If you liked the video, please *hit the thumbs up* . Your support helps is greatly appreciated! *NOTE 1: A Lot of parts in the dryer are are sharp, especially panel edges!* *NOTE 2: When re-installing the Drum, avoid touching/bending the electrical connectors on the right side heater element.* Keep belt & drum away from the connectors when re-installing. *Note 3: The water hookup is to the COLD water, not hot.* I also have a *How To Replace a Dishwasher* Video: kzfaq.info/get/bejne/eZ9kdbV7u-Cngmw.html

Thank you for the great step by step video. Sears wanted 500 bucks to fix the dryer. I needed the 17 mm socket wrench which I got for 3 bucks and the kit from Amazon was 35, and 3 hours of my time ( I’m slow at age 73) but got it done thanks to you.

Fantastic step-by-step instruction! A repair guy charged me $180 only to tell me we needed to “load less clothes.” I now realize he was just lazy. Last Friday my wife told me to go to Lowe’s and buy a new one. I found this video while sitting in the parking lot, saved me at least $800. Thank you!

This video is spot on! My dad and I worked on this together and got it done. Directions were very clear and I feel accomplished getting this done. Be careful of the edges, they are sharp. Check the direction of the spring before you take it out. We confused ourselves a couple of times. That front panel clips were stuck and hard to remove so make sure not to break them. Getting that right back roller off was hard because of how it’s situated but watching the video and how he angled his tool in the back was helpful. Thank YOU for this video. I had a technician quote me $400 ($230 for the kit) to repair so I decided I was going to just buy a dryer until someone told me to check KZfaq for videos to see if we could work through this instead of buying one. Thank You! Money well saved!

This is by far the best instructional video for repair I have watched on KZfaq. Thank you for showing the step by step process.

THANK YOU SO MUCH. 2 hours and $40 and we’re back in business! Very helpful. Step by step instructions were spot on.

Today I fixed my dryer myself! In my case, the dryer turned on and heated, but the drum would not spin. The belt was broken. I watched this informative video twice and decided to try to make the repair myself. A kit was purchased from Amazon for $35 which contained more parts than I needed. Turned out the rollers did not need to be replaced. At each step, I watched the video and then completed the step myself. I thought the drum would be heavy, but it was very lightweight. Instead of sliding the belt on the drum after positioning the belt on the pully, I followed a recommendation from another KZfaqr named 'wagslick' and went in from the back. It was super easy. Thank you so much for the well-produced video. It saved me lots of money, and I can now add 'appliance repair technician' to my resume. Ha!

Flawless video. Absolutely perfect. I hope you’ve got affiliate links set up for that repair kit, and if so enjoy the commission. It was well earned. Two rollers and the pulley were what was making mine squeal like a banshee. Took me ~1 hour. Thanks so much👍🏻👍🏻

Your video was a big help. Would like to make a few suggestions. 1. With the drum out, it might be a good idea to replace the heating element and sensors. Much easier with the drum out. 2. With the drum out, vacuum and clean as much as you can. Try vacuuming the motor coils also. I had a lot of lint buildup and the motor does get hot. 3. Before pulling out the drum, mark on the drum “Front” and “Back”. I pulled mine out and didn’t pay any attention. Marking the drum would have made it easier to put back. 4. I have a photographic memory with no film. I took pictures of the wire connections for my records. 5. After installing the drum and before reinstalling the duct outlet on the motor, turn by hand the motor fan. If the drum turns easily then the belt is installed properly. Hope this helps. 2:21

Thank you so much Ordered kit from Amazon (get the upgraded version) and changed everything Tip 1). Be careful taking control panel off I broke two plastic tabs but it still went back on ok and tight Tip 2) - put screws on separate pieces of paper with descriptions of the parts they go with 3) to put the belt on the tensioner Do it the way you did it but do it from back of dryer - was quick and easy Saved me spending $1,000 for a new one So very much appreciated

God bless you!! The repairman was booked 4 days out and the laundry was piling up. I overhauled my entire dryer with a $35 kit from Amazon. You saved me $200+ and a trip to the laundry mat.

