This is just a basic discussion an introduction to the most common types of blades you'll run into for oscillating tools . .
Пікірлер: 122
@timothystevenhoward5 ай бұрын
who knew? I just found out about Fein today, 2023. It's something we never had and now since the patents have expired we get these tools in the USA now. how I would have loved one of these back in the 1990s and 2000s
@billcuningham5862 ай бұрын
Had a carpenter building a deck for me and he had a Milwaukee M18. Had never seen one before and was amazed at how useful it was for him doing a variety of tasks (like trimming screws poking out, sanding, refining cutouts for the posts, etc.) Pretty big, so I looked at the M12 and its' smaller diameter fits better in my hand and great for a variety of tasks, cutting buried PVC pipe/fittings in my irrigation system that needs replacing, scraping off old paint, etc. The drive system is tight and has held up for about 3 years now.
@TestSpaceMonkey4 жыл бұрын
This kind of tool is a real life saver because it can get into angles/places you really can't deal with any other way. I agree with your point on plastics in particular: it really eliminates the temptation to do ill-adivsed/impatient things with utility blades.
@johngoodall70974 жыл бұрын
I have a Worx Multi tool and have found that the scraper blades are quite useful to remove bark when carving, but also when sawing plunge cuts and other types of cuts it helps to assist the cutting by moving the blade back and forth as this assist in the cut, but I expect you already knew that, however others may not. Good review as there are more blades than I was aware of, so thank you for the update.
@MisterBigDave3 жыл бұрын
I have the Makita a few years now, it’s a beast. My other favorite for lighter work is the Craftsman. Both have their place for me.
@robins2622 жыл бұрын
I have a large collection of Ryobi tools and have found them very satisfactory as a hobbyist. Their version of this tool is extremely useful
@seanc64683 жыл бұрын
I just bought mine for my household remodeling. Used it and loved
@CatusMaximus3 жыл бұрын
That is awesome!
@markrhule9432 жыл бұрын
It.....
@hardlyb4 жыл бұрын
When I was a kid my dad, a doctor, had an oscillating tool that he used, among other things, for removing plaster casts. They often show those things on TV claiming it is a 'bone saw' and acting as if the blade spins rather than oscillates. It's not as if you couldn't hurt someone with it, but it's not like waving around a circular saw that's running.
@ernestwalden38943 жыл бұрын
Mine is a craftsman. I know it's not professional for carpentry but as a plumber my craftsman does what I need it for. All new to me glad you explained the blades to me. As a plumber I sometimes have to cut mortor joints wood and Tyle and sometimes copper and pvc.
@DanielPaprocki Жыл бұрын
Packed with knowledge. I love it! 😊👍🏻
@WillB-jo3qz3 жыл бұрын
Dahut- There are 2 different OMT blade designs. 1) Starlock 2) Universal Fit. I would highly recommend that you check out the new Diablo OMT blades. They came out with a line of Bi-metal and Carbide in both Starlock and Universal and they rock. Just like everything Diablo does in Power Tool Accessories, they finally have made a blade that lasts like they should and I'm not paying out the nose for tons of blades for my tool.
@carterscustomrods3 жыл бұрын
I love the Makita corded version (and the old HF Chicago Electric one was also a beast!!!). But I'm now stuck onto the the Dewalts XR cordless ( DCS356 ). It's truly spoiled me.
@CaseyRoseAlwaysPositive3 жыл бұрын
Very Informative !! Thank you !!
@doitbyyourself663 жыл бұрын
Thanks for the informative vid.. What is the use of the cut guide block ? Thanks
@StoneSoupVideos Жыл бұрын
Great info and super helpful, appreciate it much.
@graciescott33342 жыл бұрын
Great video. Thank you!
@truckerpeterose4 жыл бұрын
I have the Milwaukee m12 version and although it eats up batteries, I really only use it for small quick tasks.
@brianbelchuk96123 жыл бұрын
I just bought 1
@zinnakatt83123 жыл бұрын
I converted my battery tools so they can be plugged into wall current. Can't stand cordless tools, too unreliable, will never buy one again.
