My Gaming Chair has been driving me crazy. Every time I swing or revolve the chair it makes a right racket like the bearings are broken or something. Here's how to fix the chair if you have a noisy , popping one like this too.
Пікірлер: 143
@Moex4 жыл бұрын
For me the popping wasn't only happening from turning, but more so from shifting forward/backward. The fix I found was popping the top of the piston out of the tilt mechanism assy and cleaning/greasing that up so that it seats nice and tight and doesn't have any room to shift around.
@queenshantel4 жыл бұрын
I’m going through that. Can you help me with how to fix it?
@novapophis4 жыл бұрын
@@queenshantel I just did this by following @Bovine_OW's advice. Turn your chair upside down, yank off everything by pulling on the feet until the rod comes out of the tilt mechanism. Grease the shit out of it like the guy in the video, and put it back in. You just need generic elbow grease: www.amazon.com/gp/product/B000CQ4DIM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@jordanscott64104 жыл бұрын
im having the same probelm after getting a new gas cylinder i dont know how to fix it pls explain it well if u awnser
@kingkong10403 жыл бұрын
Ya I put in 2 brand new washers/bearings off amazon and it did nothing for me. I have to try this. Mine clicks/pops if I lean forward when getting up, opr when sitting down and into position....pretty annoying for a $300~ chair
@Xaizen3 жыл бұрын
I was close to buying a new one until I stumbled into this video, I can't believe i've been putting up with the popping for years thinking it was just knackered and i've fixed it in 5 minutes... Thank you so much!!!
@soldonwish4 жыл бұрын
My brand new gaming chair is squeaking like hell and this helped a little
@hoopiskey36614 жыл бұрын
Giant Oof same
@danial49684 жыл бұрын
same, got this chair yesterday and it's already creaking...
@anttheant50194 жыл бұрын
same here
@InsoiDev3 жыл бұрын
Same
@eppsislike3 жыл бұрын
Bought a $300 gaming chair 2 days ago, and it's already squeaking haha
@MSproductionsNY4 жыл бұрын
You saved my wonderful 18 year old desk chair - thanks. The washer was broken and 1/3rd of it could not be found anywhere. I had a box of random washers from old sink repairs and other work - found one that fit almost perfect and no more noise
@madmac_jr7532 жыл бұрын
I know this video was like 4 years ago but I got a gt omega chair about 6 or 7 months ago and it has been creaking since I have had it. Finally got fed up of the noise and this video fixed it so, Thank You Very Much!
@johnnywayne34436 жыл бұрын
Thanks for the video. My chair pops loud enough to disturb other people and drived me CRAZY!!
@icarian764 жыл бұрын
Thanks! Terrible creaking with my Respawn chair every time it leaned back. Thought for sure it was the spring tensioner. But alas ,same spot as yours with some axle/wheel grease and now blissful quite. 👍🏼
@stormtrooperbray4 жыл бұрын
Ahhh thank you so much! I was dreading buying a new chair when mine is only 3 yrs old and looks new! This did the trick. Much appreciated:)
@momchilandonov2 жыл бұрын
Great video and I used it for my Kring chair (cheaper gaming series not much known). But I have another issue - when I sit the chair quite abruptly moves down in a single motion and makes an noise - cleaning and lubricating it didn't help and the rubber looked good. When I stand up it makes the same sudden movement and noise, as if the mechanism is quite clogged - it doesn't move slowly as it used to be when new.
@napchier5 ай бұрын
Great. This helped. I've been putting up with this for years, replaced the chair, same crap going on with the new one, couldn't believe it, saw this, problem solved. Now it's time to fix the old one 😂. I could see there was a little grease inside the new gas lift, but very little. Did what you did - ace!!!!!
@marshall813 жыл бұрын
Worked perfectly! Thank you
@sarahflowers81374 ай бұрын
OH MY GOSH!!!! thank you for this video.. I was given a great office chair, but it stuck/ and thudded when I would get up... this video helped me fix it!!!!
