How to Change Drum Brakes (In-depth, ultimate guide)
Рет қаралды 2,388,409
Күн бұрынLearn every step of how to change drum brakes. This drum brake replacement is specifically for a Ford Ranger pickup truck, but it applies to most other cars as well. YOU CAN DO THIS. No special tools required and it will save you a lot of money! After watching this video you can replace the drum brakes in your car!
Replace the wheel cylinders: • How to Replace a Wheel...
Replace Different Brake Drums: • How to Change Drum Bra...
Drum Brake Spring Kit (inexpensive):
www.amazon.com/s/?_encoding=UT...
Drum Brake Tool (to make the job easier):
www.amazon.com/gp/product/B000...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzfaq.info_c...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
@mmbrains27 10 жыл бұрын
So my breaks were acting funny and I went in for an oil change and they said they'd look at my brakes for free. Long story short, they said I desperately needed rear breaks for my 2003 Dodge Dakota. They quoted me at $500.....went somewhere else and they quoted me $600. I was freaking out so I youtubed "How to change drum brakes" and you made it look so easy so I ended up doing them myself and I did a great job if I do say so myself. You saved me over $500 and having to eat Ramen 3 times a day for a few months and I can't thank you enough! Great job, bro.
@chrisfix 10 жыл бұрын
Great! Glad the video helped and you learned something new!
@venividivici4253 4 жыл бұрын
Michael Cantu Bro Ramen is not healthy for you. 3 times a day? Did you loose your job or something? No offense though.
@OneHippiesMusings 4 жыл бұрын
@@chrisfix Going to have to do the brakes on my jeep, this is going to help immensely. Hope you're doing well all these years later.
@o11o01 4 жыл бұрын
@@venividivici4253 You say that like people eat Ramen by choice, and not out of necessity.
@rubenvarela4077 3 жыл бұрын
@@o11o01 i eat them there are good with hot sauce
@glenniz1 4 жыл бұрын
You were so young, yet already showing greatness Chris. After just eight years, you have become a "DIY Car Guy" Favorite! Job Well Done Buddy!
@rongamblin2107 4 жыл бұрын
Chris, I have watched hundreds of your videos and you just keep amazing all of us. You have a strong work ethic and I try to use you as an example of being confident and having a YOU CAN DO THIS attitude. Thank You for all you do.
@chrisfix 4 жыл бұрын
Thanks a lot Ron!
@fredrezfield1629 Жыл бұрын
@@chrisfix why not replace the wheel cylinder?
@F3Ibane 9 жыл бұрын
This is easily the best automotive how-to video I've ever seen on the internet. Clear and easy to follow, and the fact that you took the time to demonstrate how everything goes together (fx, the retaining pin/spring/hat assembly) is super helpful. I've never done drum brakes before and honestly before watching this video I was intimidated. Now I'm actually looking forward to replacing the shoes and drum on my wife's car. Excellent video!
@chrisfix 9 жыл бұрын
F3Ibane Thanks a lot! I do my bet to make all of my videos clear, easy to follow, and concise!
@chrisfix 9 жыл бұрын
F3Ibane Here is another drum brake video which is also helpful: kzfaq.info/get/bejne/sLCPiLuBm627m6s.html
@robertclymer6948 2 жыл бұрын
Hi Chris! Hard to believe this video is almost 9 years old. WOW. Me and many have drawn from your expertise and knowledge with our car and truck projects. Always great info and professional "how to do" that has gotten us through many things. Thanks Chris! Love and blessings from Motown. Keep up the excellent work.
@chrisfix 10 жыл бұрын
Haha, that is good! I am glad my video is on top! That is such an honor for youtube!!! Glad the video helped! Thanks for the comment!
@maikemi 7 жыл бұрын
Superb patience. Steady delivery of detailed information in realtime. I use a lot of video "show to" shows, but I think this fellow is the best.
@chrisfix 7 жыл бұрын
+Don McCormick thanks Don
@terryg3116 9 жыл бұрын
Chris, what you are calling the parking brake adjuster is actually the regular brake adjuster and comes into play each time you back up and hit the brakes firmly. As the shoes wear down, the action of backing up and firmly applying the brakes makes up for any wear on the shoes to keep the brakes adjusted. This also applies for the older cars that have brake shoes instead of disc brakes in front.
