How to change front wheel bearing on BMW 1 Series E82 [TUTORIAL AUTODOC]

  Рет қаралды 18,677

autodoc.co.uk

autodoc.co.uk

Күн бұрын

How to change front wheel bearing / hub bearing / wheel bearing kit on BMW 1 (E82) 3 Coupe 2007-2013 [TUTORIAL AUTODOC]
Wheel bearing on BMW 1 (E82) Convertible (E88) (03.2008-12.2013) / BMW 1 Hatchback (E81) (09.2006-12.2011) / BMW 1 Hatchback (E87) (03.2003-09.2012) / BMW 3 Saloon (E90) (06.2004-12.2011) / BMW 3 Coupe (E92) (11.2005-12.2013) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and pdf tutorials on BMW E82 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/bm...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Wheel bearing: www.autodoc.co.uk/car-parts/w...
Wheel bearing for BMW E82: www.autodoc.co.uk/car-parts/w...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzfaq.info?s...
0:00 - BMW E82 - wheel bearing / hub bearing / wheel bearing kit : step-by-step replacement tutorial
1:10 - Disconnect the ABS sensor wiring.
3:37 - Remove the control arms.
8:20 - Install the brake disc.
9:50 - Install the fastening bolts.
11:58 - Remove the support from under the arm.
13:40 - Screw in the wheel bolts.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► BMW car repair tutorial - • BMW car repair tutoria...
► BMW 1 (E82) car repair tutorial - • BMW 1 (E82) car repair...
► How to replace rear brake discs on BMW 1 Series E82 - • How to change rear bra...
► How to replace front brake discs on BMW 1 Series E82 - • How to change front br...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved

