Honda Rancher Rear Brake Replacement | Change the Rear Brake Shoes on a Honda 420 Rancher

Рет қаралды 72,878

3 жыл бұрын

Get Honda Rancher 420 rear brake shoes here: bit.ly/Honda-Rancher-420-Rear-...
See how to replace the rear brake shoes on a Honda Rancher 420 in this video from Partzilla.com. While the models are different, this process will be similar across TRX utility models.
This is a more complex job than just replacing the brake pads on your hydraulic brakes. The rear brake drum on the Honda Rancher TRX420 is roughly in the middle of the rear axle, so removing and replacing the brake shoes requires the removal of the wheel and then cracking open the rear brake drum housing.
Because the job is more labor intensive, it makes sense to change the four seals in the assembly if you're opening it up. There is one seal each on the front and back of the drum around the axle, one is an axle dust seal on the housing, and a fourth seal-- an O-ring-- seals the outer housing and brake drum.
In this video, John will guide you through the process. We’ll remove the wheel, and then attack two axle locking nuts that we’ll need to remove in order to slip the housing out over the axle. Then, we’ll open the brake drum and replace the seals and the brake shoes.
As we’re reassembling, it’s important that you correctly torque the axle nuts. John will do this by feel, but if you’re unsure that you’re getting the right torque on these nuts, there are two special tools that can assist you. Check 19:17 in the video to see exactly how these two tools work:
Honda axle nut adapter: www.partzilla.com/product/hon...
Honda axle nut holder wrench: www.partzilla.com/product/hon...
Once that’s done, we’ll adjust the brakes and reinstall the wheel.
See the Rancher 420 rear wheel diagram: www.partzilla.com/catalog/hon...
See the Rancher 420 rear brake diagram: www.partzilla.com/catalog/hon...
Read how to do this job step by step: www.partzilla.com/blog/honda/...
VIDEO HIGHLIGHTS:
Removing the hub - 1:30
Opening the brake housing - 5:00
Removing the brake drum - 6:00
Removing the brake shoes - 9:00
Removing the axle seal - 11:10
Replacing the brake shoes - 12:20
Replacing the outer axle seal - 14:00
Replacing the O-ring - 14:47
Replacing the dust seal - 15:00
Reassembling the brake drum - 16:15
Replacing the hub - 19:46
Adjusting the brakes - 20:40
Replacing the wheel - 22:00
Honda TRX420 front brake pad change: • How to Change the Fron...
Got a Rancher 420? Bookmark our playlist for more maintenance videos: • 2012 Honda TRX420 Ranc...
Buy Honda ATV parts here: www.partzilla.com/parts/search...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2012 Honda Rancher TRX420, but you will have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT
Honda Rancher 420 air filter replacement:
• How to Change the Air ...

Пікірлер: 46

@masonchildress1865 2 ай бұрын

Now i need to see a video about the seal bearing. I grabbed the front on the bearing getting the first seal out.

@wildcatindustries8030 2 жыл бұрын

I have a 2013 I’ve never changed the pads on since it was new, granted they only recently wore out, survived 8,500 miles, I dread tearing into it, it’s been through a lot of mud and water and I can only imagine the rust. Hopefully your video will help, I appreciate the pace, not too fast, not too slow, and gives all the details one needs to know

@kirbus69 3 жыл бұрын

I have a 2008 Rancher, and have used several of your videos to work on my quad. Really appreciate you guys doing these videos, and I have specifically ordered parts from your website instead of Amazon because of them. By the way, any idea when the fuel gauge will be back in stock? I ordered one a year ago and it still hasn't showed up.

@marte1a256 2 жыл бұрын

Those damn pinch bolts are proving tougher than hell for me. Broke two wrenches already. Im about to grind them off

@mhfirefighter1356 3 жыл бұрын

Great video, can’t wait to see the motor rebuild for this unit!!!

@hondaman6918 2 жыл бұрын

Excellent video, thanks for all your great vids! Partzilla is my number one place to get Honda atv parts. Now I can do the repairs myself instead of giving my hard earned money to the “stealership”.

@RangerGrip1 2 жыл бұрын

This video saved me a lot of time and money thanks it’s for the amazing video!!👏🏼💪🏼

@teethofthelamb 2 жыл бұрын

Very helpful, I needed to know how to put the springs on the shoes, I watched you do it and went out and put my brakes back together in about 5 minutes, thanks for the tips. P. S. I fought those springs for about 45 minutes then said to myself….I know there’s a better way (a trick), so I came to you and sure enough you put the springs on first then installed the both shoes at the same time, easy as pie.

@PartzillaParts 2 жыл бұрын

Great job! Glad the little tip help you get it done!

@jasonmcquarters3794 Жыл бұрын

Great video gives me the confidence to go give it a go 👍

@riverking4u Жыл бұрын

Thank you so much!!! You just saved us Hundreds!!!!!

