How To Change Circular Saw Blades

Рет қаралды 436,225

6 жыл бұрын

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Makita 7-1/4" Circular Saw w/ Case:
amzn.to/3bTcRz3
Diablo 7-1/4" 40-Tooth Circ. Saw Blade:
amzn.to/30dIkq7
Diablo 7-1/4" 24-Tooth Framing Blade:
amzn.to/3c0pbxv
(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
FOLLOW US ON INSTAGRAM:
/ thehonestcarpenter
FOLLOW US ON LINKEDIN:
/ thehonestcarpenter
This video will show you how to change out a typical circular saw blade. You'll also learn how to determine when it is actually time for a circular saw blade change, rather than relying on the saw blade's appearance (which can be misleading).
Tool List:
--Circular saw (mine is a 7-1/4" Makita)
--7-1/4" blade (Diablo)
--13 mm wrench (supplied by manufacturer)
Steps:
1. Unplug the circular saw!
2. Trigger circular saw brake mechanism (by pressing the small tab, usually located near the blade guard and in line with the arbor)
3. Set wrench on arbor bolt
4. Pull counter-clockwise
5. Loosen and remove bolt and washer
6. Remove circular saw blade
7. Insert new circular saw blade, with teeth pointing up at front
8. Reattach washer and bolt with wrench (clockwise)
Always be careful when changing circular saw blades! The carbide teeth on new circular saw blades can be fairly sharp--consider wearing gloves when handling.
In general, you'll know it's about time for a new circular saw blade when you can hear the saw's motor bogging down in cuts. Also, wood will splinter worse than usual as the circular saw blade passes through the material.
Thanks for watching! If you enjoyed this video from The Honest Carpenter, be sure to LIKE AND SUBSCRIBE!
For more carpentry advice, please visit my blog:
www.thehonestcarpenter.com/

Пікірлер: 141

@Angel26xD 3 жыл бұрын

My dad made furnature when I was little and my mom made many things in my house when I was young, but now I just got out of college and want to make my own stuff so I dont have to buy it. My mom has passed and I dont have contact with my dad, so this was so helpful since I was too young to use the saw when I was around them. Thank you!

@HOTRODRICO 2 жыл бұрын

wear eye protection

@mireyarobles9133 Жыл бұрын

Way to go girl!!👍

@hnoyola1520 Жыл бұрын

that's great that you can do that!

@FloodlightGamingReal 10 ай бұрын

Little curious to see if youve done well making your furniture since 2 years ago

@shadowdance4666 7 ай бұрын

Daddy abandonment issues. Watch out for trolls. Oh wait that’s me oops

@SouthrenGirlswithPapa 4 жыл бұрын

Im 69 years old. Husband just passed now i need to learn on My own! Thank you. I duled the blade cutting concrete backer board. Thank u love you all!

@ScrewedupClicksta713 3 жыл бұрын

Wear a mask and be careful cutting that stuff with a wood blade

@eduardocorrochio162 5 жыл бұрын

Before watching your video, I felt like an idiot because I knew there had to be some way to change the blade. Now I can change it and feel safe that I did correctly. Thank you for these easy to follow instructions.

@TheHonestCarpenter 5 жыл бұрын

Eduardo Corrochio You’re welcome, thanks for watching! It was a total mystery to me until I watched somebody do it years back. That’s the way a lot of construction goes 🙂

@consanna 2 жыл бұрын

Thank you. I had “loaned” my saw to my son in law. When it returned the blade was burnt. It had been so long I forgot about the blade lock. KZfaq how to and your video did the trick. Again Thank You!

@MothersLovingArmsNursery Күн бұрын

Great video, another guy titled his video how to change the blade etc but all he showed was how to loosen the screw, he didnt even take the screw or the blade off. Thank you. 🙏

@TheHonestCarpenter Күн бұрын

Thank you! I always try to show the whole process as often as possible 😄

@earnthis1 2 жыл бұрын

Before watching this video I had traveled all around the world asking the most brilliant carpenters and woodworkers how to change a blade. None of them described it as well as this video. My journey around the world continues, and is my days pass I am often reminded of this, how to change a blade video. The sun setting on the horizon, frogs splashing in the fake pond next to the mall where I write this, takes me back to the times I chase the dragon deep into the well.