@yorselrus19962 жыл бұрын
I also have the m12 fuel, seams to work better than the m18. I bought several 6 amp batteries were on sale 2 for $99
@portrait10013 жыл бұрын
I need to cut up lose under my cabinets maybe 4" high to remove layered flooring. Will this tool operate with that little bit of hight
@meangreen73894 жыл бұрын
Very informative and since I’m about purchase an oscillating tool, very useful vid. I’ll also be purchasing a hand grinder and will review your channel to see if you’ve done a review on those. Thank you.
@floobertuber4 жыл бұрын
Do yourself a HUGE favor, and select one that has a "quick release" blade attachment point. The biggest pain with these things is having to mess around with an allen wrench to mount the blade-retention screw in the middle of the driving shaft, while your blade and any other loose parts flop around and refuse to remain where they belong until you can get that damned screw tightened.
@Ariranhaa3 жыл бұрын
@@floobertuber If it's the same price, yeah, get the quick release one. If it's like 10% more expensive, I'd go with the allen one. Not that big of a deal... Where I live, the Makita quick release is 80% more expensive than the older allen model. It was a no brainer no choose: allen all the way...
@EricWaterTruck2 жыл бұрын
These tools are awesome. Make quick work of odd jobs that pop up every now and then. Like cutting through a broken copper pipe under the sink without hitting everything else in the way. I would of got one years ago.
@dougharlow60372 жыл бұрын
I just received my 1st oscillating tool, Milwaukee fuel M18 kit. I also purchased the Hemunc Oscillating tool scraper blades set, include oscillating rigid scraper blade 10pcs, flexible multitool scraper blades 2pcs. Which blade does what? There’s flexible and which is a straight blade and rigid blades that are bent. I need to remove 3 layers of vinyl squares (floor). Great video. Thanks
@summerwind45908 ай бұрын
I love it for cutting drywall and nails in wood during small demolition projects
@nirhawk3 жыл бұрын
Is better to use the bi metal or the other one for wood only to cut the plastic?
@md.rezaulislam17682 жыл бұрын
Hi thanks for sharing the useful video clip. Can we use it as a grinder?
@craigyarmulasr18454 жыл бұрын
Great information. Glad I found your channel. Stay safe my Friend
@CatusMaximus4 жыл бұрын
Welcome aboard!
@harveysmith1004 жыл бұрын
I have owned my Fein for over 20 years. One of the best power tools I ever bought.
@bryanm52333 жыл бұрын
I had my Fein for about 10 years, it’s still great.
@GunnyArtG2 жыл бұрын
I need to cut a veneered antique and need a clean kerf. Which blade design will give the best clean cut?
@samrowe28892 жыл бұрын
I have one of these and keep buying blades for it but i dont know what to do with it and it shud come in handy because im doing a huge hoke remodel plumbing drywall the whole 10 yards but i keep using other tools to do what some people say the osilating tool will
@toolrestoration3 жыл бұрын
These are amazing tools, glad sd one one invented these!!
@vrglcom10 ай бұрын
Can you cut laminate 38mm worktop? I need to cut about 10mm at the end but the worktop is already fitted and can’t remove now. I don’t want to chip and blow the edge. Would this work? I have a circular saw but it’s too big for the edge I need to cut and do have enough room for it
@uriel-heavensguardian89492 жыл бұрын
Thanks for the video
@markharrisllb3 жыл бұрын
It’s not a tool I use a lot but when I need it I’m glad I have it.
@jaimedpcaus12 жыл бұрын
Hi, Which blade could I use to cut tile? Thanks
@billlee17244 жыл бұрын
Happy 13,000 subscribers!!!!!
@CatusMaximus4 жыл бұрын
Thanks
@stip91702 жыл бұрын
Hi, Why didnt you like the DeWalt? Just bought one and until now still happy with it
@gary7vn Жыл бұрын
I just got a Makita for a shower reno because I could not imagine doing one without it.
@maddevil1964Ай бұрын
The small gold coloured one you described as a sander for ceramics, where can you get them and what are they called?