My dryer used to sound like it was about to launch to space. Bought the repair kit off Amazon and used your video for the disassemble, replacing the parts and reassemble. It saved a lot of time and $$. Thank you for the great video and instructions.

Fantastic video. Step-by-step instructions that were so easy to follow. Made what appeared to be a daunting maintenance activity really easy. I was really afraid I was going to struggle getting the drum back in, but, with a bit of patience, was not all that difficult. Thank you for taking the time to help so many others.

This is the best Samsung dryer disassembly video on KZfaq. I used it in July 2022 to replace the roller wheels and idler pulley, and in Dec 2023 to replace the heating element. No-pro tip: Use a trigger clamp to hold the idler pulley under tension to slip the belt on one handed. Remove the trigger clamp before installing the front bulkhead.

I wanted to let you know thank you for the video. It helped me so much. I bought a complete tune up package from Amazon . I had broken wheels , belt was all cracked about to rip and the tension wheel was broken off. I followed your steps and now runs like a champ. My dryer is 13 years old . Thanks once again.

Best how to video I've ever used. Your instructions were on point. Easy to follow and your break down was perfect. Thank you so much. If you have a Samsung dryer that needs repaired this is the one to watch. I'd like to state that during the rear bulk rollers were a pain to take off. I had to take out the rear drum brace to get mine off. I watched another video to disconnect my steam sprayer and had to get it from the back all but 1 roller wouldn't come off so I resorted to taking it off. But used this video from start to finish. You saved me about $200. Thanks man. Appreciate it. Keep making more videos!

Amazing video! This was the exact issue my dryer was having. It was going to be a two week wait for a repair tech so I called around for parts - which were going to cost over $300! I came across your video and ordered a parts kit off of Amazon for $59.99 (CDN). Thanks to your easy to follow steps I now have a dryer that’s working like new!!!

Still so helpful 5 years later, you saved me buying a new dryer, thank you!

Appliance repair people refused to service my dryer because it was stacked in a closet. With your video and a $36 tensioner & belt, I did it without even taking the unit out of the closet! Thanks for this awesome video, you're a lifesaver.

This is it!! You my friend, saved me. I ordered the parts, got super frustrated at putting the belt back on,, and fixed my dryer. Last dude charged me $340. I did this in an evening. Buy a friend a beer and have them help. You don't need them that much but it will help with the belt.

Just repaired last night step by step thank you! I had to use a flat metal tree support to reach and dislodge the control panel and also unscrewed the back of the dryer off to make it easier to change the rollers. Without this video I'd call a repairman or buy a new one so thank you!!

Just letting you know people are still getting use out of this video! Just finished replacing my belt and it runs like a dream now. Thank you - I used your links to get the parts 👍

Thank you, I have never done a repair and replacement of parts to any equipment but by following your video I was able to fix the noisy dryer, really appreciate your great work. You saved me couple of hundreds and have sense of satisfaction by fixing it. The edges of the panels are sharp and need to be really careful, THANK YOU SO MUCH 😊

Just fixed my dryer with this helpful tutorial and the recommended kit from Amazon, whisper quiet now!!! Thank you so much! Took me 2 hours and 1 cut on my pinky finger, lol.

Amazing video, helped me repair our noisy dryer for the cost of the repair kit and a new wrench set. The tensioner was the squeaky culprit for us, but I replaced everything that came in the kit. Couple of points for others attempting the repair - it's possible to do this without unstacking the dryer if you have it stacked, actually might have made it easier. Also, check the belt orientation - I did this wrong (ribbed side of belt should be on the inside, facing the drum, with the ribs catching on the motor rod) when I tried, the smooth side of the belt slipped and the motor wouldn't spin the drum.

Great video! Thank you! The rear rollers and the tensioner pulley were the source of my squeaks. Some of my bolts and clips were a little harder to take off than it appeared in the video, and I would recommend using gloves of some sort. The sheet metal inside is similar to a razor’s edge. I have a few cuts on my hands and I may have cursed a couple of times, but there was something about the way you talked that soothed me back to sanity. Thank you again. $33 repair kit on Amazon and about two hours is what it took me.