@CarinaBoje89 2 жыл бұрын

*This is my second DeWalt circular saw **MyBest.Tools** I sold my 18 volt and use the money to help purchase this 20 volt. Money well spend. I liked that it came with a blade as well.*

@michaelduy9055 Жыл бұрын

Spindle locks are great but not included on all tools. Maybe a newer, revised video on saws without spindle locks and how to do a blade change could help a lot of people out!

@poeticblade 2 жыл бұрын

Thanks! My 5 1/2" blade radial saw has less clearance than the 7 1/4" radial saw in your video. I thought I was doing something wrong because I couldn't get the blade to go straight in. After watching your video it became clear that I had the right idea, but some very gentle maneuvering was required to maneuver the blade up and across the bolt housing. After that, it slid into place. Thanks for the video!

@bandyboi3032 3 жыл бұрын

Never had to change a blade on a circular saw before, any time I used one it was always someone else's. Started to do reno's on my house today and I was struggling to figure out why the bolt kept spinning and not loosening. Glad to see it's as simple as a locking mechanism behind the blade! I feel like a doof now. Thanks for the helpful video :)

@u.sonomabeach6528 2 жыл бұрын

The worst for me is changing a table saw blade without a lock

@michelleglashower2058 5 жыл бұрын

Thank you! I just got a Hyper Tough saw & I don't have any real experience with power tools. This helped me change my saw blade. One tip for others: that spindle lock is tough to press down & keep in place while loosening the other side - until you're comfortable with it, best to make changing blades a two person job (esp if you're not a carpenter). The Hyper Tough saw blade likes to be rotated clockwise before loosening, until it catches.

@TheHonestCarpenter 5 жыл бұрын

Thanks Michelle! You’re right, you really have to wedge your hand behind the guard on most circ saw models. It can help to set the saw on something waist-height and brace it with your hip so you can pull back a bit. Just make sure it’s unplugged first 😅 Good luck with the new saw, and be safe!

@FloodlightGamingReal 10 ай бұрын

Im in an apprenticeship and i have to get approval from my teacher to use the circular saw, this was a lifesaver for my circular saw exam Tysm

@TheHonestCarpenter 10 ай бұрын

That’s great to hear! We need more apprentices. Good luck with the training, and work safe! 😄👍

@saliyalokeshwara7055 3 жыл бұрын

I bought my first circular saw brand new and it was time to put the blade in. I couldn't get the bolt to come loose. I thought no was doing it wrong. That's why I came to look at the video. I eventually took it to the shop and they loosen it up for me. Even they were surprised to find how tight it was. Anyways thank you for sharing your knowledge. I just wanted to share this story with you all. Cause I am very fond of wood working and this is my first attempt into woodworking

@neilfrasersmith 3 жыл бұрын

New Makita saws use a reverse bolt. Left to tighten, right to loosen. You were probably trying to continue to tighten.

@Pepuskhan Ай бұрын

You tube is the best thing on earth. I was becoming crazy. Thank you you tube and this man. And God too. I did with my Hercules circle saw.

@ryleekawasugi3610 3 жыл бұрын

I'm a total newbie and this prevented me from wasting an ENTIRE day. Thank you

@mrgoodcrazy2950 Жыл бұрын

Just bought my first saw and was so confused as how to change it. Thank you soooo much. 🤩

@robertmukundi2004 Жыл бұрын

So helpful. I bought my circular cutter a year ago but have never used. Today in the morning I needed to fix a furniture but was stranded on how to insert the blade. From Kenya.

@TheHonestCarpenter Жыл бұрын

I’m glad it helped Robert! Happy to hear from Kenya! 🇰🇪 🙂

@user-em6ie2be7x 3 жыл бұрын

Thanks for The Tutorial, I've been wanting to try a Metal Cutting Blade on my Circular Saw for a long time.

@Prplflwr Жыл бұрын

Life saver!!!!!! Seriously, lots of videos out there but you're the only one that tells you that you'll hear a click...

@angellas.1314 3 жыл бұрын

This is so timely for me. Thank you!

@tyremanguitars Жыл бұрын

thankyou, as a hand tool woodworker this was very useful for me, I need to cut up some MDF sheets.

@RPG__Dave 25 күн бұрын

Thank you it had been many years I and could not remember the tab!