@paigelore6 жыл бұрын
Woo hoo! Took two tries but once I figured out I had broken your first rule (put it back together the way you took it apart) and re sorted the pieces in the right order she is now silent as a mouse :) Note : My DX racer had two washers with bearing tracks so i put one before and one after the bearing. -thumbs up and like-
@zeonllapi14325 жыл бұрын
Amazing video, job well done!
@richardbryan50226 жыл бұрын
To make matters worse Wayne, when I fell to the floor with the chair I knocked over my R2-D2 Dome frame as I was grabbing the desk for support. Been following your vids for that and have enjoyed the build. Nuts and bolt jokes aside mate, I keep talking to you on the screen " Wayne!" It is a nut, not a bolt in jest. Anyway, mate mention my poor R2-D2 and wish him well. May have to do some small adjustments to get him back in shape. Loving the vids and keep them coming. Regards from Rik in Durham UK.
@bX-rk2oo3 жыл бұрын
Hey mate, just wanted to say that although my gaming chair is a bit different than yours (Noblechair Icon), your video helped me figure my own chair issues out. So cheers!
@WorldofWayneUK3 жыл бұрын
All good. Thanks for watching Kevin
@jothomas67074 жыл бұрын
The chair was clunking every time someone sat on or got off it. We tried WD40 but that made it worse.....your method fixed it a treat. You're right.....You can never have too much lubricant! Thank you so much.
@jothomas67074 жыл бұрын
@Južni Vetar TV I didnt have magnets in the chair!
@jothomas67074 жыл бұрын
@Južni Vetar TV Followed his instructions apart from the bit with the bearings.
@shreyansdey94953 жыл бұрын
@@jothomas6707 hey jo did you just take it apart and apply more grease or did you do something different, Im having the same issue here with my chair making noise when i sit on or get off of it so am curious. Please let me know and Thanks.
@jothomas67073 жыл бұрын
@@shreyansdey9495 I followed what was in the video, and added a load of grease, but about 2 months later it started clunking again.
@legend0r4 жыл бұрын
Thanks man! I used WD-40 instead of grease, and it worked great. I had a piece of hair stuck in one of the bearings, but no broken parts. Completely removed all squeaking when spinning in the chair.
@csabalorincz93872 жыл бұрын
Careful with WD-40, if it's the "classic" blue-yellow one, since that's a water displacement formula (hence the name "WD"). I does have a lubricating effect on the short term, but removes lubrication and moisture on the longer term. They do have lubrication products as well under the WD-40 brand, but the classic one would cause more harm, than helps.
@legend0r2 жыл бұрын
@@csabalorincz9387 thank you
@Shisimocha34 ай бұрын
I fixed my chair 4 years ago that was making that same popping noise after watching this video. I'm glad I found this video again, because the same chair is making the noise again. A question though, what causes the noise anyway? None of the parts in my chairwere broken like in yours.
@NicoEmi442 жыл бұрын
tnx man, rlly helped me ! cool vid, no more popping !
@geniusshot23455 жыл бұрын
Thanks man, you'r awesome
@Ancheliq4 жыл бұрын
Thanks for that! Works for me!
@moonkomorebi57973 жыл бұрын
Thank You!! It works! Awesome Millennium Falcon, and all your Star Wars love, btw!
@samwisegamgee42803 жыл бұрын
thank you so much, my chair is now smooth af
@mitchellbuckley7989 Жыл бұрын
Great Video, love your accent , i had a cousin in Scotland who spoke English, but could not understand him
@IraMatheos4 жыл бұрын
just fixed my chair thanks for the help
@MrRigazzi Жыл бұрын
Thank you !!!