Пікірлер: 38
@weingibz3
@weingibz3 Жыл бұрын
My son (who is a BMW Master Tech) just did it in 20 minutes, without removing anything beyond the brake calipers and the disk. Super easy job, no need to dismantle the whole suspension...
@autodocuk
@autodocuk Жыл бұрын
We are glad that this video was useful to you!
@pauldunsford5736
@pauldunsford5736 Жыл бұрын
Yeah I didn,t touch calipers just supported hub
@AndreasEUR
@AndreasEUR 3 жыл бұрын
Why on earth does ht take the entire knuckle off?
@kevinrtres
@kevinrtres 3 жыл бұрын
Exactly.....!
@saulhuck8340
@saulhuck8340 2 жыл бұрын
Long-winded way of doing it. I just removed the calliper bracket and disc, then took the four hub bolts out of the hub carrier insitu. I think they are trying to sell more tools. My tool list was: Wheelbrace, 18mm impact socket on ratchet with 6" extender, 6mm hex key, penetrating oil, copper grease, torque wrench. What I also had to use was a big hammer and a cold chisel to get the old hub out of the carrier as the aluminium and steel bond together over time. I wouldn't have liked to try doing that in a vice, the car holds it much steadier.
@autodocuk
@autodocuk 2 жыл бұрын
Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service. AUTODOC
@YamiSama77
@YamiSama77 Жыл бұрын
And try to justify absurd labor cost
@alexey9900
@alexey9900 4 жыл бұрын
Good 👍👍👍
@devinmcgee5265
@devinmcgee5265 3 жыл бұрын
10/10
@ALXG
@ALXG 4 жыл бұрын
Great vids, But he already over tightened these bolts with impact gun before using torque wrench. 7:25
@autodocuk
@autodocuk 4 жыл бұрын
Thank you for your comment! We will definitely take this into account in our new videos. Best Regards, Autodoc team
@AndreasEUR
@AndreasEUR 3 жыл бұрын
If you can listen to it, it barely has any power. So he didn't really overtighten at all. I put my lug nuts back in with impact gun, but I still have to tighten them even more to get correct Nm with a torque wrench.
@Tifon777
@Tifon777 3 жыл бұрын
Also the torque is wrong!, it is 81 lb-ft or 110nm and not 81nm...
@James-yy4vl
@James-yy4vl 3 жыл бұрын
@@AndreasEUR notice the bolts didnt screw in any more when using the torque wrench, therefore they were already overtightened.
@AndreasEUR
@AndreasEUR 3 жыл бұрын
@@James-yy4vl Not necessarily correct.
@pauldunsford5736
@pauldunsford5736 Жыл бұрын
Only good thing about these vids is a overall picture
@autodocuk
@autodocuk Жыл бұрын
Thank you for sharing your opinion with us.
@pauldunsford5736
@pauldunsford5736 Жыл бұрын
What's the tool used for opening up the clamp bolt bracket ?
@suj1945
@suj1945 9 ай бұрын
You talking about the strut spreader tool?
@pauldunsford5736
@pauldunsford5736 8 ай бұрын
@@suj1945 yes mate
@pickelrick6377
@pickelrick6377 3 жыл бұрын
How to jack up the labour cost 101
@autodocuk
@autodocuk 3 жыл бұрын
Please clarify or rephrase your question. AUTODOC
@pickelrick6377
@pickelrick6377 3 жыл бұрын
@@autodocuk you've gone very in depth taking everything apart basically.
@suniltechshine6068
@suniltechshine6068 4 жыл бұрын
High
@rodrigomeca
@rodrigomeca 3 жыл бұрын
I guess he removed everything off because he changed the whole struts
@autodocuk
@autodocuk 3 жыл бұрын
Thank you for sharing your opinion! We will take it into account.
@lukeharding7658
@lukeharding7658 3 жыл бұрын
Absolute rubbish can all be done in situ MASSIVE WASTE OF TIME.
@vp5
@vp5 3 жыл бұрын
Look closely he changed the suspension strut as well
@danmurray991
@danmurray991 4 жыл бұрын
Hahahah I've done them in situ wow 🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️get a life
@davidmannion8581
@davidmannion8581 4 жыл бұрын
How easy was it without taking it all off? Can you get to the hub bolts on the back easy enough?
@mukinfagic69
@mukinfagic69 4 жыл бұрын
Can confirm this, just done it fairly easily with the steering on full lock
@davidmannion8581
@davidmannion8581 3 жыл бұрын
Definitely easily done in situ. Done mine no problem at all. No need to take any arms off
@HBCFloorsanding
@HBCFloorsanding 3 жыл бұрын
I was thinking this looks like too much work would it be possible to get to the bearing bolts with the car jacked up and remove bearing ?
@davidmannion8581
@davidmannion8581 3 жыл бұрын
@@HBCFloorsanding easy get to them with wheel off and turned to side . Seriously don't know why all that was done
How to change Front wheel bearing on BMW 3 E90 TUTORIAL | AUTODOC
11:09
ТАМАЕВ УНИЧТОЖИЛ CLS ВЕНГАЛБИ! Конфликт с Ахмедом?!
25:37
HOW DID HE WIN? 😱
00:33
Topper Guild
Рет қаралды 48 МЛН
KINDNESS ALWAYS COME BACK
00:59
dednahype
Рет қаралды 159 МЛН
How to Replace a Front Wheel Bearing
16:26
ChrisFix
Рет қаралды 9 МЛН
Wheel bearing replacement on site without dismantling the hub carrier
21:04
How to change spark plug on BMW 1 Series E82 [TUTORIAL AUTODOC]
13:27
How To Jack Up A BMW E87/E82 1 Series
10:48
M Tech Guy
Рет қаралды 23 М.
Bad Wheel Bearing Symptoms
5:59
Despair Repair
Рет қаралды 51 М.
How to change front wheel bearings on a BMW F10 (RWD 2010-2016)
13:48
Practical Enthusiast
Рет қаралды 26 М.
Девочка кричит, глядя на дорогу...
0:33
ZİNCİRLEME TIR KAZASI OLACAKTI SON ANDA KURTARDI #truck #shorts
0:18