How to fit Meta Reverse Parking Sensors

Рет қаралды 45,049

Күн бұрын

How to fit Meta Reverse Parking Sensors
Lets take matters into our own hands and fit some reverse parking sensors!
Amazon has a selection of these reverse parking frames:
USA amzn.to/2saCxC8
UK amzn.to/2reo7RW
Come chat with me on discord / discord
See my recommendations on Amazon: www.amazon.co.uk/shop/backoff...
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!

Пікірлер: 17

@djhatstand7312 4 жыл бұрын

Not sure why you drilled a hole through the back panel when you had a pre-existing grommet close by that you could have used It's good practice to use a grommet whenever you pass wires through metal as it stops them chaffing and shorting to ground

@v4nno Ай бұрын

Tip, when you’ve drilled your hole, don’t check for sharp bits and shards with your fingers like you did 😂

@backofficeshow Ай бұрын

They are close and thick from all the checking I do, but I agree, not a job for un seasoned fingers! 😂

@azizyilmaz8888 6 жыл бұрын

good job thanks

@backofficeshow 6 жыл бұрын

aziz yilmaz thank you

@povvercrazy 7 жыл бұрын

I used those crappy blocks when I did mine, might go back and solder them now I have one of those cool usb solder irons :)

@backofficeshow 7 жыл бұрын

+Brian Jones That bit of solder will give you better piece of mind for sure 😂

@povvercrazy 7 жыл бұрын

The Backoffice it's deffo the best method, I fitted a tow bar and electrics at the same time and their playing up so will redo the lot, think the reason I didn't partly was my Citroen has numbered wires so wasn't too sure of what was what

@backofficeshow 7 жыл бұрын

Its annoying when tow bar stuff goes haywire, especially if its been pre-fitted into a second hand vehicle. I have seen some real horrors!

@pjshots 7 жыл бұрын

make it look effortless mate thanks.

@backofficeshow 7 жыл бұрын

+Phillip Ireland Comes from years of pain and suffering 😂

@pjshots 7 жыл бұрын

The Backoffice I hear ya.

@MarcelOoms 7 жыл бұрын

Do they work ok?

@backofficeshow 7 жыл бұрын

+Marcel Ooms Yeah pretty good, I was sceptical Because this unit only had two sensors, but if you appreciate the limitations (limited side view), they work pretty well. Definitely better than no sensors! 😁

@MarcelOoms 7 жыл бұрын

Hmmm, I drive a giant Renault Grand Espace, and take some pride in reverse parking it without sensors. I'm so vain... :-) But really, these are worth considering!.

@backofficeshow 7 жыл бұрын

+Marcel Ooms Flat back vehicles are pretty easy to park. I love those minivan style vehicles. I have / had a c8, basically a van. A more recent vehicle I have acquired would be impossible to park owing to poor visibility. Swings and roundabouts 😂