@Kyngq504 жыл бұрын
Bro I deadass clicked this video and the squeak went away out of no where 😂
@Piratskeppet2 жыл бұрын
I decided to do the same thing to my chair, clean and apply new grease. And apparently my bearing had cracked too so I went to get a substitute from an old cheap chair while I glued the original. Turns out the bearing from a ~$40 chair was far superior than that of my $250 chair
@JoeCH19783 жыл бұрын
Thank you, Sir! This saved me a lot of hassle and expense. A little improvisation to suit my particular chair model, and the problem is totally solved. #youcanneverhavetoomuchlubricant
@R3LAPZE3 жыл бұрын
will give it a shot
@mbirth4 жыл бұрын
3:58 ... I'm not sure if the grooves were in there when the chair left the factory or if they were produced by the dry ball bearing. I turned my washers around so the flat side faced the ball bearing, applied only a little bit of grease to the ball bearing (after cleaning it) and the chair felt like new.
@indexMemories4 жыл бұрын
I took it to a hardware store and the guy explained that those have grooves from the factory. No replacement was available but you can find these online just make sure to look for proper inner/outer diameter.
@markuskrabbi1392 жыл бұрын
WHAT THE HELL. I used pig's fat instead of actual grease ( I didn't have any) and it actually worked, my chair is not popping anymore. Thank you.
@bradboybradboy5063 жыл бұрын
Thank you so much! Sorted out my nitro concepts chair popping when I tilt forwards or backwards. Like new now :-)
@almostfamous16853 жыл бұрын
im literally having the same issue with the same chair did you do the same as the video or did you take the lift rod out of the actual chair part (not the feet) and re seat it with more grease? sounds like the bit where the rod to attaches to the chair is whats making the noise
@bradboybradboy5063 жыл бұрын
@@almostfamous1685 I did the same as this video, but there was no bearings in mine just poly bushings. Take photo of it before removing bushings, so you know which way they go back 👍🏻
@almostfamous16853 жыл бұрын
Bradboy Bradboy right thanks a lot for the reply mate means a lot it’s driving me crazy 😂🤙🏻
@bradboybradboy5063 жыл бұрын
@@almostfamous1685 no worries. Hope it sorts it out for you.
@Raaddiie3 жыл бұрын
Question about the tilting mechanism mine is stuck at an angle and i cant get it undone how can i fix? btw my chair is a respawn gaming chair
@digisquideh4 жыл бұрын
wow random one, but my chair was doing the same ...googled it and find this vid ....and see my R2 build is exactly where yours is in this vid LOL ...have been following your r2 build vids too :D
@WorldofWayneUK4 жыл бұрын
lol,. I get around in the KZfaqsphere :D
@digisquideh4 жыл бұрын
@@WorldofWayneUK Top bloke, keep up the good work :)
@gundamfan20204 жыл бұрын
just be aware too much grease can cause a hydraulic lock so yes you can have too much..
@k0rd33 жыл бұрын
My clip is broken but I got it back on and im scared to take it apart I need help
@DamianMathew3 жыл бұрын
I think it is funny that according to the view about 54k people gathered here while probably sitting on their squeaky gaming chair haha love it
@WorldofWayneUK3 жыл бұрын
Lol. Good point
@bluexhxr69262 жыл бұрын
Is there a way to make tou chair spin faster
@yeysbaws3 жыл бұрын
What size is the rubber? Mine got mangled so bad that I don’t even know what originally looks like
@karappokun5 жыл бұрын
Tried this on my DxRacer and realized that mine was put together wrong and after this video my chair is now silent. :D
@LASTRIKE5 жыл бұрын
I have a MAXNOMIC Casual Sport. I don't see a bearing in it. I only see two rubber pieces and two washers..Is this right?
@WorldofWayneUK5 жыл бұрын
If it's a gas lift then pretty much all chairs on the market are the same. Not sure about your one. Sorry.
@jasonorme35005 жыл бұрын
My gaming chair didn't have a bearing in it either. My old one did. But one of the rubbers was snapped, so I glued it. Seemed to fix the problem with the loud popping.
@kyrian_cy2 ай бұрын
ive had a john lewis chair for literally less than a month and it's already doing this. they said it was normal so did not repair, however its really annoying
@badlilstang3 жыл бұрын
my chair is new and makes a pop creak type sound when rocking slowly.. my Maxnomics is like butter
@death-by-lag85793 жыл бұрын
I just did this and it decreased the clicking noise when I lean forwards or backwards but there’s still some there, I might not have put enough grease.