2 hours, top to bottom, with tablet running this video nearby - awesome instructions. I also appreciate the calm and steady demeanor and clear video. My dryer was a different model but close enough - and I plan to follow this channel from now on. Great job!

The removable panel wheels were tough to undo but a lil wd 40 helped, the belt is a pain in the ass but I kept doing it until I got it. Dryer is smooth as new. Thank you.

Absolute Legend! No extra nonsense and great details. Super helpful. Really appreciate you making this.

I want to thank you for putting this together, my dryer was making a banging noise and I searched and ordered parts and then found your video and was glad to see you had the same parts. Followed all your steps and was able to do this all by myself. Thank you!

Thanks for the great step by step video.....was able to take the squeak out of ours by oiling up the roller spindles and tensioner bushing. Also note....the tin on the top ledge of the door is razor sharp so be careful

Thank you for such an incredibly informative video! Was quoted $250-$300 CDN for the fix but ended up spending $40 for the Drum rollers, ultimately only needed 1 but didn’t want to chance it and changed all 4! Thank you thank you !!!!

Brother, I can’t say “THANK YOU” enough! Such an incredible video, with great detailed instructions and fantastic filming. You saved me a few hundred bucks and it only took a couple hours to fix. Thanks again!

I do not know your name but let me thank you. I follow your instructions, changed a bad roller and so far the dryer runs smooth. The most complicated part was to install the new tension pulley and the band because in my dryer you cannot uninstall the back. Thank you again.

Thank you for your instructional video, I used it to fix my Samsung dryer after tying to find repairman in my area with no luck. It took me just over an hour to complete, and my husband was shocked that I did they entire repair by myself thanks to your video.

Great video. Watched step by step. With my wife working on the top side me work on the bottom completed the job at a slow and easy pace in less than an hour and a half. My wife just pointed we are talking about fixing the dryer. Lol. And boy are we tired

Thank you very much for your step-by-step details and advice as you made you presentations i replace exactly the kit except thw spring. You helped me saved from paying someone to do it by an appliance repair company could have cost hundreds. And maybe close to a thousand if I Had to buy a new dryer. 👍🏼 👍🏼

Thank you so much for this incredibly detailed, easy to follow tutorial. We were able to follow along and replace the parts ourselves, saving hundreds of dollars. You are awesome!!

Although there were a couple of differences with my dryer, I was able to take it apart and check all of the likely problem spots. It turned out that the blower fan was caked with lint and I think that was the source of the noise. A thorough cleaning followed and it seems that all is well once again. Thank you for your video. It was surprisingly easy to take all apart and re-assemble. I shudder to think what it would have cost me to get a repair man in.

Aboslutely the best detailed "how to" video I have ever watched. Thank you!

Thanks to this awesome step by step video (take apart and put together) i was confident enough to take upon this task and just finished installing the parts. Everything works A1! Thx ( I feel like a donation for your assistance is in order) you saved me $$$

Thank you so much for your step-by-step instructions! For $37 and a couple of hours we fixed my dryer. I almost scrapped it by you saved me. Again, thanks!

Thank You is all I have to say for this video. Not only for making this video, but how detailed the video is and the fact that you have also included a list of parts that you used, which is I was able to cross reference and make sure they fit my model dryer as well. Took me about $40 or so dollars in parts and less than 3 hours for disassemble, cleaning, repair and reassemble. Thank You again!!!

Best step by step tutorial of any video. 👍🏾👍🏾

Thanks so much. One of the best repair videos I’ve ever seen. The instructions were easy to understand, very complete, the camera-work was excellent. The only time I got in trouble was when I forgot to follow your instruction (drum orientation, tensioner spring). The replacement wheels had a different sized nut from the OEM wheels but otherwise was exactly as you described. Thanks again.

OMG!! My dryer was squeaking and we called a dryer repairman, who said he would NOT work on Samsung dryers. Ours was only 4yrs old and one company said it would be $300-400 to fix it. My husband wanted to put it on the curb. I ordered a repair kit from Amazon and followed the instructions on this video. How awesome! I fixed it my self! This video is perfect for doing this! I only had 3 screws left over but it runs perfectly! Now wonder where those screws went??

