Own Tools (#BYOTools 199).
Plans Available NOW: www.etsy.com/listing/16208937...
Apparel List:
-Georgia Boot (20% off with "BYOT"): bit.ly/395WxO6
-BYOT Shirt: bit.ly/2T6l8dE
Tool List:
-Framing Hammer amzn.to/2XmNErF
-Chop Saw amzn.to/3k5GCCC
-Framing Nailer: amzn.to/3oEb9Mx
-Tape Measure amzn.to/3hrUYeG
-Speed Square amzn.to/2FrIuQK
-6' Level amzn.to/3ANX6Fd
-2' Level amzn.to/2ViD711
-Deck Wise Spacers: amzn.to/3KUOROn
-Drills: amzn.to/45DOnUU
-Circular Saw: amzn.to/45rsTuy
Material List:
-Deck To Wall Spacers: amzn.to/45Nt17c
-Ledgerlok Screws: amzn.to/47MAjdj
-Tuff Blocks: amzn.to/3YWbxng
-Stainless Steel Screws: amzn.to/3PdNkFt
-2"x8" PT Lumber
-2"x6" Cedar Deck Boards
-1"x8" Cedar Paneling
CHAPTERS:
0:00 - Intro
0:40 - How To Build A Landing
5:35 - How To Build Stairs
10:48 - How To Install Cedar Decking
15:45 - Cedar Stair Riser
18:04 - Finished Product
MUSIC from www.endlessnoise.com/ & www.chernebeats.com
@rozanne38 14 күн бұрын
This is by far the best video I have found on KZfaq. This is exactly what I want to do. Thank you!
@user-ot3wg5lq3p 4 күн бұрын
Pretty nice man ! Son and I do a LOT of building so its rare that we would watch someone else lol. Yea man enjoyed.
@omnibcateng1 5 күн бұрын
PATA PATA, MIRIAM MAKEBA! GREAT WORK!
@ranakillough5649 9 ай бұрын
Yes on the detailed drawings! Great job btw.
@BYOTools 9 ай бұрын
Thanks so much for your input and great to hear. I’ll get on it and thanks so much for watching.
@thetmyers3881 8 ай бұрын
beautiful job!
@CL-yp1bs 6 ай бұрын
Beautiful work, well done!
@glenroysmith6682 8 ай бұрын
Great built diffinately loving those 45cuts.
@1962countrygirl 18 күн бұрын
yes on detailed drawings!!!! Looks amazing cant wait to build mine
@govnor 8 ай бұрын
Excellent and well detailed video! Thank you. Your attention to detail is very impressive, keep up the good work.😊
@aerialrescuesolutions3277 Ай бұрын
Excellent. very weel explained. I love the double supports you used.
@catsmeow5566 6 ай бұрын
This is very pretty! Nice techniques as well. Thank you!
@MrHappy629 8 ай бұрын
Beautiful.
@shuster1921 14 күн бұрын
Beautiful!
@macfrankist 6 ай бұрын
Beautiful work!
@Chardonbois 3 ай бұрын
Brilliant job. Thanks for an excellent tutorial!
@MilesVogel 8 ай бұрын
Drawings and steps would be awesome.
@furqes 2 ай бұрын
Looks nice, you made it look easy
@Doitology Ай бұрын
looks really nice. well done!
@samuelligo7234 8 ай бұрын
I didn't realize that those deck-to-wall spacers existed! Cool. Beautiful stairs thanks for sharing.
@shuff1111 Ай бұрын
I use them for all my decks....you really should fill them with caulking though, to seal the lag bolts!
@herefornow9671 9 ай бұрын
Thanks very much Really great video Inspirational!
@pattig717 9 ай бұрын
Nice addition to that beautiful home and patio. Love all the detail in your videos. Very helpful.
@BYOTools 9 ай бұрын
Thanks so much for all your support along the way :)
@juangiraud6013 6 ай бұрын
Looks great!
