How to fix a motor ticking rattling noise. Rocker arms 3.6 Pentastar V6 Problems. The JT Feel Test.

Рет қаралды 88,205

4 жыл бұрын

This Part 2. Do not do your feel test unless the camshaft in the right position.
Be sure and watch Part 1 here: • How to fix a motor tic...
Shaw Family Videos here: • Replace Rocker Next to...
In this Video I introduce the J.T. feel test. This will be the best way to find out whick rocker arm or camshaft has come apart.
Please NOTE: The buck of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy
#Pentastar
#Motor Ticking

Пікірлер: 215

@robertdickerson16 2 жыл бұрын

As a 15 year self taught mechanic whose currently during timing on my mom's 2012 charger 3.6 pentastar for the first time ever ,I feel u brotha,it took me til my 10 year to stop being lazy and rushing and so it right ,take as much off as possible ,to make it easy ,and always will,u got a new subscriber after this one

@OnlineMechanicTips 2 жыл бұрын

Thanks my friend

@morrisnkubone2247 Жыл бұрын

@@OnlineMechanicTips please can I have your email address or whatsapp or

@OnlineMechanicTips 4 жыл бұрын

How to replace a camshaft and cam phaser here: kzfaq.info/get/bejne/pbt4gZR4t7OnZ4E.html Shaw Family Videos. Rockers close to the timing chain video here: kzfaq.info/get/bejne/a-CDnaSjytbRlqs.html

@BLud_Bro_FoE Жыл бұрын

You are the truth bro thank you so much for making these 3.6 videos .people like you make the world a better place keep up the good work❤

@pingchen7563 Жыл бұрын

I am watching the rock arm’s replacement after dealership working on it for $1,100 (non damaged CAM)… thanks for the informative video

@citizenplane5840 Жыл бұрын

Man I just found you and I love your videos. I knew that's what was causing the ticking but to actually see you tear it apart and show us is really cool. I've heard many pentastars with this tick including mine. I actually had a dodge avenger before this that had a milder tick. But I imagine it's that same valve in just about 70% of em. Maybe they don't get enough oil bc of the engine design or something idk. But like I said I've heard quite a few 3.6l with that tick.

@zsmarine0831 2 жыл бұрын

you’re the man for this one

@andrewputnam1047 Жыл бұрын

Thank you for this. I've been trying to find the source of ticking in my car. I've tried that field test, but I didn't know the lobes being all the way down on the rockers could make the test fail. subscribed

@kylepociask5072 3 жыл бұрын

Great video! Very helpful. Keep up the great work and great videos.

@OnlineMechanicTips 3 жыл бұрын

Thanks for watching bud. Please thumbs up the video and subscribe to the channel, thanks

@DestroyGamesX Жыл бұрын

bro somebody give this guy a raise

@jcphillips1412 3 жыл бұрын

Thank you for the video . I couldn’t find the bad rocker(s) on bank 2 until turning the engine over a a couple times

@OnlineMechanicTips 3 жыл бұрын

Thats whats up, thanks for watching bud

@Loyzfr1 3 жыл бұрын

@@OnlineMechanicTips I had one bad rocker and 2 colaps lifter.

@thecommodoredecker Жыл бұрын

This is exactly what im dealing with now

@testastrettar6 3 жыл бұрын

"man get outta here" lol love it.

@OnlineMechanicTips 3 жыл бұрын

@ 6:48. lol I actually had to look at this video to see what you was talking about, I do not remember saying half of the things I said in this video..lol..I get crazy sometimes..lol..

@al197861 3 жыл бұрын

Wow bro you Excellent Worker and Mechanic

@OnlineMechanicTips 3 жыл бұрын

Thanks for watching my friend

@bigbossman5969 3 жыл бұрын

its such a problem with the bad rocker arms on those pentestar engines Chrysler should have extended the warranty on those parts I pull up next to quite a few ticking penstar engines

@daveramsay8115 3 жыл бұрын

Great job 👏🏽

@OnlineMechanicTips 3 жыл бұрын

Thanks for watching Dave, please thumbs up the video and consider subscribing, thanks

@michaelclark6506 2 жыл бұрын

Thank you btw

@5jjt 3 жыл бұрын

Are the solenoid actuators in the cam phasers preventative maintenance items? Or, do they usually not need replaced? Thanks for the video!

@XR650L_GUY Жыл бұрын

When you first see the intake ports cover them immediately. This crucial tip by an old dude.

@OnlineMechanicTips Жыл бұрын

Great idea Tom. Get careless at times.