@chrisfix 9 жыл бұрын
Terry Gandall Thanks for the tip Terry!
@1headone 8 жыл бұрын
Chris your video's are top class and help us "clueless" mech's more than you may know, my hat off to you and the work/vid's you do, fantastic man keep on, keeping on ..... many thanks.
@thesaltycabbage 3 жыл бұрын
Just watched this after seeing your new videos and it is amazing to see how far you have come!
@chrisfix 3 жыл бұрын
Old school ChrisFix :p Thanks!
@Teribus13 8 жыл бұрын
Hey Chris. From a Scottish mechanic also called Chris, just want to say your videos are really great. Very informative and detailed. They are very beneficial for DIYers. What amazes me most is that you never swore once while fighting with some of these springs on your drum brakes. I was swearing just watching the video! Wish I had your patience! lol
@bitsinmyblood 8 жыл бұрын
Nice. One question: If you've got that new spring kit, why are you reusing springs?
@airplanemechanic5561 2 жыл бұрын
I wondered the same thing. I cannot understand this.
@peacefulsalvation 2 жыл бұрын
Easier to get the old springs back on they usually have less tension
@chrisfix 10 жыл бұрын
No prob! Glad the video was helpful!!!
@Ramirez4565 8 жыл бұрын
Hi Chris! Although this video is a year old I'd still like to let you know that this has helped me on me restoration project for my grandpa. Thanks a ton! You're doing great work, keep it up!!
@tomtheman01 9 жыл бұрын
Thank you for this video. Saved me a lot of money, and helped me spend time with my son
@chrisfix 9 жыл бұрын
+Austin Griffin to get the tire off, kick the top and bottom of the tire with your heel. Once you get it off, make sure you put some antisieze on your hub and the back of the rim where it contacts the hub so it wont get stuck again.
@AustinGriffinUrsa 9 жыл бұрын
where do you jack up the back of your truck? I have same one but ford version and their manual says not to jack it up by rear differential...
@chrisfix 9 жыл бұрын
Austin Griffin I jack it up from the big metal cross-member in the front and from under the rear diff in the rear.
@AustinGriffinUrsa 9 жыл бұрын
Thank you! I actually did a little research and the most likely reason for Ford saying not to use the rear diff is because they assume you are using the small jack that they provide you with. Which you dont use and I didnt plan on using. Finally got that wheel off too.
@chrisfix 9 жыл бұрын
Austin Griffin That makes sense. And great! Let me know how it goes!
@stanleysaenger667 8 жыл бұрын
Please do a face revel I know you live in new Jersey and I know the two rest stops ur were at when u tested the fuel addodeve that u sent to 23 subscribers. Please do a face revel when you hot 100,000,000 subscribers
@chrisfix 10 жыл бұрын
Thanks a lot! Yea, i really like the picture. Some people say just look at the other drum brake but it is reversed and backwards so it confuses me sometimes. Plus you have to go back and forth which is a pain when you just want to sit in one place to get the job done!
@harrygaul4475 Жыл бұрын
I have a 2003 Ford Aerostar van and it was almost identical to the video you did @chrisfix thanks!!
@MrsBuddevil 7 ай бұрын
I'm still struggling with this
@chrisfix 10 жыл бұрын
Great! You can easily do both of them in a few hours. It is straight forward and you can always use the video as a reference! Good luck and let me know how it goes!
@CarminesRCTipsandTricks 3 жыл бұрын
I still can't believe that the previous owner used a BOLT instead of the proper Retaining Spring, which is not only cheap new - but are lying on the ground in the hundreds, in any Auto Wrecking Yard! SMH 😖😠 Glad you caught it in time!!
@MercuryRisingFast Жыл бұрын
what episode did you get the branded ChrisFix voice, and presentation manner?