@funnycity6671 3 жыл бұрын

thank you sir,,, you made it simple!! God 🙏 bless you!!

@jammubansal1 3 жыл бұрын

Wonderful video. I was able to follow and change the blade.

@k8sl 4 жыл бұрын

Thank you! (I did not know about that little stop, it makes it so easy)

@TheHonestCarpenter 4 жыл бұрын

@Kayti Sullivan You're welcome! Thanks so much for watching 😀

@webellmira6805 3 жыл бұрын

thank you sir for the tutorial.i learned now how to replace my circular saw blade

@marieflohr7031 6 жыл бұрын

Thank you for your explanations

@TheHonestCarpenter 6 жыл бұрын

You’re welcome, Marie!

@BenParisi 7 ай бұрын

Just what I needed. Thanks dude!

@6Toe 2 ай бұрын

Informative. Thank you

@DougCeleste 2 ай бұрын

Nice video and thanks for sharing! It would have helped if you would have mentioned about what to do with older circular saws (like mine) that do NOT have that locking button to make the blade not spin when trying to change it. (I have to use a piece of lumber touching the old blade teeth so the blade will not spin when I try to remove it and when I install the new blade.)

@anjhunbasiga9667 3 жыл бұрын

thank you so much for the tips just bought a new circular saw and no idea how to change the blade

@NashPotatoesCoffeeShow 3 жыл бұрын

Awesome, thanks for the help bro...

@pestimom6572 11 ай бұрын

Thanks! Did it with your help.

@charlesjacksoniii8787 5 жыл бұрын

Great tip.

@asderven 2 жыл бұрын

Thank you for the video. I had a question. I was looking at bosch circular saws and blades. How do you know the diameter of the blade will fit the saw? The bore diameter is listed as 25mm or 25.4mm and the bore diameter of the blade is listed as 30mm. Would they fit together? would I need a ring? or is the difference too big for a ring? If I want to measure which bore diameter saw blades I can use with a circular what part do I need to measure? Thanks for all your videos, they are really helpful in explaining the details, and I get the courage to buy and use the tools to make things.

@survivalmansurvivalman365 4 жыл бұрын

Thanks for the video couldn't figure out how to lock the blade

@mary5292 4 жыл бұрын

Thank you for Colorado !

@grahamwaters3962 2 жыл бұрын

THANK YOU! took me literally 1 minute

@Hizzle2theCizzle 3 жыл бұрын

thanks Dude!... very helpful!

@joer5627 13 күн бұрын

Thank you

@brunomerlino92 Жыл бұрын

Can I install a 7-1/4" blade on a Ryobi circular saw that uses a 8-1/2" blade safely? Or ONLY 8-1/2" for this model saw?

@jobacuda4472 6 жыл бұрын

Nice video.

@alinprimete5664 2 жыл бұрын

I just bought a Erbauer circular saw. I need to cut some laminate wood, so I need to change the blade. Can I use a blade from Bosch? Thank you

@jeaninesantiago7436 Жыл бұрын

Thank you so very much.

@magicrobharv 3 жыл бұрын

Great video.

@Jose-eu4em Жыл бұрын

Thank you🤘🏼🤘🏼🤘🏼🤘🏼

@DRP1013 2 жыл бұрын

Hi, I have an Chicago Electric brand circular saw from Harbor Freights but as I’m sawing the blade starts to curve to the right against my will! Any ideas how to fix that?

@tomlee7651 5 жыл бұрын

Just what I needed. Had my blade facing wrong way. Thanks.

@TheHonestCarpenter 5 жыл бұрын

@Tom Stanley You're welcome!

@erikvolk9393 3 жыл бұрын

@@TheHonestCarpenter ;,

@erikvolk9393 3 жыл бұрын

@angellas.1314 3 жыл бұрын

I was told that the manufacturer likes to have their logo facing outside. So that is what I tend to go by. And also know the blades circle upwards.

@austincole3483 3 жыл бұрын

Them diablo blades no joke I love em, make great bi-metal blades

@gamesforyoutwo 3 жыл бұрын

I'm just here because I'm too lazy to whip out my manual :) Also, thank you sir.

@TheYjmfan Жыл бұрын

Hey I’m new to my circular saw, just noticed on my macallister saw the loosening is anti clockwise the saw direction . Your one makes perfect sense, my one ??

