How To Install Parking Radar Sensor System
Рет қаралды 823,823
6 жыл бұрынPurchase 4 Sensors Parking Radar System: choose the color for your car
US: amzn.to/2iMbyHf
CDN: amzn.to/2KWdkTo
Car Panel Removal Tools Kit 18pcs
US: amzn.to/2KO7688
CDN: amzn.to/2YLH3bz
Angled Push Pin Pliers
US: amzn.to/31ClCGT
CDN: amzn.to/2H8lKpN
DEWALT DWARA100 Right Angle Attachment
US: amzn.to/2Vmthpe
CDN: amzn.to/2nAvlPo
Angled Push Pin Pliers
US: amzn.to/31ClCGT
CDN: amzn.to/2H8lKpN
Professional Wire Stripper
US: amzn.to/2REssbn
CDN: amzn.to/2lRA1jr
Klein Tools Single Pull Wire Stripper
US: amzn.to/2Rw63ga
CDN: amzn.to/2nBl7OI
Channellock 909 Wire Crimping Tool
US: amzn.to/2xzGDFa
CDN: amzn.to/2m7qAfN
100-Piece Magnetic Screwdriver Set with Rack
US: amzn.to/2XBN19t
CDN: amzn.to/2m3qw0o
Wire T-Tap Connectors
US: amzn.to/2H6z3ai
CDN: amzn.to/31GdQvL
200 PCS Insulated Wire Butt Splice Terminals
US: amzn.to/2NZ3MdK
CDN: amzn.to/2mXHCgq
============
NOTE:
The sensor wire is 8' long (connecting to the controller box).
The display module wire is 16' long.
===========
Features:
- Perfectly fit your car with universal hole saw
- Beep sound warning will be more frequent when distance is getting closer
- Multi Color to Select (Black/Red/Grey/White/Fiat Red/Champagne/Blue).
- 4 x Weather Proof Sensors + LED Distance Display.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
www.ptreon.com/dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
@andreamiller718 Жыл бұрын
This was such a great instructional video! You did an absolute superb job explaining and showing everything clearly! Very much appreciated!!! Kudos to you!!
@tonynovosel3237 2 жыл бұрын
ill be doing this installation on the exact same vehicle tomorrow and before watching this video was not confident....however NOW! after watching your very detailed instructional video im full off confidence and would like to say....THANKYOU VERY MUCH FOR A VERY GOOD DISCRIPTIONAL VIDEO!!!!
@biribiri4400 4 жыл бұрын
Can't thank you enough for this! I just bought a 2000 Honda Accord with a dead reverse sensor. Planning to add an aftermarket reverse sensor and the one that you showed fit the bill!
@rafbay5015 4 жыл бұрын
Best DYS video ever, well done and totally straight through - 20/20
@ASURAN24 2 жыл бұрын
Thanks for showing the green line. It helps with my reverse parking assist project with my Prius C!
@pickeyism 2 жыл бұрын
Thanks for sharing! Well said “the toughest part of installation is drilling holes to bumper”. 😂
@sushh1 5 жыл бұрын
You are very good at making instructional videos.
@robinsingh6296 3 жыл бұрын
You made it look so easy. Cheers!
@animatedmovie7266 4 жыл бұрын
Very well explained, thank you
@iainhogg9830 3 жыл бұрын
Well done mate, great description
@woodstockadam172 3 жыл бұрын
I love a well done video. Keep up the good work!
@Jubjubz-le6bg 23 күн бұрын
Best DIY video on this subject man, made me confident enough to start my install👍🏼
@dial2fast 21 күн бұрын
Great to hear!
@catoercb 4 жыл бұрын
Thank you. I'm planning to install one this week. Unlike your bumper which the installation cables are securely placed inside bumper assembly. Mine seems exposed to the bottom. I think I should have the cables wraped with something. BTW where do you put the beeper? I found mine when I put on the test the sound is extremely loud and a bit annoying. Did you put additional cover on it?
@stevebutler7346 2 жыл бұрын
Great idea putting sensor at the rear so it can seen from rear view mirror ALSO Saves a lot of time and faffing about Tracing the cable to the front on the car Many Thanks Very Clear explanations Steve Butler UK
@duranguense9184 2 жыл бұрын
Yea but now is not abcd because went You turn is Goint to be dcba
@joseanderson-cuff6491 Жыл бұрын
Excellent video, well edited and informative.