@gsabella4 2 жыл бұрын
Damn, Chrisfix was low energy back in the day. Good to see your content from different stages of your career!!! keep it up brother
@bradforddrake8633 3 жыл бұрын
There are 3 places on rotor plate that should be greased with a dab of grease. Also grease on the very top on that metal circle. When I changed my brakes I noticed that the 9 inch rotors have a metal part that pushes into wheel cylinders(no metal plungers that look like clothespins) and also the emergency brake lever has a hook that fits on back of shoe near top(no metal bolt with C clamp). I changed my wheel cylinders also and had success on the rear right brake, but the brake line nut on rear left was rusted shut. I had to cut brake line with hacksaw. Then I made a new brake line,using old line as a template with a tube bender.Then I used one man bleed brakes technique. Now I have firm brake pedal! Thank you Chris for your GREAT videos!
@asaturn 6 жыл бұрын
tip for anyone reading: check the piston for leaks by carefully pulling on the rubber boots. if brake fluid comes out, you need a new piston. also, when you re-assemble, put a little bit of thick grease on the center hub where the new brake drum sits on it (NOT on the braking surface). this will help down the road when you go to pull off the brake drum as well as keep water out.
@ravengsxr 9 жыл бұрын
Pretty good video, probably the best drum brake vid i've seen on youtube. Thanks for sharing. I now feel ready to go for the drum brake job on my car.
@stevebray71 7 жыл бұрын
I know this may be an old video now but when I was taught to change mine I was told to always check the condition of the rubbers around the brake cylinder and make sure that there was no signs of brake fluid leaking from the seals. I'm not sure if any one else has been taught this was but I thought that I would just share this info. Keep up the great videos Chris you have a real great way of explaining things in a way that so many people can understand
@CarminesRCTipsandTricks 3 жыл бұрын
Chris.... I got here from your 2018-9 version of this same Job. WOW you can really SEE the improvement in not only your confidence, but SKILLZ as well!!! You're a great Kid, Chris. I'm a Disabled Veteran and Retired Ford Driveability, Chassis and Engine Tech. Today's SCREWED UP World needs more good People like you!! I for one, am proud of what you've accomplished. I'm just sitting here, marathon watching your Videos, quite melancholy... We couldn't afford Thanksgiving. We can't even afford a stinking Tree or paper decorations. 💔😞 No Christmas either. No Presents for my Grandbabies. We're completely on our own. I made the mistake of swallowing my pride and asked KZfaq Viewers for a little financial help... I was promptly labelled as a SCAMMER. 😞 We're Praying that 2021 is even a little better for us.... We wish you and your Family the most Joyous of Holiday Seasons, a very Merry Christmas 🎄❄ and amazing New Year! 🎉🎉 Carmine ✈🚂🚙
@alien_menace971 10 жыл бұрын
You had a good idea to take a picture of the brake assembly and then print it. But back in the days when I first started, they did not have computers and printers to do so. The adjuster at the bottom that you were calling the "Emergency Brake Adjuster" is actually called a "Self - Adjuster" so every time you back up fast and stomp on the brake a few times, the self-adjuster will tighten up. Keeping your shoes snugged. That way, it would have less distant to travel when you brake. The cable and spring assembly that you put together first was your "Emergency Brake". It pushes the back shoe out to lock it in place. And the last cable you put on that looped around the horn at the top was called the "Adjusting cable" for the "Self - Adjuster". And "people" you don't have to take out the "Wheel Cylinder" just because the outside looks like crap, as long as it doesn't leak. It's still works. I have a 1990 Lincoln Town Car, and it has rear drum brakes.
@chrisfix 10 жыл бұрын
David Miller Thanks for the info and tips!
@1guy2rule 10 жыл бұрын
Best instructional video on KZfaq by far, great guide.
@chrisfix 10 жыл бұрын
Thanks! Glad it was helpful and thanks for the awesome comment!
@SteveFisherTattoos 10 ай бұрын
I just found this video to work my new cars brakes over, and man do you sound so different lol. The whole energy lol. It's funny looking where we start and where we are currently lol. Thanks for all the info for over a decade buddy
@jimdavenport4484 Ай бұрын
Great video you explained the process flawlessly and you taking the time to show each step was extremely helpful. I wish all DIY videos were done with this much attention to detail.
@chrisfix 29 күн бұрын
Thanks a lot!
@wisb_1658 8 жыл бұрын
every thing I KZfaq on how to change or fix something on a car chrisfix always shows up -thanx a lot your work is great
@chrisfix 8 жыл бұрын
+willis jordan Awesome! Glad to hear it!
