How To Change 1993-2011 Ford Ranger Rear Axle Assembly

Рет қаралды 31,076

3 жыл бұрын

This video will show you how to change or swap the rear axle assembly in a 2013-2011 Ford Ranger pickup truck.
#fordranger #axle #fordrangertruck
Affiliate links
Shop our Amazon Store: amzn.to/3cgdxPh
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.

Пікірлер: 43

@HomeOwnerRepair 3 жыл бұрын

Shop for auto parts (affiliate link): amzn.to/38WrOQ0

@johncox3070 3 жыл бұрын

In the middle of removing my own, and this video was more informative than the manuals I have been looking at. The separation of the housing and leaf springs would have been nice to see! Thanks for the video , even though!

@brandona4618 2 жыл бұрын

I was hoping theyd used a 15 or newer axle. I was looking for a pre solved solution to the 12v/5v system for the E locker on a 15 in swapping into my 07

@HomeOwnerRepair Жыл бұрын

Thanks for watching

@zachsheffee8458 2 жыл бұрын

It’s hard to find professional mechanics like this in the south.

@raytycker1656 Жыл бұрын

You got that right. Nothing but crooks in North East Alabama.

@HomeOwnerRepair Жыл бұрын

Thanks for watching

@MUSTANG408W 3 жыл бұрын

At 0:53 the "excessive play" in the axle shaft........that is normal. The shafts are held in the housing with C-clips. Normal for every 7.5 and 8.8 regardless if open differential or trac-lock.

@HomeOwnerRepair Жыл бұрын

Thanks for watching

@wisconsinfarmer4742 6 ай бұрын

thank you. I found this helpful. . Failure rate on the L (limited slip) seems to be higher than on the open diff.

@HomeOwnerRepair 6 ай бұрын

Thanks for watching.

@markashby3264 10 ай бұрын

Great video. It would make good sense for anyone doing a swap like this to take a close look at the axle surfaces where the seals ride for any sign of scoring or wear as well as checking the condition of the splines and pick the best pair. Also a new set of wheel bearings is pretty inexpensive as long as you have the seals out.

@HomeOwnerRepair 10 ай бұрын

Thanks for checking out the video.

@danielvalletta417 Жыл бұрын

Great job on performing the titled task of changing the Rear Axle Assembly. Although not part of the titled task, showing the removal and re-installation of the axles would have been helpful. . . Perhaps another video idea especially for the left rear axle which is not as intuitive to remove for me.

@HomeOwnerRepair Жыл бұрын

Thanks for watching

@glevesque5295 2 жыл бұрын

Just for safety, clean "buff" the 4, 12.mm yoke bolts and put blue 242 Loctite on it.

@HomeOwnerRepair 2 жыл бұрын

Thanks for watching and the added tip!

@dakotamcneely5779 2 жыл бұрын

The one coming out is limited slip (both tires pull) hence the L on the tag. The salvage model is an open diff (one tire pulls). I would have kept the L carrier and swap all gears over. I'm doing mine now on same truck with 410s. Due to bent axle and tube in accident.

@richardjacques1731 Жыл бұрын

Do you know what that canister is above the spare? Does it need any maintenance? I am getting a new rear end for my 2004 Ranger, the new one only has 120,000 miles vs mine at 220. While I have the truck up on stands I want to do everything underneath that I can.

@HomeOwnerRepair Жыл бұрын

I'm not sure. I'll have to take a look next time we work on this truck.

@theplaylisthub4625 2 жыл бұрын

So do you by chance know what cars to source a lsd 8.8 diferencial from that will fit this truck 02 ranger

@joshj1899 Жыл бұрын

Mine was a lil hard to find but get the tag off it and call around to local scrap yards

@HomeOwnerRepair Жыл бұрын

Thanks for watching

@stevecarmichael7000 2 жыл бұрын

Hey, thanks for the video! Just gotta ask....... is the guy's last name Semel, that is doing the filming? I worked with a really nice guy here in Virginia with last name of Semel and y'all could almost pass for twins! Looks, talking, laugh, kind spirit...... everything! He was from N.J. 😁

@HomeOwnerRepair 2 жыл бұрын

No it's not my last name...lol Thanks for checking us out!

@kevinricardo7785 3 жыл бұрын

Juat curious...why the grease on the gasket?

@HomeOwnerRepair 3 жыл бұрын

It helps to hold it in place and as you tighten the differential cover you can see some of the grease ooze out, it helps you to know that all of the bolts have been tightened too.

@zachsheffee8458 2 жыл бұрын

Is it good thing to hang things from the brake line?

@HomeOwnerRepair Жыл бұрын

Absolutely

@joshuasmith2254 3 жыл бұрын

Is this the same truck you replaced the rear seals on a few months ago and now the rear ends blown?

@HomeOwnerRepair 3 жыл бұрын

It sure is. Steve and I are pretty sure my dad got stuck on some ice and rocked the truck back and fourth one too many times..ugh...lol

@zachsheffee8458 2 жыл бұрын

Aren’t you supposed to bolt them each bolt opposite each other?

@HomeOwnerRepair Жыл бұрын

If you follow the video you should be fine

@xxgamingbossxx40 2 жыл бұрын

Will 96 ranger diff fit my 09 ranger

@HomeOwnerRepair Жыл бұрын

Not sure haven't tried it.

@kevinagnew6878 Жыл бұрын

Why did you not show how you put the backer plates on the new axle?????

@HomeOwnerRepair Жыл бұрын

Sorry just saw this

@russelmussle7866 2 жыл бұрын

from Boston lol

@HomeOwnerRepair 2 жыл бұрын

Not too far from there. What gave it away? ...lol

@zachsheffee8458 2 жыл бұрын

Aren’t you supposed to use a torque wrench for that?

@HomeOwnerRepair Жыл бұрын

If you follow the video you should be fine

@zachsheffee8458 2 жыл бұрын

Just a bunch of guys talking about their rear ends.

@HomeOwnerRepair Жыл бұрын

This is correct