I bought one of these Oscillating Tools about a year ago and frankly have never used it (yet). Thanks for this video blog on the use of the various blades that can be used on the tool. I'm a DIY person, but for some strange reason have never used an Oscillating Tool. I'm 82 and have often mentioned to people who know me that if KZfaq had been around when I was a kid, I might have actually amounted to something... Your video is a good one. Thank you.

I watched about a dozen other short vids before finding yours. Yours is THE BEST and now I feel brave enough to use my new tool and tackle a few projects. I just purchased a fixer-upper for my down-sized retirement home and I know your vids will be so helpful! You have a new subscriber! Thank you!

I've been planning to get new blades for my oscillating tool. This video motivates me to pay more attention to the blades I buy. Thank you, Ron Hazelton.

Excellent no-nonsense examples! Thank you!

Hi Ron. This was a great video and it taught me a lot. I see that I have a lot of unexplored potential for my Porter Cable mult tool. I bought it to undercut door jambs for laminate flooring and I have not used it for anything else so this video is a big help to me. Thank you again Professor Ron.

i always doing something in one of my rentals or remodeling a room or kitchen for a family and friends. this tool is among the most useful one of all; it's a must have tool for construction work.

The quality of education in this video is top notch. Thanks

I’m trying to DIY a tv console out of an old hutch and this tool is by far my saving grace for this project!!

Most useful job I’ve found for my oscillating tool was, as an electrician, I find myself occasionally needing to cut into conduits already containing wires and fiber optic cables. One project had me down in a vaults that were set over two existing 4” inner duct conduits that each contained 4 each 1” conduits inside. There were existing fiber optic cables in each 4” inner duct but no way of knowing which 1” conduits they were in. My job was to remove all of the conduits (4” & 1”) inside of the vaults. The oscillating tool was the perfect tool for the job as there was less likelihood of damaging the existing cables inside the conduits and space constraints in the vaults necessitated use of a compact tool able to cut into tight spaces. Did this in multiple locations and never damaged any cables.

So useful! I got this tool for free with my drill and had no idea what it could do. Thanks!

You are the best! I has the knowledge of attending a complete training about Oscillating tool! So simple but meaningful video!

One of the best video I'd seen so far in regards to the multi tool application.

Great demonstration of the various blades. Ideas are now clicking about my somewhat limited thinking area.

Thank you this was helpful to me. I own plenty of cordless tools but this one is new to me. I seen others useing this multi tools on the job sight. And thaught it might come in handy for plumbing. I wanted the milwaukee or dewalt but ended up with a craftsman. Thanks again and God bless

This is a GREAT tool and perfect information given. This saw has got me out of many jams

Useful info, clearly presented, with no silly embellishments. Thanks.

A truly efficient tool, that meets almost any trades man needs. Thanks Ron

3:28 That's a great tip! This video is the best introduction I've seen to using one of these tools. Thanks.

Just what i was looking for as i wasn't sure which blade did what. So thank you for the guidance demonstrations

I had seen this tool as part of Dewalt 3 piece combo, but had not seen it in action, or variety of uses for it! Got the 2 piece yesterday, might go back and get the 3 piece combo. Awesome tool!

Pro Tip: Install the blade on any multitool PERPENDICULAR to the handle of the tool. You have far more control and it makes it easier to rock and slide the blade so you’re not holding the blade in one spot and grinding down a notch into the blade in the one spot. Your blades will last longer and you will make cleaner, more controlled cuts.

One of the most versatile tools you can buy. If your remodeling, you will find dozens of uses for this tool.

Ron, you’ve sold me. Gonna go out and get one tomorrow. Fantastic Video. Hope you are well and take care.

Great informative vid! I will be using my Bosch osc tool a lot more after watching this! Thanks for your effort in putting this vid together!

Very nicely done demo and really educational for the newbies. Thank you.

Thanks. Told me all I needed to know, which is more than the others did

Thank you, very informative. Much better than the marketing clips of the multi-tool manufacturers!