@TomGlander 7 жыл бұрын
Another good one. Lots of valuable information here. Keep up the great videos!
@chrisfix 7 жыл бұрын
Thanks Tom!
@MsNailgun 7 жыл бұрын
Fantastic video. I am a wiz at front brakes but I've never done the rear drum type. You're video was simple, to the point and you explained everything very well. I am confident I can tackle this. If I can replace a brake line, cut and double flared, I think I can handle this. lol Thanks for the great job.
@danzigii8342 5 жыл бұрын
Dude you are the man . I have a 2004 ranger I use for a work truck daily driver .and your channel has helped me save so much money and just be relatively informed about the Ranger platform that I am driving . I love these videos keep them coming man!
@jayyoutube8790 8 жыл бұрын
I tell ya Chris.. I would rather pull an engine and trans than do drum brakes... I may consider now after watching your vid.. Good vid, Thax..
@lanceuppercut5939 2 жыл бұрын
Awesome video, thank you for being so thorough and precise with your explanation. Drum brakes can be real tricky and scary to do, your video makes it a lot easier. Thanks
@chrisfix 2 жыл бұрын
I'm glad the video made the job a lot easier! Thanks a lot!
@justaratinacag3 3 жыл бұрын
I start a new job Monday after being unemployed for 3 months and my back tire seized from what my buddy assumes is a bad cylinder. Your video is extremely helpful and other than the springs I feel like I might be able to do this before I miss my new opportunity. Thanks for posting your knowledge!
@sagenate7267 8 жыл бұрын
Bravo! I enjoy these shade tree mechanic marathons. Nothing like old parts, time, and a heart full of determination. ChrisFix, you totally get it!
@chrisfix 8 жыл бұрын
Thanks Nate!
@tonytran1711 8 жыл бұрын
Thanks , very informative and detail video. Thanks again for spending your time to film this video.
@chrisfix 8 жыл бұрын
No problem. Glad you liked the video!
@chrisfix 10 жыл бұрын
Haha, maybe it is just one of those days! It happens to the best of us. Hopefully the video helps clear some stuff up! Let me know if you need any help (comment if you do)
@lamontdixon175 9 жыл бұрын
Best video ever. I think I'm ready to change brake shoes for the first time in my life. Thanks
@videoparker28 8 жыл бұрын
Got to say thank you my man. I was always told, "oh man drum brakes are next to impossible without the right tools", and " dude drum brakes are not for the back yard mechanic to be messing with". I watched your video and did not see anything beyond my skill set. So i went out and got shoes, spring kit, and drums for my Jeep TJ and within 90 minutes, I had brakes again...Very easy and all with 2 pairs of needle nose pliers...that's all. your video was exactly the set up I had in there. So bottom line, THANK YOU FOR TAKING THE TIME TO POST THIS VIDEO.....MADE A DIFFERENCE IN MY CASE.
@chrisfix 8 жыл бұрын
+Jason A. Parker No problem! I am glad the video was helpful!!!!
@dc5723 8 жыл бұрын
Awesome vids, thanks Chris Fix!
@86CJ74U2NV 3 жыл бұрын
Just FYI to the readers...A brake tool is about $5-$6 dollars at Harbor Freight. Get one. You'll cuss much less and get done a lot faster. Do one side first, that way if you need reference, you can use the other side that is untouched to know where everything goes (I'm here because I didn't and needed a reference).
@michaelcole7162 3 жыл бұрын
Just cussed like 40 times on that part
@rodneystuder 5 жыл бұрын
Great how to video I've done drums before but wanted a refresher and found your video brought me right back up to speed thanks buddy
@telcomguy1 7 жыл бұрын
your tip using the box wrench to hook up the top springs is priceless. Thanks
@cac7549 8 жыл бұрын
perfect videos. thank you.
@chrisfix 9 жыл бұрын
Captainpegs07 This is a craftsman needle nose pliers but I dont really like it. It is strong but doesnt have a good grip.