Great video!! I just fixed my dryer and watched your video step by step. Thank You!!

Thank you for your detailed instructions to tackle this job. It took me about 5-6 hours with a few breaks to put bandages on when I'd cut my finger on the cheap sheet metal. I can't believe a $2000 washer/dryer is a piece of crap.

My dryer just started making noise so I decided to order the repair kit before puling it apart. Thank you for such an excellent video!

The real acid test of this video, is whether or not a klutz like me could complete this job, and thank you I did. Nice work on the video!

Good video. I actually replaced only the bearings, £1.50 per bearing against £27 for samsung roller assembly. No brainer. 🙂

Thank you for your detailed video. I used your link to buy a new tension pulley (my one had cracked and broken off). I followed along with your video and had my dryer up and running like new!

Just want to say thank you for making such a smooth easy to follow guide to changing these out. It took me no time at all to take apart but mannnnnn those roller nuts are rough, at one point I almost just left the back ones because I found my tensioner pulley was the cause but finally got the back rollers and took about a hour and a half start to finish. Cheers!

Thank you so much for the great video. We have the same model as you do and we just finished changing the rollers and belt/tensioner etc. Of note: The nuts that came with the new rollers are 9/16, not 17mm and the threads are different on the new rollers. Everything else worked fine. The front rollers are fine, just the back rollers were shredded. Thanks again!

Thank you so much for posting this video. It was very clear and helped me save hundreds of dollars by repairing my dryer myself.

This video is much appreciated! Got the ol dryer back up and a running, thanks very much!

Thanks so much. One of the best repair videos I’ve ever seen. The instructions were easy to understand, very complete, the camera-work was excellent.

Excellent video. This and $50 on Amazon for parts and my dryer is super quiet again. Medium difficulty on the rear roller replacement and reinstalling the belt/drum.

Your instructional video saved me $350!! Thank you for such a detailed video you made the repair very easy!!

Thank you for this video. I was able to fix my dryer and save getting a new one.

Wow! the hubs and I repaired our dryer....we could not have done it without this video. the instructions were excellent! i'm a subscriber now! you saved us a lot of money. thank you!

Thank you !!! ... Your video was great , ordered the parts ($37), Amazon delivered overnight, got if fix next day ! ... You Rock !

woohoo! My dryer is not squealing any longer, thank you very much for the detailed video.

This was absolutely the best video I have ever seen for doing a project on youtube!!!

Thank you very much brother we fixed it just trusted your instructions step by step and we made it. How did you even do that single handedly such a great talent.

Great video. Excellent camera angles and close-ups. I ordered the replacement kit you linked to. However, I had an awkward experience of trying to get the rollers on, using the technique you suggested, by holding the nut and washer in place first. Unfortunately, the replacement kit has changed the nut size (now a 14mm nut) and the thread size is different (the original 17mm nut would not thread the new spindle.) So, it was difficult to get the nuts on the bolts for the rear rollers. Furthermore, I did the work on a stacked dryer, and did not have the extra hands to get it unstacked for this job. Getting access from the back would have helped me. Also, I saw another video on replacing the belt, in which they placed the new belt on the drum before re-installing. Then they showed how to "blind" thread the belt onto the motor and the tensioner. Much easier I think. Thanks again for the $$ saving video.

I have the same model and the steps were 100% accurate, thank You

Thank you for the content! This helped me fix our dryer and saved my family some serious $$$.

Had to replace the drum wrapper in our DVE45M5500P/A# dryer. This video was incredibly helpful with the step-by-step instructions to take the dryer apart. THANK YOU!

Excellent video. Just did my dryer and your instructions were spot on. Thank you.

Thank you very much for taking the time to make such a well detailed vidéo. I never would have thought that I would be able to fix it myself, yet I did by following your video. One point I really like is all the "don't forget to..." which I would have forgotten if not for that mention. One tip for the others, clearly identify which screws came from which part. I took it apart, then order the parts and waited a few days before reinstalling it. Good thing that my wife made me put the screws in many well identified bags.