@MsCamelot108 ай бұрын
Which is best blade to cut copper pipe?
@sfoster9179 Жыл бұрын
The Recalcitrant Gaskets, oh yes, I remember them - very big in the sixties.
@donfrank44292 жыл бұрын
great info
@CatusMaximus2 жыл бұрын
Glad you think so!
@rogertyler32372 жыл бұрын
I Have A Gold Rockwell Rasping Blade I'm Thinking About Using Mine To Cut Out Some Guitar Picks
@ryancabanas3 жыл бұрын
Hi! Thanks for the video! Do you know where I can get one of the grit wheels you show in the video at the 5:00 mark that would fit a Dremel Multi-Max MM50? I saw a video where an oscillating tool was using a wheel like this to safely cut out concrete mortar between stones and I'm trying to find something like that for my oscillating tool to use for that purpose. Thank you!
@user-cm8ex2oi6q Жыл бұрын
Does it work with concrete blocks?
@rogertyler32373 жыл бұрын
Yah I bought me One of the Ryobi Ossilating Tools. & it works great.
@gaetanoarnone12 жыл бұрын
Thanks for the video,,the plastic example could have been done with a coping saw much easier and quieter
@HWPcville Жыл бұрын
I have an idea for an oscillating drywall cutting blade (unless one exists already). When cutting drywall there could be times when there's fiberglass insulation with paper backing that I don't want to cut (or electric wires/pipes/etc) on the back side. A blade that will only cut 1/2 deep would be great. The blade could have a guard welded on top that prevents it from going any deeper than the distance from the teeth to the guard. Does this type blade exist? If not feel free to pitch it to blade manufacturers.
@RobertPerk1 Жыл бұрын
both fein and dewalt offer a depth stop to prevent overcutting for their multitools, you can also just wrap painters tape around blade at depth to stop the cut.
@ohitsustu1835 Жыл бұрын
Is there a blade that cuts hardwall plaster?
@byronwooten50923 жыл бұрын
Which blade works best on plastic and acrylic?
@360psyco3 жыл бұрын
Not the one used in the video obviously
@osmanosman92262 жыл бұрын
Need help.my machine has no speed control mechanism to regulate .and the switch is not smooth to on-off .vibration is so strong that I scare of safety to use.made in china. Have never use since day one.pls help .what is yr advice
@JoshKilen2 жыл бұрын
i do know these tools are great for cutting the tread on tires.
@diazaa3 ай бұрын
I wish I could find a short cylindrical rasp or round file type blade!
@upsidedowndog12564 жыл бұрын
These must have been inspired by the saws used to cut casts off of healed broken bones.
@harveysmith1004 жыл бұрын
I think Fein produced the first cat cutters
@Ariranhaa3 жыл бұрын
They were!
@jameslipke354 Жыл бұрын
Yes, indeed. As an MA for orthopaedic surgeons, I have removed my fair share of fiberglass short arm casts, long arm casts, etc. using an oscillating tool. ~ APRIL LIPKE
@keykey14012 жыл бұрын
Is it strong enough to cut agate and Quartz stone with it? Agate hardness is 7 and 7,5
@CatusMaximus2 жыл бұрын
Oscillating tool carbide grit blades are for small cuts like removing grout from between tile or doing small cuts and tiles to fit them in Awkward places. You would use a diamond wheel on a grinder if you're gonna do lots of cutting in hard materials.
@keykey14012 жыл бұрын
@@CatusMaximus thanks dude 👍🏻
@taimoor7223 жыл бұрын
is bosce a dominating brand in this the reason I am asking is that I am thinking to sell this on amazon and if the majority are brand cautions then I can drop this idea of selling these blades need your feedback on that
@sksks653 жыл бұрын
Where I can get in India
@chaddmello74653 жыл бұрын
How about grinding / planing wood? Is there a blade for that?
@CatusMaximus3 жыл бұрын
Probably a carbide grit blade because they are so aggressive but planing of wood is not what you would want to use an oscillating tool for you would want to actually use a planer or maybe a belt sander
@stevenphillips8632 жыл бұрын
Is that an electric bong?