@rodovikusa9348 4 жыл бұрын
thanks my brother very useful video, I will get for my car for sure, I will make a video too, installing it to motivate others and stop damaging cars around.
@fotomedia1 4 жыл бұрын
2002-2004 Honda Odyssey rear sensor Installation is a little more tricky but still similar to the one in this video. When drilling your holes for the sensors you'll need to avoid the inner reinforcement steel beam directly behind the plastic bumper. There's no need to remove the rear bumper completely but I highly recommend to at least peel back the plastic bumper by not removing the bottom underneath fasteners so you can see where the holes can be drilled, . The two center #2 & #3 sensors will end up being a little further apart than recommended about 27 inches apart . The two outer sensors #1 & #4 on both ends won't be a problem to clear of the inner steel enforcement. Also, the back-up light on the older Odyssey models is in the lift gate so it's going to require some extra wire fishing to get the wires to the inside of the Driver's quarter panel. Be expecting to take a good afternoon to complete the job.
@JavaManRules 6 жыл бұрын
Very good video... Greetings from Auburn GA (Gwinnett County)
@dial2fast 6 жыл бұрын
Thank you Tim. You have a wonderful holiday and stay warm in this cold and cloudy weather.
@juliusscudamore2324 4 жыл бұрын
excellent video, very clearly explained
@pavittarsingh8140 2 жыл бұрын
You done very professionally work thank you your video Mack my work so easy for my sprinter van
@fotomedia1 4 жыл бұрын
How much clearance do you need behind the plastic bumper for the sensors? My rear bumper cover doesn't seem to have much room behind it to install the sensors because of the steel support so close. Is the kit drill bit strong enough to drill holes in the metal as well?
@zulfikranzulmos4066 6 жыл бұрын
This video so satisfying.. My reverse light not working and also reverse sensor.. It was due to a bad reverse switch..
@user-id1jd9uc4f 5 жыл бұрын
Hi Thanks for the video, Would you please write me the measures on the Chrysler Voyager. Thanks again for your efforts
@YourHomeTorontoRealEstate 2 жыл бұрын
This is really my favourite Channel! Thanks for your nice Videos, it is very enlightening, Waiting for your latest update. Dunlop Park
@QTC7 6 жыл бұрын
Great job.
@PauonYT 9 ай бұрын
Bro thanks for this tutorial! Masha Allah!
@matermark 3 жыл бұрын
Thanks for the video. Didn't you mount the display upside-down? It has numbers to read the distance... I bought an 8-sensor kit on Amazon for under $30 I think, didn't install it yet...I may mount the display on top of the dash or on the sun visor edge where I can fold it down a couple inches to view it. It is for front & rear. I bought a GMC Envoy XUV, the model that the rear opens up like a Chevy Avalanche, and I'm stumped where to put the box and wiring---I can't think where to run the wires, I may need to run them under the vehicle because the cargo area gets hosed out and there's a divider wall with electric window behind the rear seats sealing the cargo area from the passenger area; it also folds down if I want to haul sheets of plywood. I also bought a dashcam that came with a rear camera and---same story---stuck on where to mount it and run the wiring. I can't do a license mount because the tailgate has an electric window and opens both down like a pickup and also hinges to open like old Ford station wagons...besides, my license plate mounting only has bottom holes. May need to mount next to hitch receiver... but maybe seeing I need to remove rear bumper, I can mount it centered in the bumper with the sensors while I have it off...Thanks again.
@maartenyzer4121 6 жыл бұрын
Nice job..
@Fag720 3 жыл бұрын
Great video. Thanks
@352lambo 6 жыл бұрын
Very helpful video!! I think you should epoxy between the sensor and bumper just incase the sensor goes bad from water damage over time
@MrRangerZr1 6 жыл бұрын
No it won't get damaged by water like that. Gluing it would mean you can never removing it. Say you bump into something or the sensor goes bad, you won't be able to replace the sensor.
@sercanerol509 4 жыл бұрын
Great work thanks for the sharing ☺👍my car censor all ready broken and not functioning anymore 😞I don't think so I'm brave and capable for fix that
@paulopereira8984 5 жыл бұрын
can i connect a normal parking sensor device in to a bmw e87 canbus car sistem
@selly1926 5 ай бұрын
Exelente muchas gracias por tu gran explicación.. gracias
@jesusherrera342 Жыл бұрын
Great video!!!!