This video was unbelievably helpful! I tried watching 3 other similar videos, and this was by far the easiest to follow. This took me exactly 3 hours, but I would have been done quicker if I wouldn’t have dropped the final screw for the front panel into the dryer right before finishing. Haha Local appliance company wanted $180 just to come out and look at it. Highly recommend just using this video!

Thank you Man for posting this it helps a lot.i did mine today and its working now.i forgot that there is a different screw that came with the roller,i have to change the old screw coz its not compatible with the new roller.otherwise its amazing.i did not pay somebody,only 50 cad for the parts from Amazon.and its very rewarding to DIY.thanks so much

Great video fixed the issue with grinding screeching sound I was getting, very clear and methodical step by step how to solve dryer, nicely done and thanks so much saved a few hundred bucks $ cheers 😎👍

We followed the steps - great pictures and instructions! The idler was shot and one wheel not running smoothly (we changed them all). We put the dryer back together, all went well. Our dryer has a wobble now - any suggests. Feet all appear level and in good shape.

Great step by step video. This was very helpful and easy to follow. Saved me a repair call and I learned something along the way. Thanks!

Absolutely perfect repair video! Saved buying another dryer...just $26 for the roller kit. Thx!!!

Use DIY videos all the time, this was one of the best!

Saved me probably $200+. Thank’s for the guide!

My dryer starting making a squeaking noise and was annoying the house. Thank you for this video. I got it fixed....it was one of the front wheels that went bad. I couldn't get the back two off so I gave up. I hit them both with some WD-40 and they were spinning just fine. Plugged up the dryer after putting it back together and the squeaking noise was gone.

Awesome details Sir !!! Wife and I did it together in a couple hours. Yay !!!

Excellent video - everything was spot on and helped my wife and I with this job. Thanks!

Perfect! I had debris in my cage fan and i used this video to tear apart my dryer! Thanks!

This was one of the best instructional videos I have ever seen. Great Job!

this helped me out so much, i really appreciate the time you took to make this video. this is exactly the issue with mine

Great and helpful video. A couple of notes for the bros based on my experience: 1) wear gloves. Foolishly cut myself multiple times on the stamped metal unnecessarily. 2) my back bears were on so tight there was no way to do it with the method shown. I had to remove the rear panel as well.

I have never worked on a dryer and mine is about identical to this one. I searched and figured the belt broke. I ordered the kit with rollers, pulleys, belt.... using electric screwdriver, it's an easy job. It took about 40 minutes from start to finish.

Thanks for the video! $30 and an hour later and my dryer is like new. Great video!

Awesome step by step tutorial! Thank you so much!!!! This helped out substantially!!! Incredible.

Thanks man I fixed my dryer for like $35 bucks. 🤘🏽🤘🏽🤘🏽

Wow, I followed your video and fixed my dryer. Saved some $$$$ too. Thank you for making such a great video.

Awesome video, straightforward instructions. Thanks for posting!

Awesome thank you so much these instructions were great. Just a note for others if you don’t have the 17mm flat wrench I was able to just loosen the wheels from the front with the adjustable wrench without holding it at the back, this may not always work I’m guessing if the nut somehow spins. Still need to get your hand back there to hold the nut after.

Well done and right to the point. Very well scripted and easy listening voice. Thank you, Mike

Thank you so much for this video, my husband and I were able to fix the squeaking noise in our dryer with your help! Thank you for making this video! 🙏🏽

Thank you so much for this precise step by step. You saved me a huge headache!

The best step by step video. Thanks

Great video! Dryer is working great now when it was screeching like a demon before! $57.77 for the repair kit from Amazon sure beats buying a new unit!

Thanks for your comprehensive video. First video that showed me I do not have to move the dryer to expose the back screws by using a 17mm wrench to hold the rear roller nuts.

Thanks very much for posting this! Followed your excellent instructions and got my pulley and one busted roller fixed up in no time. Greatly appreciated!