@kerryfoster13 жыл бұрын
Now what I want is an oscillating tool adapter to take my super sharp chisels. Now what a tool that would be!
@360psyco3 жыл бұрын
You could grind the blade down to chisel size
@richardljohnson97272 жыл бұрын
Are there blades for cutting-cinder block
@CatusMaximus2 жыл бұрын
Yes you can use the carbide grit ones
@justinw17652 жыл бұрын
They also have diamond coated blades. Diamond is harder than carbide, probably will last longer. They use diamond coated blades on skill/circular saws to cut through things like thick granite.
@BroddeB3 жыл бұрын
There are also models with quick release. So you have no excuse for using the wrong blade for the job
@CatusMaximus3 жыл бұрын
I have a list of excuses prepared for all situations... :)
@tuc11133 жыл бұрын
@@CatusMaximus Lol! Sounds like a lot of us.
@longhairmullet4 жыл бұрын
You should provide a link to purchase.
@jpro112185 Жыл бұрын
Maybe I'm missing something here or I'm late to the party but why aren't there any pointed triangular blades or arrow head shaped blades? It would seem to me that this would make plunge cuts much easier, faster and more accurate. I'm looking but cannot find anything. If you end up finding any or know of any existing for plunge cuts just ignore me. But if you decide to run with this idea and make a ton of money please include me 😁🙏. Another idea is having teeth on the sides maybe? Maybe that would create more resistance idk but I'm thinking and it seems like the shapes of these are where the money's yet to be found. You could make c blades with teeth on the inside?!?! Just some random ideas. Also, re sharpening these must be a big market yet to be tapped. Or tapped effectively. Cutting sidewall staples can be a huge pain and idk of the make longer blades for that. Or if the vibrations at that length would be rendered ineffective.?? Again just throwing around some ideas because that's how my brain works and I love thinking and creating new ideas and inventing things. If somehow the blade could slide to the reinforced area of the blade when hitting a nail. This could limit the damage to the blade and increase longevity as well as cut down on anxiety and worry when hitting nails. I'm sure you could incorporate a type of advanced stud finding technology into the multi tool head and help with this issue. I wonder if they will ever make a much stronger and larger tool that supports larger blades and shaped like rectangle boxes for cutting out electrical boxes quickly and efficiently. As well as other circular blades for ceiling lights. Drills work but this could prove much easier, cleaner, more convenient. Anyways I'm done blabbing. If I helped someone I'm glad if not than sorry for wasting your time. Take care and sorry I chose your ch to post this. Just happened to be on my fifth video looking for my ideas and haven't seen anything quite like what I have mentioned. I'm always late with my ideas anyways but I hope one day to work designing tools and such. I have so many ideas in my head and every once and awhile I can't help but post them, looking for that similar mindset to talk to.
@winstonsizemore7790 Жыл бұрын
We are the pioneers and the first generation of the problems we turn to the internet over and don't get answered..diamond coated chainsaws are 5 grand and that's a Stihl or Husqvarna I want to learn what diamond powder (mixed with wiat metal shavings ) I need to buy to coat on all of my blades, what tools can handle them to cut and shape tomb stones, glas statues marble , emergency entrance blades..any simple do-able run throughs on here u hear of or affordable " saw the f thru anything blades /tools lemme know I'm gonna start flipping the best blades I can find after I electroplate or weld braze coat them and sell them and their powerful tool counterparts for a fraction of the price on here I'm gonna have to be the one who does the videos I can't seem to find and I'm devoting my life to makinh the demolition equipment affordable to the common man I have a welder a plasma cutter , m18 tools Makita 40 and 18 volt just no good blades yet and I'm tryna do some experimenting any knowledge would be appreciated for real I have just about every tool and I'm gonna build statues and everything maybe even houses or machinery with motors involving flight someday
@mikey386323 жыл бұрын
0:56 Someone at Makita's legal department almost has a heart attack.