@roblovegreen Жыл бұрын

Thanks

@AmeenHandyMan 3 жыл бұрын

hai what kind model your circular saw? and size arbor your circular saw?

@bonniehogue5712 2 жыл бұрын

helpful, thx

@santosrascon4350 4 ай бұрын

Excellent instructions. You make it look so easy. What happened to my small tool to remove screw? 😮

@lesliereneefox 3 жыл бұрын

Do you have a video on how to select a new blade? I need a new blade for my table saw (I think), and the options are overwhelming. I was googling this and then I thought, "I wonder if the Honest Carpenter has a video on this?" :)

@TheHonestCarpenter 3 жыл бұрын

I actually made a note to do that video the other day, Leslie! Coming soon 🙂

@lesliereneefox 3 жыл бұрын

@@TheHonestCarpenter Oh, awesome! The choices are just overwhelming.

@TheSokodelic 4 жыл бұрын

Hey man, thanks for the video. However, after replacing the blade and putting the bolt back on, I noticed even after tightening the bolt that the blade is still wobbly. What am I doing wrong? Much appreciated if you can help.

@TheHonestCarpenter 4 жыл бұрын

Hmm...I’m worried your mounting bolt might not be going all the way in 🤔 Might want to write the manufacturer

@buddywalstad7658 4 жыл бұрын

It would be nice if you explain how to do it for circular saw so don’t have that little stop like mine which is a Skil saw

@kbenk108 Жыл бұрын

would be nice if you explained the difference between the 2 replacement blades you linked in the description: 40 tooth vs 24 tooth

@magicharry17 5 жыл бұрын

The inner washer on my saw fell off and I noticed it had a raised side and a flat/slightly recessed side. Which side goes up against the blade?

@TheHonestCarpenter 5 жыл бұрын

Hey magicharry17, it's hard to say without seeing. If the raised side slides into the arbor hole on the saw blade, then it probably gets oriented that way. My makita has something sort of similar

@TheHonestCarpenter 5 жыл бұрын

What's your brand?

@magicharry17 5 жыл бұрын

@@TheHonestCarpenter It's a makita

@magicharry17 5 жыл бұрын

@@TheHonestCarpenter 5007MG

@TheHonestCarpenter 5 жыл бұрын

@@magicharry17 Gotcha. That's a great saw (Makita just makes the best circular saws in my opinion). I actually went out and checked mine--it's an older model obviously, but I saw the flat and raised parts of the inner washer. I had the raised part facing in, but I actually just changed it to face out because the recessed side seemed to fit better that way. You may want to consult a manual or even write Makita, but for what it's worth, I've cut about a million board feet with it the other way and it's never fussed. I'd be inclined to thing the tool is pretty tolerant either way so long as the outer washer and nut are tight.

@shadowdance4666 7 ай бұрын

Can you resharpen the old blades because I bought a 9.99 special from Walmart and it sucks

@fyall123fu Жыл бұрын

Thank you. My manual stupidly doesn't tell me how to do this at all. You've been a big help sir. 👍

@TheHonestCarpenter Жыл бұрын

I’m glad it helps! 🙂

@californiaboy1godbless108 4 жыл бұрын

Thank you very much and hello for Long Beach California🤝🏼👍🏻

@ticesine6589 4 жыл бұрын

I dont see a lock button like that on my crappie black and decker , is there supposed to be a tiny bit of play back and forth on the blade

@TheHonestCarpenter 4 жыл бұрын

Hey Tice, I haven’t handled the black and decker, but I have felt juuust a little arbor slack on a lot of circular saws. As long as it’s the whole mechanism moving, and not just the blade sliding around, then it may not be too bad. Just handle carefully!

@chinito20fam 2 жыл бұрын

Just ɛurchased a saw. And mienbdidnt come withbthe tighten bolt. In order to even turn the dae on. Or the ase can come out flying out.

@dd___dc 4 жыл бұрын

good explain video i found an old 1 test it out da blade was real wobbly checked da screw it was real loose it didnt have da 13mm wrench so i used a rachet dan luckly it had a hole and stuck a torx screw driver and tighten it

@TheHonestCarpenter 4 жыл бұрын

Thanks for watching DD! I’m glad it helped 🙂

@TheHonestCarpenter 4 жыл бұрын

Thanks for watching DD! I’m glad it helped 🙂

@blairr97 3 жыл бұрын

Wow thanks feel like an idiot trying to change the blade now I know about the break button 1minute job

@sk8queen 8 ай бұрын

I got frustrated with the instruction book. Thanks for the video.

