How to Drill Perfect Holes in Carbon Fiber Every Time

Рет қаралды 25,240

Күн бұрын

I teach how to consistently drill perfect holes in carbon fiber
Support Sasquatch Composites on Patreon: www.patreon.com/sasquatchcomposites
My Beginner's Guide to Composites: • Beginner's Guide to Co...
Learn how to make money with your own carbon fiber product: • Making $$ with Carbon ...
List of materials used in this video:
Solid Carbide Tapered Drill Reamers: www.panamericantool.com/carbi...
Solid Carbide Spade Bits: www.panamericantool.com/carbi...
Drill Bushings: www.grainger.com/search/machi...

Пікірлер: 36

@IrreverentSOB 11 ай бұрын

Excellent video, very useful ! Thank you !

@rodia_the_smg_guy5575 2 жыл бұрын

A quick guide on composite materials for beginners would be great

@michaelmoncada6510 Ай бұрын

yes this was very helpful!

@mwinner101 2 жыл бұрын

Thanks for the video. Great info.

@SasquatchComposites 2 жыл бұрын

Glad it was helpful!

@axelanzueta2462 2 жыл бұрын

Great 🔥

@brynybach7741 Жыл бұрын

Excellent advice on what is a new in use material for me. Thank you very much. I have some small dentist type diamond drill bits, do you know if these would these be of any good use in drilling carbon fibre? Many thanks 👍

@davidduncan5175 2 жыл бұрын

You should do a video on building a hand gaurd out of stock tubing using a commercial barrel nut. There is only one and it's not very good. Aero has a barrel nut that I think would be perfect.

@TOM-wb2tk 2 жыл бұрын

cool guy

@TimStJohn-xp8rv 8 күн бұрын

Is it possible to drill a hole in a carbon fiber flag pole in order to have a screw through it for mounting? Will the carbon hold up?

@dejayrezme8617 2 жыл бұрын

Thanks! How about a good setup to quickly sharpen your HSS drill bits? I imagine that would be cheaper but more hassle. I figure even for carbide you need to sharpen eventually. And probably need a diamond wheel or something.

@SasquatchComposites 2 жыл бұрын

I know that people do sharpen HSS bits, but I've honestly never done it. The idea of having to sharpen my drill bit after every 1-2 holes sounds exhausting, so I really doubt I ever will. But maybe I'm wrong. Maybe the process is much quicker than I thought.

@davidcooke2737 2 жыл бұрын

Great video, very helpful. Can I ask do you use a slow or fast drill speed when drilling carbon fibre?

@SasquatchComposites 2 жыл бұрын

According to Panamerica Tool (where I ordered my drill bits), the ideal speed is 3000 to 5000 RPM.

@dcbrl7553 Жыл бұрын

Can you share links to the tapered drill reamers you have? 0:58

@future_phonk Жыл бұрын

Would these be recommended for Kevlar as well?

@blueskull6061 9 ай бұрын

Hello, I got a 2500 hundred dollar carbon fiber Hood. I got to drill holes that at about 5/8 of an inch wide for the hood pins. I bought a 5/8 diamond hole saw bit. Any suggestions?

@tkostang 2 жыл бұрын

I’m needing to drill in 5mm and 4mm 3K Toray CF. It’s for my 1/7 high speed RC. I not only need tp drill a dozen holes for M2.5 and M3 hardware, I need to countersink as well. Any suggestions? Thanks for posting this video. I don’t want to ruin my CF chassis or at least have a bunch of holes that blew out on the other side.

@SasquatchComposites 2 жыл бұрын

Any carbide countersink should do fine. You can use a high speed steel countersink, too, but it will likely be very dull by the time you get to your last holes. They make countersinks with depth stops that won't let you punch all the way through. Best of luck :)

@rafeekshaker 9 ай бұрын

Thanks. That is very helpful. But, it is possible to add threads (for bolt) into Carbon fiber body. I have 1/2" thick carbon fiber sailboat mast which i need to connect a breaket to, via bolts. Or, is it better to connect via rivets. Many thanks

@scottthroop6208 3 ай бұрын

Probably too late for this, but I would suggest using rivet nuts. They work similar to pop rivets but it leaves you with a metal threaded hole. Use the aluminum versions vs steel to avoid potentially stress cracking the mast.

@shashankjadav3241 3 ай бұрын

what is the thickness of this carbon fibre?

@gnielse 2 жыл бұрын

Any thoughts on diamond ceramic type bits?

@SasquatchComposites 2 жыл бұрын

I've used diamond ceramic hole saws for making large holes over 1" in diameter, and I've seen diamond ceramic rotary bits, and they work great. But I haven't seen a drill bit with diamond ceramic.

@DBR9009 10 ай бұрын

I would recommend using a drill press

@ajhartmanaero 2 жыл бұрын

I usually just run a reamer bit through my parts and then a quick hit with a countersunk bit to clean up any burrs. I like the water trick tho. I'll see if that makes a difference on any of my stuff.

@SasquatchComposites 2 жыл бұрын

There's also a water-based lubricant designed specifically for drilling in composites without contaminating the surface for future bonding. Can't remember the name of it, but it's a light blue and has the consistency of Working Hands moisturizer. It replaces the function of the water here.

@ajhartmanaero 2 жыл бұрын

@@SasquatchComposites interesting. I'll try and look for it. I'm always looking for stuff to make my life easier and parts quicker.

@SasquatchComposites 2 жыл бұрын

@@ajhartmanaero I found it. It's called "Boelube", I think because it was developed by Boeing. I've used this stuff in aerospace shops for drilling carbon laminates and it's good stuff. Not cheap, though. www.aircraftspruce.com/catalog/cspages/boelube4.php

@snower13 2 жыл бұрын

How do I find a spade bit without getting search results for the wood spade bits?

@snower13 2 жыл бұрын

'Straight Flute Spade Drill' gets me close but nothing as 'pointy' as yours.

@SasquatchComposites 2 жыл бұрын

I linked to the ones I'm using in the description. Hope that helps!

@nonamebleach 4 ай бұрын

Do I need this to drill through wood that is skinned with carbon fibre and Kevlar? There is one layer of each on either side of the wood and the epoxy of course.

@dieselphiend Жыл бұрын

These tapered reamers are so hard to find in 9/64's.

@ehudkirsh766 11 ай бұрын

That's 10 minutes of explaining nothing in too many words and doing nothing. Please make a video of less than 1 minute of you just drilling holes in carbon fiber, thank you.