@timsoutier4282 4 жыл бұрын

Good video, I am about to attempt this myself. I have a horrible ticking, and I think its coming from both banks. Super frustrating since I no longer have a warranty and only 54K miles. I do have a few questions though. What size sockets did you use for the crank shaft and oil control valve? Did you replace anything else while doing this job, i.e. valve cover gaskets, spark plugs, pcv valve? Any other recommendations? Thanks

@turtlemotonation Жыл бұрын

Are the cams interchangeable between all Pentastar 3.6’s?

@randyu8688 Жыл бұрын

I changed out the exhaust cam and all the rocker arms on the right side and the tap went away but I can hear a tick like it's in it beginning stages of tapping.

@stevewallis4607 3 жыл бұрын

Great Video, I am working on a 2014 Dodge Grand Caravan. The T30 Torx bolts holding the cam bearing caps are not coming off. We have broken 3 bits. Is there something we are doing wrong?

@OnlineMechanicTips 3 жыл бұрын

wow, not a common problem at all. Either they was over tighten or you simple using cheap torx bits. And btw, make sure the torx bit high quality because once you shear the bolt, its vise grip time. Hope you get it off bud.

@donmcmullan5422 4 жыл бұрын

Hey JT, great videos! I think I got this problem in my 2014 town and country. I'm confident in getting to the camshaft but not putting it back together and timing it. How much does this job usually cost?

@OnlineMechanicTips 4 жыл бұрын

Its hard to say, the estimate cant be properly made until its inspected. You may need cams, you may not. And a lot depends on what the shop charges per hour..Thanks for watching, please thumbs up the video and subscribe to the channel, thanks

@donmcmullan5422 4 жыл бұрын

@@OnlineMechanicTips thanks for the response. And I clicked subscribe already! Good job breaking down what you're doing in your videos to a basic understanding btw

@reklessgaming5373 Жыл бұрын

Damn my charger has been doing this for a hot minute... sounds like a Cummins

@BMJAUDI 3 жыл бұрын

Awesome vid! Thank you for doing this. Is it possible to get all of the lifters out without removing chain/cam sprockets/camshafts? Subbed to your channel by the way

@OnlineMechanicTips 3 жыл бұрын

Thanks for subbing bud. Yes its possible but its also risky to somebody that has not done one. You have problems with rocker arms in cylinder # 2 and #1. I do not do it this way because it is easier for ME to simply remove the cam phasers and the chain. This may not be easy for somebody else. Thanks for watching

@BMJAUDI 3 жыл бұрын

@@OnlineMechanicTips Thanks for the reply! Great answer. I think I’ll order the tools and do it the right way. I haven’t got in there just yet but I think I’m going to need a camshaft anyway so will be pulling phasers. It’s making a dull thud right after the tick. You mentioned that if it makes a thud it will likely need a camshaft. No CEL or misfires and still runs smooth. The tick is very obvious though. I was an ASE Master certified auto tech and worked on Audis/VW/Mercedes for 20 years but this is my first Dodge/Chrysler. Needed a van for the growing family😆

@Stealth853 3 жыл бұрын

Thanks for all of the helpful knowledge and tips. What do the bearing caps need to be torqued to? When loosening them I broke a T-30, mainly because they were cheap, but the only torque specs I found were 89 in-lbs.

@OnlineMechanicTips 3 жыл бұрын

kzfaq.info/get/bejne/rt2EbN1nuKidnGQ.html

@mikec2220 4 жыл бұрын

Question from a newbie. Isn’t it a good idea to also change the lifter on the failed rocker arm? Reason I say this is there may be a blockage in the lifter itself and maybe lead to the failed rocker arm. I’m about to do this job on my wife’s 2016 T&C van. I’ll change all the rocker arms and lifters on this 98,000 mile engine. Just to make sure I won’t do this job again in 6 months for another failed rocker.

@rserman5025 4 жыл бұрын

I have the same exact vehicle thinking of doing it myself dealer says 2000 any luck getting it done?

@joer6912 3 жыл бұрын

One of the Best videos out there!! I was wondering if a straight grenade pin is needed? I've see where that is also used but don't know what it does? Thank You so much!! This tutorial saves me so much $$$

@OnlineMechanicTips 3 жыл бұрын

Thanks for watching bud..please thumbs up the video and subscribe to the channel. Thanks

@Robinchavez-yb4qw 5 ай бұрын

Same test for the second generation pentastar exhaust rocker arms ?