@zulfikranzulmos4066 6 жыл бұрын
Is the monitor upside down? Was it meant to install on the dashboard?
@adnanaslam9138 5 жыл бұрын
Nice job
@hadireg 3 жыл бұрын
good job!
@vitoripca6181 4 ай бұрын
Thanks 👍
@montylabana8367 4 жыл бұрын
Thanks!!
@cuvame 3 жыл бұрын
Could I buy another 2 extra sensors and just tap them to 2 of the sensors that is connected to the module? I plan to put the extra 2 in the font bumper
@elyzensshuffledancemix2095 Жыл бұрын
I just bought an opel astra j sports tourer with the exact system installed, second hand car, the wiring seems legit, still no impute on the panel, maybe it got the source miss locked or maybe the on/off panel button(that's missing) it's locked on off position? Any ideea on how to eventually bypass the missing button and give activation imput to the panel?
@newyorkerinct2821 6 жыл бұрын
Good video
@fabiobarbosa2146 4 жыл бұрын
PARABÉNS VC ENSINAR MUITO BEM PARABÉNS
@MrRangerZr1 6 жыл бұрын
Just Installed this kit on my van.
@dial2fast 6 жыл бұрын
Wow, that's fast. Glad you got yours done.
@MrRangerZr1 6 жыл бұрын
Yeah got it on sunday, finished it monday. Very straight forward, thanks to your video. You don't have to splice into the reserve light bulb, just splice into the factory back up sensor plug like you showed.
@jlowe1463 5 жыл бұрын
Very well made video, thank you for showing all the details. I'm fed up with videos made with one hand holding the camera while trying to do the work with the other. Questions: so the power is connected to backup light power source so when it is in reverse gear the sensor will function. What about the last part of the video? You approached the back of the vehicle and the alarm sounds. Was the engine on then? I'm assuming so cause when you're in a parking lot and trying to backup(even before gearing to reverse) you want to know if there are cars or people coming from the other direction. And you don't want the sensors on when the vehicle is quietly parked in your garage or a parking space.
@dial2fast 5 жыл бұрын
That last part of the testing is with car running and gear in reverse. The backup sensors only come on when gear in reverse. It does not come on when you have it park or drive. This is same as how a factory system work.
@DiogoFilipeR 3 ай бұрын
if you install it upside down isn't the direction wrong? or you can set it correctly after?
@Sami-bc9iv 4 жыл бұрын
good job.
@davidgg90 6 жыл бұрын
Nice car by the way
@dennismercer3368 6 жыл бұрын
David g mp
@66e2aa2ca9 2 жыл бұрын
2:23 What's the name of the tool that brings the rotational power from the drill to the narrow space?
@abdihassanabdi2881 4 жыл бұрын
Well done 👍 and I have some questions did you choices the ABCD or Because I buy now with 8 Sensor and it doesn’t have ABCD should I choose the The ABCD
@dial2fast 4 жыл бұрын
Most of the kits are labeled already. If not, just plug it in one at a time and keep them in order.
@mpcp27 4 жыл бұрын
Hey when you installed the new parking sensors, did you put a bead of enteringsilicone on the inside around the sensor to prevent water entering or it's not necessary?
@dial2fast 4 жыл бұрын
Not necessary. Behind the bumper is also exposed to the element and gets wet and dirt.
@alimjafari5624 Ай бұрын
Thanks
@real.d3no682 2 жыл бұрын
How can my you tell the front versus the back ? If you want sensors in the front and the back ?
@weepingangel6805 Жыл бұрын
Thank you. I am installing 5% tints on my rear windows (old car) so I need sensors to reverse. Thank you.
@escuamonify 2 жыл бұрын
Thanks for your explanation. One question. How do you read distance, if you mounted the monitor upside down on the inside roof?
@dial2fast 2 жыл бұрын
The practical way of using the system is listen to the beeps. Once the beeping gets really fast to almost constant, you know you need to stop. This is same way you use a factory backup system. Basically no need to read the little number.
@user-co8it9em2g 6 жыл бұрын
^^ Oh... Thank yoy for your video.
@dial2fast 6 жыл бұрын
Thanks for your comment!