@kyleMcBurnett 2 жыл бұрын

How do you properly dispose of the old blade?

@pyrofful 4 жыл бұрын

Thanks looks easy after seeing how to do it

@u.sonomabeach6528 2 жыл бұрын

I've seen people wedge the blade so that it is cutting into a piece of scrap wood and then tighten/untighten the blade if they have a saw that doesn't have a blade lock. Does that harm the saw in any way?

@jesuscentralcali4879 3 жыл бұрын

Righty tidy lefty Lucy

@judyl.761 Жыл бұрын

You should have discussed that with some saws you need to install the blade with the printing on the inside!

@drcl7429 Жыл бұрын

So the blade cuts upward?

@iowaunemployment 5 жыл бұрын

Thanks, I could not find that locking button.

@TheHonestCarpenter 5 жыл бұрын

They really hide it on the makita 😂

@iowaunemployment 5 жыл бұрын

@@TheHonestCarpenter It turned out my old craftsman had no break other than a 2x4. When reinstalling a little oil let me finger tighten.

@TheHonestCarpenter 5 жыл бұрын

@@iowaunemployment Waaay back in my career, I can remember holding the blade with rag and turning the arbor nut. Whatever gets it done...safely :)

@footyvidz2168 3 жыл бұрын

is that a left handed circular saw?

@jackoshaw 3 жыл бұрын

Thanks for the info...... I should know how to do something as simple as changing a saw blade, but didn't know about the little catch on my saw..... If you have any doubts, check KZfaq!

@TheGuardian.-du3kc 8 ай бұрын

Change blade in Mini table saw

@lblasso 3 жыл бұрын

Why does the saw rotate counter clockwise? Don’t you want the chips to fall on the floor.

@jobacuda4472 2 жыл бұрын

Lynn, if the blade rotated in the opposite direction, it would pull the saw forward aggressively. Always wear safety glasses when cutting anything.

@lblasso 2 жыл бұрын

@@jobacuda4472 Thank you. Never knew.

@awwo9351 2 жыл бұрын

Put your videos on Rumble!

@rogeriosantos321 10 ай бұрын

I was skepticle of a 20 volt circular saw. But I have several B&D 20 volt batteries and the drill Works great kzfaq.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . I saw the 4 stars and some glowing reviews so decided to purchase this saw. Well, leave your money in your pocket and run a cord because this little saw won't cut

@God0fTime 11 ай бұрын

don't forget to square the blade

@Manaviecreations Жыл бұрын

😃🙌🙌🙌😀

@danielhanney3326 2 жыл бұрын

Just bought a new one from Dewalt..and the hex bolt will not budge..I'm almost bending the hex key..and it still won't loosen..why the hell do DEWALT tighten this so much at the factory!!...really pissed off at their stupidity. 😡

@xgum 2 жыл бұрын

nut won't turn on my ryobi..

@user-jz9hs7wy4z 13 күн бұрын

My saw has no brake .

@dentalmanuk 3 жыл бұрын

Oh God how much time these guys take for a less than a minute video.. plz be to the point

@angellas.1314 3 жыл бұрын

This is very helpful for novices, like me.

@dentalmanuk 3 жыл бұрын

@@angellas.1314 trust me am more novice than u but still it should be less than a minute video

@angellas.1314 3 жыл бұрын

@@dentalmanuk I personally like the details and the rational for it.

@temirtaragay8932 Жыл бұрын

This video is produced without thinking first. Let me tell you why. He does not tell which skillsaw he is demonstrating blade removal. He did not tell skillsaw has reverse thread. Please do your homework first snd don't misinform people so they don't waste tgeir time by following your video. Thank you.

@dingaling487 2 ай бұрын

Holyshit get to the point

@31acruz 2 жыл бұрын

dude... get on with it, the title says how to change the blade, is it left hand or right hand thread, after you go to it if you want to babble on more go ahead, those who want to listen can but don't torture us who are in a hurry and clicked in to remind ourselves how to install it.