@SvddenDeth 9 жыл бұрын
where can i get the rebuild kit for my 91 celica? thanks ebay has none
@chrisfix 9 жыл бұрын
Right here: www.amazon.com/gp/product/B000C71HU8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000C71HU8&linkCode=as2&tag=chri0e2-20&linkId=P5X6Q7AFNILSG7W2
@Rodney5822 8 жыл бұрын
+ChrisFix Hey you should mention in a vid that the slot behind the drum brakes is for adjusting the brakes while the drum is on. It's really nice to be able to adjust them down when you are taking he original hub off. You had came a cross this problem in one of your previous drum vids.
@billtheunjust 7 жыл бұрын
That is important! I thought my drum was rusted to the center shaft/hub. It turned out that it was only stuck due to the brakes having dug a groove over the years. After releasing the adjuster all the way I was able to remove the drum by hand.
@buckmajor 7 жыл бұрын
What is an emergency brake? Is that the same as hand brake?
@quaternion-pi 10 жыл бұрын
Your "ultimate guide" ultimately saved me several hundred dollars. I had just given up trying to do this and had made an appointment with the mechanic ($100/hr labor charge!) until I watched your EXCELLENT video, Turned out perfectly without a hitch. My only reservation was you didn't use lubricant on the backing plate, but I saw your explanation in another post. Thanks for sharing this!
@chrisfix 10 жыл бұрын
Glad the video helped you finish the job and save big bucks!!! Yea, I have had a better experience with no lube, but to each their own as they say. Thanks for the comment!
@simontek4488 10 жыл бұрын
From person experience not doing so, Taking a picture is the BEST advice ever.
@chrisfix 10 жыл бұрын
Haha, thanks! It comes in handy!
@johntunnage3098 3 жыл бұрын
if you dont have ink in your printer do one side at a time then you have another complete correct setup to reference
@gilbertvargas4470 10 жыл бұрын
Great instructional videis keep up the good work
@chrisfix 10 жыл бұрын
Thanks man!
@jamesfalvey77 7 жыл бұрын
i can do this !!!!! chrisfix for president!
@iwpsurf 6 жыл бұрын
Awesome videos. Clear explanations and clear video footage are rare combinations. This guy does both exceptionally well.
@pnolans 7 жыл бұрын
I've watched less than 5 minutes... and I have to say THANK YOU... taking that picture and laying the part where it came from is pretty gol-durned SMART! Plus... I can see what you're doing, I can understand what you are saying, you take the time to zoom in and show details, you're not drinking and cussing or in love with the sound of your own voice. One of the best instructional videos I've seen on KZfaq YET! Thanks.
@chrisfix 7 жыл бұрын
Glad the video was helpful!
@Pchychopathetic 8 жыл бұрын
i saw the missplacement of the right shoe and i got paniced that you would not see it.. thank god you did! :D
@chrisfix 8 жыл бұрын
+Pchychopathetic haha, yea, that is why you always go back and check your work! Good eye!
@av_envy 8 жыл бұрын
I saw that too.... gud thing u saw it bro
@Pchychopathetic 8 жыл бұрын
+Abhinav S cheers m8 :)
@av_envy 8 жыл бұрын
+Pchychopathetic (Y)
@chrisfix 10 жыл бұрын
Check out my newest drum brake video: How to Change Drum Brakes (In depth, ultimate guide) 2 This one is a different style drum.
@justinchurch2366 7 жыл бұрын
ChrisFix Spot on as always, keep them coming!!!
@DominiqueVandelay 7 жыл бұрын
ChrisFix thanks again for all the great detailed videos chris!!!!
@arifomer8603 7 жыл бұрын
ChrisFix
@arifomer8603 7 жыл бұрын
ChrisFix
@seannorris6338 6 жыл бұрын
ChrisFix wsp
@eye95records 10 жыл бұрын
i have never in my life done the back brakes on any vehicle and this tutorial walked me through it perfectly. Thanks for your help!!
@chrisfix 10 жыл бұрын
AWESOME!! Thanks for the comment! I love feedback like this! Glad the video was helpful!
@israelgonzalez8894 7 жыл бұрын
i dont understand why anyone would dislike your videos, you have very informative content i love your channel
@spind4 8 жыл бұрын
I watch this as a show
@kopboy55 8 жыл бұрын
+spind4 Same.
