I have never seen that locking mechanism on a circular saw. I always used a nail through the blade to keep it from spinning. 😎 Love your videos Uncle Knackahs.

Thank you so much! My husband and I received a saw for our wedding and it came with zero instructions on how to put the blade on. You saved me a ton of hassle.

This was perfect. Appreciate the advanced warning on the joke, I needed to be prep'ed for that one.

My Makita was clockwise to remove... so turning to the right, and then turning to the left to tighten back. Completely backwards from 99.9% of screw-ons I've ever used. It would not have occurred to me before I watched this video. Must be a southern hemisphere version of the tool! Thanks for this video!

I was just here for the dad jokes, but glad to see a video for absolute beginners, where we all started from. I just wish I could miniaturize myself like you did to put both my hands on that Allan key, there!

I love the dad jokes - and the tips and tricks are okay too! Just kidding! As a newbie woodworker, I've learned SO much here, and also watched a lot of your videos about safety! ❤ KZfaq is horrible at letting me know when a new video from my favorite channels (despite bells and everything) is coming out, but I do come here at least once a week to see if there is a new one, or to watch some old ones! KZfaq can't fool me! 😁

Brilliant! Good tips, I actually have managed to switch a couple of blades on my circular saw, but this overview certainly will save me from some fumbling with the direction of certain things 🙏🙏😁😁

Good saw tip! Love the dad joke....my kids hated it....but that made it JUST that more funny! Cheers, Scotty (Norway)

Splendid, old chap! What a joy to watch your tips and tricks! What about double blade fixing? See you, good Merlin!👍

My saw is a right handed one so it’s lefty tightly and righty loosey lol. I love this it’s like you we watching me cause I just put a new blade on. Label always goes facing out. Good job.

I learn a lot from you and watch your videos even when I know how to do what you are covering. Maybe it is for the added value of the jokes!

THANK YOU! I have a Dewalt, newbie DIY guy here, no experience. Couldn't get the $%$# blade installed, as the release wouldn't go all the way down, unable to tighten the blade. Unbelievably frustrating. After 5 different videos, FINALLY, your suggestion to "jiggle" the blade a little was the secret. Immediately it tightened, blade working perfectly. Thank you for explaining things properly for us rookies!

Great teacher! Thank You! Bread in captivity, funny!

Спасибо за видео. Безопасность прежде всего-ни один из десяти пальцев не лишний))

What! 😳 You have to change the blade! I usually wait till all those rough bits are worn off then buy a new saw 🤣🤣🤣 Great tip Knackers 👍 This'll save me some $$

SUPERB !!!!

Very detailed step by step instructions. Love the dad jokes!

You are a legend! Thank you for existing ☮️💟

sound and simple - no mambo jumbo /thanks

Good show Unk!!!!!

Just picked up on your channel. FECKING love it!

Fair but strong work knackas. You've done well mate....

Excellent content as always, mate! Keep it up! 👍

Nice video, I can understand now why they make the saw nut so you can use a spanner too, you forgot to put the Allen key back lol All the best and already looking forward to your next video.

Bread in captivity. Ah knackers, as the kids would say (and have said) Rodrick humour. The same as Dad jokes only no parent required. Gotta love that rain. 110mm in the rain gaugey thingo over the past two days. Lovely wifey emptied the rain water tank 2 days ago. 5000 litre tank. When we got up yesterday tank was overflowing from the outlet. There was so much rain coming down the overflow was not working - it was actually going out the inlet instead. Hard to believe. Back inside watching videos because cleaning up garage and doing little bits of organising around the garden shed I embarked on clean up garage not touched since when I was still surfing every day. Lots of dirt grime gunk amd rodent poo. Not hygienically clean. No gloves because I'm tough. Not tough enough: like Mrs Marsh they do get in (my finger) swollen like a balloon. Double strength antibiotics and just waiting to get back into it. Thanks for the video. I would have loved this info a few years ago. But also useful reminders to stay safe mate.

Great tips👏thanks.

Again. TOP CLASS!!!!!!! EL CLASSICO. James in Dublin 🎯

Thanks for your timely video!! No wonder I couldn't get the stupid bolt to turn!! I was going in the WRONG direction!!🤪

Another great vid Uncle. Great content for new starters. Luvin’ the dad jokes mate. Keep ‘em coming.

Nice explanation, looking forward for more upcoming videos

Great video’s mate, very informativ, with a small touch of humor, big thumbs up from Holland👍👍

Thank you, just thank you!!

Mate you ain’t making any dough with that dad joke 😮🧐 anyhow wishing you much success with the course 🇦🇺🍻👍

Hey uncle, thought for mo your mini course was all about how to drive a Mini !! Great vid as always, thanks mate, stay safe and keep out of trouble.

We need a compilation video of all the dad jokes!

Great tips as usual Shane, I think the Dad joke could just be the best yet!!🤣🇬🇧

The Circular Drive sign would have been good here.

Exactly said well.Frequently I confused.So I marked the direction on the safety guard by marker pen on my Black and Decker Circular Saw. N.Sugumar,(Retd.Deputy Registrar) Tirunelveli, Tamilnadu, INDIA.