@dehartfamily30912 жыл бұрын
I thought he was gonna start the medical disassembly.
@gary7vn Жыл бұрын
+10 internets for using the word "recatricent" in a tool video!
@jonwilliams56133 жыл бұрын
My Bosch multi tool arrived last night , it is still unopened, would y-u recommend I send it back, and get a refund, I anticipate DIY usage,
@CatusMaximus3 жыл бұрын
it will probably be okay, but if you want one that will last years I recommend the Makita it is much better (a bit heavier as wel).
@Ariranhaa3 жыл бұрын
@@CatusMaximus I have a Makita (older model) and it's pretty neat, but my father has some Bosch equipment (drillers) for more than a decade and they're still pretty solid too.
@TheLexiconDevils4 жыл бұрын
Remember when these were all over TV. Same as twin blade circular saws
@b.real11933 жыл бұрын
When do you put electrical boxes in wood lol
@tomvana42702 жыл бұрын
More often than you think.
@jerichojoe3072 жыл бұрын
Cordless is great, and I love Makita but I've been using a corded Dremel multi-max for over three years without an issue. There are aftermarket companies that make every blade available that will fit the Dremel and the ones that don't it's a simple fix with a stainless steel c-clip adapter. Never had one come loose. So the drive system issue with dremel isn't really a thing unless you're buying name-brand blades and I found some aftermarkets that actually outperformed some of the name brands🤷♂️🤷♂️ I'm one of those run it till it doesn't function kinda guys and my multi-max still runs strong. Take care of your tools and they'll take care of you.
@appleztooranges3 жыл бұрын
Trying one out from Harbour freight for $19.99 lol
@robwagner75453 жыл бұрын
How did you like it?
@appleztooranges3 жыл бұрын
@@robwagner7545 didn’t work for me unfortunately
@360psyco3 жыл бұрын
But not surprisingly
@tabithaann62383 жыл бұрын
I see a cat. I subscribe. I also like the video I just purchased a dewalt power tool set for my husband. He said I can have the oscillating multi tool for my crafts and things lol so here I am.
@CatusMaximus3 жыл бұрын
Thanks for the sub!
@Z-Ack2 жыл бұрын
Damn that one is quiet as hell.. i got a cheap cheap chicago electric piece of junk.. thing is louder than a circular saw.. dunno why but was only 10$.. lol
@xkidmidnightx2 жыл бұрын
No way am I doing that in my hand
@Xabsolem3 жыл бұрын
I was looking for an actual usage and intro to things. But okay. More talkies.
@akbychoice3 жыл бұрын
Took less than 5 minutes to completely remove a tire tread from the sidewalls for a project.
@360psyco3 жыл бұрын
Fallout raider armor?
@akbychoice3 жыл бұрын
@@360psyco bungy cords
@360psyco3 жыл бұрын
Now I'm interested. What is the project?
@anotherbutt4chair562 жыл бұрын
Takes a little bit of getting used to? Using your hand as a vice? No thanks
@kennedymcgovern54132 жыл бұрын
Yeah, he's right. My DeWalt XR multi tool is a piece of junk. That old Fred Flintstone Makita he is rocking...now that's quality. What time do you have to feed the bird that powers that relic, bro?
@carterscustomrods3 жыл бұрын
Why do all the blades suuuuck???
@marcelotorterolo495010 ай бұрын
Tras late video On iPad
@geo555 Жыл бұрын
How much are you getting paid?
@crtriyambakaraj47546 ай бұрын
Not mindful of sfety precautions, No eye protection, cutting hard plastic without anchoring on the table and holding it in one's hand is not a safe practice.
@124adams3 жыл бұрын
I can see why you only have 820 T-ups in 10 months, you're not telling us anything we can't surmise from reading or just looking at the package.
@nowirehangers28152 жыл бұрын
Helped me
@donaldespeut20423 жыл бұрын
Rubbish review.
@johnjingleheimersmith92593 жыл бұрын
Rubbish comment. And commentator.
@gregkosinski23032 жыл бұрын
@@johnjingleheimersmith9259 rubbish response and responder.