@homeguy4 3 жыл бұрын

I just replaced one of mine. Crazy what you have to do to get a $10 part out. I drive a Wrangler with the 3.6

@OnlineMechanicTips 3 жыл бұрын

Thats whats up man. Those Wranglers are not easy, lots of tight things to get off, but glad you got er done. Thanks for watching. Please thumbs of the video and sub the channel for me, thanks

@gregcadena1010 2 жыл бұрын

Wish you was in San Diego yo work in my car same problem is going on with my rocker arm

@attackpilot4540 2 жыл бұрын

I cannot get the phaser back on. Tried everything you recommended

@user-cd8bw9wk9d Жыл бұрын

Brother. I hear ticking noise from bank 2 but it's only when the car heat up also I got P2096 code and made me confused if it's an exhaust leak or rockerarm failure

@turbotom416 4 жыл бұрын

Did you see the gray stripes on the cam tone wheels? that is powdered metal from rocker bearings.

@OnlineMechanicTips 4 жыл бұрын

Dang, I didnt think to do that and speak on that..That tone wheel usually brownish tho aint it?

@crzydv13 3 жыл бұрын

Thank you for this comment. I was trying to figure out what the grey stripes were on my van today, I wiped them off and then I was worried that they were important.

@jasonl7025 3 жыл бұрын

Hi JT： how hard is it to rotate crank shaft? I saw you used a break bar to do it. Cannot rotate the engine last time since I was afraid too much force could damage timing chain. Best regards

@hackdeez1075 2 жыл бұрын

The crank bolt can easily take the torque required to rotate the engine. If it won't rotate relatively easy you probably jumped timing and you have interference between valves and pistons

@Luchador_OnaLowrider 3 жыл бұрын

Would you recommend replacing the valve springs with that job?

@OnlineMechanicTips 3 жыл бұрын

Hey, not really. I haven't seen any problems with the springs

@averyanderson6821 2 жыл бұрын

Hey Bro, this video was needed I dropped $1100 on a 2015 dodge journey rt 3.6L cylinder 2 was misfiring, I have the same ticking sound, which let me know the rockers are sh!ty! My question for you is if all 6 ignition coils and plugs were changed, fuel injector was tested and cylinder 2 still misfiring, what could possible be the issue?

@OnlineMechanicTips 2 жыл бұрын

Hey my friend, when im faced with such a problem, I always go to my compression test. If you have a misfire AND a ticking noise, theres a chance that its related, meaning a broker rocker arm cold cause both. Was that the only code you getting P0302? Also are you subscribed to the channel?

@michaelclark6506 2 жыл бұрын

Bruhhhhh I wish I would have watched this yesterday.I didn’t think about Turning the crankshaft but I have a question yesterday I had a hard time getting the back valve cover off 2012 grand caravan do I have to take that PCV valve off on the right side or whatever it is?

@OnlineMechanicTips 2 жыл бұрын

Yes.that pcv valve have to come off then twist the valve cover the right way and remove

@shane2163 2 жыл бұрын

Hey man I've got a question on a 2017 promaster with the 3.6 the dimple on the exhaust cam phaser won't line up but the intake phaser dimple lines up? Am I just not in TDC? Or was is not timed right to begin with?

@OnlineMechanicTips 2 жыл бұрын

That one is not suppose to line up..focus on the 2 lines on both phasers..they should line up..also are you subscribed to the channel?

@shane2163 2 жыл бұрын

@@OnlineMechanicTipsgot it thanks. Of course man you do some great work!

@sweatyandreadyb 4 жыл бұрын

I’m here trying to figure out how to do a 5.7 hemi rocker arm/shaft check.

@OnlineMechanicTips 4 жыл бұрын

Hello my friend. The 3.6 Pentastar engine and the 5.7 Hemi different when it comes to checking for vavle train noises/faults. The hemi needs to be torn down much deeper the the 3.6 to find/view problem. So your comment basically can only go as far as listening for valve train noise. Any thing else, engine will need to be torn down..Thanks for watching, please like the video and subscribe to the channel for me, thanks

@donmcmullan5422 4 жыл бұрын

JT I finally got both valve covers off and tried your patented feel test but nothing seemed loose. What size socket is that on the crankshaft to rotate the engine?

@OnlineMechanicTips 4 жыл бұрын

Awhhh bud, I dont know it by hard..I would have to check tommorro. But yes, rotate it and check all with the lobes off of the valve

@donmcmullan5422 4 жыл бұрын

@@OnlineMechanicTips thanks. I'm about to rotate now

@ChiraqVet 2 жыл бұрын

Damn chrysler loves some wire fasteners. I cant get em loose on the rear.

@dbaker3264 4 ай бұрын

For the love of Christ, 6 shop rags in the intake manifold ports, before you drop a bolt down one of them. If your going to pull the lower intake manifold for oil canister repair, then 6 shop rags in the head intake ports as well.