@LBCAndrew3 жыл бұрын
The noise when leaning forward and backward is usually caused by the other end of the shock mount where it attaches to the seat end. It also can be greased to reduce the clicking noise.
@immanuelbisrat49852 жыл бұрын
My gt gaming chair I got to fix my angle adjuster but can't find a video on it
@iphone60103 жыл бұрын
Used $100 dallor secret lab mint condition but I can see why the seller sold it lol God damn I don’t have the tools or time to pull it apart I shot some dw 40 it helped kinda this is a Help full video
@Savi-digital3 жыл бұрын
Mine sqeaks when i turn around in the chair, spinning in it.
@marcoslorenzo97086 жыл бұрын
The most youtuber
@NemesisDonFatal5 жыл бұрын
I have a Genesis one and when i tilts alitle bit in the front or back it sounds like an old door its ony 2 months old and i find it wierd the sound happens only when u try to sit and get up from the chair..it just squeaks
@_rydes_5 жыл бұрын
Same Issue here
@antonisjonathn88615 жыл бұрын
It didn't work for me idk why
@queenshantel4 жыл бұрын
Same for me. It’s hurting my legs
@tikki7233 жыл бұрын
My chairs bearings and rubber piece were broken beyond repair. I put everything back (with tons of lube) without the broken parts and it works fine, for now. Curious to know what will happen if I just leave it like that.
@WorldofWayneUK3 жыл бұрын
Lolm no harm in trying
@SegwayJesus5232 жыл бұрын
Any updates as to if the chair fell apart after ~1 Year? Currently doing the same thing lmao
@tikki7232 жыл бұрын
@@SegwayJesus523 chair is still in one piece, still makes that noise though so it didnt really help
@crazyapple21013 жыл бұрын
What I Did : Literally put grease on space that touch each other: Screw socket washers any metal surface that touches to another metal surface. Now i can no longer distinguish which is my chair and which is my butter.
@Salpeteroxid5 жыл бұрын
You did this wrong. The rubber is supposed to go on top of all of that. You can't have a ball bearing riding on rubber like that. If you open it and check the rubber will just lay there inside the stand. Did this yesterday but didn't have any thick grease so I took old hair wax. It was dry and really thick and it works perfectly until monday when I will get some from work :p The thick rubber thing is supposed to be like that and it goes closest to the piston, then the biggest bearing washer, then the bearing and then another bearing washer. Place the mount and then finish with the washer and then the clip.
@trevordoeshalloween59945 жыл бұрын
Thank you for that
@Salpeteroxid5 жыл бұрын
@@trevordoeshalloween5994 No problem bro!
@bluexhxr69262 жыл бұрын
Would you know how i can fix a hard spinning chair
@WorldofWayneUK2 жыл бұрын
No. Sorry
@OguraToasty9 ай бұрын
I did all this with the the industrial lube, but it still pops when I turn. Even louder than yours.
@MrBengalezul3 жыл бұрын
this is what it fixed my chair: just take some grease and put in on the bolts before you screw them on the base of the chair. just watched 5 videos and nobody says that.
@d0r0thy3 жыл бұрын
My chair leans forward a bit which can be annoying
@nemosgames44733 жыл бұрын
Dude thank you so much my chair was so obnoxious with the cracking and popping now there's no noise! Made a video on my tick tock find it at Stancejunkyy
@WorldofWayneUK3 жыл бұрын
No probs just watched it
@nemosgames44733 жыл бұрын
@@WorldofWayneUK dude I can't think you enough!!!!! My day just got so much better
@Rosinronin3 жыл бұрын
This also works for if your chair isn't reclining
@tzeffsmainchannel7 ай бұрын
@thelightnearhome81505 жыл бұрын
What the brand name of that chair
@WorldofWayneUK5 жыл бұрын
Trackracer
@thelightnearhome81505 жыл бұрын
@@WorldofWayneUK thank you
@Lqnkd_3 жыл бұрын
Everytime I bring it back up from reclining it makes a really loud noises
@barnacleboi25953 жыл бұрын
Did you try turning it off and then on again?