@javidbankotkar6725 4 жыл бұрын
Thanks for the informative video. Can I fix this on front bumper? Please advise
@javidbankotkar6725 3 жыл бұрын
@Rama Nrusimhadevara Thanks
@Lukedawg1984 6 жыл бұрын
I was wondering how well these cheap systems worked! I was skeptical on buying one for the wife’s pickup truck! Looks like it works fine, only thing I’m worried about is will it have long enough wires to reach from the bumper on an ext. cab Chevy Silverado to the dash for the display?
@dial2fast 6 жыл бұрын
The sensor wire is 8' long (connecting to the controller box). The display module wire is 16' long.
@Lukedawg1984 6 жыл бұрын
dial2fast oh well this should be plenty then! Thx for the info brother
@j-waken2rem905 6 жыл бұрын
Nice video! Do you have to cut the reversing wires for you able to tap the red wire of the sensor? Im afraid to void my warranty if such wire cutting were involve. Thanks
@dial2fast 6 жыл бұрын
You don't cut the wire. You need to tap into the wire. Watch this video: kzfaq.info/get/bejne/q8eJl6aDz6rWZHU.html Go to 5:44 to learn how to tap a wire.
@j-waken2rem905 6 жыл бұрын
i See! thanks for this. Its a big help! all the best!
@nikolasvoisine170 6 жыл бұрын
Do you think this will work for my 4 door truck??? Like the length? With the bed?
@dial2fast 6 жыл бұрын
The sensor wire is 8' long (connecting to the controller box). The display module wire is 16' long. So with those measurement, you can see if it will work.
@suhailjamil3909 3 жыл бұрын
Great job, but by mounting the led display upside down on the liner, doesn't that mean the distance display digits are shown upside down? It looked like that on the final test you did at end of video?
@dial2fast 3 жыл бұрын
In reality you don't need to look at the display when using it. Just listen to the beep and beeps faster as you get closer. In all the years I have used it, I never look at the display and just listen to the beep.
@BORICUACHANNEL 2 жыл бұрын
Love it
@MrRangerZr1 6 жыл бұрын
Compared to factory sensors, how is this unit? Is it really sensitive? Can you control the warning noise level?
@dial2fast 6 жыл бұрын
+MrRangerZr1 These kits work very well. Just as good as factory. You don't get false alerts for no reason (when they work). You can't change the volume.
@MrRangerZr1 6 жыл бұрын
Looks like it has solid reviews. How's it working currently?
@dial2fast 6 жыл бұрын
Working fine, no issue
@dan_6915 6 жыл бұрын
MrRangerZr1 You can place the loudspeaker in a foam insulation, inside of the trunk plastic covers, just to dimm the sound. It is not necessary to watch the parking distance on the display.
@SHANUSHAH 6 жыл бұрын
I change the sensor kit on my SAAB with cheap chinese unit and found that it was faulty,so it may be good idea to test it before to put the bumper or test on bench before installation.
@adityahpatel 5 жыл бұрын
Hey, will it also work i.e. beep if lets say a person is standing talking on phone behind your car as you try to back up? In other words, does it detect only large stationary objects or people too? If latter, if that person starts walking sideways while you're backing up, does it still beep or does person have to be stationary in order for this thing to work? Thx
@dial2fast 5 жыл бұрын
It detects any objects including people, wall, pole, kids, etc
@Freehalllito 3 жыл бұрын
Thank you for the video. You don't get that much information from the instructions manual.
@dexter5715 2 жыл бұрын
how do you know where to make the holes?
@JunaidKhan-pc5ih 4 жыл бұрын
Very nice
@firstdown80 5 жыл бұрын
Just bought one. Thanks for the video. Anyway to adjust the volume?
@dial2fast 5 жыл бұрын
No
@kieranragan6641 4 жыл бұрын
Put some electrical tape over the speaker hole
@kengtong2617 11 ай бұрын
Thank Q
@uniqueautomationelectronic5696 5 жыл бұрын
Thanks pls show me brand & price?
@emmancabral4416 5 жыл бұрын
hi, i have parking sensor installed in my car and i tap in the reverse light wire, now im planning to add backup camera and need power source also, can i tap it in the same reverse camera and merge with parking sensor ?
@dial2fast 5 жыл бұрын
Yes you can tap an additional device to that wire
@moralesnery 2 жыл бұрын
I used your video to successfully install a 4-sensor parking system in my old Corsa. I have one question: Can I connect the black wire from the power line (the ground) directly to the car's chasis without using the existing cables? Is there any risk of discharging the battery If I do this?