@curtiscottrell6499 5 ай бұрын
Great display on all counts...
@roselyncampisi822 9 ай бұрын
That's beautiful
@Trendsetta68 2 ай бұрын
Very nice looking ! GOD Bless ! 😇👍🏼
@goldentiger1841 5 ай бұрын
Master Piece !
@kevinzep01 6 ай бұрын
Thanks for sharing! Great video.
@cascajohn66 2 ай бұрын
Great job
@lisaferrara8120 9 ай бұрын
Incredible step-by-step details. Beautifully done.
@BYOTools 9 ай бұрын
Thanks so much Lisa. Truly appreciate the support.
@tdmallet 7 ай бұрын
Pun intended?😅😅
@patriot8767 9 ай бұрын
Great job sir
@kule510 9 ай бұрын
Great video!
@tracysellman1562 Ай бұрын
Love the work you do in your videos, may I make a suggestion? On all the pressure-treated lumber you cut, always treat your cut ends, that end grain is like a sponge and will wick water in fast and rot from the inside out. Something my Dad taught me back in the 70s, yes it takes a bit of time to treat the end grain cuts, but it will make it last a few years more. just a suggestion. :)
@rozanne38 14 күн бұрын
What works best to treat them?
@tracysellman1562 14 күн бұрын
@@rozanne38 Cut-N-Treat Wood Preservative is for cuts, holes, and injuries to pressure-treated wood used in above-ground applications. Or similar product.
@elainenilsson5472 8 ай бұрын
I loved this video. thank you
@petergambino2129 8 ай бұрын
Very nice!
@Mike-sh2cb 9 ай бұрын
Great work matey! Looks brilliant!! All matching well with the existing and surroundings. Thanks for the tool and material list.
@BYOTools 9 ай бұрын
My thoughts exactly and thanks so much for watching Mike. Truly appreciated.
@Mike-sh2cb 9 ай бұрын
@@BYOToolsWe are lucky that you share with us. It is clear and obvious that you are extremely professional and take great pride and attention to the detail of your work. Thanks again, I always learn something new and 95% of the time, multiple things!!! Hope you have a great week!
@danielhanawalt4998 2 ай бұрын
Nice, very nice indeed.
@austinainsworth9141 4 ай бұрын
Those look sick man. Good shit
@raulsoto2088 9 ай бұрын
Hermoso trabajo... Te felicito, gracias por compartir, un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱
@justatim8143 Ай бұрын
I like the rubber pucks you used against the house as that is the same idea that was done to my 120 year old house. My house was built out of all ruff cut lumber and when they doubled all porch boards the put 1/4" lath boards in between for water and air.
@user-jo3oe5cy8n 8 ай бұрын
Yes I would thank you
@compubyte2010 8 ай бұрын
absolutely going to steal this one LOL have french doors going out the back.. about 32" off the ground.. this would be perfect to build. ( minor modifications due to the size I need.. etc. ) great job!!! .. debating on cedar vs redwood ?? as redwood is a bit strong? but.. also a bit more expensive?? decisions...
@kennethmclean3679 9 ай бұрын
Very Nice looking steps. great professional and thorough job. Id hire you.
@christopherjustice8250 9 ай бұрын
Looks great! I would've added some led lights.
@BYOTools 9 ай бұрын
That would have been a nice feature. Maybe in the future. Thanks for watching.
@kylemarley5876 9 ай бұрын
Yes, would love to see plans for this project. I want to do this off my front deck down to the yard. I’m in Seattle, so feel free to swing by and help. Lol!
@BYOTools 9 ай бұрын
How does next Tuesday sound for the build at your place?.... haha jk! Thanks so much for letting me know about the plans Kyle and for all the support.
@jefferysmith8824 5 ай бұрын
I would really like detailed information on this project. I need to build 1 for my RV. Awesome content!
@ARMYROADDOG 9 ай бұрын
nice work
@BYOTools 9 ай бұрын
Thanks so much for watching and all the support.