@ashokbhola160 6 жыл бұрын
spind4
@andrewfernandez5062 5 жыл бұрын
Same
@lawrenceumbeh7288 3 жыл бұрын
😆 🤣 me too
@ElReySupr3me 8 жыл бұрын
Disc brakes are way easier to change
@Nerd-jz2tr 7 жыл бұрын
Yes agreed
@sumitysahi4881 7 жыл бұрын
Alfredo Robles you are right
@MrTravisAl 6 жыл бұрын
Disk brakes 25 minutes. Drum brakes 2 to 5 hours. Lol
@TomsLife9 6 жыл бұрын
amen to that!
@Fifthcell 5 жыл бұрын
Yes but drums last so much longer
@alecszz334 7 жыл бұрын
ChrisFix you are a God. I always watch your video even when I'm not fixing anything. There so informational. Don't stop what your doing. Your helping so many people 🙌🏻
@ryans.5998 9 жыл бұрын
This is the best tutorial I have ever seen. Thank you!
@damkayaker 8 жыл бұрын
Good video, but why did you put put the old springs back on at 23:40 when you had bought new ones?
@213madd9 4 жыл бұрын
So he could replace the cylender after
@mattbartolovich8228 4 жыл бұрын
Replace the wheel cylinders as well it makes sense
@anismirawi 7 жыл бұрын
i hate to see old rusty parts mixed with brand new ones
@evilal20 5 жыл бұрын
Especially if the rusty parts are touching or even near the new ones, because that new one is going to rust faster if all parts were replaced
@reaper060670 8 жыл бұрын
Great tip with the taking of the pictures of the brakes. Thanks for posting another very intuitive video again my friend.. Brilliant stuff as usual..
@RojastheBlackWolf Жыл бұрын
Got a '15 civic in because of a warped drum (that's a thing apparently). Honda quoted me over five hundred just to replace the drum with parts and labor. I'm guessing they'd also do springs and pads as well, because just looking for drums, they're cheap. Like 30-60 bucks depending on which ones we get. After watching this I can see why they may charge that, but that's still over kill expensive. With very basic tools most anyone should be able to service drums. Needless to say I think I'm going to save some cash and do them myself. Thank you for this tutorial, I was getting a little worried if it was more complex than what it looks to be. I know this is an older video, but I've seen some of you're newer stuff and you're very informative and awesome with detailed step by step tutorials. Keep up the awesome work and again, thank you for sharing!
@henrydiaz3212 8 жыл бұрын
is there a reason why you didn't just replace all the hardware?
@iceman11190 5 жыл бұрын
I was wondering that myself
@DimachkaS 8 жыл бұрын
Why are drums still so widely used on vehicles to this day!? I thought they arent as safe as disc brakes.
@LORENSSIOK 8 жыл бұрын
They are used on high tonnage vehicles(pickup's, truck's). I think the last longer or something.
@beoutside 8 жыл бұрын
also they are not as exposed to the elements
@jimr8198 8 жыл бұрын
Drum brakes are cheaper to manufacture. Rear brakes only do about 20% of the braking power when you stop so can be less effective, and they last longer. For rear disc brakes, there is another drum brake under it, for a parking brake. For rear drum brakes, they use the same drum and shoes for regular brakes and parking brakes. That's why they put disc brakes on the front and drums on the rear. My Pontiac GrandAm still has the original drum brakes on the rear at 190,000 miles. I use ceramic pads on the front discs to keep the wheels clean, and they last a lot longer. Chris, your videos are great.
@auriongray 7 жыл бұрын
Jim R the 20% braking power is applied in both front and rear wheel drive cars? or only front?
@mebcool 7 жыл бұрын
It's not a "front" or "rear" wheel drive issue. It's the physics involved here. The front brakes (any make / model of vehicle - any vehicle for that matter) do the majority of the braking. It's just physics man.
@edkennard72 8 жыл бұрын
all of your videos have been a tremendous help to me and it gives me confidence in knowing that I can do the job myself thank you
@terrysmith4733 9 жыл бұрын
BEst Presentation of a rear drum repair , I have seen, tidy , organized cool and great camera work and dialogue ,, Ace !!!
@chrisfix 9 жыл бұрын
terry smith Thank you Terry!