@dial2fast 2 жыл бұрын
Yes you can connect the ground wire to a chassis ground.
@yousufshaikhful 3 жыл бұрын
Does the sensor work all the time ? Or just when you put it in reverse gear ? In my country people get stuck in traffic a lot. I would be deaf from that noise if it kept beeping every time a bike or car came close enough to my sensor. So do please answer.
@dial2fast 3 жыл бұрын
This is a backup sensor. Hence only on when car in reverse.
@hazlbri 5 жыл бұрын
I'm wondering if you put 2 sensors at the rear activated by the reverse, how could you activate 2 sensors installed on the front ?
@stephencutajar2548 5 жыл бұрын
You can but then you would have to connect it to a power source where it is activated when the ignition is on like the cigarette lighter but then it will be ON constantly unless you use a seperate switch that you can switch on when you are parking.
@1618maher 2 жыл бұрын
Thinking to do the same… is it a good idea?
@mpcp27 6 жыл бұрын
Nice one. I had a 6 sensor system installed 4 for the rear and 2 for the front corners. Since you installed the display upside down i guess you don't use the distance display and just use the beeping? I actually had installed a reverse and front camera too because the sensors can't be trusted to pick up everything. The rear corner sensors pick up anything the rear camera misses. The front sensors/camera comes in handy in close quarter parallel parking..Allows me to get much closer than i would if i was just eyeballing it.
@noelkennedy1769 6 жыл бұрын
mpcp27 I was going to ask about the display, noticed he had it upside down. I wonder if it can be opened and rotated. I like where he has it too. Nice idea since you're already looking back there.
@gaborlevenda2736 3 жыл бұрын
Hi it is a very helpful video but I have a little bit of concern about the product, especially the connection between the brain and the sensors. The sensors in the box have not been labelled or marked which one goes where to. Do you think it is going to be OK to use? or actually it does not matter how we set up the sensors and I can label it when the set up is done. Looking forward to your answer and God bless you
@dial2fast 3 жыл бұрын
You can label the sensors yourself before you install it. That way you know the order of the installed sensors.
@gaborlevenda2736 3 жыл бұрын
@@dial2fast thanks for the quick reply it is going to be very helpful for me have a good day sir
@sokol.murati 6 жыл бұрын
Can you do a video on electromagnetic parking sensors please. Those require no drilling. Very cheap. Looking forward to your answer.
@mpcp27 6 жыл бұрын
Sokol Murati The electromagnetic sensors i found required the car to get very close ( like
@dial2fast 6 жыл бұрын
+Michael Chong Thanks for sharing!
@xxrodneyxx 4 жыл бұрын
What template or measuring specs did you use for the holes in the rear bumper? Thanks in advance..
@dial2fast 4 жыл бұрын
On this Honda Odyssey, the inside of the bumper has markings stamped on it from the factory. I just used those locations. If you have a different vehicle, you can put painters tape on the outside of the bumper, then measure equal distance and height for each sensor (or match close to what location factory uses if it's an option).
@xxrodneyxx 4 жыл бұрын
@@dial2fast Thanks for the reply. I have a 2010 EX-L res/nav. I'll be looking for the marks on the inside of bumper. Thanks again!
@KENPOCHOPPER 2 жыл бұрын
Hi- i need to extend 2 bumper senors about 3 foot. What guage wire do you recommend? Ty
@dial2fast 2 жыл бұрын
Probably 20 gauge will work fine.
@oberek92 5 жыл бұрын
are the 4 sensors independant ? i.e. playing with the hand in front of each successively generates 4 corresponding bip series
@dial2fast 5 жыл бұрын
The 4 sensors are independent. The LED display has 4 different segments for the 4 sensors. The beep sound is the same for all 4 sensors.
@Engineer9736 4 жыл бұрын
Just the sensor with the smallest distance measurement is used i guess. Otherwise the system wouldn’t make sense. If there is a little pole behind the left of your car, you want to stop before that pole and not what is further away in front of the other sensors.
@rommelyares5501 4 жыл бұрын
My question is.. when you try the sensor while you where getting near, is the gear were on reverse position? Because I think you connected the wires at the reverse wires of the lights before it will activate. Right?
@dial2fast 4 жыл бұрын
Yes, the parking sensor only turn on when car in reverse.