@GarrickVance 9 ай бұрын
TuffBlocks are great, but it not only voids the warranty but also it’s now of unknown structural integrity by modifying them. Its prob fine for something this small, but def would not do this on a real deck or foundation. It specifically calls this out in the installation manual and spec sheets for anyone looking to do this.
@BYOTools 9 ай бұрын
Thank you so much for bringing this up. Should have said something in the video about that and you are completely correct. Would never do that to a deck footing but I’m not worried about the structucurability on something this small. Still way overkill with three of them plus the block steps are adding a ton of support as well. Thanks for watching and your comment.
@ghentleman9397 6 ай бұрын
Could you have just cut/notched the timber around the footing system and added a few extra horizontal timbers for extra supports? I'm sure it is fine considering how small the steps are. Love the build. Going to do something similar!
@chadmarkley 9 ай бұрын
Your videos are so good!!!!!!
@BYOTools 9 ай бұрын
Thanks so much for all the support Chad.
@oldguysrock2170 8 ай бұрын
I am planning a similar project over a concrete slab. Just wondering if the structure is vented to allow for moisture issues. Water definitely dripping through the deck boards. Mold under the stairs along with debris over future years could expedite wood rot. The TuffBlocks are awesome, just wondering if they create enough clearance to allow water and air to pass under the stairs. I like how you cut off the TuffBlock flush (I read the warrantee comment in a previous posting, but I would do the same)! Great work, very strong and sturdy!
@user-zf4qs2jy3n Ай бұрын
That LB and dryer vent are obstructed.
@markmahurin8891 7 ай бұрын
Great work! Looks great! I do have a question: Where did you find lumber so straight? Let me in on the secret!!
@FernandoSilva-ng9ts 8 ай бұрын
Nice
@First-Adhesive-Technologies 7 ай бұрын
Thank you for the Video Instruction. Why there was no Joist Butyl Tape applies to the joist and blocking to prolong the frame?
@amoh3877 9 ай бұрын
Great and informative video , just wondering how come you didn't miter cut the landing decking boards? Thanks
@joshuawood6644 8 ай бұрын
Thank you for this video! You did a solid job here!! I would like to build this for my wood shop. I was wondering, do you think this would work free standing? I just finished installing fiber cement siding on my shop, and it would be a lot of work to remove it and install a ledger board (at least for me, as I'm not a professional by any means). Do you think it would work to replace the ledger board with more posts?
@harrisond8132 9 ай бұрын
Nice job. Would love to do something like this. Mine is about the same height. Question for you or anyone else... do I need railings at this height? I can't seem to find code. I thought it was anything over 21" to landing.
@Iam_jardow 8 ай бұрын
Only extra step I could think of is some type of vapor barrier between the decking sitting on the walkway. I know it’s PT but it would help
@gorgeousdzastr 7 ай бұрын
Great craftsmanship. However I have a question about the electrical wiring behind the stairs specifically on the left hand side. Seems the wires were just falling behind and in between the spacers. I hope everything worked out. Looks truly amazing. Nice and clean. What's the value of this alone?
@kingalphadogg 8 ай бұрын
Great carpentry!
@berpherdsavage 2 ай бұрын
An electric pull box was half buried behind the left steps. There appears to be what looks like the bottom of a drier vent is buried behind the second step on the right side. If it is a drier vent there will be an accumulation of lint that will be difficult to remove. I was surprised that there wasn't any kind of flashing from the sill to the top of the water proofing behind the pyramid landing. One of your earlier videos showed you applying wood preservative from an old container. I wondered if that old container was put back on the shelf, only to be removed if you made another deck video. Evidently you don't consider this a deck and so applying preservative would be unnecessary.
@tayred81 9 ай бұрын
Nice floorboards you got in the u.s. I personally like to glue my 45° angels with pu glue. The pressure treated material seems to suck, or is it any good? Nice job 💙
@driveman6490 9 ай бұрын
Very nice job! Just curious why you didn't treat the exposed framing on the bottom box (or any of the end cuts) when you ripped your material.
