How to Change the Front Brake Pads on a Honda Rancher 420

No video

How to Change the Front Brake Pads on a Honda Rancher 420 | TRX420 Rancher Brake Pad Change

Рет қаралды 24,244

Күн бұрын

Get tools and replacement brake pads for your Honda Rancher 420 here. You’ll need to order TWO sets of brake pads to replace both the right and the left side. They are the same part number: bit.ly/Honda-Ra...
See how to change the brake pads on a Honda TRX 420 Rancher in this video from Partzilla.com. This is an easy job, and you’ll know it’s time to replace the pads on your Rancher when you notice a little fade in the brakes. As the pads wear, there is less material to dissipate heat, contributing to a loss of stopping power.
John will show you how to remove the tire, get the caliper removed from the unit, and then remove the brake pads. Then, we’ll get some replacement brake pads on our Honda Rancher, get the caliper back in place, and reinstall the wheel. The torque required for the lug nuts on this wheel is 47 foot-pounds.
When you’re done, be sure to pump the brake lever a couple of times to push the brake pads in a bit in the caliper. Otherwise, you might not have much braking the first time you pull the lever.
Check out your Rancher 420 front brake caliper diagram here: www.partzilla....
Read how to do this job step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Removing the wheel - 1:00
Removing the caliper - 1:45
Removing the brake pads - 2:50
Replacing the brake pads - 4:24
Replacing the caliper - 5:10
Replacing the wheel - 6:30
Got a Rancher 420? Bookmark our playlist for more maintenance videos: • 2012 Honda TRX420 Ranc...
Buy Honda ATV parts here: www.partzilla.c...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2012 Honda Rancher TRX420, but you will have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT
Honda Rancher 420 air filter replacement:
• How to Change the Air ...

Пікірлер: 15

@chief1193 Жыл бұрын

Best ATV channel on you tube!

@mhfirefighter1356 3 жыл бұрын

Can’t thank you enough for working on the 2012 420, it has helped me so much! John is awesome and probably the best instructor I have ever seen. Keep up the great work/channel.

@kirbus69 3 жыл бұрын

I would suggest to also put some anti-seize or grease on those guide pins when you re-insert them. The far end of them (the threaded end) is exposed and they will get debris and rust in there, and they can become VERY difficult to remove if they sit like that for years. I have stripped a few of the heads before and if you can't get the pins out, you have to buy a whole new caliper, which is $100-150 each.

@Dennis-cy4wv 3 жыл бұрын

Just want to say. I certainly enjoy your very informative videos. I have learned so much from watching you. I have started ordering my parts from you all. Your parts staff has really gone out of their way to make sure the orders are correct. My parts were also shipped the very next day, which I certainly appreciate. You guys have me as a customer from now on. Thank you.

@PartzillaParts 3 жыл бұрын

Awesome! Thank you!

@jaydancraven1117 3 жыл бұрын

Those pins is what brought me here . Brake line has a pin hole in it decided i would change the pads I already have the caliper off so hopefully those pins don’t give me trouble