@thekidd2189 3 жыл бұрын

I miss turning wrenches so much ill do it as a intern right about now

@gerardobaldoquin2845 5 ай бұрын

Un maestro mi respetos gracias por la clase 🙏🙏🙏

@heatherboyer3290 2 ай бұрын

great job

@JohnThompson-bm1cr Жыл бұрын

Great videos appreciate info.

@patriciabaker5566 Жыл бұрын

Hi well all I can say it a big thank you for you brilliant videos on doing so many jobs on the honda fourtrax. I've followed you and all I can say is outstanding I've changed the oil in the front axle and doing the rear oil change today and done the engine oil and filter your videos are so helpful and clear. I've 2 questions to ask how do I release the rear break plate as mine seems to be stuck I have slackened the cables off but the plate won't move. And I am going to have to replace the key ignition switch as mine is bad is this quite a simple job or am I going to struggle on it . I'm in Wales UK thank you

@kerm9807 3 жыл бұрын

Do you have any video on a 2016 suzuki ozark 250cc? Great channel

@diegoinsfran1167 5 ай бұрын

Muy bueno excelente gracias

@leeg1584 2 жыл бұрын

On left side , there is a short sleeve. Should that move when everything is put together or be tight?

@Retireded03 2 жыл бұрын

Seen everything on u tube but how the 4 wheel braking system works on a 2010 honda 420 fm rancher?

@Retireded03 2 жыл бұрын

seen everything on u tube but how the 4 wheel braking system works on a 2010 trx 420 fm?

@ericneering6357 2 жыл бұрын

What you showed with the nuts the tightening the 29 pounds and 90 pounds you wouldn’t believe how many people do this project and leave that out thank you working on a 1989 I hope it’s about the same tracks

@stevennewman8276 9 ай бұрын

I managed to move drum about 1/4 inch. Iv sprayed braked cleaner where i could,pentrating oil & my puller arms wont fit in gap yet to pull. Im in that battle u spoke of. Any ideas?

@rawhide3985 Жыл бұрын

So which brake pads do i use in the exploded view. the (ASK) one's or the (JB) one's

@deibysburgos4257 Жыл бұрын

Tengo un atv 420 y se me queda trabado el freno de pie, como puedo solucionarlo y acabo de cambiar las pastillas?

@TheEliteFisherMan Жыл бұрын

I changed everything on my rear brakes on my 350 fourtrax, when I press only the handle brake it makes a single click, but doesn’t do it when I apply the pedal. Anyone have this before? Brakes still work fine

@cazper1976 3 ай бұрын

Como conseguir el diagrama eléctrico de la trx420

@tomasgutierrezrivera2610 3 жыл бұрын

Me gustaria las instruciones en espanör.

@Aquaholic6801 9 ай бұрын

Why wouldn't you replace the cam seal also?

@jcbromine4918 3 жыл бұрын

Would this be the same for a 2007 Rancher 420 4x4

@tylerrusty1122 3 жыл бұрын

It's the same for all the rancher 420s of this generation.

@hunterwynns7384 2 жыл бұрын

I need some help! I’ve replaced the brake shoes, all the seals, and both the brake cables and I still can’t get the brake to grab. I’ve even tightened the wing nuts to the max and still nothing. Any advice?

@ericneering6357 2 жыл бұрын

On the back of the brake caliber that it has an adjustment take the nut off take the break arm and you can move it to different positions to get more travel there’s a great video about how to do this online

@nighthawkj30A4 3 жыл бұрын

I own 04 Accord EXV6 Sedan part of Honda Automotive Division so you can go wrong with any Honda product.

@timreid646 Жыл бұрын

Hey which brake cable goes where , foot pedal line go at the bottom 500fm trx Honda Forman ??

@derick2986 Жыл бұрын

Yep

@figueroafigueroavazquez2142 3 жыл бұрын

Son buenos vídeos pero que malo que sean en inglés no todos entendemos o anulamos el inglés

@AngelineDaniels-qs6vj Жыл бұрын

I wish we can talk

@michaelbackman5929 3 жыл бұрын

What are the seals called so I can order them you didn't tell us what to order to get them

@PartzillaParts 3 жыл бұрын

Here's a link to the complete parts list. In the video, you'll see on the graphics at the bottom which size is which. The different sizes are listed in the parts list so you can match up what you need. www.partzilla.com/search-list?q=08732-CBCCA%0D%0AACC-RACEG-RE-AS%0D%0A2X9F-MAXIMA-73920-N%0D%0A06430-HN0-A30%0D%0A94201-30450%0D%0A91355-hc4-003%0D%0A91351-hb3-004%0D%0A91256-HP5-601%0D%0A91253-hc4-003%0D%0A07916-958020B%0D%0A07916-958010B

@wesrackley9048 2 жыл бұрын

Where can I buy this seal kit?

@PartzillaParts 2 жыл бұрын

These seals all came seperately. We ordered them anticipating that we'd need to replace them,-- and since we were opeing it up anyway. You can see them here: www.partzilla.com/catalog/honda/atv/2012/trx420fpm-2a-rancher/rear-brake-panel

@nighthawkj30A4 3 жыл бұрын

Im buy A Honda Rubicon