@OnlineMechanicTips 4 ай бұрын

This video was done over 3 years ago. I've since learned that a lot of folks are like drama queens and get real serious and passionate about stuff like this. So yes, that does not look good on video and you should def cover up those ports. Never had a problem or anything fall down in there and theres no reason to keep risking that.. Good call but theres more material on this video worth mentioning dude.

@MrJjhemi 3 жыл бұрын

Hi ty for video but what would happen if you only replace the rocker and not the cam?

@OnlineMechanicTips 3 жыл бұрын

Hello, it depends on if a lobe is damaged. No need to replace cams if the is no damage on the inside lobes. Are your camshafts damaged? Also, are you subscribed to the channel?

@MrJjhemi 3 жыл бұрын

I have not taken it apart yet it has been ticking a couple months now first real low but starting to get a bit louder

@rodneysmith247 3 жыл бұрын

Is a bad rocker arm or lifter ticking or clicking noise accompanied by engine knock? Thank you for just returning my other question.

@OnlineMechanicTips 3 жыл бұрын

That is possible but I have yet to hear such a double noise.

@thatmdguy4557 3 жыл бұрын

My problem is that them can bearing bolts are straight trash and one took a dump on me now I’m tryna figure out how to get it out and put in a fresh one 😩😩😩

@dabeast8082 4 жыл бұрын

If my rocker arm ate into my camshaft. Can I just replace the rocker arm and not the camshaft?

@jtugfestiva 3 жыл бұрын

I have. The car that I did that on had a tick and ate a little bit of the cam shaft. I don’t have timing tools or the time so I just went ahead with the rocker arm. I know that it will eat up the rocker arms so I went ahead and added bestline lubricant to the oil. Mileage of the car was 140000 we are now at 240000 and still no tick. Add bestline and some fully synthetic oil and I think you should be good.

@05fordvan 2 жыл бұрын

Hey JT, how long does it take to complete this job from start to finish?

@OnlineMechanicTips 2 жыл бұрын

Hey bud, it depends on what all you doing and your skill level. I because I do not use special set up tools and im familiar with the timing it will likely take me a couple hours. But thats a misleading answer so its a hard question to answer.

@superripp7525 4 жыл бұрын

I have a ticking almost sound like knocking noise in my 2018 charger but when I accelerate it goes away and at idle it is the loudest ..any advice What that could be ?

@OnlineMechanicTips 4 жыл бұрын

Wow, fairly new according to the year..Curious as to what the miles?...O and please give the video a thumbs up and subscribe to the channel for me bud, thanks

@superripp7525 4 жыл бұрын

@@OnlineMechanicTips yeah already subscribe I get your notification every time 28000 miles and I have ripp supercharger on it

@michaelgearhart6685 3 жыл бұрын

Injectors are somewhat noisy and its normal

@beckjmom 3 жыл бұрын

I replaced the rocker arms and lifters on my 2012 Dodge Durango V6. I carefully marked and reinstalled the cam variation sensors. I don't have a scanner. Do I need to do the retrain?

@OnlineMechanicTips 3 жыл бұрын

Yes, it would be wise to relearn cam and crank.

@beckjmom 3 жыл бұрын

@@OnlineMechanicTips will it hurt the car to drive to the dealer to have it done?

@OnlineMechanicTips 3 жыл бұрын

@@beckjmom No it will not. Heres the procedure I do after I do rocker arms. The dealer scan tool can do a cam and crank relearn, it also can do a cam phaser cleaning. If the mechanic nice enuff, he can simply push 1 button and get that done also.

@KensDIYandHowTo 11 ай бұрын

@OnlineMechanicTips why do you need to do that if you haven't changed any of thr positioning and timing? Like if you line everything up like it was why do you have to do a relearn? Please let me know thanks JT your awesome you've helped a lot of us with the 3.6l pentastars out!!!

@uviquel 3 жыл бұрын

How do you replace a rocker arm from the cylinder #1 without remove the time belt? I just replaced the #3 and it was easy, but the #1 is hard cause the camshaft is not lifting when I loose the screws, good video btw

@OnlineMechanicTips 3 жыл бұрын

Thanks for watching bud, I see you are a subscriber, thats whats up..Yes, cyl 1 is the closest to the timing chain. It will be hard to pull that off without removing timing. What kind of car is this?