@anthonylach8089 8 жыл бұрын
26:40 he missed the wheel cylinder piston is behind the shoe lol
@ryanclark457 7 жыл бұрын
anthony lach it is driving me absolutely fucking mad
@marklevesque1959 7 жыл бұрын
He noticed and fixed it.
@diymatt3165 7 жыл бұрын
anthony lach I know lol
@codycarson5216 8 жыл бұрын
That's the brake pad adjuster not the emergency brake
@chrisfix 8 жыл бұрын
+Cody Carson Thanks for sharing!
@aumoega7991 8 жыл бұрын
Thanks man for the video. I just change both rear end today following your video step by step also the wheel cylinder as well, because it was leaking. Mahalo from Hawaii. 👍🏽
@jessicaferro1556 7 жыл бұрын
just want to thank you for such a good quality and descriptive video. My wheel cylinder went out so we just decided to redo everything. After so many bad videos yours was a relief and the whole process went smoothly from there on out.
@chrisfix 7 жыл бұрын
+Jessica Ferro awesome Jessica! I'm glad the video was helpful!
@jordandeford1653 8 жыл бұрын
@ 27:22 y I u said to check everything.... your master cylinder piston towards the front of vehicle was not correctly aligned. While I have been a ASE and Diesel Tech for about 7 years I sent this to a gd friend who always asks how to do it even tho I showed him several times .... he finally learned cuz of this video.
@christianuy5791 8 жыл бұрын
Ha i noticed that too but at 28:50 he rechecked his work and noticed it wasnt aligned and fixed it
@ratcamaro 7 жыл бұрын
You bought a hardware kit but reused all the old hardware....
@goatboy9837 7 жыл бұрын
ratcamaro it was more of an in case thing.
@MrTravisAl 6 жыл бұрын
Because they don't make em like they used to.
@mattbartolovich8228 4 жыл бұрын
Replace the hardware for heaven sakes
@LiLNuBZz 6 жыл бұрын
Even years later I'm still coming back for help thank you so much for this badass super clear super organized video it's great!!!!
@sloany83 10 жыл бұрын
My passenger rear wheel cylinder sprang a leak this morning on my 2001 ranger edge with a bit over 160,000 miles, and your video helped make my change of drum, shoes, spring kit, wheel cylinder much easier! Thanks so much!
@chrisfix 10 жыл бұрын
***** Great! Glad my video helped and good work!
@craigdundas8721 9 жыл бұрын
26.00 minutes in you missed the guide from the break cylinder right side is off. hope you caught it before driving? Came off when you put in the strut and spring
@christiancarloayen5915 7 жыл бұрын
craig dundas j
@classic287 7 жыл бұрын
Drum brakes have "shoes", not pads....
@CrazedSymptoms 8 жыл бұрын
I really appreciate that you use regular tools and do it manually instead of electric tools so almost anyone can do it, nice!
@chrisfix 8 жыл бұрын
Thanks! I try to make it so anyone can do it!
@Shabec2982 10 жыл бұрын
I just changed the brakes on my 2000 altima. This was dummy proof, most helpful step by step video out there. Thank you greatly appreciated.
@chrisfix 10 жыл бұрын
Great! Glad the video was helpful! That was my goal!
@Richphotos1 8 жыл бұрын
The best way to change the rear drums is switch them out to disc brakes. Way more costly though. This is a great walk through.
@Crywolf203 8 жыл бұрын
How? i have an 01 Ford Taurus that i've been dragging my feet on for the longest. I know it has been done onTCCA but i cant find any video showing this conversion. Have you seen one?
@Richphotos1 8 жыл бұрын
I dont know on a ford, sorry! I am a chevy person. Start with this, some helpful info in here. www.automotiveforums.com/t591187-convert_drum_to_disc_.html To find more info search on google "2001 Ford Taurus disc brake conversion"
@pnolans 7 жыл бұрын
I looked into doing that on my 98 Jeep XJ... pretty expensive, and awful lot of work if you're doing it yourself. Easier to just learn how to do drum brakes ... and do it right. Maybe on a Chevy it's not that big of a deal. If so, good for you! :)
@Richphotos1 7 жыл бұрын
I am surprised they do not have a bolt on accessory like that for your jeep, they are known for being the most accessorized vehicles out there, like barbie cars. If you have knowledge on how brake systems work, its pretty simple.