@alangill6712 2 ай бұрын
He said at the end of the video that this deck will be covered so will not really be exposed to moisture so he didn’t do tape etc.
@Mr123bman456 9 ай бұрын
Structureability???
@ronw8628 9 ай бұрын
thanks for the flyover, flyby at the end of the video. More diyer's should do that. If can, exploded plans would extra bonus. The measurements aren't important since the overall dimensionso of every landing isn't the same. Oh, is the top landing dimensions limited by the width of the two steps? I would think the top landing would have been larger.
@wncsnake 5 ай бұрын
What kind of table saw is that? I really like the little helper on the side and the pullout to help with longer cuts
@shuff1111 Ай бұрын
You should fill the hockey pucks with caulking to seal the lags!!!
@mgodbee 9 ай бұрын
I wish we could get that type of pressure treated lumber in Georgia... But I've haven't found any suppliers
@BYOTools 9 ай бұрын
Good old PT lumber here in the PNW is for REAL haha. Thanks for watching.
@williamsethman2434 9 ай бұрын
Yes, would like to get a copy of the BOM, or a drawing. Thanks 😊
@trinitywave 2 ай бұрын
Beautiful stairs. What was the purpose of the spacers? To cover area or Alignment ? Also how would the extra inch change the angle of cut by 1 or 2 degrees? If this is a complex answet could u refer me to a seperate video or search term? Thank u for the video. Love and light.
@davidparker2130 8 ай бұрын
Please can we get drawings and details ? Great video !
@foxgdsmck 15 сағат бұрын
I have a general question which is how do you know what direction your actual deck boards need to go? Such as a flat entry/ exit from the deck to the house, no stairs. I'm unsure of i should run the deck boards parallel or perpendicular to the entry/ door?
@MichaelCook-bw4mr 6 ай бұрын
We're still interested in buying these great shoes ❤
@fenway555 2 ай бұрын
Great video. How tall are the stairs from ground to top of landing, total rise?
@mariaserrano8801 2 ай бұрын
Yes, please provide detail project drawings. I have a project I can use this style of step system.😊
@almg4884 6 ай бұрын
You are one hell of a good tradesman
@certifiedfker 9 ай бұрын
Thank you for a wonderful video! I’m the process of building the steps on my new walk off porch to a lower deck and would love you drawing and plan for the pyramid steps. Thank you I’m advance! Great video.
@rosegold7975 9 ай бұрын
Great job. I think you should make a video where you clean up all the wiring, hose, conduit on the outside of that house. Looks trashy
@mattrhoat 4 ай бұрын
Really enjoy the process and the outcome of projects like this, but why didn't you put some cut seal on your PT edges after cutting and ripping down? moisture is inevitable, fresh cuts in PT material you want to seal back up so it will last
@madman432000 2 ай бұрын
You covered the dryer vent?
@yeowzaa007 Ай бұрын
No weatherproofing membrane or flashing behind that ledger?
@isaacaal 4 ай бұрын
those tuff blocks look super handy where can you get those?
@mattyhendo88 4 ай бұрын
Seen them at lowes if that helps man!
@bbcake001 6 ай бұрын
You covered all the wiring there!!!
@timtant 5 күн бұрын
Apologies if the followinmg was asked already: The Cedar Decking, you used Stainless-Steel screws to secure the lengths to the framing; if the Framing were Pressure-Treated wood structures, would the Pressure Treatment (the injected acidic materials that made those boards Pressure Treated) tend to corrode the 'pointy ends' of those screws? I have found that unless I use Galvanized Steel (electro or otherwise) screws, then my screws always end up discoloring the wood where they touch, as well as tend toward failure within a year's timeframe. AM I mistaken? Or is there another solution?