@uviquel 3 жыл бұрын

@@OnlineMechanicTips it is a Journey 2011, the most difficult for me was to remove the camshaft position sensors cause is so uncomfortable and the harness behind the cover closest to the cabin cause it is hidden behind. The funny part is that after replace it everything was smooth after 2 hrs driving we heard the sound again, now the sound show up when the engine is warmed, I am sure is the #1 cause I felt it loose a littlebit, I didn't replace it cause is close the time chain and we couldn't lift the camshaft.

@Nick912OK 3 жыл бұрын

I have a 2015 jeep 90k miles with a 3.2 terrible tick. I tore it apart and rockers are solid and cams are not damaged at all. I guess that's a good thing but what could cause that noise?

@OnlineMechanicTips 3 жыл бұрын

Thats why its important to really analyze the noise. If you heard a valve train tick, you should find a valve train problem. If not, its something else. Was the noise constant? Also are you subscribed to the channel?

@Nick912OK 3 жыл бұрын

@@OnlineMechanicTips yes subbed for sure man! I found the bad one after I barred the engine over. It was the #2 cylinder of course. I got it out and got it in though. Love your vids

@OnlineMechanicTips 3 жыл бұрын

@@Nick912OK Thats whats up

@Nick912OK 3 жыл бұрын

@@OnlineMechanicTips one more question sir regarding this motor.. I just broke three cam cap bolts with a torque wrench! It said spec is 89 in pounds so I set the wrench to 7.5 ft pound and it is breaking them everytime. Snugged them all in bolt order before to finger tight then got the torque wrench. Are they single use torque to yield? Headed to the dealership tomorrow again ugh

@xhamilton91x 3 жыл бұрын

Isn't there a cam relearn software that needs ran to reprogram the cam?

@OnlineMechanicTips 3 жыл бұрын

Depending on the scan tool you are using, there is a feature that will allow you relearn the cam and crank. Which you should get done after every major repair. Thanks for watching, please thumbs up the video and subscribe to the channel. Thanks

@jasonl7025 3 жыл бұрын

Hi JT: do I need to take spark plugs out to rotate the camshaft?

@OnlineMechanicTips 3 жыл бұрын

No, unless you have the number 1 plug out trying to see if engine up to TDC

@jasonl7025 3 жыл бұрын

@@OnlineMechanicTips Hi JT: appreciate your prompt help. Had some hard time to rotate camshaft through crankshaft last time. I probably didn't apply enough force.

@ulrufe7760 3 жыл бұрын

Can you rotate camshaft with all spark plugs off?

@Troy-McClure81 4 жыл бұрын

Well my 2016 town and country is back at dealership..this time its a failed rocker on cylinder 1 intake,cylinder 2exhaust, both motor mounts are failed,man why me?

@OnlineMechanicTips 4 жыл бұрын

Awhhhh bud, sorry to hear that..

@ChiraqVet 2 жыл бұрын

Fixing to start on my wife's 2012 chrysler town and county, ticking sound that sounds like its in the rear. It started with a misfire code, i replaced spark pkugs an coil packs an the code went away, but the motor started ticking. On the rear do u line up the lines or arrows before tampering with the cam??

@OnlineMechanicTips 2 жыл бұрын

Hey bud if you working on bank 1 then yes, the lines should be lined up. You might want to watch this other video if you plan on removing the cam phasers and the timing chain. Also, are you subscribed to the channel? kzfaq.info/get/bejne/pbt4gZR4t7OnZ4E.html

@ChiraqVet 2 жыл бұрын

@@OnlineMechanicTips yeah I have subscribed days ago. Without your videos i wouldn't feel as confident as i do goin into this. Which Iv done alot of different jobs in auto mechanics but never messed with valvetrains until now. Its intimidating work if you dont understand it. But your videos gave me alot of understand on things I didnt know. Again thank you for that. I try to do my own auto work cause there are so many shady mechanics nowadays, you jus can't trust anyone to do u right.

@OnlineMechanicTips 2 жыл бұрын

@@ChiraqVet lol, I feel you bud. Thanks

@ChiraqVet 2 жыл бұрын

I was really hoping i didnt have to buy anymore tools, but it looks like Im gonna have to get an inch pound torque wrench. I got a foot pound wrench that starts at 10 pounds but thats prolly overkill huh?

@johnnym991 2 жыл бұрын

What are the torque specs on the camshaft holding brackets my man

@OnlineMechanicTips 2 жыл бұрын

kzfaq.info/get/bejne/rt2EbN1nuKidnGQ.html

@julianparrish2222 4 жыл бұрын

I have a 2014 Durango. 3.6. Passenger side rocker failed on intake. The intake came phaser came off in 2 pieces. Also the timing chain tensioner tool fell out. How can I compress the chain again? And is the phaser bad because it came apart.

