How to fix parking sensors - when the WD40 trick doesnt work

Рет қаралды 96,361

2 жыл бұрын

PLEASE 🙏! Like 👍 & Subscribe🔔!
Check up my latest video - build a wood billboard for kids artwork display! • Build your own wooden ...
When the WD40 trick doesnt work, you might have a bad sensor
In that case, that's the way to fix it. No garage and no bump disassemble!
DIY - Do It Yourself
Does this happen to you? You engage to reverse, no obstacles behind the car and yet, the #reverse sensor starts buzzing and beeping endlessly#
parking sensor installation
Used my Hyundai i35 / elantra in this video, but good for any other brand
Video Editor: #PowerDirector
play.google.com/store/apps/de...
Music: www.bensound.com

Пікірлер: 30

@Pakistanmypassion 2 жыл бұрын

Thanks mate I solved this problem after 2 n half of noise after watching your video.. thanks again

@thediygovernor 2 жыл бұрын

I'm so happy to hear the video was worthwhile to you. Thank you so much for your feedback

@estrellanarciso4493 Жыл бұрын

Thanks

@ipbp Жыл бұрын

תשמע אתה אגדה 😅

@Jems-ok7nm 2 жыл бұрын

Thanks Sir...

@thediygovernor 2 жыл бұрын

With pleasure!

@kathynelson1709 2 жыл бұрын

Thank you for you video Do you have any instructions as to fixing a parking valet that keeps cycling on my dashboard

@thediygovernor 2 жыл бұрын

Hey, not sure what you mean... can you please send me some more details regarding your issue? maybe even an image

@kathynelson1709 2 жыл бұрын

@@thediygovernor thank you for your reply. I did fix my parking Aid it was the left and right cameras on the back bumper. I sent for them they cost me $84 I got underneath my car and watch the video as to how to fix them and I did my battery was draining that has stopped now also on my 2013 Escape the back tailgate door would not close. I then went on Google and saw a gentleman talk about the same issue. I found out you have to have a door or window open to shut the tailgate. It's the pressure in the car That keeps popping the door open. I'm so so happy I got this fixed. And now my battery isn't draining anymore either I am a 71 year old woman young. I guess you can do anything you set your mine to do. Thank you for your support. God blesses us with all kinds of wisdom.

@suhailasaba1051 Жыл бұрын

Thank you for your video. Does the display have a voltage when the car is turned off ? I need to cut the display cable and take the display outside in order to check and repair it and I wonder if I should disconnect the car battery or not ?

@thediygovernor Жыл бұрын

Hi Suhaila Saba and thank you for your reply I'm not sure about that because I didn’t install my kit, I just replaced a damaged sensor in an existing, already installed set. I guess it works the same as it works for any other component that connected to the battery. To be on the safe side, you better consult with an auto repair shop 10x

@suhailasaba1051 Жыл бұрын

@@thediygovernor Thank you for your answer

@aldovandenhaute2488 Жыл бұрын

Hello my car has the same old conector as yours. Only one sensor is broken. Any idea of where to find it? Regards

@thediygovernor Жыл бұрын

Hey Aldo, well the solution is in this video. You should disconnect the sensors one by one until you find the broken one, and replace it. Good luck!

@oliverpejcic 2 жыл бұрын

Hello, But how do you know if that is the culprit? Because in my situation every sensor has that clicking noise when you listen to it carefully, but I still get continuous beeping notice that I fix by hard pressing the sensor on the left and it then fix itself, but as soon as I go from D or P back to R(reverse) it changes back to that continuous beeping noice. Sensors are 2 weeks old, had that issue from yesterday where I drove the car and myself to Skii resort.

@thediygovernor 2 жыл бұрын

Hello Oliver, That's sounds to me like a bad installation of the sensors Maybe you should try to disassemble each sensor at a time, until you find the one that responsible for the continuous beeping notices, and then replace it with a new one It also possible that the control box is bad and should be replaced Good luck!

@oliverpejcic 2 жыл бұрын

@@thediygovernorApparently, it was the third sensor. When I've unplugged the 3rd sensor It started working but without that one apparently. Anyways, I have changed all the sensors just in case, and now it's all good.

@vedranbrkulj543 Жыл бұрын

Hi, Tnx for the video. Any idea why Cisbo sensors (same model as yours) not beeping at all? After cleaning with WD40 starts beep but after 2 hours stops again.

@vedranbrkulj543 Жыл бұрын

How to find broken one if theres no beep?

@thediygovernor Жыл бұрын

Hi, I understand that none of the 4 sensors work? In that case, the problem is probably withing the control box to which the 4 sensers are connected. According to your description, a broken control box sounds more probable then simultaneously malfunctioning 4 sensors

@ParleysWoodedJourney Жыл бұрын

@@thediygovernor where would we find the control box? I have a Nissan NV3500 2016

@thediygovernor Жыл бұрын

The sensors are connected directly to the control box, so it supposes to be close to them. You can reveal on of the sensors and its string until you reach the control box, or you can just try and remove or reveal covers inside the trunk (my favorite method - trial and error) until you find it

@Gourmondise 2 жыл бұрын

Same freaking sensor is playing up as yours. I'll do some cleaning and if this doesn't work I'll order a replacement. Funny enough the whole system costs less then a replacement sensor.

@thediygovernor 2 жыл бұрын

Yeh, that one bad sensor can be really annoying, and makes the whole alert thing useless. Good luck!

@saffouhbarikhan4436 6 ай бұрын

what is this music for?

@ronniewells9086 11 ай бұрын

I have a proton. I can't find sensor kit anywhere does anyone know where I can find one. I'm in the UK.

@adin82 8 ай бұрын

Proton from malaysia?

@Sidg2 Жыл бұрын

Hi. I have SUV. I want to install front parking sensors. These are my two queries:- 1. How many parking sensors should I install in front bumper ? 2. How far outer sensors should be installed from side edges of the front bumper ? So that it should work accurately, provide safety but no continuous irritating alarms should occur from nearby side traffic also .

@thediygovernor Жыл бұрын

Hello Sidg2, Sorry but I have no experience installing sensors new sensors. I only know How to fix existing and malfunctioning ones Plus, you need to remember that the front bumper sensors supposed to operate on Drive mode (instead of Reverse mode)