@kman4223 9 ай бұрын
Excellent job!! Question about cedar decking - do you need to space decking during installation? I've heard some say that the boards will shrink over time as they are typically pretty wet when sold? I did a similar project and let the boards dry for a week and then spaced as you did.
@jaredyandell1220 8 ай бұрын
Let boards dry first cedar shrinks a lot I’m a professional builder on decks
@robertdoane5875 7 ай бұрын
Shouldn't you have 1" a finished overhang on your treads.?
@rsproductions3820 8 ай бұрын
wont you have huge gaps in that decking now after the sun gets too it over time ?
@xAoDxNoiseComplaint Ай бұрын
Cute deck, but, the electrician that has to get into the box you blocked is going to hate your deck. Oh, and that dryer vent blowing on all your nice wood is going to do wonders to the deck.
@zephyr1408 9 ай бұрын
Hey I am a finish carpenter and yes I would really like a set of those plans available to buy ! Usually I find a few things not appealing when not done by a pro ? But either you are just being nice by claiming your not a pro but really R or else you hv serious talent & need to quit your day job! In any even let’s get those plans out!!!
@BYOTools 9 ай бұрын
I take great pride in the videos I produce and love hearing comments from professionals like your. I have many years of construction experience and even went to school for construction management. However, never went through an apprenticeship. I like to call myself a Pro DIYer because I have too much respect for true trademan like yourself. I know the countless hours of hard work people like yourself put in to become true pros. I'm a jack of all trades but a master of none. Thanks so much for the kind words and all the support.
@zephyr1408 9 ай бұрын
@@BYOTools my dad is a retired General Contractor who build a lot of customs including the one I am in now! So I did a say from 10 to 18 yrs old apprenticeship ? Left it and was an officer many years but always had a hand in it ! When I quit my day job I became a furniture builder then went into finish and in my state if you work for yourself you must hv a Contractors license which requires a 3 yr apprenticeship which I had that! So long & short answer there! Now I build cabinets , doors, set doors, trim, crown, basically all that. 6 days week I am usually booked out about a yr? But who is to say when & if the Good Lord extends or halts that? That is above my pay grade ! Hv a great one looking forward to some plans on that! I think I can make a Buck or two on that work!!!
@romuloechevarria2310 2 ай бұрын
I need a set
@ur.boy_kevinnn 9 ай бұрын
i was ondering what you were gonna do about that!
@BYOTools 9 ай бұрын
Thanks so much for staying tuned Kevin.
@ur.boy_kevinnn 9 ай бұрын
@@BYOTools yea
@diverzzo68 3 ай бұрын
😮great craftsmanship 🎉🎉😮..hat's off to you sir😊
@scottbeattie7394 7 ай бұрын
Framing sitting on the slabs no damp proof course
@konakaffe 8 ай бұрын
Miter steps can easily turn into a trip hazard through time.
@Woodworkingcreative 7 ай бұрын
❤❤❤😅nice
@wildtwindad 9 ай бұрын
#BEERSTAIRSFTW!!!
@pietervanhooft5692 9 ай бұрын
You have to take a few millimeters to the stones. Than you have more airflow and te wood will last longer
@humbolt45 5 күн бұрын
No hand rail required for 3 risers?
@sickbale 9 ай бұрын
The pencil ahahahahah
@BYOTools 9 ай бұрын
LoL! So glad someone caught it haha!
@14mattomatto 7 ай бұрын
where do the handrails go?
@Yorkie285 4 ай бұрын
You forgot to glue the 45's over the stairs
@crossbow3539 Ай бұрын
Very nice work but I’ll bet you’ll be sorry you didn’t make the landing larger doesn’t seem like much area to stand on when you open the door. Just my opinion
Designs by Donnie Woodworking
Рет қаралды 644 М.
MOONCAKE FACTORY
Рет қаралды 25 МЛН
KOUCHER
Рет қаралды 8 МЛН
Eric Blows Glass
Рет қаралды 45 МЛН