@OnlineMechanicTips 4 жыл бұрын

Hey bud, im not understanding here. What do you mean the chain tensioner tool fell out? It is usually placed in the correct spot and stays there until removed..O and please like the video and subscribe to the channel. Also yes, that phaser should be replaced if it came apart. Before you comment back, please sub the channel for me

@julianparrish2222 4 жыл бұрын

Ok I subscribed. When pulling the cam it came with it. So that let the tensioner extend. I see that you don’t use the tools anyway. How are you compressing the tensioner

@OnlineMechanicTips 4 жыл бұрын

Ok bud, you can remove the cam/phasers without the tool..but you may need the tool to compress the tension arm back into its bore and use a Granade pin to hold it there..I have a video I'm going to upload tommorro showing how this is done

@julianparrish2222 4 жыл бұрын

Is it the same for driver and passenger side? Mine is the passenger side

@shaunswayne6391 4 жыл бұрын

What size is the socket your turning the crankshaft with?

@someofthissomeofthat6014 Жыл бұрын

1-1/16th

@pnorton75 3 жыл бұрын

Just got my 2015 T&C back from dealer, they replaced bad lifter and camshaft and phaser do to damage from lifter. But it's still making same ticking sound. What gives?

@OnlineMechanicTips 3 жыл бұрын

Well damm, did they inspect the rocker arms? which is usually the problem. O and are you subscribed to the channel, if not, please do. Thanks

@pnorton75 3 жыл бұрын

@@OnlineMechanicTips Wow. Thanks for the quick response. I think i left same comment on some of your other vids to. I would hope so. They said they checked front bank first and found nothing then did back and found the collapsed lifter. Would a stretched timing chain or bad tensioner make a similar sound? Subscribing and liking. Thanks.

@OnlineMechanicTips 3 жыл бұрын

@@pnorton75 Thanks bud. Sure a collapsed lifter will cause a noise, but a rocker arm will also, in fact, so will a cam phaser. (depends on the noise). I dont see any reason one would replace a camshaft because of a failed lifter. One of the coming apart rocker arms likely got by them. There are certain ways to check that and a dealer tech should know all of such ways. To me, none of this matter, seems you should have the option to return the van and get it rechecked because basically, you still have the same problem. Wow, this crazy. You should not be hearing a ticking noise after a ticking repair has just been done.

@pnorton75 3 жыл бұрын

@@OnlineMechanicTips Yes I am taking it back. I had less than 100 miles left on my 100,000 mile max care warranty when i took it in. They said they would leave the ticket open so if i go over the 100,000 before i get it back to them (which i will) it will still be covered. Just glad this tech actually heard the ticking. The first time I took it in a month ago the tech said he didn't hear anything. All depends on the luck of the draw if you get a competent tech or not. Thanks again.

@demetrius1510 4 жыл бұрын

Ive got a 2015 chrysler 300s awd 3.6L and its starting to tick like that is that covered under the power train warranty?

@OnlineMechanicTips 4 жыл бұрын

Hello my friend, it depends on the coverage the car has and the miliage . How many miles on car? O and please like the video and subscribe to the channel for me, thanks

@demetrius1510 4 жыл бұрын

@@OnlineMechanicTips its got 96,000 and I got the 100,000 mile power train warranty and i did i like the videos and subscribed already but thank you for posting them 🙏

@demetrius1510 4 жыл бұрын

@@OnlineMechanicTips also I just installed a throttle body spacer and everytime i make a complete stop my car kinda like shuts off like the rpms will drop but if i come to a stop n it does that of i turn on my a.c while stopped the rpm go back up like it doesnt do it when my a.c if on

@OnlineMechanicTips 4 жыл бұрын

O good, that tick noise should be covered under the powertrain warranty..curious, why the throttle body spacer?

@demetrius1510 4 жыл бұрын

@@OnlineMechanicTips adds extra throttle response I have a cold air intake too

@linternasmx 2 жыл бұрын

Hi. 10:00 What size is that socket? The one you use to rotate engine. Regards.

@OnlineMechanicTips 2 жыл бұрын

Hey bud, I'm sorry I cant remember

@linternasmx 2 жыл бұрын

@@OnlineMechanicTips No problem, is not too hard to find the measure. Regards.

@kastrothetrucker7820 Жыл бұрын

What s that cost at a shop ???

@fernandoecheverry2951 Жыл бұрын

What state u are

@shaunswayne6391 4 жыл бұрын

What size socket is used to turn the crankshaft?