@Lqnkd_3 жыл бұрын
@@barnacleboi2595 nah but I think rice would work
@shadowduck83833 жыл бұрын
i have the same problem, did you find a fix for it?
@Grynjolf2 жыл бұрын
Unfortunately I tried doing exactly this (following another fellas guide) and it didn't work. It's still so loud. KER CHUNK. Any other ideas?
@WorldofWayneUK2 жыл бұрын
In that case I would just get a new piston. They are about £10-£20 on ebay
@neuto3 жыл бұрын
Odd. My chair has the bearing between two washers, and the rubber ring comes after those, closest to the seat of the chair.
@johnnydingo86802 жыл бұрын
Mine does too , could be different manufacture methods or assembly on cheap chairs is not under quality control.
@death-by-lag85793 жыл бұрын
I have and s-racer chair and mine doesn’t have a bearing it just has a metal disk
@WorldofWayneUK3 жыл бұрын
Weird
@death-by-lag85793 жыл бұрын
World of Wayne do you have any clue why?
@WorldofWayneUK3 жыл бұрын
No. I thought the mechanics of these were pretty generic
@patricianicolesebastian46353 жыл бұрын
❤️❤️
@mhatrey4 жыл бұрын
> You can never have too much lubricant That's what she said!
@RichardCJohnson6 жыл бұрын
Pliers, tissue and grease...sounds like a sexy party 😂
@WorldofWayneUK6 жыл бұрын
lol. The whole video is one big euphemism :D
@death-by-lag85793 жыл бұрын
My chair is still popping after doing this
@SuperSonicDonk3y4 жыл бұрын
Could I just buy a proper bearing instead of that plastic one?
@richardbryan50226 жыл бұрын
Nice one Wayne. Mine collapsed on me last week and i went arse over tit lol!
@WorldofWayneUK6 жыл бұрын
OMG!!!!
@manny999560703 жыл бұрын
All gaming chairs are plagued with this terrible design. Gaming chair bottoms are offset to the axis of the hydraulic axel. This applies a massive torque to the bearing and that popping sound is the bearing assembly crying for its life.
@hinatashoyo29993 жыл бұрын
i dont understand i did all that but chair still makes sounds :(
@WorldofWayneUK3 жыл бұрын
Sometimes it works sometimes its time to get a new piston.
@aspect28813 жыл бұрын
this works with vaseline also?
@WorldofWayneUK3 жыл бұрын
No idea lol
@davidspencer83733 жыл бұрын
Like vide
@h7opolo Жыл бұрын
unconvincing
@qwerty744 жыл бұрын
This never lasts more than 2 days. I suggest buying a new chair because trying to fix this will drive you crazy. The whole mechanism design is flawed from the beginning.
@WorldofWayneUK4 жыл бұрын
Yep I sadly agree
@SuperSonicDonk3y4 жыл бұрын
Almost all chairs have the exact same mechanism tho
@anthonygill56218 ай бұрын
So you didn't show the bit where you was going to repair the bearing with glue because that part was absolute nonsense. Grease cured it.
@marcoslorenzo97086 жыл бұрын
Like you are the bost
@jeathtunes7694 жыл бұрын
Gaming chairs r fucking shite! Had to sell one due to a really sore tailbone!
@josephknightcom5 жыл бұрын
Why does every youtuber think they need to get a shot of themselves holding their chin and staring thoughtfully into the air for use in their vid thumb? Think for yourself. Come up with your own idea.
@princevegeta77855 жыл бұрын
You must be new to life. It's not a youtube thumbnail thing, its a human pose thing. However "unoriginal" your hipster logic might claim this to be, this pose is common throughout many mediums, time periods and cultures. So, all you did was expose your ignorance. Good job. You might have to google mediums but it's ok. That's what learning is for.