@rommelyares5501 4 жыл бұрын
@@dial2fast thank you. Highly appreciated 👍😊
@shirlyannrivera2860 5 жыл бұрын
Hi i have a question
@ego.trip. Жыл бұрын
I cut these holes too big, since this saw was bad, now i have a litlle gap around sensor. With what I can fill it up? Black acryl silicon?
@dial2fast Жыл бұрын
Regular silicone or RTV silicone.
@tomf8784 2 жыл бұрын
Can it be connected to the 12v socket or does it need to be connected to the battery via crocodile clips?
@dial2fast 2 жыл бұрын
Neither. As stated in the video, connect power to reverse light.
@K_N_44 2 жыл бұрын
Will be readable if you put the display screen upside down?🤔
@josehamidundelasalas6049 5 жыл бұрын
Can you only just plug in the sensor and not the display? Will it still work?
@dial2fast 5 жыл бұрын
The display has the buzzer for the audio warning.
@jijeshkorothpoyil2697 3 жыл бұрын
Are these 4 sensors are two separate transmitter- receiver pair? One for left and one for right judgement? Or All are four separate combined tx+rx each? Regards
@dial2fast 3 жыл бұрын
Each sensor is a separate sensing unit. There really is no Tx/Rx as in data being sent. The sonar sensor probably changes resistance when objects get close to it.
@jijeshkorothpoyil2697 3 жыл бұрын
They are 40khz piezo electric elements. emitting short pulses of ultrasonics then capture echo. Then by doing math using microcontroller to estimate the distance to the reflection surface. As we know velocity of sound in air as around 340m/s There is an ultrasound transmission and reception.
@chopp7664 11 ай бұрын
Good vid but I only want the sensor on when reversing only when I put in any other gear it shuts off
@aryansanghvi579 4 жыл бұрын
Hey I got some, mine don't say ABCD so which one goes where?
@Tesla.Channel2024. 2 жыл бұрын
Can you calibrate the censor distance?
@dial2fast 2 жыл бұрын
No you cannot.
@grumpywolfgaming Ай бұрын
How is the sensor detecting you when walking up to it? I thought it was only powered on when the car is in reverse.
@dial2fast Ай бұрын
The car was put in reverse gear.
@mybestsmile19 5 жыл бұрын
Can you do it for me Odyssey, is complicated 😳
@chubbyluna4467 6 жыл бұрын
How long did your old sensor last before you need to replace it?
@dial2fast 6 жыл бұрын
After I took the old one out, I examined all the parts, and found 1 sensor to have gone bad perhaps with water getting into the sensor itself. The rest of the parts including control box was fine. I had that in the car for about 8 years.
@chubbyluna4467 6 жыл бұрын
8 years is not bad at all for that cheap price.
@huntershortrepairs Жыл бұрын
You were not kidding when you said "inexpensive" lol, didn't expect less than $20! I'm thinking of getting this for my Jeep Wrangler, pretty sure my rear bumper is metal with just a plastic covering, how well does that little hole drill handle metal?
@dial2fast Жыл бұрын
Just spray some WD-40 or other spray lubricant as you drill, and the drill bit should last for the install.
@huntershortrepairs Жыл бұрын
@@dial2fast good to know, thanks!
@mambrake 4 жыл бұрын
What is the size of the Hole drill bit???
@dial2fast 4 жыл бұрын
22mm
@IXxK3v1NxXI Жыл бұрын
It is there anyway to lower down the volume? i have it and i think is very loud.
@dcamvideos6907 Жыл бұрын
Put cover the beeper hole with a Tape
@jimpgamingtv2158 4 жыл бұрын
Can i connect the ground on the ground of reverse light
@dial2fast 4 жыл бұрын
The ground wire on the light is not a good ground. Connect it to an actual chassis ground.
@csavkoor 4 жыл бұрын
Where did you hook up the power line?
@markshearing5366 3 жыл бұрын
to the power cable running to the revering light .... Watch the video and its explained.
@merchiousmpinganjira9983 2 жыл бұрын
My front sensor got damaged, honda freed blue. How can I have access to the new ones for me to replace the old ones? In my country they are not available. Please help.
@ego.trip. Жыл бұрын
Aliexpress
Meta Cortex
Рет қаралды 48 М.
AutoFun
Рет қаралды 200 М.
Game Changer Amor
Рет қаралды 11 МЛН