@OnlineMechanicTips 4 жыл бұрын

Hey bud, thats a 1 1/16 socket..Thanks for watching, please like and subscribe to the channel please, thanks

@satt4603 Жыл бұрын

I have a 2015 ram promaster 2500 3.6 v6 vvt, my engine is shot can I swap with a 2016 ram 1500 pickup truck, same camshaft without the vvl ?

@OnlineMechanicTips Жыл бұрын

Not sure thats possible my guy, there was a mid year change but the computer will always be looking for the original equip and standard features.

@satt4603 Жыл бұрын

@@OnlineMechanicTips engine looks the same, camshaft also, I'm not talking about the new camshaft with the 3 lobe

@Chevy-ud1ec 2 жыл бұрын

is there a way to contact you I have a question and I am sure you can help me. THanks Harvey

@OnlineMechanicTips 2 жыл бұрын

Sure bud, its in the description. Also are you subscribed to the channel?

@martin.khachatrian 3 жыл бұрын

Do You rotate the crankshaft on Parking mode ?

@stu3775 2 жыл бұрын

park is fine

@michaelwork5399 2 ай бұрын

What would the drawback be if that cam looked like that and I just put a new rocker arm in it mine got 238k on it or would it hurt anything

@OnlineMechanicTips 2 ай бұрын

What year is ya engine? Also are you subscribed to the channel?

@michaelwork5399 2 ай бұрын

@@OnlineMechanicTips mine is a 2013 3.6 and just subbed!

@OnlineMechanicTips 2 ай бұрын

@michaelwork5399 Hey bud, I re use cams all the time that was damaged. It's really about the center of the lobes. The outter edge of lobes ok to re uses. The center part is what contact the rocker arm. If you mic that lobe and it measures similar to the others, then there's not much draw back

@michaelwork5399 2 ай бұрын

@@OnlineMechanicTips okay so if the center where the roller touch’s is okay then we are good? And the outside edges where the cam touched the side of the rocker doesn’t matter? That’s good to hear lol

@OnlineMechanicTips 2 ай бұрын

@@michaelwork5399 kzfaq.info/get/bejne/arVzY8pkzc6Ucnk.html

@xtremeairbrush5672 Жыл бұрын

Why not put rags in the intake6

@OnlineMechanicTips Жыл бұрын

You should def cover up the intake.

@k9deine351 11 ай бұрын

i have a 2013 charger v6 just started ticking im not changing one rocker im changing all of them

@OnlineMechanicTips 11 ай бұрын

Well thats what you should do dude. I dont believe I suggested that you do just one in this video..

@morrisnkubone2247 Жыл бұрын

Hi how are you, I’m a subscriber to your channel,I’m reside in South Africa and I need you help.I own a dodge Journey R/T 3.6 .Is there a I can get hold of you privately because I need help

@OnlineMechanicTips Жыл бұрын

Info in the description

@morrisnkubone2247 Жыл бұрын

@@OnlineMechanicTips JT I need to source parts,rocker arm and lifters and also the timing kit

@missingsolez6308 3 жыл бұрын

Where are you located? i need this done

@OnlineMechanicTips 3 жыл бұрын

Hey bud, sorry, we in the Atlanta Ga area.

@gabrielmerza6904 3 жыл бұрын

My 2013 Chrysler 200 start doing the ticking noise at 150k miles

@brennishiabouie7853 3 жыл бұрын

What's your location I need you to fix mines asap

@OnlineMechanicTips 3 жыл бұрын

Hello my friend, we in the Atlanta Ga area in Snellville. If you in the area, please give us a call, thanks

@roylee5372 3 жыл бұрын

We're is your shop located.

@OnlineMechanicTips 3 жыл бұрын

We work out of Snellville Ga bud. Brothers Motors

@gmelody14 2 жыл бұрын

Too much knowledge In this video….very valuable info here

@OnlineMechanicTips 2 жыл бұрын

Glad it was helpful!

@samlouis1852 3 жыл бұрын

I failed to find the bad rocker arm cz I didn’t rotate the engine,I have to redo it again

@OnlineMechanicTips 3 жыл бұрын

Yes, do all checks with lobes pointing up..Thanks for watching, please subscribe to the channel for me, thanks.

@samlouis1852 3 жыл бұрын

@@OnlineMechanicTips will do thanks for the great video,will update the results later.

@MyRebel44 Жыл бұрын

Has this problem been fixed by the manufacturer, in the 2022 ?