You are one smart 'Byron Bay Cookie', mate. (Don't I sound extremely Australian?) Bread in captivity......I love it!! How could anyone turn down a chance to be instructed by Professor Knackers??? I'm looking forward to earning my CSD (circular saw degree)!

loved the video unc!! i also clean my saw blades with a wire brush to get even more life out of one blade and cleaner cuts, its very handy because i use my circular saw also as an tracksaw (kinda) i always love the dad jokes unc😂 and i can't wait for the mini course!!! have a great weekend unc!🍻

Hi Shane just signed up for the circ saw tutorial what a great idea , I’m comfortable using my mitre saw but I could use some tips for the circular saw .

Bread in captivity....that's rich....Love the dad jokes!!

i love the sign in the back of the intro, tool rules, dont touch, dont move, dont borrow dont even look

Dream tools someday someday i use grinder to cut plywood to make cabinet hahahha very dangerous makita very expensive tools

brilliant vids, thank you, do you have any vids on selecting and using Bandsaws

*16-cı bəyənmə məndən.* 👍👍👍 26.03.2022, 12:12

Got a bit of a bargain lately, Shane. A used Makita 7" 18v circular for £30 (53 Australian dollars). It was an old ni-cad saw but I have a couple of converters for Li-on batteries that I use on some drills. It's really light compered to my other 10" cornered circular and I wouldn't be without it. Oh and by the way ,Klopp. Thanks for stuffing Chelsea's season in the FA Cup and league cup🤣🤣🤣 Look forward to the next video.🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺

LMAO... Your joke´s kills it :)

My dad ''Have you been using the circular saw?'' Me ''No dad, why what's wrong with it?'' Dad ''Well it's not cutting the wood any longer......it's only cutting it shorter'' 🤣🤣🤣 Me 🤦‍♂️🙄

Bread in Captivity 🤣

Good joke. I liked it

Mate I need to learn how to cut and measure external and internal mitre cuts with aluminium angle , starting at 10x10, I also need to understand the measurements between internal and external , can you point me in the right direction 👍

I hope there are tips on using a circular saw to cut extra crusty french rolls...

Rather than a shifter if the Allen Key is not available, I would find a socket that fits and use that. (Hopefully not a 10mm one tho' Lost all of mine along with flat blade screwdrivers :-) )

Worked with a carpenter for a while and he somehow put a magnet on his locking button so you didn't have to keep pressing it down, it wasn't perfect but this was years ago and with the ready availability of rare earth magnets, I'm sure someone out there can perfect it

love that joke-took me a bit lol

I know full well how to do this, I'm just here for the dad joke 😂

My dad used to Lefty loosy, righty tighty...

Help Me Please????? i actually had a smirk and a smile on my face after hearing that Dad joke, Twice, i rewind to the joke so my wife could hear it and i smirked and smiled again and my wife just shook her head, mind you i shook my head as well, so that means the smirking and smiling must have been wind, yep that's what it was a bit of wind ha ha ha. Stay Safe My Friend, Barry (ENG)

Knackeerrrrsss!!! Loving the channel mate. Could you advise me on a project please. We have a large 3 and 4 seater sofa. One of them has developed a small bow in the middle. I’m thinking of taking all the legs off and building a wooden base to attach to the underside of the lounge, which is rebated to attach a front mould or trim. Is this as simple as building a base from construction pine and allowing enough rebate to fit the trim. Any tips or advice would be sensational mate. Waz

Hey uncleknuckle thanks for the video. I have a Ryobi R18CSP that I bought in 2021 here in New Zealand without knowing much (came with a set of 9 tools) included an 18T blade. After another video of you I learned about the amount of teeth so I went to Bunnings and bought a 40T blade but the wrong size (165mm, knuchleahead). So I'm checking and seems only Ozito brand is available with 36T at Bunnings within the 150mm size. I've checked other retailers and none of them have that size. Could you please share any advice? thank you in advance.

😁😁Your Dad jokes are getting as Lurch would say .... AAAAAAHHHHHHHHHH (incert deep moanfull tone here ) lolololol Goo to see the series moving forward mate :)

Dws780 miter saw ..donde la comprastes..y cuanto te costo.?

Hoping everything is alright with you!

When’s the next build, Uncle?

I have to use a screwdriver stuck between the teeth to lock the blade. I guess I need a new saw. 🤔

Ha I clamp mine in vice

I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great kzfaq.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.

Hi does food need

are you the coach of liverpool fc?

another ripper video but you were loafing around when thought of the Dad joke .

Thumbs up for the dad joke!

Actually I quite liked the Dad joke this time.

I would argue that if you don't already know this stuff then you shouldn't own a circular saw. I'm typing this with the last two fingers I have on my right hand. Only joking.

Mmmmm I guess reading the manual is out of the question.

sorry, enjoy pretty much all your vids, but owners manual supplied with each tool should be enough for even the basic knucklehead... look fwd to more advance tips and projects

Where is new video unkle knackles?

I only watch for the dad jokes

My saw doesn't have a blade lock

excellent totally idiot proof video. All vids should be made assuming that your old granny is trying to follow...that would cover most of the rest of us🙂