@toddgerlach6343 7 жыл бұрын
Richphotos1
@jaguarke069 8 жыл бұрын
Just wanted to add for all you diyers; if you work on brakes on older cars, wear a breathing mask. Older system may consist of asbestos brake pads.
@chrisfix 8 жыл бұрын
Thanks for the tip!
@and1guy 6 жыл бұрын
I'm very thankful for your video. I've never done drum brakes before and this got me through it! Thank you
@paulcapell5676 7 жыл бұрын
Great video Chris , just finished my drum breaks first time . THANKS for your help.
@peterderby8099 7 жыл бұрын
Now I think I can do drum brakes with confidence. I've done several pads and rotors, but have never attempted drum brakes. Thanks for a great quality video guide.
@chrisfix 7 жыл бұрын
It isnt bad at all! Watch this one which is even better: kzfaq.info/get/bejne/h5uaZtZ8zLTTdac.html
@saconchar 8 жыл бұрын
I m starting the rebuilt on my car, this videos are very helpful. Thanks!! Best regards from Viña del Mar - Chile!!
@Flowaze 8 жыл бұрын
Wonderful video! Very helpful, each and every step was clearly specified in a really simple way, thank you so much for sharing and helping others this way. God bless you!
@chrisfix 8 жыл бұрын
Thanks! Glad the video was helpful!
@mebcool 7 жыл бұрын
Thank you Chris. I found that a large flat screw driver and a steady hand works better (more leverage) than your 3/8" wrench to pull those springs on. You might try this.
@jamessherwood1898 6 жыл бұрын
Thanks for the guide. Used this to do my brothers brakes. It was very helpful. Love this channel.
@ZeeVeeG310 4 жыл бұрын
Great video. I was always paranoid about doing my rear drum brakes but after watching this video I think I’m gonna do it now.
@tmst2199 6 жыл бұрын
Beautiful demonstration of careful, thorough work!
@welostourdemocracy 6 жыл бұрын
Pretty good video ChrisFix. I agree with another viewer...the screw adjustment at the bottom is for self adjustment as the pads wear down not having much to do with the emergency brakes . You have clear instructions not skipping details....good job.
@Muilisxx 8 жыл бұрын
wow, this is actually a really good detailed informative video
@christopherlynn4692 7 жыл бұрын
Your video was very helpful, made my rear brake shoe replacement on my 70 Mach 1 so much easier. Thanks for making this video.
@jorgespartan1978 9 жыл бұрын
excellent videos man, really clear explanations and good quality videos and focused right on the piece you are explaining.
@denverthomas6532 8 жыл бұрын
Nice tutorial. I was impressed by your clear and simple instructions. Very decent camera work too - I liked your overlay transitions! Now I gotta give it a shot m'self.
@chrisfix 8 жыл бұрын
+Denver Thomas Thanks a lot!
@emagee7864 2 жыл бұрын
Great reference video. You have come a long way pilgrim. (Quote from a classic movie). Good work and I gain confidence tackling my repairs after watching your easy to understand videos. Keep up the good work.
@kadebigfoot 3 жыл бұрын
Thank you so much for this video it really helped to simplify the process. This helped me and my friend out a lot replacing my rear drum brakes, my brakes were set up different than yours but it was still very helpful.
@lakeroberts9511 8 жыл бұрын
This was a super helpful video. I cannot thank you enough.........The only thing I think would make it easier is using a flathead screwdriver in place of the wrench on those top 2, final springs.......but you saved me $250 with this video and thought me quite a lot. Thanks so much!!
@amosjohnson6348 2 жыл бұрын
This is by far the best breakdown on drum repair I've seen on KZfaq. Thank you so much. I'm hearing scraping coming from the driver's side back drum and seeing this makes me feel like I can fix it. What would cause a scraping sound when driving?
@chrisfix 2 жыл бұрын
Thanks a lot! The backing plate might be contacting the drum making that noise you are hearing
Gufee.medalin
Рет қаралды 7 МЛН
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,3 МЛН
agro_fermer116
Рет қаралды 1,8 МЛН
Royal Cleaning Detailing
Рет қаралды 797 М.