Installing Passenger Foot Pegs On My 2020 Low Rider S
Пікірлер: 59
@areiseekaywhy3 жыл бұрын
I’m glad I found this video. I changed my stock exhaust awhile back to short shots on my ‘19 softail. Couldn’t for the life of me figure out how to mount the one peg back on but now I do! Thank you!
@melaniemorin79702 жыл бұрын
Wow thank you for this amazing video! The details and step by step instructions allowed me to install my passenger pegs on my Harley Street Bob. Super happy!
@509drone2Ай бұрын
Thanks for the video! Was easy to follow along with when I installed mine.
@ralphyboyj7927 Жыл бұрын
Thank you for the Explanation of the two different holes for stock pipes and custom 2 into 1. I would have had to change the placement in a couple weeks.
@jamestuite38332 жыл бұрын
Best video I've found. Thanks bro!
@nathanbretherton9760 Жыл бұрын
Thank u , I was a little concerned about installing my passenger hardware on my 2020 Street Bob as I have a TBR 2-1 exhaust and wasn’t sure if I had to replace the exhaust as it covers my lower part but now I see I can install them on the upper part. Thank you again
@snozzybosch7503 Жыл бұрын
Great video. You have a good calm and straight forward way of speaking that I still confidence in a person. Well done. Nice bike. I looking to get the same bike and install the same pegs.
@Chirrell11 ай бұрын
Wild bro, same bike and we picked the same pegs. Good vid.
@RyanWitherspoon8 ай бұрын
Nice 👍
@seang31012 жыл бұрын
Used this video as a reference. Hella helped out 🤘🏻
@230JS6 ай бұрын
Easy and very informative video. ❤
@Kikdrum732 жыл бұрын
Nice job bro. I liked your down to earth easy simple approach. Obviously not a difficult job, yet we love the Tube for everyday know how's.
@PRD2HNT2 жыл бұрын
Thanks for making this video. I was able to get tools I needed set up and do this quickly.
@RyanWitherspoon2 жыл бұрын
Awesome
@jasonlewis59382 жыл бұрын
thanks for the vid. just bought a 2022 and got some aftermarket pegs off amazon and didnt know about the plastic caps. lol
@Zelus9512 жыл бұрын
Nice video. Helped out alot. Thank you
@hb1966ncАй бұрын
Thanks for the video I was wondering where to put it with the stock exhaust, I was going to make a plate to lower the peg I didn't know H-D made a second hole for that reason ;)
@germancontreras99752 жыл бұрын
Bro !! Very well explained thank you
@naht8than2 жыл бұрын
You helped me a lot. Thank you
@carboorides20643 жыл бұрын
Good job bro! 👍🏾
@jerrycool30343 жыл бұрын
Very helpful thanks man
@michaelslean43484 ай бұрын
great video
@peterganse3 жыл бұрын
Thank you, man. Worked for putting my new pegs on my 19 fxbb ✊🏼
@jasoncrose86502 ай бұрын
Best install video on KZfaq. Are you still riding bro?
@RyanWitherspoon2 ай бұрын
Thanks . Yes still riding just not as much as I used to
@michaelcohen202 Жыл бұрын
Thanks man!
@max47772 жыл бұрын
Great video!!! HD wanted to hit me in the head to do this.
@hdryderct Жыл бұрын
Did you use a 1/4 or 3/8 set to get those pegs on? I can’t get mine off with the 3/8 and a T45 socket so just curious.
@peej.w75983 жыл бұрын
Have those exact pegs on mine
@seanstrickland49702 жыл бұрын
Thanks
@MarvFitBikesKicks2 жыл бұрын
How did you remove the stock ones? Those things are like impossible to get off, idk what to do smh
@RyanWitherspoon2 жыл бұрын
Not sure how to remove the stock ones all I did was put on passenger pegs
@JR-eq3qh2 жыл бұрын
Are those the factory pegs you used and just located them in a different spot ?
@RyanWitherspoon2 жыл бұрын
No they are Harley brand but not factory.
@jonathanbarnett39543 жыл бұрын
What seat are you rocking @ryanwitherspoon
@RyanWitherspoon3 жыл бұрын
The Harley Davidson sundowner seat
@nelson-ir2jz Жыл бұрын
Where did you get the spring and ball from??
@RyanWitherspoon11 ай бұрын
They come as a separate kit I got mine from the dealership
@jasonharrold6686 Жыл бұрын
If you replace your forward controls can you use them as rear passenger pegs?
@RyanWitherspoon11 ай бұрын
I’m not sure
@JVW90073 жыл бұрын
Where did you get the passenger peg mounts?
@RyanWitherspoon3 жыл бұрын
Harley Davidson
@lapinobel3 жыл бұрын
Got part nrs for seat and sissy bar/pad?
@RyanWitherspoon3 жыл бұрын
Back rest Part Number: 52300557 Sissy Bar Part Number: 52300434 Sundowner seat Part Number: 52000350
@leetnessgaming97512 жыл бұрын
My mount seems like it will fit the bike no issue but the peg hole seems way to big
@RyanWitherspoon2 жыл бұрын
Interesting not sure about that one
@misterspunky12 жыл бұрын
What are the pegs called? Do you have part number?
@RyanWitherspoon2 жыл бұрын
Sorry I ordered them in the store can’t remember which ones I ordered
@bryanduran14742 жыл бұрын
I got the onetk pegs from Amazon
@mngdiamond3 жыл бұрын
Where can I find the parts?
@RyanWitherspoon3 жыл бұрын
Harley Davidson dealership
@geoben18103 жыл бұрын
Credit for the effort son, but you might want to learn how to use a torque wrench properly. And any other wrench as well. Not using a torque wrench properly could compromise the tightness of whatever you've installed. ✌
@RyanWitherspoon3 жыл бұрын
Well what exactly did I do wrong? I’ve checked my bike many times and everything I’ve installed is still tight , And I’ve never stripped a bolt
@HDclubstyle3 жыл бұрын
What brand are they?
@RyanWitherspoon3 жыл бұрын
Purchased them from Harley Davidson
@RyanWitherspoon3 жыл бұрын
It’s Harley Davison brand
@ad783 жыл бұрын
The left should be the lower not the upper
@RyanWitherspoon3 жыл бұрын
It’s right the wife has already sat on the back for a few rides