Great tutorial. Thank you. just what I was looking for.

Great video bud, I have a JobMax that I have been using for many months now and this gave me some great tips and pointers on blades and blade use, thanks!

Great video. I’ve been contemplating whether to buy one. Now, I don’t know how I got by without one. So many projects I could have used this on.

Thanks for your video I'm considering going an ocillating cutting tool for remodeling projects.

Nice information. I have one of these tools and did not know it was used for some of these things.. Thank you !

Great video. Never owned one of these before, now I know enough to buy the right saw & blades. Thanks Ron.

Thank you Ron. I will be able to get more from my multi-tool

Brilliant video - I'm ordering a Makita now - Many thanks !

Researching multi tool this video came up. Planned on hitting a big box store this Labor Day weekend to buy one. Learned so much, especially about Zenith blades. Went to their website and found a kit including the saw at a fantastic price. Only had one left. Lucky me Saved me $$$ and a trip to the store. Woo Hoo!

Literally the best video I’ve seen on KZfaq. Thanks Ron!

Thank you for that brilliant explanation!

Belíssima apresentação, muito bem explicado!!! Abraço aqui do Brasil 🇧🇷

Excellent breakdown of a great tool. Thanks for the brief and very helpful video!

Thanks Ron, one of the best tools that I have every purchased. Wish one of the manufacturers would build a blade that would cut a 1/8" width, as it would be great for cutting a slot in door frames so a kerf weather stripping could be installed. I do handyman work and have to replace a lot of the nail on strips which are not as efficient as the kerf ones.

I use these all the time in the course of my job. I had the original Fein many years ago and up until a little while ago l used a Bosch version. I recently purchased the Festool which with all it's fancy attachments cost me over $1400.00 AU. I wouldn't recommend spending that much on one of these unless you rely very heavily on them like I do but if you do the Festool is Amazing! I routinely cut portions of cabinetry away to retro fit dishwashers in kitchens that aren't designed for them. The festool performs at least as fast as a quality jigsaw and is much less likely to burn. It performs at least twice as fast as the other two machines.

Very informative video. As a new oscillating tool owner, this is a big help and will help me get started with the right blade.

I first used this tool this year. It’s an absolute must! I used my brother’s saw and hope to get one from Santa!

1.6 million views?! Hope this guy knows how much we appreciate this video!!!

TQ.it helps me understand better and more of its wider application hitherto I don't realise .Gainful video clip.thank you so much Ron .I bought it but have kept it unused for so long as I dont know of its potential.use 👍👍❤❤

Hey Ron, superbly presented, well worth my time.

Great show, like Bob Vella! I love learning about great tips for DIY!!

I am dismantling an expensive entertainment cabinet to then reconfigure it for different use. This will be a life saver. Thanks

Precisely what I needed to see. Thank you so much!

This is very helpful...I have just learnt that I have struggled through a job with the wrong blades ...live and learn

best 5 minute video i have seen in a while. thank you so much

Ive have just completed a three year remodelling of my old house, and i can say that an oscillating saw is, in my case, a tool you only need two to three times a year, but oh boy do they safe time and effort when you need it.

Thanks so much! I just spent over $100 on blades, but it is well worth it for the ease and convenience the saw provides.

The hook blades made for box cutters (stanley knifes UK) will fit in most multi-tools and are great for cutting carpet, and theyre cheap too.

Me quede sin palabras!!! Tengo una herramienta de esas y sabia que se le pueden poner atacments, pero no sabia de su tan grande versatilidad. He pasado muuuchos trabajos haciendo cosas que con eso hubiera sido super facil!!!

Excellent, informative and to the point. Many thanks.

My new favorite tool! BTW played your wedding at the Plaza.