@OnlineMechanicTips Жыл бұрын

O yes, this problem long gone in 2022 my friend

@MyRebel44 Жыл бұрын

@@OnlineMechanicTips thank you

@OnlineMechanicTips Жыл бұрын

@@MyRebel44 Thanks for watching. Please thumbs up the video and consider subscribing to the channel. Thanks

@MyRebel44 Жыл бұрын

@@OnlineMechanicTipsI just did ,thanks for all the information.

@MyRebel44 Жыл бұрын

I just bought a 2022 jeep Cherokee Trailhawk, it has 4500 miles and the oil has been changed twice.I had it changed at 1000 miles , and the dealer put the wrong oil in they used semi synthetic 5w 20, and the book calls for full synthetic.I called them out on it so they told me to come back and get it changed again. You have to watch some of these places. I plan on doing 5000 mile oil changes.

@Bobbyg408 Жыл бұрын

yo my man where you out of and how much you charge for a job like this?

@OnlineMechanicTips Жыл бұрын

Awh man we in the ATL area and we have a 1k plus parts special goning on this month fir ticker jobs

@Bobbyg408 Жыл бұрын

@@OnlineMechanicTips man you way out there, I’m out here in cali but shit ima have to keep watching your videos and apply the knowledge, love the videos on these grand Cherokees , keep it going 💯

@OnlineMechanicTips Жыл бұрын

@@Bobbyg408 Thanks my guy

@dwayneturner1722 4 жыл бұрын

JT mane my air bag light came on what could I do to save money

@dwayneturner1722 4 жыл бұрын

On my 09 Dodge journey

@OnlineMechanicTips 4 жыл бұрын

Awh man, thing about air bags are when the light on theres really a problem..You cant do anything until you find out the code..Have you gotten your airbag recalls done yet?

@dwayneturner1722 4 жыл бұрын

Did they have a airbag recall

@dwayneturner1722 4 жыл бұрын

@@OnlineMechanicTips how could I check and find out

@OnlineMechanicTips 4 жыл бұрын

@@dwayneturner1722 Yes, we had to replace all the airbag modules on most of that body style, not sure if yours been done yet.

@TheSWADE247 Жыл бұрын

were u loacted at bro

@ynotdoityourself3288 2 жыл бұрын

I need for a 2.7L

@OnlineMechanicTips 2 жыл бұрын

You need what for a 2.7?

@darrellmcneill9491 2 жыл бұрын

Need this done to my 2014 town and country- mechanic pg county md hit me

@lifewithsindi4095 2 жыл бұрын

i own a jeep 2016 i am having this issue

@lifewithsindi4095 2 жыл бұрын

i took it to autozone

@OnlineMechanicTips 2 жыл бұрын

O no, is your Jeep ticking loud? Also are you subscribed to the channel bud?

@carrepairtechnician362 Жыл бұрын

Chrysler misfire problem

@stu3775 2 жыл бұрын

how about that, patented field testing, lol

@MrMarcus5191 2 жыл бұрын

please....please.....stuff some rags into the intake ports.....!

@OnlineMechanicTips 2 жыл бұрын

I surely hope you got more out of this video than just noticing that there was no rags in the intake? But thanks for watching bud.

@MrMarcus5191 2 жыл бұрын

@@OnlineMechanicTips Fond memories of Rick with his 911....dropped a brass ( non magnetic ) nut clean down into the cylinder past an open intake valve....

@OnlineMechanicTips 2 жыл бұрын

@@MrMarcus5191 lol, o wow, yes that will stick with you for awhile I guess..It certainly a good practice to cover the intake and plenium thats for sure.

@anthonyboggan6930 3 жыл бұрын

Tried it and it didn't work

@OnlineMechanicTips 3 жыл бұрын

Hey bud, what exactly are you referring to? Also are you subscribed to the channel?

@anthonyboggan6930 3 жыл бұрын

Using the 3.6L vvt timing tool to remove the cam phasers & push the tensioner back to give chain slack to be able to pull the cams out to change the roller rockers and the hydraulic push rods

@jasonl7025 3 жыл бұрын

Hi JT: appreciated your tips and help on how to replace rocker arm on cylinder 1. BTW, my rocker arm was so bad and it failed in all your diagnosis methods. The roller on the rocker arm is stuck and won't move anymore. kzfaq.info/get/bejne/greEiZN5uajTeqM.html

@OnlineMechanicTips 3 жыл бұрын

O wow, I see the grind on the camshaft lobe. Did you replace the camshaft?

@jasonl7025 3 жыл бұрын

@@OnlineMechanicTips didn't replace the camshaft since that is beyond what I can do. The car is aging and don't have the money to throw in anymore. Checked with two local shop about the noise, they told me to live with it. Man, they really insult the word mechanics.