Don't watch TV anymore, does Ron still has the how to shows? Learn a lot from him and others over the years. I have been using multi tools for years, have 4 of those in fact. My favorite is the cordless 18V Milwaukee, plenty of power and will last long time on a single charge. Been using the Japanese style for cutting wood but kinda expensive at $10 a pop. Since then I've switched carbide tip for wood and wood with nail. Twice as much as the Japanese teeth, cuts slower but lasted 20 times longer!

Great presentation. Succinct but packed with important information. I learned a lot.

Well done sir. Just what I was looking for.

gracias por la información!

Oh... big up... exactly the tips I needed

A nice comprehensive guide for oscillating newbies

Thanks, just what I needed

Sir, outstanding presentation. Thank you, very useful.

very educational video thank you sir

Great demonstration of the blade uses. Cheers Tim from wood 4 nothing

VERY helpful intro. Makes me want to get to work! 🎉

Thank you for your information

Thanks, this was helpful!

The multitool is an awesome addition to the tool box, once you have one, you wonder how you lived without.

The New Diablo OMT Blades are the best on the market. They've finally figured it out and I highly recommend them over anything on the market. They've got both Starlock and Universal fit and have come out with a line of Carbide OMT blades.

A spectacularly informative video, peppered with tasty mandolin and harmonica noodlings.

Really informative video. Thanks!

Excellent demonstration

ohh man keep going there are many other tips and variations not least mounting systems.. anyway very informative video. great work..

Thanks ! Great video Ron.

Thank you! Useful information and clear explanation!

Thanks, by Rio de Janeiro, Brasil.

i use these all the time, highly recommended

THANKS FOR THIS!!!

Thanks for the information. I never heard of this manufacturer. I'll try to find them where I live.

I have the Ryobi One+ multi tool. I have mostly used it for undercutting door jambs when installing flooring. Recently I discovered the same blade was perfect when I had to cut a 1/4” bolt that was securing an upper kitchen cabinet to the wall. It fit into the tiny 1/8” slit and cut the bolt like it was butter! I had to purchase a new blade because the old one was so dull. Leah, of See Jane Drill, showed how to easily sharpen those points with files.

Great! Thank you!

Thanks Ron!! ❤

Excellent I didn’t know about the 3degree arc

Encore! Fantastic video

I just received my 1st oscillating tool, Milwaukee fuel M18 kit. I also purchased the Hemunc Oscillating tool scraper blades set, include oscillating rigid scraper blade 10pcs, flexible multitool scraper blades 2pcs. Which blade does what? There’s flexible and which is a straight blade and rigid blades that are bent. I need to remove 3 layers of vinyl squares (floor). Great video. Thank

Thanks these have been a mystery

Thank you Ron. 👍

This was an excellent video! Have you used it to say, for example, make a scallop on a pergola board? That's what I was hoping to use it for. What do you think?

WOW..Ron is still around!!!

Thank you much

Fantastic video!!! Very informative!

informative article thank you

Ron, Oh my gosh, I think this might be the answer to my problem. I have "luxury vinyl plank tile" that you're supposed to be able to score and snap. Well, it's not that easy! Plus when trying to cut to fit around the toilet flange and air register, heck even the straight cuts, was a no go. I need something that'll cut well through this type of material. I'm sprucing up a bathroom for an 86 year old that lives with me & I take care of. I removed the toilet this morning and was hoping the process would've gone quicker today. It didn't I barely have 2 tiles down. It took me more time to work on those 2 tiles than it did to remove moldings, prep the floor & remove the toilet. All that to ask, will this tool do the job I need? The room is 5x5. Thank you SO much if you take the time to answer this question!

Thank you a really helpful video

I just bought a Ryobi Oscillating tool (P343VN) and I was wondering if it matters which way you put the blade on? I see it in different positions where it is either closer to the tool or father away by flipping it either way. It seems to fit either way.

At 2:30, I could have used one of these blades for cutting through some rusted closet flange bolts when I had to remove my toilet to put in a new floor. I love my oscillating tool, but wish I would have purchased a cordless. Thank for the video.